8520 wont find orange network

8520 wont find orange network
ive done all i need to if i do a network search orange dont come up it was working before

If you simply can't find the network, that's a problem you should take up with Orange, or try from a different geographic area. Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Right now, there is a known data issue in Europe where you might be located, causing an outage of BlackBerry data for email, messenger, etc., but if you can't get a signal, that's a totally different issue.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Playbook wont find any networks

    I have  a blackberry playbook, i was using it this morning and i put it on standby and after a few minutes, my playbook lost the wifi network and woudnt find any wifi network what so ever. So i decided to security wipe it and then it wont go past the select network page as the playbook cant find any wifi networks.
    Please can someone help

    Where were you obtaining your wifi signal from, your own router or a neighbours router. Maybe the router shutdown. If you do not have physical access to your router, try an open source at McDonalds or Starbucks.

  • IPhone 2G wont find wifi networks

    Using firmware 2.1 and i have a wifi address in my information section. Sometimes it will find a wifi signal, which has a good connection, but it will disappear in about 5 seconds and if i look into the information on the wifi signal found all feilds will be blank. I already tried resetting the settings and reinstalling the firmware and it is still not working. Help please...

    I am having the same issues.  My macbook can pick up a number of wifi networks in my area where my iphone 5 is very limited.  Not sure what to do.

  • Why wont my iphone 4 find my network

    my iphone 4 wont find any networks! im on t mobile and it does not find it

    If you're unable to locate a nearby Wi-Fi network
    Check to see if the network is available by tapping Settings > Wi-Fi and choose from the available networks listed there. Note: It may take a few seconds for the Wi-Fi network name to appear.
    Wi-Fi networks configured as closed or private do not broadcast the network name to Wi-Fi devices.Join a closed or private network by tapping Settings > Wi-Fi > Other and entering the Wi-Fi network name, security, and password.
    Try restarting your Wi-Fi router by turning it off and then on again.
    Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings, including passwords, VPN, and APN settings.
    For the complete article: http://support.apple.com/kb/ts1398

  • My iPhone 4 with ios7 wont find any wifi network any solution?

    I recently changed my screen and after that my iPhone stoped finding WIFI networks I tried reseting it, puting it in the freezer reseting network settings and still nothing. Any other solution you may have?

    If you had Apple replace the battery, then you can take it back to have it checked. If you opened the device yourself, then all bets are off. Cannot get help here.

  • My Ipod Touch will only search for available Wifi networks for a second then stop, and it will never find any networks anywhere.

    OK I own the 1st generation Ipod touch and granted I bought it used and its pretty old, but the Wifi doesnt work at all. When I click on the checkmark box it turns on and it looks like its trying to find a connection, but it only tries for one second (literally) and then stops trying to look for a connection. It wont bring up any connection to choose from no matter where I go, it wont find one connection. Please help me this thing is driving me insane. I was told it could be a bad IP address, and that there is a way to get a new one. But How? I already reset it and restored it and nothing seems to fix it. So now I dont know what to do with it now.

    So you also rebooted your router correct?  Does the iPod still connect okay to other networks? 
    B-rock

  • HP 8610 wont find Ipad

    I have tried the solutions already posted for not able to print from Ipad and the Ipad still wont find the Air Printer.
    I have a new HP 8610 and I can print using the HP e print from the Ipad and the desk top PC work perfect. The printer SSID is the same, the internet is connected, the IP address is 192.168.1.106 on the ipad and 192.168.1.107 on the printer. Could this be the issue?

    Hi @skater1 
    Your IP address do not look problematic at all. Please complete the following steps and let me know the outcome;
    Solution one: Restart all devices and check network connections
    Follow these steps to restart the router, Apple device, and HP printer, and then check the network connections.
    Step 1: Turn the router, the Apple device, and the HP printer off
    Follow these steps to turn the router, Apple device, and the printer off.
    Turn off the router. Check with the router manufacturer for instructions on how to turn off the router.
    NOTE:Do not reset the router.
    Press the Power button to turn off the HP printer.
    Turn off the Apple device.
    Step 2: Turn the router and the printer back on
    Follow these steps to turn on the router and printer again.
    Turn on the router, and then wait 30 seconds to let it complete its start-up process.
    Turn on the printer. Wait until the initialization process completes.
    NOTE:Do not turn on the Apple device yet.
    Step 3: Make sure that the printer is on the network
    Follow these steps to make sure that the HP printer is on the network.
    From the printer control panel, print a Network Configuration Report. Consult your manual for steps if you are unsure how to print this report.
    Check the Active Connection Type in the General Information section on the report. The connection type should be Wireless.
    Check the status in the 802.11 Wireless section on the report. The status should be Connected. The printer IP Address also displays in the 802.11 section of the report for active wireless connections.
    Make sure that the Network Name (SSID) on the report is the same as the name of the wireless network for your networked printer.
    If the HP printer is connected to the correct wireless network, continue to the next step.
    If the HP printer is not connected to the correct wireless network, go to HP Customer Care , type your product number in the search field, and then browse to the support document about how to connect your printer to a wireless network.
    Step 4: Turn on the Apple device and check the network connection
    Follow these steps to connect the Apple device to the network.
    Turn your Apple device back on.
    Tap the Settings icon ().
    Tap Wi-Fi.
    Make sure that Wi-Fi is set to On, and that there is a checkmark next to your wireless network name.
    Move your Apple device as close to the router as possible, but no closer than 6 ft (1.8 m).
    Return to the Settings menu, tap General, and then make sure that Bluetooth is set to Off.
    Try to print.
    If the issue persists, open teh following document and skip to solution 2, as you can see this document is the resource of the steps above; What if a 'No AirPrint Printers Found' message displays on my Apple device?
    Please let me know the outcome of your efforts, thanks.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Clean install on MBA and wireless doesn't find any network..

    Hi,
    Helping a friend fix her MBA. 
    System would not get to the desktop at start up. spinning wheel. 
    From a bootable flash, Lion drive, repartition the HD and installed.  No errors, no problems. 
    Made sure the bootable drive was done correctly and redid it. 
    after a few tries of find a network, including mine. and no luck.  deleted WiFI connection from the network settings and re-added it and nothing.
    Made a bootable flash Snow Leopard drive to downgrade.  Again deleted/recreated the partition first and than installed and this time the system wont start from the flash drive. I recreated the bootable flash 3 times and nothing.
    Am I missing something ?  why does it start installation from a Lion flash drive and ot a Snow Leopard flash drive ?  and to add to it.. I used the same flash drive.. only had one at the moment and could fit both SL and L at one time.. so I had to recreat it them a few times... LOL. annoying.
    Any ideas ?
    Thanks.

    Yeah I think the printer's radio has died.  It is not user-serviceable and I have no idea how you would get parts.
    To verify the radio status, on the front of the printer go to Setup > Network > WIreless Network Test Report.  This report will self-test the radio.
    While maybe not ideal, another option is to plug the printer into your router using an Ethernet cable.  It will function the same as it did on wireless and even wirelessly-connected computers will be able to print to and scan from it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I can turn on personal hotspot but my devices cannot find the network

    Hello!
    I have tried everything... The problem is: I can turn on my hotspot from my iphone 5, 32gb, ios 6.1 BUT any of my laptops, ipads, ipod or even my wifes iphone wont find / see the hotspot when i try to search for it.
    I also have iPad 3 16gb, with cellular and i can turn this ipads hotspot on and all my devices can connect into it just fine, so the problem is on my iphone.
    I have tried:
    - full restore and then restore from back up
    - reset network settings
    - reset all setting and then restore'
    - restore as a new (so no faulty configs restore)
    - turning of and on multible times all my other devices.
    Waiting for a solution!

    have you tried following these kbase articles?
    understanding personal hotspot
    http://support.apple.com/kb/ht4517
    troubleshooting personal hotspot
    http://support.apple.com/kb/ts2756

  • My BlackBerry Curve 8520 Wont Turn on With No LED

    My Blackberry Curve 8520 Wont turn on and there is no LED flashing, i have tried pretty much everything and nothing seems to be working, tried a new battery, tried using the USB and the mains charger, tried leaving to charge for 8 hours, is there anyhing i can do to fix it myself as i dont have themoney to replace the phone or pay for a repair
    PLEASE HELP ME
    Thank You 
    Nathan

    Hey hakmilton,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest contacting your network service provider to look at possible repair and exchange options.  Since you tried a new battery and the LED won't come on, we can not even try reloading the device software.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Cant get chooser to find my network printer!

    I was wondering if someone can help me..
    I've tried everything on my OS 9 G4, but cant seem to get the Chooser window to select my HP PSC 1210 printer. It shows it in the left window but is greyed out. My ethernet is working perfectly. I have the printer hooked up to my OSX MacBookPro and that goes to my D-link DI 624 router and another Ethernet cable goes to my OS 9.2.1 G4 quicksliver. A printer icon is placed on my desktop but it cant find the network.
    I'm stuck ANny help would be greatly appreciated.!!
    Thanks / Alexis

    Hi! You'll have better luck posting this in the OS9 area. Tom
    http://discussions.apple.com/category.jspa?categoryID=99

  • I've recently purchased a second hand iPad 2 and it is locked to the Orange network. How can I get it unlocked without paying on top of what I have already done for the device?

    Hi, I have recently purchased an iPad 2 and only just found out after trying to use a Giffgaff sim card that it is locked to the Orange network in the UK. I don't want to be paying any extra over and above what I have already paid so my question is, is there any way to get the iPad carrier unlocked via apple or orange.  I am waiting a call back from apple today and have read on the web that orange will charge me to unlock it.
    Thanks for any help you guys can offer

    Some iPads which were subsidized by the carriers are locked to the carrier, and in that case only the carrier can authorize an unlock. You'll need to talk to Orange, and pay their fee if necessary. They may well only unlock for the original purchaser, in which case you'll need to contact the person from whom you purchased the iPad. Apple can do nothing directly in the matter, since they can only issue the unlock when the carrier provides authorization.
    Regards.

  • I got my Iphone4 from orange network at uk. Now my contract has finished and I want to use new sim into my Iphone4. How can I do that?

    Hi dear,
    I have a contract Iphone4 mobile from Orange network in UK. My contract has finished on 24/03/2014. During the contract I broke my Iphone4 which was given by orange company. After I broke my Iphone4, I claimed it to my insurance company to get my new Iphone4 and I got a new one.
    I want to use this Iphone4 with my new SIM which is from O2 network in UK. Also, I want to use this Iphone at my country(Bangladesh). I tried to use it with my new sim but my Iphone4 does not support it. Please help me out to solve this problems

    YOu would need to contact Orange and have them unlock your phone.
    ONly the carrier that the phone is locked to is authorized to unlock it.

  • Lumia 900 can´t automatically find a network and s...

    I work at sea and there´s often weak signal and roaming operators are changing as we move. Despite that I have automatic search on I still often need to pick up the network manually. Many times we´ve been close to the shore and the signal has been strong by then so the problem doesn´t appear only when the coverage is poor. All the other phones onboard can find the network without any problems. Rebooting my phone doesn´t help but I have to choose the network from the menu. Does anyone have same kind of problems?
    Once after charging the phone whole night it switched off in the morning. The phone woke up only after I put it to the charger again. The display showed full battery, so it had charged during the night. This has happened only once so I don´t know if there´s something to be worried about or not.
    Then some other comments, although many of those has been discussed already earlier:
    - calendar, monthly view is way too small. Syncing with computer shouldn´t require logging in and internet connection. It should be possible to manage calendar tasks when the computer is offline and then sync with the phone by Bluetooth, USB-cable etc.
    - display, the brightness isn´t enough on sunny days.
    - there should be call time, SMS/MMS and data counters
    - Isn´t it possible to save SMS drafts?
    - Isn´t it possible to switch off the alphabetic titles on application menu? I mean it´s enough that all the apps are on alphabetic order but I don´t need the letter grouping, it´s just taking too much space. (e.g. N: Nokia Drive, W: Weatherproof etc.)
    - Zune is not user friendly. The old Nokia Suite worked better, especially it was easy to find how to make and restore back ups. Now I have to back up contacts separately, is that correct?

    Hi beeb72,
    Thank you for your post and welcome to the forums!
    To synchronise your custom folders, open the mail inbox on your phone, scroll the bottom menu open and select folders. This should give a list of all available folders (if you cannot see all of them just click show all folders), then just select the folder and press synchronise this folder.
    If you cannot see the same folder structure than on your laptop, make sure that you have created your folders on the email server side. 
    Hope this helps!
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Photosmart b209a can't find wireless network.

    I've only had this printer for three days. The "Easy One Button" process to get it to find a network failed. It cannot find my wireless network.
    I'm using XP Professional on my laptop. McAfee Virus scanning and Firewall. (Not that it matters if the printer can't find the wireless network)
    I have a DSL D-link router with NO MAC filtering and yet when I print the Wireless Network Test Report it gives me this whole spiel on MAC address filtering and asks to add the MAC address of the printer to the router... but there's no offered solution if MAC filtering is turned off.
    I've changed my router security key from WEP to WPA-PSK.
    I've managed to get it to connect twice... and to print a test page on separate days. I have no idea what it is I do that gets it 'online' but it doesn't seem to last.
    I have spent several hours over the past three days (wasting entire days) trying to work out what the problem is. I have read forum posts; I have googled for solutions. The troubleshooting guide for the printer seems hopeless.
    The printer is on the same desk as the router with only a computer monitor between them.
    When I print the HP Network Configuration Page it states the status of the 802.11 Wireless is "Disconnected". The printer's wireless light is on, showing that the wireless radio is working on the printer.
    I bought HP because my last printer was HP and it was excellent (but not wireless). If I can't get it to go online, seriously, I'll take it back and exchange it for a different brand of printer. All I want is a printer I can print to wirelessly, is that so hard to ask? Yes, I'm getting really frustrated here. I live in a rural area and I don't have access to geek friends or a computer professional or anything like that and returning the printer requires a two hour drive so I have to be as self-sufficient as possible. Please, try not to use too many technical terms. I can understand some but not all and if anybody can help me, please be clear in their instructions (ie, don't just say 'go to setup blah blah blah' without saying which setup you're talking about.)
    Thanks for any help. It is appreciated.

    Yes, the desktop is connected to the router with an Ethernet cable.
    Yes the laptop is wireless.
    The printer is connected to the router via wireless (which I've already stated, it keeps losing the wireless network).
    If I don't have my printer connected to the desktop via cable, then I won't have any printing capability at all, because, as I just said, the printer keeps losing the wireless network! I need at least some way of printing when the printer can't find the network (even though the wireless network is working perfectly fine).
    So, desktop connected to router with cable.
    Laptop is wireless
    Printer is wireless for laptop use (but it keeps losing the network and therefore is totally useless in that respect)
    Printer is connected to desktop via cable to enable printing because of wireless continuing to lose connection to wireless network.
    In fact my printer hasn't been able to connect to the wireless network for 2 days now... even though I'm currently connected to it on my wireless laptop.
    Sometimes the printer finds the network, sometimes it doesn't and when it does, if I try to print from the laptop wirelessly, the printer loses the network.
    This really is poor product and the installation manual might as well be used for toilet paper for all its worth, same with the 'help' feature on the disk. I only chose HP because I was familiar with it, since my previous printer was HP and reliable (but not wireless). I'm seriously wishing I'd purchased a different brand.
    I'm not an IT tech, but I've managed to be able to connect modems and routers and other peripherals to my network without too much hassle at all... until now.
    I'm sorry if I sound angry but this is completely frustrating. I spent good money for a product that I am unable to use for the main purpose I bought it! I'm reduced to saving things to USB sticks and physically taking them to the desktop computer and having to print from there.

Maybe you are looking for

  • Does the Drag and Drop in 6.1 publish as HTML5?

    Is the new drag and drop functionality in the Captivate 6 update HTML5 compatible?

  • Lightroom 4 book problem

    Hi, I just paid for Lightroom 4 after running out my trial and discovered a problem in the book module. I was editing a photo in CS5 and the book went squirrelly. Duplicated parts of pages and inserted them overtop of others which deleted the origina

  • Mail app memory leak affecting business productivity

    Ever since upgrading both my 27" iMac (late 2012, i7, 3.4 Ghz, 32 Gb RAM, 3 Tb hybrid HDD) and my 15" MBP (late 2011, i7, 2.5 Ghz, 8 Gb RAM, 750 Gb HDD) using Mail has become almost impossible. Both machines experience severe memory issues when using

  • Two finger right click on g4 ibook

    Hi guys, I just got an ibook g4 and was wondering if there is such an option or program I can download in order to be able to right click using two fingers on the scroll pad like the MB and MBP.

  • How can I upload  again a empty song

    Hello, I'm having a problem with an AAC file of my band (not yet released on the store) that got uploaded empty on the first days of iTunes Match. This AAC is totally empty, and when my devices trie to play it, they stuck on it or just skip to the ne