865 beta bios with raid 1

Question

you will have to wait for joshin who i gave 875 bios to to put it on his server
but there should be a link here soon thanks to him
afraid i know nothing else re whats fixed in it
just resoponding to those who moaned in the beta 875 thread

Answer 1

I do like to thanks the programming team  of this Bios .
I have noticed  from the first minute , after installing it  , all the necessary voltage corrections , that this Bios includes  , and I totally agree with them .
At my board with 533 Bus based CPU chip , and by working as suggested at the turbo mode , the  AGP bus it is locked . ( In the 3Dmark 2003  ,got lower by a little  marks) .
I would suggest , one also voltage correction on the CPU core voltage , like setting it at 1.58 or 1.60 by default , any way  this is not a critical issue , as the CPU it is forgiving in the voltage hovering , but the rest sub system is not .
As  bug report , I have to say that the clock generator , in the Slow setting , clocks the CPU even higher than the 1.3 and 1.4 Ver bios ,   from 135.5  the new forced bus is like 138 Mhz .
But if the setting Turbo is set  , as the team suggests , everything is normal , like 135.5 Mhz .
With locked AGP , and the rest fixes .
In my system after of many hours testing , I found that this Bios works fantastic , and  there is Zero instability issues  . :D
I do not know if this is the right place to report this , but I have one small issue , with the on board NIC , my report  haves nothing to do with this Bios release .
So , here is the story  ,    in my setup  I have connected the NIC  with one Compex switching Hub  ,  when I power down my system  , the NIC it does not power down completely ,  and the result is that  the  Led  Port indicator  on the Hub,  indicates that the computer is On , or that the connection is active .
To be honest , the  NIC it does power down , but one second later , after the total system  shut down  procedure,  the NIC power up it self  , indicating 100Mbits connection  ..
The on board NIC Led indicator  becomes active,  and accordingly my Switching Hub , indicates  a live connection at 100 Mbits .
Is this normal ?? I guess, is not .  ?(
 Is there any tip that I should know , if there is not one , I would like to add this in my wish list , of what it would  be nice to be included in the next official or Beta Bios update .
I would like to say one Big Thanks to the MSI programming Team , I know that they  hiding  around this forum , thanks again people .
I wish you all the best , and ask some extra money for MSI for your overtimes too , you worth it .  8)