8610 Scan to Computer Errors with Mac Yosemite

I am beyond frustrated with this product and the constant errors.
I am having an issue scanning from my HP 8610 to my Mac (Yosemite). I have installed the printer via HP software and after the first install I opened the HP Utility to enable scan to computer and there was a red dot and the option was unable to turn on.
I went to the 8610 page and downloaded the drivers. After doing so, the option to enable scan to computer was turned on and I began scanning to my computer.
Once I left the office that night and returned the next morning I tried to scan a documnet I received an error message on the front of the 8610 saying that there was a connection issue. I opened the HP Utility and again my option to enable scan to computer was unable to be turned on and the red dot reapeared. I reinstalled the driver, problem fixed.
I have had to do this every single day I return to my office. I have tried everything. I deleted the printer, I reset the printing system, I have restarted the printer, I have restored the printer, I have set the printer up not to use Airprint. NOTHING WORKS.

Hello there! Welcome to the forums @bolinej
I saw your message about the issue you're having with scan to computer as well. Please try out these steps in order:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the full feature driver here: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
In addition, download this driver: HP Printer Drivers v3.0 for OS X
You can also try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Try scanning again and it should work now!
Good luck, Happy Holidays
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

IS CS 5 COMPATIBLE WITH MAC YOSEMITE?

IS CS 5 COMPATIBLE WITH MAC YOSEMITE?

As of now the Yosemite installer does cause problems with CS5. Proceed with caution.
Photoshop CS5: “An unexpected and unrecoverable problem has occurred. Photoshop will now exit“ after updating to Yosemit…

Can I transfer my CS5 files from my Windows 7 computer to my Mac Yosemite computer and have them work with CS6 for Mac?

I am using Dreamweaver CS5 on a Windows 7 laptop. I would like to change to Dreamweaver CS6 on my Mac running Yosemite. Can I transfer my CS5 files from the Windows computer to the Mac and will CS6 be able to work those files on the Mac? I do not need nor want a subscription account. Just the stand-alone program for occasional tweeks to my web site. at www.longwayhome.com.
It is a realtively simple web site that requires only simple editing from time to time.
Ed Dover

Yes, your files in CS5 are just .html, .css, .php and .js files, there's nothing that makes them "CS5 versions" of those file types.
You can do it a couple different ways, but the easiest would be to copy the folder being used as the root directory (and all of it's contents) from one machine to the other, then on the new machine, simply set up a new site definition, using that newly copied folder as the local root.
If you want, you can export your site settings (FTP and whatnot) on the old machine...
Go to Site > Manage Site> click the site you want > Export
Copy the resulting .ste file along with the local root folder to the new machine
On the new machine go to Site > Manage Sites > import to bring in the .ste
Relink that new site to the newly copied root folder

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Officejet pro 8610 scan to computer OSX 10.10

Dear all,
I've just bought a HP Officejet pro 8610 and it prints like a charm. I can't however scan to my computer. According to the manual I have to activate the scan to computer function in the utility program but I have no such option. Am I missing something? It works fine on my dads windows 8.1 laptop.
With kind regards,
Anthony

Hi charlene025,
Thank you again for responding!
It sounds like there is a driver conflict on your computer, especially since it is showing an older printer. I am going to recommend the following:
Uninstall the printer software. Uninstalling the Printer Software.
Reset the printing system. OS X Yosemite: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Reboot the computer.
Reinstall the software from this website. HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers.
Once these steps are completed try and re-enable the scan to computer function again.
Hope this works!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

LaserJet pro 200 color MFP M276nw - Scan setup and installation on Mac Yosemite

Hi all,
I just bought a new LaserJet pro 200 color MFP M276nw and I'm trying (since 4 days) to coorectly install it.
My target would be to use it through the wifi connection and I correctly set it by the front panel.
When I try to install the printer by wifi, I can install the print driver but I can't find the scan driver.
I tried connecting it by ethernet and the system point out a multifunction scanner and printer driver. If use them, it works correctly.
Whenever I pull out the lan cable to use it by wifi it lose the scan functions.
What am I doing wrong?
Thanks
Gianluigi
This question was solved.
View Solution.

Hi @gianluigi1982 ,
I see that you are experiencing issues scanning over the wireless network, but you can scan by a Ethernet connection.
I would like to help.
What drivers did you install for the printer? (Apple Update or the 10.9 download drivers)
I checked our Lab computer with 10.10 installed on it and I was able to scan through Printers and Scanners over the Wireless network.
Check the driver version installed.
Go to the Apple, System Preferences, Printers and Scanners, highlight the Laserjet, click on the Print tab on the right side of the window and select Options and Supplies.
On the General tab it will list the driver version.
19.9 is the one listed on the lab.
What driver do you have showing?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet Pro 200 MFP M276)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
On the Printers and Scanners window, highlight the printer on the left side, on the right side of the window you should have a Print/Scan tab, click on Scan, then Open Scanners and test the scanning. If you don't have the Scan tab, let me know.
Did you add the printer as a Bonjour printer or through the IP Protocal? (can't scan through IP Protocal)
Are you using the automatic IP address, or your own Static IP address?
Here is some information for Scanning in OS X v10.10 Yosemite Without HP Software.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

No signal error with mac mini to acer monitor

I bought an Acer monitor and a Mac mini back 11/11 and it has worked fine. I recently moved the computer to a new room and when I set everything up I got a no signal error with the monitor and went to sleep mode. I have tried another monitor (viewsonic) and a new VGA cable and a new VGA to dvi converter to no avail.......any suggestiins....frustrating thing is both monitor and computer are working.

Try resetting the SMC andNVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next call Apple since yo have 90 days of free telephone support
Complimentary Support (USA)

OfficeJet 4630 enable scan to computer error

I just purchased the Officejet 4630 yesterday. I am able to print but unable to scan to computer. When trying to enable scan to computer, it never completes the task. I have followed the troubleshooting guide including repair disk permissions. The driver is the most recent.

Hello Fredcat,
Welcome to the HP Forums!
I understand you're unable to scan a document using the Officejet 4630. I will do my best to assist you! First, what is your operating system on your Mac computer? Click here to find out: Mac.
Have you followed this HP document on A 'Computer Not Found' or 'Connection Error' Message Displays during Scanning. Did you try uninstalling/reinstalling the HP software?
How is this printer connected? Wireless or USB?
Please verify this information and I will assist you further. Have a great day!
I worked on behalf of HP.

Is the Flash Live Media Encoder 3.2 compatible with MAC Yosemite?

I am trying to download the Flash Live Media Encoder 3.2. I can download the file but when I try to open it, I get an error message that says "Image not recognized."
Is this media encoder compatible with Mac OS X Yosemite (10.10.2)? If not, are there any work arounds?
Thanks for your help!

Hi Aaron,
Thread on Apple Support Communities: https://discussions.apple.com/thread/3758993
As per the above thread, it would generally happen if the file is corrupt or in case of an unsuccessful download. I would appreciate if you could attempt another download and see if it helps. Meanwhile, I shall try researching at my end for a conclusive answer.
Regards,
Diana

Acrobat XI Actions not working with Mac Yosemite?

We are witnessing an apparent bug with Acrobat XI and Yosemite when creating or importing Actions; specifically they do not appear in the Actions panel!
All latest updates (as of Nov. 6, 2014) have been installed; can anyone else kindly confirm this bug please?
Respectfully,
Bill Carberry
[self-promo signature info removed by moderator]

I try to reproduce your action issue in Mac Yosemite, but I can’t reproduce your issue in our end.
I try the problem in Acrobat 11.0.10 in Mac Yosemite version i 14A_389.
I need the following information:
1. Can you send me your action sequence file? How do you create this sequence file, does it work before?
2. What is your Mac Yosemite version, my Mac Yosemite version is 14A_389, you can find this from “About This Mac” menu.
3. What is your Acrobat version, 11.x or 10.x, you can find this from “Acrobat/About Acrobat” menu
Thanks for finding the bug for us.
Steven;(Acrobat QE)

Error With Mac OS X

Below is an error that I am getting with a menu application. This application loads a menu from an internal website that is on our intranet. I am not really familiar with either MAC OS X or what this error is actually telling me. I would appreciate any feedback on this issue.
This is loading through IE on the MAC itself. Other workstations in the environment are windows based and so far do not have a problem. This is something that is new to me.
JavaGimp
Java(TM) Plug-in: Version 1.3.1
Using JRE version 1.3.1 Java HotSpot(TM) Client VM
User home directory = /*******/********
no proxy
load: class ime.class not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:216)
     at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:37)
     at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:133)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:130)
     at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:269)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:107)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:468)
     at sun.applet.AppletPanel.createApplet(AppletPanel.java:581)
     at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1334)
     at sun.applet.AppletPanel.runLoader(AppletPanel.java:510)
     at sun.applet.AppletPanel.run(AppletPanel.java:288)
     at java.lang.Thread.run(Thread.java:491)
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:216)
     at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:37)
     at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:133)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:130)
     at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:269)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:107)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:468)
     at sun.applet.AppletPanel.createApplet(AppletPanel.java:581)
     at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1334)
     at sun.applet.AppletPanel.runLoader(AppletPanel.java:510)
     at sun.applet.AppletPanel.run(AppletPanel.java:288)
     at java.lang.Thread.run(Thread.java:491)

I'm guessing that the html tags that you are using are incorrect. In my experience IE on Mac OS X uses a different object tag than what is typically used for IE on windows. This would explain why you are seeing the error on Mac OS X and not windows.

More Torch sync errors with Mac iCal

I have read the thread at the bottom of my post below and am having the following sync problems with iCal
1 Duplication of iCal entries in the Torch calendar
2 iCal entries with the all-day box checked appear as all-day items in the Torch calendar, but not with the all-day box ticked there
3 iCal entries in the 8 different calendars there are all transferred to a single Torch calenda (which is what I want and expect), except for iCal entries from 1 April 2014 to the present day in one calendar only. How can I get these to transfer too?
4 I have successfully merged various Torch calendars and now have almost all the calendar entries in a single Torch calendar, the gmail calendar which is set as the calendar to which all new entries go, but is not set to sync wirelessly. However there seems to be another calendar on the Torch just called the default calendar with about 400 entries in it. I do not know how to merge the gmail calendar and the default calendar or even whether I need to or not as I do not know how to work out what the 400 entries are, as opposed to the 3000 or so entries in the gmail calendar.
I have tried the various options using Blackberry Destop Software 2.4 including "Syncing All events" and "Replace all calendar events on this Blackberry device".
Two further questions on those options:
Should "Sync all events" leave the events in iCal and the Torch Calendar absolutely identical?
Does or should "Replace all events on this Blackberry device" delete all existing events on the Blackberry and then faithfully copy all events from iCal to the Blackberry?
Experience suggests the answer is no to both questions, but I suspect the answer should be yes.
I would be most grateful for any and all help on this.
I have Mac OS 10.8.5 and a Torch 9800 with OS Version 6 with Bundle 3170
http://supportforums.blackberry.com/t5/BlackBerry-Torch/Torch-Calendar-Sync-with-Mac-Ical-error/m-p/...

Thank you coreno for opening the thread up. Now I hope to get some help.

HP 1220C PS PRINTER WITH MAC YOSEMITE 10.10

MY HP1220C PS WILL ONLY PRINT BLACK WITH MAC SYSTEM (ABOVE) -- IS THERE ANY SOFTWARE AVAILABLE
THAT I COULD USE TO MAKE IT PRINT IN COLOR ?? TKS -- WINJE

I had, and still suffer the exact same problem.
I've got a late 2009 iMac that came pre loaded with Snow Leopard. which supports the printer. The only way to ensure you get colour printing on a 1220C in Yosamite is to wipe the iMac, install Snow Leopard as the base OS, install the printer then go through the life draining steps of upgrading to Yosamite via Lion, Mountain Lion & Mavericks. A dogs breafast I grant you!
I've tried to locate the printer driver on my time machine, or like you a new or alternate one so I can bypass the whole gradual install process and dump the driver where it needs to live but have yet to find it.
If someone else has a better work around please let me know as I'm almost to the point of throwing out a perfectly good printer if I ever have to rebuild my iMac again.

Error message says my EOS Rebel T5 isn't compatible with Mac Yosemite--help!

I'm having trouble downloading photos from the camera to Image Browser OX. Says it's not compatible with Yosemite, yet the web site says it should have the correct drivers installed. What do I do?

Apple's photo apps will import images from the camera with no problem (RAW or JPEG - they support both).
If you want to use Canon's software, you'll need to make sure you're running the versions compatible with that OS.
The software is located here: http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_rebel_t5_18_55_is_ii_kit#Dri...
You may be able to update the base install to the latest version. Canon's updaters require that a previous version of the software is installed. If not, you can download the full install (that's the item called the "EOS Digital Solution Disk Software")
Good luck!
Tim Campbell
5D II, 5D III, 60Da

HP Envy 5660 scanner issue with Mac Yosemite 10.10.4

I have an HP Envy 5660 all in one. It is connected wirelessly to my Mac with Yosemite - OS X 10.10.4 Operating System -- the printer component works well. The scanner component does not show up at all. I have loaded the scanner software and completed all updates. The scanner shows up in my Applications list, when I click it it goes to HP Scan page - I click the scan "button" and i get a "no scanner selected". I click "Browse Scanners" and get "Choose an HP Scanner" - no devices are listed. In the "search window" on this small screen it says "All". I don't know what I am mising or not doing to get the scanner to work.

Hey , I see that you're unable to scan to a Yosemite machine with your HP ENVY 5660 e-All-in-One Printer. I would like to assist. I recommend you try the following steps: Uninstall your printer - click here for instructions. Repair disk permissions on your Mac - click here for instructions. Once you've finished running the above-noted utility, restart your computer. Lastly, click here to reinstall your printer. When that sequence is complete try the scan setup as recommend in this HP article. You can follow the 'Scan with HP Software' and 'Scan Without HP Software' options. Alternatively you could try installing the HP Easy Scan app for your Mac. Click here to install (it's free). Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

8610 Scan to Computer Errors with Mac Yosemite

Similar Messages

Maybe you are looking for