8530 is auto redialling upon connection to MotorolaRoadster 2 bluetooth

Upon connection to my new motorola roadster 2 blueteooth, my blackberry curve 8530 is auto redialling the last known #. I have reset the device and even exchanged it for a new one and the new one is doing the same thing. Even if there is no call history in my phone. It happens on power up and if I come back into range of my blue tooth. Please help.

I have a 2006 A8 and had similar problems until I loaded the last iPhone update; Bluetooth is now rock-solid. Check with your dealer and make sure your car has the latest Audi updates. On my car, Bluetooth settings have a delay setting. Make sure that is turned on.

Similar Messages

AnyConnect failing to auto-update upon connecting, requires a re-install

We recently upgraded our 5510 at one of our clients to ASA software version 9.1(5), and after that was up and running and stable, we decided to upload the newest AnyConnect package files to the firewall for VPN users to get updated to the latest version.
The VPN connection is setup with radius authentication, and it has been working perfectly for a few weeks now. But just to add, when we had 8.2(5) software on the ASA and would put newer versions of the web deployment package on the ASA, clients trying to connect via VPN would auto-update without a problem. Same with Mac's.
So with the new software on the ASA, I ran a test from my home office, I uninstalled AnyConnect and installed an older version, 2.5.x. I then tried to connect via VPN with the thought that it would automatically update my VPN client to the version of the client on the ASA which is 3.1.05178. I watched it connect, ask for my active directory credentials, it would connect, then check for updates, and then say it was downloading an update. Shortly after, AnyConnect popped up a window saying "The VPN Client Agent was unable to create the interprocess communication depot." and I have to click Ok. Basically what happens here - http://www.itsystemadmin.com/the-vpn-client-agent-was-unable-to-create-interprocess/ but I do not have ICS turned on on the network adapter or any of my network adapters.
After clicking ok, it shows me the AnyConnect window, but the program is now partially non-functional, it is there, but the connection address is gone and if I enter it and click "Connect" it gives me an error immediately.
What I then have to do is go onto the ASA, remove that newer package and upload an older one. Then I re-install the VPN agent on my computer and re-connect, it doesn't find any update because I'm now running a newer version on my computer than the one that is on the ASA, and it connects fine.
I've tested this with a few employee laptops and they experience the same thing. I'm not sure if there is something that isn't compatible between this latest ASA software and the 5510, or what the issue is. I have tried putting slightly older versions of the web deployment package on the ASA and I still get the same problem. The problem is when the client computer is running an older version of AnyConnect and the ASA has a newer version, it fails upon initial connection and ruins the AnyConnect program and it has to be re-installed.

Feel lucky. Lot of people are having wifi problems with 8.x.
You should try to update from iTunes. iTunes requires less space on your machine for the update.
Robert

Disable AnyConnect auto install upon connection

Hi,
How do I disable downloading a newer AC client when connecting?
We are having all sorts of problems with a newer version not installing on Windows 8.0
Thanks.

You can disable the auto update by modifying the profile
Q. Is it possible to turn off the automatic AnyConnect upgrade via ASA?
A. Yes. Use one of these methods in order to turn off the automatic AnyConnect upgrade via the ASA:
Adjust the profile on the ASA to disable updates.
“false”
Use a local policy to disable the AnyConnect downloader.
BypassDownloader
true
The client does not check for any dynamic content present on the ASA,
including profile updates, translations, customization, optional
modules, and core software updates.
true
http://www.cisco.com/en/US/products/ps8411/products_qanda_item09186a00809aec31.shtml

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

No event in Udev upon connecting a DVI-HDMI display

Hi all!
Im pretty new to Archlinux and sarted "linuxing" generally not so long ago.
Arch is my latest stop and love-for-first-sight, learned a lot from its wiki and forum.
I tried to cook (honestly more like copy) a script today to let KDE (xrandr) automatically configure my TV, which is connected with a DVI-HDMI cabel through a HDMI switch.
As per instructions i tried to check out its proper name with
udevadm monitor
but there r absolutely no events in it.
Im guessing thats why my script isnt invoked upon connecting/disconnecting.
Also, even if i connect/disconnect TV, KDE generally does not get it untill i let Display Settings run or
xrandr
from terminal.
That means if i disconnect, then reconnect, my settings r still the same. If i run any of them in the while, or boot up Linux so that my TV is turned off, i loose my settings.
Is that normal?
What can i do that i can get udev events?
Thanks a lot for your help guys in advance!
EDIT:
Two more things
Disconnecting my primary monitor shos nothing as well at udevadm monitor.
Interestingly DVI-0 is my TV with DVI-HDMI connection
HDMI-0 is my primary monitor with DVI-DVI connection.
Kinda weird.....
Last edited by dragonreborn (2014-08-11 21:50:18)

dragonreborn wrote:What can i do that i can get udev events?
Fix the driver in the kernel to broadcast uevents on HPD handling.
Last edited by falconindy (2014-08-11 22:00:31)

How do you turn off Auto-Sync without connecting the ipod to PC?

My Purchased Tracks was deleted off my computer, but I still have all of them on my ipod. I have iTunes 7, so I am aware I can transfer all my purchased music from my ipod to itunes. But I know auto-sync is set up, so when I connect it to my computer, won't it automatically sync itunes with my ipod and therefore delete my purchased music on my ipod? Can I turn off auto-sync without connecting my ipod?

A couple of ways...
Hold down the Shift + Ctrl keys when you plug in the iPod. (For a PC)
Or...
Connect your iPod, but before it starts to sync, click that little X on the right hand side of the ITunes display at the top of the page. (Next to the "Do Not Disconnect" message.)
Then click box at bottom that says manually manage music.

AUTO START WHEN CONNECTED

AUTO START WHEN CONNECTED In Backup, NAS to USB AUTO START WHEN CONNECTED: What does this actually mean, in BACKUP of Dashboard? Will it auto sync every time a change takes place on the NAS? Or must the USB be removed and reinserted into the USB port on the MCM?

No, the clue's in the name It's a one-off single process, just triggered by the drive connection rather than by manual starting via the dashboard. When you connect the drive, it will trigger the backup, which will then proceed to the end and stop just as if you had manually started the backup. But at the end, if you want to backup again, you have to either manually restart it or disconnect and reconnect the drive. As it stands today, there is no "auto sync" option within the dashboard between the built-in drives and USB connected ones. It can be set up using SSH and a cron job, but that will be messing aroud with the NAS at the base command line level and will probably invalidate your warranty if things go wrong. Have a look through the suggestions thread as this kind of question (sync'ing in general, not specifically NAS<>USB) comes up quite regularly and has probably been made there, where you can support it and comment yourself.

Iphone not auto syncing when connected

i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens.
when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

I've always had to open iTunes, then plug in phone for it to see it. I've never been able to just plug in my iPhone and watch iTunes get pulled up automatically like with my iPod. I just figured this is normal.

Auto-Start Slacker or Pandora on Bluetooth Connect

Does anyone know of a way to auto-start Slacker, Pandora or any other internet music app for that matter each time your phone connects to a bluetooth device.
Right now I have my Iphone4 auto-connect to my Pioneer AVIC D3 in my truck and I would like it to start one of those apps each time it makes a connection. My Verizon Iphone4 is running 4.2.8 (8E401)
Thanks!

Check the SmartConnect settings

IPhoto duplicating photos upon connecting iPhone

Mac OS X Yosemite 10.10.1
iPhoto 9.6
iPhone 4S iOS 8.1.2
Upon connecting my iPhone to my MacBook to import photos, iPhoto displays duplicates of every photo.
This problem manifests itself regularly (though not every time) and began after upgrading to OS X Yosemite.
Any thoughts on cause / solution?

See this discussion:
iPhoto duplicating photos upon connecting iPhone
Are you shooting HDR or Burst photos?
If not, It seems to be a new bug, with no known clear solution.
The latest theory is, that dismounting the iPhone and mounting again will make the duplicates vanish from the import window.

Upon connecting iPod I get BSOD

I have a new 5th gen iPod and connecting it to my husband's computer works fine. Upon connecting it to my system (both iPod and iTunes are at current versions of software), I do not get the popup window for a new USB device (as I get on my husband's system) and shortly thereafter I get the BSOD on my computer. It is a laptop, and I've tried deinstalling the USB devices and letting Windows reinstall them. I've tried a few other things in the help forums, but nothing has worked, including deinstalling and reinstalling iTunes, resetting the iPod itself. Obviously this is a problem on my laptop, but I don't have any new ideas where to look.

hi stophammertime,
Welcome to the Forums.
It looks like you have some bad sectors on the HDD that's why the OKR didn't work or for some reason, OKR worked but the bad sectors corrupted the OS installation files. To verify this, you will need to run diagnostics on the HDD (try ultimatebootcd as it has diagnostic tools for ever brand of HDD's)
Also, the OneKey Recovery runs on a hidden partition on the HDD (usually the last few sectors of the drive). It's possible to trigger the OneKey Recovery if the partition structure isn't damage but if the target drive has bad sectors (i.e. Drive C:\), it may fail to image the drive or corrupt the installation files.
If verified that you have bad sectors on the HDD, you will need to replace the HDD and from here, you can:
1. Use a recovery disc to restore the default OS (this is only psosible if you have created one using this method)
2. If you can still read the COA product key at the bottom, you can burn an ISO copy on this website and use it to clean install Windows into your PC (if you get issues activating Windows, try to activate by phone).
3. Scratch Windows and use Ubuntu as you're primary OS.
Hope thish elps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

Auto redial feature in Q10

Is there an auto redial feature in the Q10?
If yes, how is it activated?
Thanks

There is no such feature on OS 10
OS 7 was way better in terms of handling calls.

Auto Redial

Hi,
I Skype call people to their Skype client, without difficulty. I have been experience dropped calls to Australia. The call auto redials. However, the audio is not working on one or the other Skype clients. I must shut down the Skype client on my end and startup the client, for the call to work. I guess the previous call does not completely clear before auto redial engages another call, causing a hung session somewhere between me and Australia. Additionally, after this turn of events occurs, the new call will only last a few seconds before dropping again. I guess this is network availability between me and Australia. However, the other person does not know the call dropped. The auto redial feature is of little, if any, value at this point.
How can I disable auto redial, please?
//SHD//

Nope
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can I auto redial on my iphone 4s

Is it possible to set up auto redial on my iphone 4s?

the only way that I know is to hit the Call button and the iPhone will present you with the last number you dialed. Tap the Call button a second time and the iPhone will redial that number.

8530 is auto redialling upon connection to MotorolaRoadster 2 bluetooth

Similar Messages

Maybe you are looking for