8560w Wireless Radio won't turn on after sleep mode

Anyone know the fix for the 8560w not turning on it's WiFi radio post sleep mode. It doesn't happen everytime, but most of the time. I will be at my workstation and when I close the lid, go to my meeting and turn it back on the wireless is off and I have to go to the "Windows Mobility Center" to turn it back on.
Any ideas or thoughts would be greatly appreciated.
Thanks!

Hi:
What model wireless adapter is in your notebook?
Maybe a driver update will help.
Paul

Similar Messages

Newest Macbook won't turn on after sleep mode

I have the 17" Macbook Pro I guess the base model (?), bought in september of 2012. I turned it on today perfectly fine for about a half an hour. I closed the screen just like I would any other time normally but just now when I opened it back up it won't turn back on. I tried the power button several times but nothing, the power is fine since it's plugged in with the green light on. I don't understand what is going on... help!

http://support.apple.com/kb/PH11080
http://support.apple.com/kb/PH11096
maybe there is some help here

Turn on! My mac won't turn on after sleeping!

Ever had a problem where your computer won't turn on after sleeping for a few minutes? (I've discovered that too many downloads cause this) Anyway... have you ever tried pushing the power button for one second? Try it! It's been working for me! Hope this helped!
(If it still won't turn on, try typing in letters randomly for one minute. Just type anything like: asdjhas)

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Memory RAM upgrade won't wake up after sleep mode

i just recently purchase a pair 16GB RAM of crucial CT2K8G3S160BM for newegg.com. Yeesterday i try put this on my macbook i7 intel 2.9 processor that crucial said is compatible. but found out everything was good until i close my mac lid for hibernate. What happen is, it won't wake up no matter what i do until a way of reset SMC. BTW i try stick by stick to plug in together with my original 4gb RAM together found out 1 was ok and other one was not. But somehow why the info of hardware show that memory ram 16GB was installed and was OK. Everything was run smooth even booting. The only problem is won't wake up after sleep mode. I already try reset smc, pram, delete startimage, delete powermanagement.file and also sudo hibernate 0-7. Did anyone had this same issue of me. I'm my curiousity will it be the bad ram or software problem.

i just google around and found this two both crucial ram. Both spec are the same but different model no.
CT102464BF160B 16GB and mine is CT2K8G3S160BM are this 2 same? but both same spec.
http://www.bhphotovideo.com/c/product/877010-REG/Crucial_Technology_CT102464BF16 0B_16GB_2_x.html
http://www.bhphotovideo.com/c/product/889298-REG/Crucial_CT2K8G3S160BM_16GB_2x8_ 204P_SODIMM.html

Monitor won't wake up after sleep mode

Does anyone know how to fix the monitor, so it starts up after sleep mode? When my computer comes out of sleep mode the monitor doesn't always come on. Does anyone else have this problem and do you know the cause? The computer is only a few months old and hadn't had any problems.
Thanks,
Shaneil

Well my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
1. heating (the screen generates to many heat but, TO MANY!)
2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
Soooooo....
1. deactivate Sleep mode...
2. Activate a Screen saver...
3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
well i hope it works for some body :P cya...

E320 - wireless won't turn on after sleep

When i open lid after my laptop goes to sleep after i close it, wireless won't turn on (brand new laptop).
I fresh installed win7 x64 (with SP1 and all updates), all drivers and updates from lenovo page (power management, windows update "Enabling Wake on LAN from Standby for ENERGY STAR Version 4.0 for Windows 7", etc.....). I unchecked "allow the computer to turn off this device to save power" on wifi driver...
Bios is very small - didn't found stuff like "wake on lan", "flash over lan", etc.
In PROset/Wireless tool->Diagnose, it says Radio test-radio off....
Need little help
Solved!
Go to Solution.

denied wrote:
So, if anybody have similiar problem - try that
If you could mark the post you consider to have helped lead you to finding the solution as the solution this will help other members experiencing the same or similar hopefully find it quicker when using the forum search function.
[Click on Options, top right of the relevant post, and select Accept as Solution]
edit; for clarity
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Yoga Tablet 2 10 1051 Windows 8.1 Frozen - Won't turn on after sleep

I combined several threads where customers report that after their Yoga Tablet 2 10 1051 tablet goes into sleep mode, it does not come out of it immediately when the power button is tapped.
I am investigating these reports, and will provide updates as this investigation develops.
Thank you,
3/9/15 EDIT: Moved to front of discussion for escalation purposes. Amy_Lenovo
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Solved!
Go to Solution.

After tablet goes to sleep due to no use it wont turn on back when pressin power button. Agterv some time (could be hours) and multiply presses on power button it turns on for some reason. Can't really figure out any preconditions ore sequences. But it happens almost every time it stays in sleeep mode for a long time, which is extremely annoying as tablet can't be use same moment when it is needed.

Screen won't turn on after sleep for newest macbook pro (Feb 26 2011)

Hi!
I just bought the 13' Macbook Pro with an 2.7GHz dual-core i7 processor and 500GB of space, the $1500 model. I am having a problem with the screen and I am wondering if I should be worried about it or if anyone else has noticed it. If it continues, I will have to take it into the store and see if I can get it fixed.
My macbooks screen will not turn on after it falls asleep for a long period of time. The first night I had this computer, it was playing music and I turned the screen brightness all the way down/off and then I fell asleep. The energy settings were set so that the computer would fall asleep after 20 minutes. Pathfinder, F.lux and iTunes were the only application running at the time. When I woke up the next morning, the light on the computer's side indicating it was asleep was slowly fading in and out (as expected). I hit some keys on the keyboard and the keyboards backlighting turned on after a few seconds.
But the screen did not turn on. I tried adjusting the screen brightness on the keyboard and nothing happened. After a few minutes, I held down the power button and heard the computer turn off. I turned the computer back on, AND THE SCREEN LOOKED VERY STRANGE. I could see part of iTunes fragmented/segmented into 5 or 6 sections across the screen. There were also strange lines going across the screen. It looked kind of like a leftover image of iTunes that could be solved with a screen refresh. I turned off my computer again and turned it back on about two more times, and then the screen would simple just not turn on.
As I was packing up to go to the Apple Store, I tried one more time to turn my computer on and the screen was working fine. This was yesterday, and for the rest of the day the computer seemed to work fine. However, I don't think I let my computer fall asleep all day yesterday because I was using it so much.
Basically the same thing happened this morning when I woke up, except to a lesser degree. My computers screen was unresponsive after keyboard input, but I was able to get music to play from my speakers. I restarted it and it seems to be working fine. I didn't see the screen do that weird fragmentation thing this time.
I think something about the sleep function is interfering with my computer's screen. Or perhaps Pathfinder or F.lux have something to do with it. F.lux, by the way, is a application that turns the screen a dark yellowish at night to help your eyes. But I have friends that use this application and I myself have used it for a while and we have never had this problem. Then again, none of them have a 13 inch with an i7.
Does anyone know about this problem and have advice that would save me a trip to the Apple store?
thanks!

Bad news and good news. The bad news is that it happened again this morning. The good news is that I finally found something interesting in the console log, at the exact second my clock is stuck when the machine is failing to wake from sleep:
3/10/11 7:33:53 AM kernel WaitForStamp: Overflowed waiting for stamp 0x32b5d on Blit ring: called from wait for blt buffer (2D blt)
3/10/11 7:33:53 AM kernel timestamp = 0x32b5c
3/10/11 7:33:53 AM kernel ** Debug info for apparent hang in Blit graphics engine **
3/10/11 7:33:53 AM kernel ring head = 0x000013b0, wrap count = 0x 0
3/10/11 7:33:53 AM kernel ring tail = 0x00001f58 ring control = 0x00003401 enabled, auto report disabled, not waiting, semaphore is waiting, length = 0x004 4KB pages
3/10/11 7:33:53 AM kernel timestamps = 0x32b5c
3/10/11 7:33:53 AM kernel Semaphore register values:
3/10/11 7:33:53 AM kernel VRSYNC: (0x12044) = 0x0
3/10/11 7:33:53 AM kernel BRSYNC: (0x22040) = 0x0
3/10/11 7:33:53 AM kernel RVSYNC: (0x 2040) = 0x0
3/10/11 7:33:53 AM kernel BVSYNC: (0x22044) = 0x0
3/10/11 7:33:53 AM kernel RBSYNC: (0x 2044) = 0x0
3/10/11 7:33:53 AM kernel VBSYNC: (0x12040) = 0x0
3/10/11 7:33:53 AM kernel trying to clear semaphore wait on Blit ring
3/10/11 7:33:53 AM kernel After attempt to clear semaphor wait = 0x00003001 no longer waiting
3/10/11 7:33:53 AM kernel kIPEHR: 0x1800001
3/10/11 7:33:53 AM kernel kINSTDONE: 0xffffffff
3/10/11 7:33:53 AM kernel kINSTDONE_1: 0x3fffffff
From when the problem apparently starts (some point in the night while my machine is idle and supposedly asleep) until when I discover it and reboot the machine, I get dozens or hundreds of the above messages. Now somebody just needs to figure out what that means and stop it from happening...

Airport won't turn on after sleep

Recently purchased 2 new imacs(1-24", 1-20"). They are both having the same problem. When I wake them up from a powersave sleep the airport is turned off. This wouldn't be a problem except it wont turn back on. If I click to turn it on it doesn't do anything at all. If I go to assist me -> diagnostics it just says scanning... but never does anything else. The only way I can get back up and running is a restart. This is a problem because I run software that needs to send a backup to the server on shutdown. I have temporarily set the powersave up to 3 hours, but I would much rather fix the problem than work around it.

Hi, When the computer goes into sleep mode, it is like shutting it down, in that it halts any and all processes.
Because nothing is happening until it wakes back up, that is why Entourage won't get it's mail. MSN will disconnect whenever the computer is put to sleep (or more annoyingly, whenever it damned feels like it).
So yes, this is normal behaviour with sleep mode, and the only workaround I know of is to not have the computer sleep. (But the monitor can always turn off, and the hard drives spin down.)

HP Officejet Pro 8500 Wireless (Vista x64) Will not print after Sleep Mode

Hello,
As the title says the printer does not print after coming back from sleep mode. Before entering sleep mode the printer works fine and is responsive. After coming back from sleep mode the printer is still responsive (buttons on the touch screen can be pressed) but unfortunately does not accept any print jobs. Currently, I restart the printer to get it to print. It is connected wirelessly through WRT610N Linksys Router. Any suggestions or solutions would be greatly appreciated.
-Artem Durytskyy

I have been having the same problem all during my warranty period. But no one ever told me it was a firmware problem until two days ago connected to the sleep mode for the wireless one. Supposedly, they have downloads for wire ones now online which I found for 909a and 909b, but not 909g which is wireless. Now I am out of warranty and they won't replace it. I have a long history with tech support since early 2010. Right now, they are sending me a power adapter to try, said to turn off sleep mode (which I dont' know how). Then I told them I found online a firmware download, Apr 2010 to update firmware. My current version is different that the one listed for the download. So, I'm going back to TS to have them fool with it. Has anything worked for you?
Officejet Pro 8500 Wireless, A909g. It's been a problem from the beginning

Screen won't wake up after sleep mode

I bought the new Macbook Air 13" a month ago, and I got a problem with my screen display recently. This is the second time in a week. It went to sleep mode and when i opened the lid, the screen was still black as usual and no matter what i pressed (I tried touching and clicking the track pad as well), nothing happened. So i ended up pressing down the power button to restart it. The only thing I could do was to report this problem as it just turned unresponsive after the sleep mode.
Has anyone encountered the same problem as I did?

I'm having this exact same issue with my wife's 11" MacBook Air (July 2011) we just bought it last weekend and she's frustrated with the issue.
I have none of these issues with my 13" MacBook Pro (March 2011) which frustrates her even more, she wanted the Air because of the portability, but she's not very happy with this issue.
I imagine if it were a bug with Lion it would be present on my MacBook Pro, right? so I can only think is a firmware issue.
Hope Apple releseas a fix very soon!
Message was edited by: juandg

Nokia won't wake up after sleep mode! ( Work aroun...

WCH1.... Posted this in my first thread
Found this somewhere, and it worked for me.
Freezing in sleep mode:
Go to the device manager (you can go to control panel and click on SYSTEM and then device manager will be in the upper left corner). Go to the very bottom and find Universal Serial Bus controllers.
Click on the arrow next to it and it will reveal 2 "USB Root Hub" devices. Double click (or double tap).
On each one, choose Power Management tab from the top. Uncheck "Allow the computer to turn off this device to save power". Then click on OK.
Be sure to do this on both device ISB Root Hub listings. ( The Credit is not mine) but much needed because they keep posting in my first thread !

Well my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
1. heating (the screen generates to many heat but, TO MANY!)
2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
Soooooo....
1. deactivate Sleep mode...
2. Activate a Screen saver...
3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
well i hope it works for some body :P cya...

Golf Radio won't turn off after reinstalling CK-10...

For some time I've been using my CK-100 but without a switched 12v supply which means that the unit remained on after turning off the ignition but otherwise with no problems. I've recently bought a new loom and fed the switched 12v from the cig lighter so the CK-100 switches off/on and with the radio being fed from the big multipin plug rather than the speaker outlet with no problems but the radio often doesn't switch off when I remove the key. During normal operation there is no indication that there might be a loose connection and I have checked them all. The only thing I can think of is that I also updated the software to v4.5 so I'm wondering if that is causing any problems, does it think that there is a call outstanding although it doesn't mute the radio.
Any help appreciated
Phil

Sorry about the delay, Alan.
It's a possibility, although I'm used to seeing it more with older Symantec security suites rather than just the Antivirus. (For example, NIS 2005.)
The mechanism is two-part. The first part is that if there's an issue with iTunes rules in the firewall, sometimes the iTunes.exe process doesn't shut down after you "close" iTunes. Sometimes it can't even be ended in Task manager.
The second part is that security suites often try to have a component being the last item running in memory before the PC shuts down (because some malware attacks during the shut down procedure. Because the iTunes.exe can't be stopped, it tries to "outlast" that process ... and you get spectacularly slow shutdowns on the PC.
... So we'd better check to see if something like that is afoot ...
Restart the PC (power off?) And launch iTunes. Quit iTunes. Bring up your Task manager. Go to the processes tab. Click the "Image name" header to sort the processes alphabetically.
Is iTunes.exe still running even though iTunes has supposedly been shut down?

Wireless keyboard won't turn on after changing battery

This is what happened:
I got a message yesterday telling me that the battery for my wireless keyboard was low and I should replace them. This morning, before I switched on my Mac, I put in new battery for the wireless keyboard. Then I switched on my Mac. And I got a message on the screen saying that There's no keyboard connected and couldn't find any keyboards. I thought that maybe I need to turn on the keyboard to make it work. So I pressed the power button and noticed that the green light doesn't even come up..
What's going on? Is my wireless keyboard already dead??
Any advice would be appreciate it. Thanks.

Possible fix to non pairing blue tooth devices.....
I have a BTMMouse- quite new. The original lithium batteries died and I replaced them with alkaline. It would connect but refused to pair. Went on the MM discussion board which had over 300 similar problems with both MM and BT keyboards, with absolutely no solutions from Apple or anyone!
I have an Apple Care plan, so I called and was told to shut down. Then remove the power cord from the back of my iMac, wait one minute, plug it back in. Fire up, and then attempt to set up a new device in BT. It worked on the first try. Then to double check, I shut down and restarted and the mouse stayed connect and paired!

Rmbp 13" 2014 won't turn on after sleep battery drain

Hi peeps,
Today, my rmbp 13" from 2014 failed to start after it's battery ran dry while it was sleeping.
I have let it charge for a while (about 15 minutes) and then it wanted to turn on again.
My question is: is this normal behavior? I found another thread with kind of the same question but it was irrelative due to other issues being present in that particular thread.
Best regards,
IT07.

Possibly, but somethings may be left under the user's control.
About Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count

8560w Wireless Radio won't turn on after sleep mode

Similar Messages

Maybe you are looking for