865P Neo - reboots unexpectly

Hello,
I just bouth a new 865P Neo motherboard and after I installed WIN XP Pro the computer reboots from time to time...for example if I am playing a game or listen music or even when I copy files from a disk partition to another...
Here is my system:
865P Neo motherboard
CPU: P4 2,4 Ghz Nortwood FSB 133 Mhz Bus Speed 533Mhz
Memory: DDR-SDRAM PC2700 256MB (Freq. 167 Mhz FSB:DRAM 4:5 CAS 2.5 RAS to CAS 3 RAS Precharge 3 Cycle time 7)
HDD: Maxtor 40 GB
Video: Matrox G450 Dual Head
Power source: 3.3 V=24 A, 5V=35A, 12V=12A

12A for +12v is only 120~130watts for the system, whereas a P4 with 2.4B GHz CPU will consume about 180watts with RAMs and CD drives + HDDs...
Btw, have you install intel.inf driver yet? Tryi installing and see if it works.

Similar Messages

How the 865p neo POST F10 Flash Recovery work...

i saw this "F10 Flash Recovery" option for my 865p neo board when the system start POST.
check through the User's Guide and i can't find any info about the "F10 Flash Recovery" thing...?(
how about other 865pe and 875p boards???
are all newer 865/875 boards come with the "F10 Flash Recovery" when POST???
how this thing work???
how come the User's Guide never mention???
anyone got any idea how this thing work???
thank...

Quote
did a serch in the neyt and only find this got a bit info about the F10 thing http://si.tatung.com.tw/%E9%A9%85%E5%8B%.../AWD/Readme.txt
1. Make a bootable system floppy disk by typing [FORMAT A:/S] from the DOS prompt.
2. Download the BIOS file from MSI web page.
3. Extract the BIOS file into the bootable floppy.
4. Boot up system with the bootable floppy disk.
5. Run Award (Ex. Awdfl770) or AMI (Ex. amifl822.exe) Flash utility & follow the on-screen
instructions.
6. After flashing the BIOS, reboot system, press [DEL] to go into BIOS setup.
7. Select [Load Setup Default] for or [Load Optimized Defaults] and press Key [Enter] and
press Key [Y].
8. Press Key [F10] than answer [Y] to reboot system again and finish upgrade procedure.
I think this F10 key (above) is (a shortcut key for [save & exit] inside BIOS).

T400 is rebooted unexpectedly

Hello there,
I have a problem with T400 that the laptop is rebooted unexpectedly when I try to logon Windows(at GINA). It's rarely happened. Once it's happened. It become I can not use my Windows account with a message like "You can not use this computer with this account, Please use other computer". It's in Japanese so It will not be properly translated.
After several hours, I can use the Windows account.
Before shutdown PC manually, USB memory(ReadyBoost) was connected to the laptop. But, I'm not turned on readyboost on USB memory.Anyway I guess It might be a caused.
My environment is below;
T400
BIOS:7UET93WW(ver. 3.23)
Intel WiFi Link 5100 AGN(Driver ver.14.2.0.10)
TPM 1.2
Windows 7 Professional(Japanese) SP1 + latest hotfixes
CSS 8.3
Does someone know about this problem? Please help me.
Sincerely,

hey sbux0007,
the T400 of yours, does it have one user account or 2 and is it being use in an office network? I normally stumble across >> "You can not use this computer with this account, Please use other computer" .. when it is a system that has two user accounts and when the computer is set to use with a network.
since this rarely happens it is hard to pinpoint what is causing this. what i suggest would be that you keep an eye and make notes of what programs that you were using before the sudden reboot.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Blocked dram frequency - 865P neo

Hi
I have one problem my dram fraquency is blocked in bios. it is set up at 400Mhz and i can't change it :(
I have msi 865P Neo and 2x256 DDR 400 (PC 3200) (dual)
Do you know what i should to to change it ??

Quote from: garthol on 22-July-07, 00:13:41
"400" is what's greyed out
Configure Dram Timing by SPD:
both options doesn't change this situation.
when is disable is block and when enable is the same.
Come on garthol,
Please help yourself by reading through your own products specs, if you think that I'm not of any help. If you are saying that you want to set to 400MHz manually earlier, then we'll know what you want.
The thing is, this board is running on the old ICH5 chipset and does not have native DDR400MHz support. All you can do to acheive DDR 400MHz speed is by overclocking, nothing else.
Please read product page: http://global.msi.com.tw/index.php?func=proddesc&prod_no=542&maincat_no=1&cat2_no=&cat3_no=
If this is not clear enough, you can try this > How to contact MSI.

Windows 2008R2 SP1- No memory dump file is capturing when server is getting rebooted unexpectedly

Hello,
Windows 2008R2 SP1- No memory dump file is capturing when the server is getting rebooted unexpectedly. Tried allmost all options per the standards, no luck. Can someone help me to fix the issue.
Thank You

An unexpected reboot would not trigger a memory dump. This one may help if you're trying to generate a dump file.
Windows feature lets you generate a memory dump file by using the keyboard
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

865p neo serie problem

Hi !
I change my motherboard for MSI 865P Neo with Intel 2.4 Mhz 800 Mhz Hyper threading function and 256 MB DDR Ramm 333 Mhz.
My problem is every time i try to install windows XP I get problem with some file that say is corrupt butni change the Xp cds and Cd-rom and still can install it. I change the hard drive and use the same hard drive to other computer and work well Just on the board i got that problem.
Some one tell me that motherboard dont work well is dont have Kisnton memmory.
Plz help is any one now about this problem

Try raising your memory voltage to 2.7 then install Windows again.

865P Neo - LED meaning?

I just put in the new 865P Neo board with a P4 2.4 HT & Kingston 512 DDR400 stick. When I try to boot it (btw never get anything showing on the monitor) - I get to only the #3 green showing (all others red) and beeps twice in succession then once a second or two later. What's the meaning of this? The manual says "Allocating resources to ISA" - no idea what that means.
Note: I've taken all the cards (both PCI and AGP) out, unhooked the drives - still same #3 laughing at me.
Other note - when I take out the memory stick - it stops at #2 green only. Doesn't make much sense because that means initializing the floppy!
Note2: I also get like 9 beeps on the #4 green only - but it continues on...

You only have One stick of ram? I had the same problem and came to find out that it was a memory compatibility issue. So try using a different stick of memory and see how that works. If it doesnt work, Then check your jumper settings. Try using O/B sound and video to see if you can get to the bios and work it out from there.

865p neo boot up screen Question

i'm using 865P neo with MSI MX440SE-T(8788) 64mb graphic card. i realized that my PC boot up without the graphic card information page. if i'm not wrong, noramlly when PC boot up the first screen we see will be the black screen with all the graphic crad information after that then is the bios page. i don't see all these graphic card information since day 1. is my PC set-up having a problem or the 865p neo don't support that function? thank.

Quote
Originally posted by buddie
MSI\'s 865P has a new feature called boot logo. By default it\'s MSI logo and the 8X series logo. I *think* you can personalize this logo to suit your need.
This logo however, hides the boot up process. If you need to see what\'s going on, Just disable it in the bios.
ya, i had disabled that. i think what i mean should be the "video bios info on POST". i did posted my question in other forums and so of the guys told me it is normal for some PC that don't show the video bios post and its is nothing to worry about actually...

Problem with MSI 865P Neo and G4 Winfast

Hi all,
I bought the mainboard MSI 865P Neo. Have put it into G4 Winfast A280 LE TDH my vivo. And the problem appeared.
When I doing whatever in Win (for example open explorer, mouse rightclick ...) the screen is simply runing over.
Seems like a video card doesn`t handle it or Screen (monitor) is poor but it`s not. The same problem appears also while Windows is installed.
Little note I want to add is my G4 has new Bios setup and on my second card Leadtek G2 MX everything`s ok. It seems for conflict between the mainboard and my v-card. Have you met similar problem ?
Would be grateful for an answer
Best regards

On my old mainboard - ABIT ST6R (with G4) everything was ok. I changed mainboard, RAM and P4 and problem has appeared.
MSI supports AGP 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V (3.3V not supported)
If G4 needs 3.3V (I can't find G4 how much needs) that problem is obvious. I must change mainboard.
Anyone knows how much G4 poverage needs?
P4 2.4
MSI 865P Neo
G4 Winfast A280 LE TDH my vivo
512 RAM Kingstone 333Mhz
Barracuda IV 80Gb
Barracuda III 40Gb
LG DVD
LD CDWR
SB Live
POWER 300W

865p neo windows install problem

Hi All!!
I have board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
I Hear that 865p series baord alnly work well on Kigston memories Ram.

Quote
Originally posted by bjs_solo
Hi All!!
I have board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
I Hear that 865p series baord alnly work well on Kigston memories Ram.
Double post!
http://www.msi.com.tw/program/service/forum/index.php?threadid=28852&boardid=10&styleid=1

TWO DEAD 865P Neo's

Ok...this is seriously bugging me. :O I bought a 865P neo board 2 weeks ago, and about a week after using it, the mobo went dead. I went and exchanged the board for another 865, installed it, and everything on the comp worked fine. Then a few days later....same thing. The mobo went dead. It doesn't power up at all. When I hit the power button, the fan for the CPU twitches, but nothing powers up. I know the PowerSupply is fine because I tried it on another computer and it worked great. If anybody out there is having the same problem or knows what's goin on I would really appreciate your help....My specs are listed below. I haven't done any BIOS updates either.
SPEC
MOBO: MSI 865p neo
CPU: Intel P4 2.66Ghz 533Mhz FSB
RAM: Kingston 512MB DDR400
PSU: Allied 350W PS
HD: Western Digital 120GB w/ 8mb Buffer
Video: Gainward GeForce4 Ti4200 128Mb DDR
CDROM, DVD, FLOPPY

I tried clearing the CMOS but that didn't work. I also checked out the lights on the D-Bracket and i'm getting a Green Red Red Red, for lights 1,2,3,4. I looked online and that sequence is supposed to be the early chipset initialization. This thing is really bugging me....if you guys know what's goin on...I would really apprecite the help.

Help!!! Intel 865P Neo Board

Dear All,
Currently, I've changed my MSI board from Intel 845GE Max-L to 865P Neo Board and seems like I was unable to play games (eg: NFS HP2, C&C General). When I start up the game, after the movies introduction, supposed it will reach the main menu, but it hang there, no display, my monitor power cut off, no sound either. I can't see anything at all.
Everything was running fine, except running games. Should be Intel 865P better than Intel 845GE. Hope you guys can help me solved this problem for me. The BIOS setting is set to default, no overclocking.
I've change my system from:
P4 2.0GHZ
MSI Intel 845GE Max-L
512MB PC2100 (DDR266)
to:
P4 2.53GHz
MSI Intel 865P Neo Board
2X 256MB PC3200 (DDR400) = 512MB
Using the same graphic card:
Hercules 3D Prophet Radeon 8500LE Series (4X AGP Card)
Pls help!!! Thanxs!!!!
?( ?( ?(

Quote
Originally posted by funks
Quote
Originally posted by ernmahkh
Quote
Originally posted by funks
Try forcing your RAM to 266 in the BIOS and see if it works any better..
Any ideas how to do it?? I can\\\'t find any setting for RAM to be set to 266 in the BIOS...
Hmmm, it\'s in one of the menu options (where you can set processor voltage and such)..
There\'s 4 possible settings for it when I looked (266, 333, AUTO, 400)..
Take it off AUTO and set it to 266..
I tried wat you have told me...set to 266MHz
still the same... Monitor power will just cut off. Cannot see anything. Do u guys think is the power supply prob?
I'm using a 300Watt PW. but I was wondering if PW not enough, it will not be able to bootup.

865P Neo board outdated

Hello,
just wondering how come this msi 865p neo board had only 2 bios revision
and it is removed from the product's front page ? Is that because there is nothing
more to update/correct on this mainboard ?

Yeah; You are right...Unfortunately the i865PE came out right after, and there is no market for it anymore, So as far as a New BIOS release :nooo:Unless some unforeseen Problem arises ...........Sean REILLY875

865P NEO wont stand by in XP

Hi, this problem I think is related to my post titled "XP shutdown problem". I fixed it by turning on Keyboard PowerOn Function (installing XP SP1 didn't solved the problem. I only assumed).
My new problem is when my PC goes to S1 standby it immedialty wakes up (all of the monitor events are set to ignore while in the wakeup, everything is disabled except Keyboard PowerOn Function).
When the PC goes to S3 standby it won't standby until I press a key (could still heard the fans rotating)!
865P NEO
Maxtor Diamond 40G
2 X 256MB TwinMOSS DDR 400
Lite On DVD-ROM

After a month of test and optimizing toverify MB stability, I just migrated to WInXP from WinME and noticed a difference in the way they "suspend" on the same board!
I am using STR3 and have ACPI enabled:
1. ME would suspend but leave the power supply completely ON - i.e. the HD's and fans.
2. XP would suspend and shut down power to the internal optical drives and the case and PS fans.
I do have KBDPOwerON disbled though.
> When the PC goes to S3 standby it won't standby until I press a key (could still heard the fans rotating)!
Can you restate this? What key do you have to press?
?(

865p NEO IDE Driver

Hi,
should i install the IDE driver for my 865p NEO board to fully take
advantage of U-ATA 100 feature ? My system spec is shown below.

Intel inf is enough, you can also install the intel application accelerator specificly for the IDE (IAA) but I don't like it.

865P Neo - reboots unexpectly

Similar Messages

Maybe you are looking for