8520 won't enter standby when bluetooth connection is lost

Got a Blackberry Curve 8520 (OS version 4.6.1.305) and I got a little problem too. In my car I have a Hama Cruiser II bluetooth hands free set and if I'm connected to that and leave the car without turning it off (dunno if the problem also happens when I turn the bluetooth device off) after that I'm no longer able to enter standby mode with the standby button on top of the Curve 8520.
The only way to enable the standby button again is by turning the phone totally off and removing the battery for a few seconds, so that it does a "total reboot".
Is this a known issue or something new? Where can I place such bug reports?
Regards
Rainer

Hello rakoenig,
Welcome to the BlackBerry Support Community Forums.
In this situation there are a couple things that I would recommend. First try disabling Bluetooth on the BlackBerry Smartphone by going to Manage Connection and uncheck the Bluetooth option. Then try to enter standby mode.
The second thing you can try is wipe the BlackBerry Smartphone. To do this we would need to back up the BlackBerry Smartphone first. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once the BlackBerry Smartphone is backed up please follow the following knowledge base article to security wipe your BlackBerry Smartphone.
Link: http://www.blackberry.com/btsc/KB14058
After completing the wipe please test the BlackBerry Smartphone with your Bluetooth device. At that point you can perform a restore of the BlackBerry Smartphone.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

brand new/never been used iPod nano
Call Apple Care. You are still under warranty. You also have 14 days from the date of purchase to return your iPod with no questions asked.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

No tap/app sounds when bluetooth connects/disconnects

I've been chasing this for some time now. What happens is very similar to the posts others shared where the phone is not muted but the apps, notifications, ringer, etc behave silently. For me, I usually notice the phone vibrating instead of ringing or chiming for a message. When I unlock, there are no tap sounds as I enter the code and the keyboard is silent.
Today I noticed the phone went silent as I started my car. The bluetooth connected to the handsfree in the car and I lost sounds. I killed the bluetooth on the phone and sounds were restored. Something is wrong because it also happens when I connect my Jawbone headset, too. Interestingly, when I use the in-car or headset bluetooth to make a call it operates properly.
Running 4S 6.1.1

@SoCalJake
I've had this problem as well. I bought a Bluetooth keyboard at Christmas and have not had any sounds from my phone other than it vibrating since. I don't know if Apple is aware of the issue or not but disabling the Bluetooth feature when I do not need it seems to have resolved it.

MBP Won't Enter Standby

New MacBook Pro 2011 running Latest and greatest Lion. The computer will not enter standby mode unless the lid is closed. System Preferences is set to 1 minute. I used migration assistant from an older (2008) MBP pro to tranfer files, etc.
I did an install of Snow Leopard to an external drive and booted from that and it worked fine so I don't think it's a hardware issue.
Is there a configuration file that might be an issue?

VM Ware 3.0 is supposed to be compatible with Lion. I had the same exact problem before I installed Lion running Snow Leopard (latest version). I was hoping that Lion was going to fix the problem. Which it didn't. Like I said a fresh install of Snow Leopard on an external drive it worked normally so I'm thinking there is either another program preventing it or a configuration file isn't right or never got created. I'm guessing here. I really don't want to reinstall everything to get this to work.

On my MBP iTunes won't start automatically when I connect my iPhone or iPad?

Today I encountered the following problem om my MBP:
When I connect my iPhone 3GS or iPad on the MBP, iTunes (v10.2.2) doens't launch automatically.
After self-starting iTunes I can synchronise and so on.
Can somebody tell how I can change this behaviour?
The iTunes-option "Voorkom automatische synch.... van iPods, ..." --> "do not automatically sync ... iPods, ..." isn't enabled.
Many thx
Gerd

Hmmm..uninstalled, reinstalled, ran Software Update...something patched in iTunes, now works like a charm
Message was edited by: Ben Bernards

Silence Treasure Tag when Bluetooth connection is ...

Hello
I use my Treasure Tags only to find stuff that I've lost. I do not want to be notified when the connection is either lost or reestablised between the tags and my phone. If I leave my car keys with a tag (WS-2) attached to it downstairs on the counter and bring my phone upstairs they are just at the boundary of being able to make a connection. The result is that the tag sits on the counter either chriping that it was able to connect or has lost connection, all night long. Very irritating. I know I can manually disconnect the tags from the phone, but that is a hassle. I just want to silence the tag. If I want to find my keys I, of course, want to be able to play the tag from my phone.
Any ideas?
Morgan

Its not possible,just unpair it ..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Bluetooth connection gets lost

Hello, I have a lumia 2520 and a 620. When I pair them with bluetooth they connect, but before I can do something with them the connection gets lost in about ten seconds or so. Why is this and what can I do so the connection remains?
Solved!
Go to Solution.

As an example I want to upload a file to the phone.

InDesign CC 7 crashes when network connection is lost.

Hi all,
I'm trying to troubleshoot an issue with InDesign CC7. I tend to work on documents from our server at work, and each time the network connection is interrupted (I undock my laptop to walk around, switchover from wireless to wired, brief hiccup in the lan, etc) and I have an InDesign document open, I recieve an error message from InDesign that I've lost the network connection to the document (fair enough).
When I acknowledge that message, InDesign becomes unresponsive and crashes. You'd think that as soon as the network connection is reestablished (usually a fraction of a second), the connection to the document would be reestablished, or at worst, I'd have to do it manually. When I restart InDesign, I usually am able to enter recovery mode and get my work back, but on occasion, I lose quite a substantial portion of my work. This has lead to inaccuracies and duplication, becasue I think I've taken information out of one portion of the manual and put it somewhere else, but in reality, the information I removed has been replaced during the recovery process.
I don't understand why the program crashes each time a network connection is lost. The obvious answer is to work locally and save on the network, but I shouldn't have to do that to keep the program from crashing. If anyone has any insight, please let me know. Thanks.

You may also want to edit the advanced power settings on your computer to not turn off the hard drives, not put the computer to sleep, etc.
You can get to these settings in windows by right clicking on your desktop, select personalize, then screen saver in the lower right. Now click on the "Change power settings" link towards the bottom, then change the plan settings for the plan that is currently in use. You will then see the "change advanced power settings" link. I'm sure there is an easier way to get to it, that is just how I always do it and I tend to be a creature of habit
**edit** the other way is Control Panel -> Power Options
And also be sure to configure your network adapter so that windows can't turn it off.
Here is a microsoft link with a handy fix-it tool to automatically turn off the network adapter power management settings:
http://support.microsoft.com/kb/2740020

Mutt (IMAP) freezes when Internet connection is lost

Hi all,
I'm currently using Mutt to read my mail, which is fetched using
offlineimap from Gmail. It works fine.
I'm trying to set up the same configuration on a small
netbook. Due to hard disk space constraints I prefer not to
download the mail. Instead I'm reading it directly from the
server using Mutt's own IMAP implementation.
However, this doesn't work very well. I get frequent freezes when
I loose my wireless Internet connection. Basically, Mutt becomes
completely unresponsive and I have to suspend and kill it.
You can reproduce this behaviour by simply shutting down the
Internet connection while Mutt is communicating with the IMAP
server. It waits indefinetely and pressing any key does not have
any effect.
I've tried setting different variables to avoid freezes without
any luck. Below you can have a look at my .muttrc file. Any
suggestion would be greatly appreciated. Thanks.
set realname = "Foo Bar"
set reverse_name = yes
set from = [email protected]
alternates [email protected] [email protected]
set imap_user = $from
set imap_pass = "foo"
set imap_keepalive = 300
set folder = imaps://imap.gmail.com/
set spoolfile = +INBOX
set postponed = +[Gmail]/Borradores
set smtp_url = smtp://[email protected]:587/
set smtp_pass = $imap_pass
set copy = no
set certificate_file = ~/.mutt/certificates
set header_cache = ~/.mutt/cache/headers
set message_cachedir = ~/.mutt/cache/bodies
set sort = threads
set sort_aux = reverse-last-date-received
set pager_index_lines = 6
set markers = no
set edit_headers = yes
set fast_reply = yes
set connect_timeout = 5
set delete = yes
set beep_new = yes
alternative_order text/plain text/html
auto_view text/html
Last edited by gammel.holte (2010-09-16 17:17:04)

awayand wrote:mutt would rock if it didn't have this issue and an offline feature in addition to the already existing caching feature. I got rid of mutt when I realized there was no solution to get rid of the 5 second delay when launching mutt because it insisted initiating a connection instead of just launching and letting me decide when to connect to IMAP... I would go back to mutt in a heartbeat, but I guess until this is getting fixed I am staying with firefox...
I'm using offlineimap along with mutt to achieve roughly what you want and I couldn't be happier.
Besides, I'm also using notmuch (in AUR) to get super-fast Gmail-like search.
HTH,

ATV returns to home screen when Internet connectivity intermittently lost

I'm using Apple TV 2nd generation running software v4.4.2 over WiFi. I can watch about 3-4 minutes of video, or browse the Movies menu for about 3-4 minutes, before being thrown back to the home screen (missing the Movies menu) with an error message saying the Internet connection is lost. Then a couple of seconds later the Movies menu re-appears and eveything works fine for anoter 3-4 minutes. It makes the ATV unusable and it's infuriating. Any idea why:
- only the ATV complains about intermittent loss of Internet connectivity (my Mac and iPhone are on the same WiFi and never have any problem)?
- if there was loss of Internet connectivity for a few seconds, why doesn't ATV play from buffer, or even pause, instead of throwing me back to the main menu?
- eveything used to work fine before I upgraded to v4.4.2?
More importantly, what can be done to fix this?
Many thanks.

Thanks for this. Downloaded istumbler and installed on OSX 10.7. It crashes.
It can't just be a network issue: I have no problem streaming audio and video to a Mac, PC or phone on the same WiFi. And if the ATV software was designed correctly, it should just buffer - not bomb out - in case of an intermittent network issue.

How to get sound from phone when bluetooth connected

Easily paired my Plantronic bluetooth headset - piece of cake. However, if I'm not on the phone, I don't keep it on my ear. Sounds, except phone ringing, only come thru the headset whe it is on. I would like to hear the other sounds (i.e. notifications, text message alerts, other alerts) from the phone when my bluetooth headset is connected. It would be a pain to have to turn the headset on/off just to hear anything from the phone. I actually missed a meeting as the phone made no noise for my calendar reminder.
I would like the option of routing the tones/alert sounds to either phone or headset or just have it automatically do both.
Thanks
lawashbu

Im afraid that disconnecting your blue tooth devise would be the only answer to your problem im afraid that is the only way
Hope this helped
Freddie

No audible notifications when bluetooth connected to car

Hello I have a 2013 Hyundai Elantra and a iPhone 5 running iOS 7. When my phone is connected via Bluetooth and I'm listening to fm or xm radio my phone automatically places my text and email notifications to vibrate. Please help.

OK, I probably was being daft, as I think I've solved my own problem ... very simply. Thought I'd post the solution here in case anyone else is as slow as me.
I just did a bit of experimentation and it appears that if I quickly adjust the car volume control WHILE THE PHONE IS RINGING I can reduce the volume. I then tested after I'd made the change, and I don't think it's made any difference to the speech volume when in the call.
I'm happy with that. Sorry for posting a "non-question".
Regards,
Ian

When bluetooth connection or bluetooth crashes...

can i force bluetooth service to restart? when my bluetooth crashes my bluetooth keyboard stops working... and i cant restart my mac.. isnt there a way to force him to restart or something in the console?

Its not possible,just unpair it ..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HT204023 iPhone won't discover Mac for bluetooth connection for personal hotspot

Mac finds iPhone but iPhone won't find mac

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The Mac's BT stack is not equipped for this to my knowledge. I think that you need to use wi-fi.

8520 won't enter standby when bluetooth connection is lost

Similar Messages

Maybe you are looking for