8530 Track Pad and E buttone not working, also lines in photos.

Device info
Your carrier: SPRINT
Model info and OS version: Curve 8530 5.0 Bundle 1675 (just upgraded)
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 106575952
Did a battery pull fix your issue?: No
Apps installed and their version if possible. (Go to Settings, then Options, then applications): None
BT device model/version (you will have to look at the BT device): None
Scroll pad works on and off, will not work on some menus. E key will work sometimes, usualt types an upper case E and not a lower case, will not type 2 E's in a row. Works ok when typing a 2. There were some other buttons giving issues a while ago and then it all went away and now this just started again out of nowhere. I tried backing up / wiping the phone, upgraded to the latest software and it is still giving me issues. The phone has never been exposed to any sort of moisture, I don't even use it in the rain.
Another issue, possibly related, possibly not is that I get 1 vertical line and 1 horizontal line in my photos I take. This started out happening sometimes and not other times but now it is constant.
Thanks for any help / suggestions you can give.

Is the phone still under warranty? If so, I'd contact Sprint as this sounds like its probably a hardware issue (especially if updating the software didn't help). If the phone isn't under warranty any more, let us know and we'll see if there is anything we can come up with that could help.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Similar Messages

Suddenly my double click both on track pad and mouse is not working

suddenly my double click both on track pad and mouse is not working.in System Preferences,track pad, i have ticked and unticked the Tap to click several times.Restarted the mac for several times at well but still i do not have double click.help me please.

It might be the double click speed setting.
Look in System Preferences > Universal Access > Mouse & Trackpad tab > Trackpad options.. button > move the double click speed to the slow side of the range.

Padding and margin does not work in div.

padding and margin does not work in div.
though design field shows me padding effect, but at the web browser it does not work.
please let me know how to deal it.

Your HTML code is missing a closing div. I have just done a rough check on it and came out with this code:
<div class="wrapper">
<div class="container1">
<div id="header">

<img height="45" src="n_image/coaraSmall.jpg" width="53" /></div>
<div id="top">
<div id="top_inner1">
    <div id="top_inner2">
    <div id="top_inner3">
      <div id="top_inner4">
      <div id="slider1">
        <a class="buttons prev" href="#"></a>
        <div class="viewport">
        <ul class="overview">
          <li><img src="n_image/nora_big.jpg" /></li>
        </ul>
        </div>
        <a class="buttons next" href="#"></a></div>
      </div>
      </div>
    </div>
    </div>
</div>
<div id="menue">
<div id="menue_inner1">
    <div id="globalnavi">
    <ul>
      <li><a href="#">Home</a></li>
      <li><a href="#">Song 4 Happy</a></li>
      <li><a href="#">About</a></li>
      <li><a href="#">Contact</a></li>
      <li><a href="#">Other</a></li>
      <li></li>
    </ul>
    <div class="c-both">
    </div>
    </div>
    </div>
</div>
</div>
<div class="container2">
<div id="main">
<div id="main2">
    <div align="center">
    <img height="297" src="n_image/noira002.jpg" width="600" />
    </div>
    <table class="category_01">
    <tr>
      <td>
      <img height="178" src="n_image/noira002_1.gif" width="180" /></td>
      <td>
      <img alt="" height="178" src="n_image/noira002_1.gif" width="180" /></td>
      <td>
      <img alt="" height="178" src="n_image/noira002_1.gif" width="180" /></td>
    </tr>
    </table>
    <div id="step">
    I hope it is going to be good. </div>
    </div>
</div>
<div id="footter">
<div class="inner">
    <div class="footerLogo">
    <img height="92" src="n_image/side_rogojpg.jpg" width="150" /></div>
</div>
</div>
</div>
</div>
You need to copy and paste the above code in the body of your editor window and the css styles will start to work again.
Please note this is a rough check only so you need to see if the closing div tag is in the right place.

Cancel and Exit button not working

Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby Jacob

Hi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
   MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
   MODULE EXIT_SCREEN INPUT.
       CASE OK_CODE.
      WHEN 'EXIT' .
            LEAVE TO SCREEN 0.
      WHEN 'CANCEL'.
      ENDCASE.
   ENDMODULE.
This will surely work.
<b>reward if Helpful.</b>

Youdo inc. Apps Like Matrix music Pad And Tangible-GP Not working under OS4

Youdo inc. Apps Like Matrix music Pad And Tangible-GP Not working under OS4. Is there possibility that apple will contact with them and ask to repair it. I paid for it and i want that working. Plz do something. Sorry for my english still learning. (:

You need to contact the developer and tell them to update their applications. Apple won't.

HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

Power button and home button not working and dont have warranty

power button and home button not working and dont have warranty

I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.

My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!

My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!!

Those are hardware issues. You can try all of the software troubleshooting if you want. Restart, reset, restore from backup, restore as new. If that does not work, then your only option is to pay someone for something. The decision is up to you, but I've provided the options.

My MacBook's built in touch pad and keyboard is not working.

Hi.
Am using a MacBook. It was working perfectly before i plug in a Non Apple USB standard keyboard
into it. when i did that,an error occurred like "please pressing the just after the Right Shift Key Button"
but there was not such kind of button on that keyboard.so i pressed the Shift key instead.
it works that time,but after some time i discovered that,my build in track pad and build in keyboard
stop responding permanently. Now i have to use my MacBook using both USB mouse and keyboard.
Is there any way to fix it?? If there is,would someone please help me,PLEASE!!!!
Here is My systems Detail-
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version: (System): 1.31f1

I don't have an answer, but have suddenly developed a similar problem. Early today we got a new Verizon FIOS router to replace an older one. Once the tech fired the thing up and we got everything in the house logged into it, I noticed that my iPhone 4S wifi speed was mighty low. Using the Speed Test app, I was getting a wavering average of between 4 and 7 Mbps. Even on the old router I was usually getting 20-30 Mbps. I checked all the other devices in my house and noted all were getting at least 25-35 Mbps--including my wife's iPhone 4S, my kids iPod 5, and our iPad 2. The wired Windows desktop gets more than 60 Mbps and the wireless laptop gets more than 40. I tried all the tricks on my iPhone--restarting, forgetting the network and the resetting it, and even resetting all of the network settings. Nothing gets me any faster, yet my wife's iPhone 4s blazes away at 25-35+. I even went into the router and played with disabling WMM and switching (briefly) to b/g mode. No luck. Finally, I decided to take out the new router and put back the old one--the verizon tech was nice enough to leave the old one with me--but my speed did not increase one iota. I'm stumped. It worked fine two days ago, and all of our other Apple devices (including an identical iPhone 4S) are fine and run at super speeds. What happened to my phone?

Track pad and touch screen stopped working

My phone was out of charge and it turned out as soon as i plugged it in the charger but i noticed that neither my track pad or touch screen are working. i tired removing and putting back the battery and restarting it but with no use please post the solution asap thankyou.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPod touch 5th gen. Home button stuck and power button not working! Please help!

I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck!

Backup and restore buttons not working

Hi,
Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?

Hi,
According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IPhone home and lock buttons not working at all?

I got my iPhone 4 in October 2010. Since then I have accidentally dropped it on the floor and the back cracked, and in April 2011 I accidentally dropped it in a tub of paint. A bit silly, I know, but I managed to get all of the paint off quite easily and it was fine. However, at the end of last year, the home button started to malfunction and get stuck and just generally not work. In the past few weeks I've noticed I get trouble with it at least once a day and have to sit and press it until it works. Then, today, just out of nowhere, the lock/power button at the top of my phone just stopped working, it's stuck. I don't really have a way to wake my phone now unless I press the home button until it works, and I can't lock it anymore. I don't know whether it would be anything to do with the paint, considering it happened a year ago. Is there anything I can do to get it working again or do I need to take it to Apple?
Thank you very much.

Ok this Might work
1- Try rubbing your home button with alchohol ( or perfume ) in a circular motion for about 20 seconds
2 - do the same to ur power button ( from left to right and repeat ) for about the same duration
3- press and hold both your power and home button at the same time ..
... If this doesnt work try it one more time
If it doesnt respond after the second time i'm afraid u'll have to take it to an apple care center :(
Wish u luck

Built-In track pad - one finger features not working!

I am experiencing a problem with my MacBook Pro built-in Trackpad, after upgrading to Lion, the one finger drag and highlight is not working. Only the tree fingers option is woking for drag and highlight.
I have another Macbook and the one finger drag/ highlight is woking fine after Lion upgrade
The three fingers drag and highlight is non useful, how can i enable the one finger drag/highlight?
Any solutions please?

You can adjust the trackpad here:
System Preferences > Trackpad > Point & Click
Turn off Tap to Click this will require you to actually click the trackpad instead of just touching.
You can also adjust the Tracking Speed using the slider.

8530 Track Pad and E buttone not working, also lines in photos.

Similar Messages

Maybe you are looking for