865P Neo - LED meaning?

I just put in the new 865P Neo board with a P4 2.4 HT & Kingston 512 DDR400 stick.  When I try to boot it (btw never get anything showing on the monitor) - I get to only the #3 green showing (all others red) and beeps twice in succession then once a second or two later.  What's the meaning of this?  The manual says "Allocating resources to ISA" - no idea what that means.
Note:  I've taken all the cards (both PCI and AGP) out, unhooked the drives - still same #3 laughing at me.
Other note - when I take out the memory stick - it stops at #2 green only.  Doesn't make much sense because that means initializing the floppy!
Note2: I also get like 9 beeps on the #4 green only - but it continues on...

You only have One stick of ram? I had the same problem and came to find out that it was a memory compatibility issue. So try using a different stick of memory and see how that works. If it doesnt work, Then check your jumper settings. Try using O/B sound and video to see if you can get to the bios and work it out from there.

Similar Messages

  • 865p neo boot up screen Question

    i'm using 865P neo with MSI MX440SE-T(8788) 64mb graphic card. i realized that my PC boot up without the graphic card information page. if i'm not wrong, noramlly when PC boot up the first screen we see will be the black screen with all the graphic crad information after that then is the bios page. i don't see all these graphic card information since day 1. is my PC set-up having a problem or the 865p neo don't support that function? thank.

    Quote
    Originally posted by buddie
    MSI\'s 865P has a new feature called boot logo. By default it\'s MSI logo and the 8X series logo. I *think*  you can personalize this logo to suit your need.
    This logo however, hides the boot up process. If you need to see what\'s going on, Just disable it in the bios.
    ya, i had disabled that. i think what i mean should be the "video bios info on POST". i did posted my question in other forums and so of the guys told me it is normal for some PC that don't show the video bios post and its is nothing to worry about actually...

  • Blocked dram frequency - 865P neo

    Hi
    I have one problem my dram fraquency is blocked in bios. it is set up at 400Mhz and i can't change it :(
    I have msi 865P Neo and 2x256 DDR 400 (PC 3200) (dual)
    Do you know what i should to to change it ??

    Quote from: garthol on 22-July-07, 00:13:41
    "400" is what's greyed out
    Configure Dram Timing by SPD:
    both options doesn't change this situation.
    when is disable is block and when enable is the same.
    Come on garthol,
    Please help yourself by reading through your own products specs, if you think that I'm not of any help. If you are saying that you want to set to 400MHz manually earlier, then we'll know what you want.
    The thing is, this board is running on the old ICH5 chipset and does not have native DDR400MHz support. All you can do to acheive DDR 400MHz speed is by overclocking, nothing else.
    Please read product page: http://global.msi.com.tw/index.php?func=proddesc&prod_no=542&maincat_no=1&cat2_no=&cat3_no=
    If this is not clear enough, you can try this > How to contact MSI.

  • 865p neo serie problem

    Hi !
    I change my motherboard for MSI 865P Neo with Intel 2.4 Mhz 800 Mhz Hyper threading function and 256 MB DDR Ramm 333 Mhz.
    My problem is every time i try to install windows XP I get problem with some file that say is corrupt butni change the Xp cds and Cd-rom and still can install it. I change the hard drive and use the same hard drive to other computer and work well Just on the board i got that problem.
    Some one tell me that motherboard dont work well is dont have Kisnton memmory.
    Plz help is any one now about this problem

    Try raising your memory voltage to 2.7 then install Windows again.

  • Problem with MSI 865P Neo and G4 Winfast

    Hi all,
    I bought the mainboard MSI 865P Neo. Have put it into G4 Winfast A280 LE TDH my vivo. And the problem appeared.
    When I doing whatever in Win (for example open explorer, mouse rightclick ...) the screen is simply runing over.
    Seems like a video card doesn`t handle it or Screen (monitor) is poor but it`s not. The same problem appears also while Windows is installed.
    Little note I want to add is my G4 has new Bios setup and on my second card Leadtek G2 MX everything`s ok. It seems for conflict between the mainboard and my v-card. Have you met similar problem ?
    Would be grateful for an answer  
    Best regards

    On my old mainboard - ABIT ST6R (with G4) everything was ok. I changed mainboard, RAM and P4 and problem has appeared.
    MSI supports AGP 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V (3.3V not supported)
    If G4 needs 3.3V (I can't find G4 how much needs) that problem is obvious. I must change mainboard.
    Anyone knows how much G4 poverage needs?
    P4 2.4
    MSI 865P Neo
    G4 Winfast A280 LE TDH my vivo
    512 RAM Kingstone 333Mhz
    Barracuda IV 80Gb
    Barracuda III 40Gb
    LG DVD
    LD CDWR
    SB Live
    POWER 300W

  • 865p neo windows install problem

    Hi All!!
    I have  board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
    I Hear that 865p series baord alnly work well on Kigston memories Ram.

    Quote
    Originally posted by bjs_solo
    Hi All!!
    I have  board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
    I Hear that 865p series baord alnly work well on Kigston memories Ram.
    Double post!
    http://www.msi.com.tw/program/service/forum/index.php?threadid=28852&boardid=10&styleid=1

  • TWO DEAD 865P Neo's

    Ok...this is seriously bugging me.    :O   I bought a 865P neo board 2 weeks ago, and about a week after using it, the mobo went dead.  I went and exchanged the board for another 865, installed it, and everything on the comp worked fine.  Then a few days later....same thing.  The mobo went dead.  It doesn't power up at all.  When I hit the power button, the fan for the CPU twitches, but nothing powers up.  I know the PowerSupply is fine because I tried it on another computer and it worked great.  If anybody out there is having the same problem or knows what's goin on I would really appreciate your help....My specs are listed below.  I haven't done any BIOS updates either.  
    SPEC
    MOBO: MSI 865p neo
    CPU: Intel P4 2.66Ghz 533Mhz FSB
    RAM: Kingston 512MB DDR400
    PSU: Allied 350W PS
    HD: Western Digital 120GB w/ 8mb Buffer
    Video: Gainward GeForce4 Ti4200 128Mb DDR
    CDROM, DVD, FLOPPY

    I tried clearing the CMOS but that didn't work.  I also checked out the lights on the D-Bracket and i'm getting a Green Red Red Red, for lights 1,2,3,4.  I looked online and that sequence is supposed to be the early chipset initialization.  This thing is really bugging me....if you guys know what's goin on...I would really apprecite the help.

  • Help!!! Intel 865P Neo Board

    Dear All,
    Currently, I've changed my MSI board from Intel 845GE Max-L to 865P Neo Board and seems like I was unable to play games (eg: NFS HP2, C&C General). When I start up the game, after the movies introduction, supposed it will reach the main menu, but it hang there, no display, my monitor power cut off, no sound either. I can't see anything at all.
    Everything was running fine, except running games. Should be Intel 865P better than Intel 845GE. Hope you guys can help me solved this problem for me. The BIOS setting is set to default, no overclocking.
    I've change my system from:
    P4 2.0GHZ
    MSI Intel 845GE Max-L
    512MB PC2100 (DDR266)
    to:
    P4 2.53GHz
    MSI Intel 865P Neo Board
    2X 256MB PC3200 (DDR400) = 512MB
    Using the same graphic card:
    Hercules 3D Prophet Radeon 8500LE Series (4X AGP Card)
    Pls help!!! Thanxs!!!!
     ?(  ?(  ?(

    Quote
    Originally posted by funks
    Quote
    Originally posted by ernmahkh
    Quote
    Originally posted by funks
    Try forcing your RAM to 266 in the BIOS and see if it works any better..
    Any ideas how to do it?? I can\\\'t find any setting for RAM to be set to 266 in the BIOS...
    Hmmm, it\'s in one of the menu options (where you can set processor voltage and such)..
    There\'s 4 possible settings for it when I looked (266, 333, AUTO, 400)..
    Take it off AUTO and set it to 266..
    I tried wat you have told me...set to 266MHz
    still the same... Monitor power will just cut off. Cannot see anything. Do u guys think is the power supply prob?
    I'm using a 300Watt PW. but I was wondering if PW not enough, it will not be able to bootup.

  • 865P Neo board outdated

    Hello,
    just wondering how come this msi 865p neo board had only 2 bios revision
    and it is removed from the product's front page ? Is that because there is nothing
    more to update/correct on this mainboard ?  

    Yeah; You are right...Unfortunately the i865PE came out right after, and there is no market for it anymore, So as far as a New BIOS release :nooo:Unless some unforeseen Problem arises ...........Sean REILLY875

  • How the 865p neo POST F10 Flash Recovery work...

    i saw this "F10 Flash Recovery" option for my 865p neo board when the system start POST.
    check through the User's Guide and i can't find any info about the "F10 Flash Recovery" thing...?(
    how about other 865pe and 875p boards???
    are all newer 865/875 boards come with the "F10 Flash Recovery" when POST???
    how this thing work???
    how come the User's Guide never mention???
    anyone got any idea how this thing work???
    thank...

    Quote
    did a serch in the neyt and only find this got a bit info about the F10 thing http://si.tatung.com.tw/%E9%A9%85%E5%8B%.../AWD/Readme.txt
    1. Make a bootable system floppy disk by typing [FORMAT A:/S] from the DOS prompt.
    2. Download the BIOS file from MSI web page.
    3. Extract the BIOS file into the bootable floppy.
    4. Boot up system with the bootable floppy disk.
    5. Run Award (Ex. Awdfl770) or AMI (Ex. amifl822.exe) Flash utility & follow the on-screen
       instructions.
    6. After flashing the BIOS, reboot system, press [DEL] to go into BIOS setup.
    7. Select [Load Setup Default] for or [Load Optimized Defaults] and press Key [Enter] and
       press Key [Y].
    8. Press Key [F10] than answer [Y] to reboot system again and finish upgrade procedure.
    I think this F10 key (above) is (a shortcut key for [save & exit] inside BIOS).

  • 865P NEO wont stand by in XP

    Hi, this problem I think is related to my post titled "XP shutdown problem". I fixed it by turning on Keyboard PowerOn Function (installing XP SP1 didn't solved the problem. I only assumed).
    My new problem is when my PC goes to S1 standby it immedialty wakes up (all of the monitor events are set to ignore while in the wakeup, everything is disabled except Keyboard PowerOn Function).
    When the PC goes to S3 standby it won't standby until I press a key (could still heard the fans rotating)!
    865P NEO
    Maxtor Diamond 40G
    2 X 256MB TwinMOSS DDR 400
    Lite On DVD-ROM

    After a month of test and optimizing toverify MB stability, I just migrated to WInXP from WinME and noticed a difference in the way they "suspend" on the same board!
    I am using STR3 and have ACPI enabled:
    1. ME would suspend but leave the power supply completely ON - i.e. the HD's and fans.
    2. XP would suspend and shut down power to the internal optical drives and the case and PS fans.
    I do have KBDPOwerON disbled though.
    > When the PC goes to S3 standby it won't standby until I press a key (could still heard the fans rotating)!
    Can you restate this? What key do you have to press?
    ?(  

  • 865p NEO IDE Driver

    Hi,
    should i install the IDE driver for my 865p NEO board to fully take
    advantage of U-ATA 100 feature ? My system spec is shown below.

    Intel inf is enough, you can also install the intel application accelerator specificly for the IDE (IAA) but I don't like it.

  • 865P Neo - reboots unexpectly

    Hello,
    I just bouth a new 865P Neo motherboard and after I installed WIN XP Pro the computer reboots from time to time...for example if I am playing a game or listen music or even when I copy files from a disk partition to another...
    Here is my system:
    865P Neo motherboard
    CPU: P4 2,4 Ghz Nortwood FSB 133 Mhz Bus Speed 533Mhz
    Memory: DDR-SDRAM PC2700 256MB (Freq. 167 Mhz FSB:DRAM 4:5 CAS 2.5 RAS to CAS 3 RAS Precharge 3 Cycle time 7)
    HDD: Maxtor 40 GB
    Video: Matrox G450 Dual Head
    Power source: 3.3 V=24 A, 5V=35A, 12V=12A

    12A for +12v is only 120~130watts for the system, whereas a P4 with 2.4B GHz CPU will consume about 180watts with RAMs and CD drives + HDDs...
    Btw, have you install intel.inf driver yet? Tryi installing and see if it works.

  • 865P Neo Series

    865P Neo Series NOT "PE" can support M.A.T? ?(

    Bengho, listen up... You have got to look into the website again before commenting on!!! You are the one not catching the ball not me dude... and I've got the confirmation from MSI rep on this and I'm totally right. MSI rep has admit that the info from your link is incorrect for I865P chipset and they will do the alterations soon.
    FSB800 CPUs for MSI I865P and I845 are "OVER CHIPSET SPECS" or "OVERCLOCKED ONLY".
    Unlike MSI I865PE/G & MSI I875P series which can ORIGNALLY support FSB 800 CPU WITHOUT OVERCLOCKING NEEDED.
    If you would like to confirm, please read the original links below,
    MSI I845PE Neo
    MSI I865P Neo
    MSI I865G Neo2
    MSI I865PE Neo2
    MSI I875P Neo
    Hope the links sheds some light to your doubts...

  • 800 FSB, HT, and 865p Neo... Noob question

    Just installed my new motherboard, 865p Neo, with a Northwood 2.4GHz P4 800 FSB processor, and it's running at 1.99 GHz at 664 MHz FSB. Is this a jumper problem or a software issue? Please help. :(

    ?(  at the first place why you get a 865p for P4 800 FSB processor? you should get a 865pe or 875p. if can, go and get it change

Maybe you are looking for

  • Satellitle L755-S5306 display split into 3 screens

    I have a Toshiba Satellite L755-S5306 and have been experiencing a display issue, such that my laptop's screen is split into 3 panels nearly all of the time.  When I initially turn on the computer, the screen looks normal, but when it gets to the scr

  • CO Validation check Business Area

    Hi gurus, so my request is to give me solution about my validation. i wish skip business area to be fill in field - business area in KS01. My validation is: Prerequisite:  Controll. area = '1000' Check:Company Code IN COMPANYCODES (set all company co

  • Can you automate 'page turn' transition when exporting a document to Flash?

    I have created a multi-page document with a page turn transition which I have exported to Flash to upload to a website. The page turning works fine manually but I want to automate the effect, remaining on each page for 30 seconds before automatically

  • 9i runInstaller Compaq Tru64 UNIX V5.1 fails...

    I'm desperate to install the New Oracle 9i (we want to use this database as the Repository database for iFS.) My environment: $ env PATH=/usr/bin:.:/usr/local/bin:/usr/local/sbin:/usr/sbin:/oracle/product/9.0.1/bin:/usr/ccs/bin:/usr/openwin /bin ORAC

  • Windows 64-Bit Oracle DBCA creating new Instance ORA-27102: out of memory

    Wondering has anyone encountered this? We are running Oracle 10 R2 running on Windows Server 2003 ( This database is on a 64-bit Platform) Memory capacity is 16 GB on the server. We are using DBCA to streamline db creation of the new “EDR” DB instanc