8520 doesn't charge after soft reset

Hello,
My sister have a Curve 8520, she made a soft reset and now it doesn't finish charging, it gets to a little bit more than a half and it freeze there.

open ur bb-battery,check if the pins which touch the battery are ok..or slightly/gently clean them with a dry and soft cloth.-happened with me(other model,make)...if this fails,plz visit the nearest bb service centre and get ur battery/cell checked.all da best
Live long king size

Similar Messages

  • HT3728 after soft resetting how to set a new password to my airport express

    after soft resetting the airport exppress how to set a new password to my airport express

    Hello, MevanK.
    Thank you for the question.  You may find this article helpful in changing or creating a password for your AirPort Express. 
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    Jason H. 

  • Airport Extreme Freezes After Soft Reset

    Hi Everyone,
    I'm having an issue with the 7.5.2 firmware update for my Airport Extreme. We have several devices which use DHCP reservations and after updating to 7.5.2 I went in to change some of the IPs and other settings (using AirPort Utility). After making the changes I pressed update and the Airport started the reset, but the light just stays amber and I have no connectivity. I end up having to pull the plug and do a hard reset. After a hard reset, when I check the Airport, none of my changes went into effect.
    I have tried many times with different settings and it always does the same thing whenever I try to update the changes; it hangs during the soft reset without saving any changes. When I downgrade the firmware to 7.4.2, however, everything works perfectly.
    Any help would be appreciated. Thanks!

    I too have run into the same problem as ‘controls.freq’ although sometimes the light just stays amber (like controls.freq’s documented post) and other times it stays solid green after clicking "Update." No matter, the result is the same -- I have to perform a hard reset (pull the plug) of the Airport Extreme and none of my changes have been made. I not only run into this when trying to add static DHCP addresses (like controls.freq), but also when trying to add MAC addresses to timed access control lists, or (when playing around) trying to change my wireless network name .... honestly, it probably fails for many other changes too.
    So I tried what Bob suggested -- but no luck. A lot of effort but no reward. I tried loading 7.4 firmware (tried both 7.4.2 and 7.4.1 which ran more reliably in my environment) and then doing the factory reset, then upgrading to 7.5.2 and setting everything up. But after maybe one successful save of settings, all subsequent saves failed as described earlier. Then I tried a factory reset while running 7.5.2 and ran into the same problem after maybe the first successful save.
    The only reliable workaround is to DOWNGRADE to 7.4.x, make the necessary changes, and then upgrade again to 7.5.2. I must say ... if there were some way I could get the system to stop offering new code reliably (that doesn’t even work even when I tell it I don’t want to check for updates), then I’d just stay with 7.4.1 throughout the environment with success.

  • My iPad mini wont charge after I reset it

    IIPad mini will not ccharge after I reset all the setting and restarted the ipad.  It once said not charging and then charged and when I disconnected and connected it still doesn't charge.    If I calibrate the battery I'm afraid I cant get to charge again.  What should I do

    Here are the steps to activate an iPhone:
    If your carrier provided a SIM card, make sure it's in your iPhone.
    Restart the iPhone.
    Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
    Restore the iPhone.
    Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
    If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
    If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
    For more details, please read the guide: Get help activating your iPhone - Apple Support

  • Iphone freezed after soft reset

    after a soft reset everytime i try to start iphone is freezed on apple logo. tried many times (home+sleep). nothing. any suggestion?

    Plug it into a mains charger for a few hours and then try Recovery Mode... http://support.apple.com/kb/HT1808

  • IPod won't turn on after Soft Reset?

    My 8GB iPod Touch has been lagging and glitching a lot lately. So I did a Soft Reset, and now the black screen with the little silver Apple logo is on there, and stayed there for 30 minutes. If I press any button, it'll go all white and restart the reset.
    Now I've waited for about an hour, and it won't turn on. Plus it won't connect to my iTunes if I plug it into my laptop.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IShuffle doesn't charge after updating to iTunes 8.1

    I have the first gen iShuffle (1GB) & it's been working perfectly ever since I bought it last year but after updating my iTunes to 8.1 last week it doesn't charge nor play my songs in my iShuffle, it plays them in my Library but not on my iShuffle.
    I don't know why or what's the problem? because my iShuffle still works when I remove it from my computer, it's just when I try to play it on my comp it doesn't work.
    what should I do?

    The usb port is directly on your macbook. Some people have usb hubs which plug into the usb port to multiply the number of usb devices you can have. Like this one:
    http://store.apple.com/us/product/TQ776LL/A?mco=MzE2OTkyOA
    Think plugging in a toaster directly to the wall versus plugging into a power strip.
    Sometimes having a usb hub in the middle can mess with things... especially when the item draws power via the usb port. (like the shuffle does).
    If you have a hub....try plugging the shuffle in directly on the macbook and see if it helps.

  • Pages, Numbers and Keynote are "waiting" even after soft reset

    the 3 apps first "greyed" on home screen, did the soft reset (pressed home + sleep buttons). they kept "greyed" after reset, and I can't even see them in Purchased in app store.  the only way I can open them is to search for them in app store, and tap open.

    Please don't type in all capital letters. It makes your post harder to read.
    Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

  • Palm TX: Bluetooth settings lost after soft reset

    Hi all,
    all my bluetooth settings get lost, when I perform a soft reset. Does anyone have a hint which files are getting deleted or "updated" from the ROM so I can restore them from a backup? Or do you perhaps have a solution so that the settings won't get deleted?
    Thank you very much in advance!
    Cheers!

    I too have a problem with resets while using the Palm Bluetooth Keyboard 3245WW but i think my resets are only limited within Wordsmith when pressing the Delete/Del key. Try seeing if your problem is related to one particular key... though admitedly i use a T3 not a TX and i have read about others on the TX experiencing random resets. I am just wondering if it is tied to the Delete key like my problem.
    My fix for my problem was to stuff some paper under the Delete key so i wont accedentally press it while typing.

  • Restore after soft reset not working

    I'm hating my 5800 more and more by the day.
    I just did a soft reset in order to overcome the 'voice system error'.
    Then I did a restore of all the contacts, calender etc.
    What did it restore?
    NOTHING!
    Now what am I supposed to do?! Thanks again nokia...... 
    Nokia might know what they're doing with traditional 'mobile phones' but when it comes to smartphones they are clueless. 

    I went into 'applications' on the phone and did an update (of about 7 things)
    I then reapplied the restore and it's "working" now i.e. the contacts are back in place but it still gets the 'voice system error'
    however the stupid POS thing has seemingly lost all of the applications I installed
    again,
    THANKS NOKIA!

  • E6-00 RESTARTING AFTER SOFT RESET AGAIN AGAIN . HE...

    HY THERE
    I HAVE NOKIA E6-00. I MADE SOFT RESET AND I GOT A PROB. MY PHONE GETTING RESTART AGAIN AGAIN PLZ HELP ME TO SOLVE THIS ISSU

    Is there a SIM card in the phone? Is there a SD card in the phone?
    How fast does it restart? Immediatly or do you have time to type anything?

  • Iphone 4s doesn't charge after upgrade to ios7

    My iphone 4s stopped charing after upgrade to ios7. I thought this was caused by dirty charging port ,, but it isn't.
    I connect to my wall charger and it starts charging, but after a couple minutes it stops. The same issue when connected to my work PC. It only charges when connected to my mac !
    I tried several home chargers and the problem remains the same.
    I have this issue on both our household iphone 4s's ,!
    Help this is terrible and my battery survives half a day now !

    Same issue...ios7 upgrade...battery wouldn't hold charge...now it is dead...phone will not turn on or reset...
    When plugged into a Mac for 2 hours, with the original USB cord, screen is blank...when pressing the sleep button, I get a picture of a battery with a tiny sliver of red...but not able to turn on.

  • Ipad doesn't charge after battery warning

    After a battery warning, the charger that came with the iPad will not charge it. Message indicates that the charger will not work with the iPad. One has to shut down the iPad and then start it again. At that point the charger is recognized and the iPad will charge.

    If it says 'not charging' when plugged into the wall with the iPad charger, then your ipad may have issues. Try resetting it, holding the home and sleep key, past when you see the red power off and until you see the silver apple.
    If you reset it, plug it into the wall with its charger and you still get 'not charging' then it may be time to take it to the local Apple store and have them check it out.

  • Magsafe won't charge after SMC reset

    Ok so my MacBook Pro shut off in the middle of me browsing and when I went to turn it on the fans were at like 6200RPMs maxed out and the battery was "unavailable", yet I was running off battery power. So I did the little SMC reset with the shift-control-option and my macbook booted back up! Yay! No excessive fans and the battery showed 75% like it was essentially before. However it will not take a charge from my mag safe at all...great...I SMC reset 2 more times restarted, shut down, cold booted, and nothing....Battery is now at 28% after about 2 hours of trying to figure this out...I can't have my computer just not charge...I have papers for school due stat and all I can do is watch this things battery die slowly...I hate to be pushy but I sort of need an answer as soon as humanly possible as I can NOT I repeat NOT make it to a genius bar appointment in time..funny they just worked on my computer less than 3 weeks ago for a fan issue..ugh. Please I really need to know what to do to fix this..thanks in advance...

    Come on know one? I desperately need this computer to work and Apple support refuses to even talk to me! I'm in no physicial condition to make the drive to the Apple store and I rely on my computer for allot of vital things. I really need this fixed does anyone have a solution? I've honestly looked and tried and nothing.

  • PlayBook doesn't charge after OS update

    I have a serious problem with my BlackBerry PlayBook. It is not getting charged even though I connect it to the power for hours. I believe the problem started after the recent OS update. I tried both USB charging as well as using power cable, but there wasn't any change.
    I can turn on PlayBook and use it while the power cable is connected. The charging icon is also shown. But it is always showing 0% and the PlayBook get turned off soon after I disconnect power. There isn't any physical damages to PlayBook and power cable. Also it hadn't completely drained out before this problem occurred. After OS update even though I tried charging PlayBook while it has around 20% charge it didn't get charged.
     I read some other posts about holding down the power and volume up and down buttons. But it didn't work. Anyone know what might be wrong?
    Thanks in advance!

    Same problem here.

Maybe you are looking for

  • Viewing pdf files in Lion

    Upon upgrading to Lion, I can no longer view pdf files unless downloaded and then opened. When attempting to view pdf files in Safari all I get is a black screen. I am able to download most files and then view, but some sites don't have that option.

  • Propagation Problem

    Hi i am trying to propagate message from a queue in 8i database to a queue in 9i database.The problem is that i can see the message being enqueued in 8i database but the 9i queue is always empty.Is there any problem with propagation.How can i check i

  • Client no in SAP Business System name.

    Hello All, I am currently working on naming for the SAP PI objects. In my previous SAP PI implementations I used naming like  SIDCLNTNO ( f.e. DPECLNT110 ) and SAP Recommends that as well. However we faced problem while pointing the different client

  • How to transport BO report from Dev to Qas

    Dear all, We have three clients for BO, Dev,Qas and Prd. When we transport the BO reports from Dev to Qas, the  parameters in Universe and QAAWS won't be changed automatically,just keep the setting in Dev. what can I do to change the setting automati

  • Adobe Premier Pro cc is crashing on my Mac Pro

    I am using Premier Pro CC on my new Mac Pro desktop. It is powerful but the program is crashing frequently. I have reinstalled the program and rebooted the computer. What could be the problem? Thank you.