8620 prints, but hten gives error message on Surface Pro 3

This error message has been bothering me for some time. From day one when I print from my Surface Pro 3, I get an error message that my document (doesn't matter what it is) did not print. About 95% of the time, it actually DID print but I get the error message. So whenever I print, I don't actually know if the error message is bogus or not.  I've tried uninstalling and reinstalling all of the drivers and apps on my surface, but to no avail. Can anyone help me keep my sanity? Here is an example of the error message from just a little bit ago. Notice the error message in the upper right hand corner. And this "test print" did actually print. 

Hi!, Egan1: Welcome, to Forum !. Please, download and run, the HP Print and Scan Doctor from ... www.hp.com/go/tools

Similar Messages

  • 8620 prints, but then gives error message on Surface Pro 3

    This error message has been bothering me for some time. From day one when I print from my Surface Pro 3, I get an error message that my document (doesn't matter what it is) did not print. About 95% of the time, it actually DID print but I get the error message. So whenever I print, I don't actually know if the error message is bogus or not.  I've tried uninstalling and reinstalling all of the drivers and apps on my surface, but to no avail. Can anyone help me keep my sanity? Here is an example of the error message from just a little bit ago. Notice the error message in the upper right hand corner. And this "test print" did actually print. 

    Hi!, Egan1: Welcome, to Forum !. Please, download and run, the HP Print and Scan Doctor from ... www.hp.com/go/tools

  • HT1212 iPhone diabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). Now what to try to reset iPhone?

    iphone disabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). How to restore iPhone?

    Try here   =   http://support.apple.com/kb/TS3221

  • When I plug in my iPod Classic, it is visible in My Computer, but iTunes gives error message PLEASE HELP!

    When I plug in my iPod Classic, it is visible in My Computer, but iTunes gives an error message saying "The software required for this iPod is not installed corectly. Please reinstall iTunes to install the required software." It started completely randomly and now does it every time. I completely wiped out iTunes and reinstalled it via the intructions from this website, but it is still doing the same thing. Furthermore, when I go to Start, All Programs, the iTunes folder contains no data AND the desktop shortcup does nothing when clicked on. I have to go to Start, Run, and type in itunes.exe in order to run the program. Can anyone tell me what is going on?

    Do one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice (won't erase everything)
    > Go to My Computer (windows xp) or Computer (windows vista & 7) and see if iDevice shows
    > Restore the iDevice completely (will erase everything)
    > Make sure the iTunes and/or iOS firmware is up-to-date.
    The ones I cross over is the ones you don't have to do. This should help

  • Connecting a printer, but getting an error message

    Hi, I'm trying to connect my new printer "Epson sx515w" to my MacBook, using ox 10.4.11.
    I get the error message "client-error-request-value-too-long" when I try to add the printer to my printer list. PLease help!

    There has to be another reason. This system was imaged with a fresh install of Office 2010.
    I had similar issues with Presenter 7, and if I am not mistaken, you had to provide me with a *.reg file to allow this to install properly.

  • Error Message on Surface Pro 3 Device

    Symptom:
    When going to Control Panel --> Mail --> Data Files --> Add --> and add any PST file found on shared network folder, I get the following error message: "Windows Shell Common DLL has stopped working. - A problem caused the program to stop
    working correctly. Windows will close the program and notify you if a solution is available."
    The only option I get is Close program.
    Going into Event Viewer --> Windows Logs --> Application, I see the following error logged in (pulled from Details - Friendly View):
    Source: Application - Event ID: 1000 - Task Category (100)
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2015-03-18T23:10:58.000000000Z
    EventRecordID
    21829
    Channel
    Application
    Computer
    CSWIN81-YoshiSP.calsoft.com
    Security
    EventData
    rundll32.exe_shell32.dll
    6.3.9600.17415
    54504eb8
    KERNELBASE.dll
    6.3.9600.17415
    54505737
    80000003
    00000000000de002
    1208
    01d061d0a31406d8
    C:\WINDOWS\system32\rundll32.exe
    C:\WINDOWS\system32\KERNELBASE.dll
    08e19114-cdc4-11e4-8281-281878badb6d
    Unfortunately, my IT skills are not good enough to troubleshoot this error message.
    Troubleshoot Techniques Taken So Far:
    I tried to Google similar issues, and couldn't find any resolutions online.  
    I've ran Command Prompt as Administrator and ran the sfc /scannow command. The results: Windows Resource Protection did not find any integrity violation.
    I've also edited my registry by going to HKEY_CURRENT_USER\Software|Microsoft\Office\15.0\Outlook\Profiles\ and deleting all profiles.
    I've also ran Windows Updates via Control Panel and downloaded and installed all (including optional) updates.
    My Computer:
    Surface Pro 3
    Operating System: Windows 8.1 Enterprise
    Attach to Domain: Yes
    Running Microsoft Office Professional Plus 2013 64-bit
    Side notes:
    The user who owns this device is currently using their older laptop that they were previously using before getting this Surface Pro 3 as a replacement. The laptop has no issues connecting to the pst data files stored on a shared network drive. It appears
    that this issue is specific to this device possibly.
    Can someone out there please help me out?

    Hi,
    Basically Network Stored PST files are not recommended by Microsoft.
    .pst files are not intended as an enterprise network solution. Although it is possible to specify a network directory or a Universal Naming Convention (UNC) path as a storage location for a .pst file, network usage is not meant to be a long-term, continuous-use
    method of storing messages in an enterprise environment.
    We can learn more from these articles:
    Network Stored PST files ... don't do it!
    Limits to using personal folders (.pst) files over LAN and WAN links
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • C5550 printer gives error message "Turn off power, then on again" with all flashing lights

    This printer all of the sudden in constanty jamming up and gives error message "Turn off power, then on again", makes a lot of noise, and does it again.  Can't get any printing done!  I'm about to throw it out the window.  Any suggestions?

    Hey,
    I have been looking around trying to find the error that is associated with the blue blinking light above the memory card slots on the lower, right-hand side of the front of the printer. I have found that it is called the photo light; but, in regards to the flashing of it, I can't seem to find what that means.
    I recommend removing all memory cards from the slots, unplugging the power and leaving the printer unplugged for a while. Hopefully when you plug it all back in, everything will be ok. If not, let me know. In the meantime I'll keep looking and when I hear back from you I'll hopefully have some more information for you.
    Thanks for your detailed reply, have a great day, Look forward to hearing back from you.  
    I worked for HP.

  • In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

    In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
    I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

    I have same error except that i get it even when my phone is not connected.

  • Email button error works but gives Error message "10"

    I have "attach to email" buttons on my forms. I leave the email address blank for the person to fill in themselves. It works fine but on one form (and one form only) when clicking on the button an error message window comes up - with exclamation mark and the number "10", that's it. The button works (attached the file to an email) but still gives the message. My other forms don't give this message though the buttons appear identical.
    What could be causing this?
    (Livecycle 8.0)
    Thanks in advance, Marg

    Remove the "mailto:" from the Submit tab if you have the script code written in the event.
    But usually if you have "mailto:" in the submit tab and while you are preview mode, it will open two email windows. A new email with the subject as "Form Returned"..(This new email error will work only if Acrobat Pro is used by the Designer while previewing the form. If the Designer uses Acrobat Reader while previewing it does not even show any error and simply quits. You can check which one is used while previewing by going to your Windows -> Task Manager and see which EXE is running. For Acrobat Acrobat.EXE and for Reader it will be AcroRd32.EXE).
    Try removing the mailto: from the Submit tab and if you still have issues, may be you can send the file to [email protected] , I can have a look at it..
    Thanks
    Srini

  • Trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out dis

    trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out disc

    copy the disc contents to a desktop folder and click setup in that desktop folder.
    if that fails what ps version are you trying to install and what is your os version?

  • The Print Carriage Cannot Move error message

    I  tried to align printer because my printing output as been off center. However, when I try to run the align printer function, the printer stops after a few seconds and a few strange noises, and displays the error: The Printer Carriage Cannot Move. There is normally a sheet of paper jammed in the back carriage, but after I clear it, and try again, the same thing happens. Strangely, I don't have the paper jam issue when I copy or print (i just have an alignment problem). Why do I continue to have paper jam issues when I try to run the align printer function, but not any other functions?For instance, when I ran the clean printer function, the paper and the test came through very smoothly.  What gives? please help. thanks!

    Hi , Welcome to the HP Forums! I see that you are getting the "Print Carriage Cannot Move error message," with your HP Officejet Pro 8600. I am happy to help!  It is possible you may have a permanent hardware malfunction with the printer. In order to determine this, please try the steps within the following guides: A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 Printers.'Carriage Jam' Message Displays. Hope these guides will resolve your issue!  “Please click the Thumbs up icon below to thank me for responding.”

  • ITunes new version doesn't open at all. Gives error message

    I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
    I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
    I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
    How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
    Thank you.

    Thanks to Jim Zack, the problem is solved.
    If you're having this problem, go find the solution at the following page and read Jim's suggestion.
    http://discussions.apple.com/thread.jspa?threadID=1155613

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • HP PSC1610 won't print from internet. Error message says connect computer.

    When trying to print from the internet my printer start to accept the paper, but then spits it out with nothing on it.   I looked at the help menu and an ERROR message said  "no connection; connect computer or install device software.  This has never happened in the past until I installed new ink cartridges.   I unplugged and disconnected the printer then reconnected, etc.  Same problem.  Then I uninstalled and reinstalled the printer.  Installation successful, showed connection to computer, but failed to print document.  The error message is the same.    Help!   Thanks Xara
    I

    Actually this is an addendum to the above.  the computer used to send the command to the printer uses Windows XP.  When the command is sent the printer goes into warm up mode for 2-3 seconds and I hear the parts moving before it spits the blank paper out and aborts. The printer queue is empty on my XP as if the job was finished.  Thanks  Xara

Maybe you are looking for