865PE Neo2-V Conflict, keeps rebooting.....

Hi,
I have recently bought a MSI 865PE Neo2-V mainboard but it keeps rebooting all the time at intalling windows xp.
One time i did manage to install winxp but after installing other software the computer reboots.
I doublechecked the CPU and Memory.
So i think it is the Bios settings. Can anyone help me out with this problem?
This is my system:
MSI 865PE Neo2-V
Intel Pentium 4 3.0Ghz
160 GB WD
512 MB DDR Twinmos Memory
350 Watt PSU
Sapphire RADEON 9250

Quote from: fafner on 08-March-05, 22:55:30
ok. let us know what happens wnen you try the different psu.
Hi again
I tried an other PSU and it works!! I can't thank all of you enough.
I think it was my PSU that was not compatible with the mobo or that the PSU was corrupt.
Anyways PROBLEM SOLVED!!!
Thank You.

Similar Messages

865PE NEO2 FSIR fails memory tests

This is the second MB that I've had this problem with, so something is causing them to fail. Here's the story:
New install, 865PE Neo2 FSIR + P4 2.6GHz 800MHz FSB, 2 x Crucial PC3200 256MB DDR, everything seems ok, XP installs with no problems.
About a month down the road I'm plagued by sudden reboots, Microsoft Error Reporting says RAM, says to DL and run it's DOS memory check utility. I get the utility, create bootable CD and run the utility, computer fails all RAM checks. I pull each RAM stick in turn and re-run the check with each stick separately, still fails all tests. Shortly after this, the board refuses to POST. Ship the board back to New Egg for replacement.
Installed replacement MB with 4 x 256MB Crucial PC3200, Microsoft DOS memory check program passes, no problems. About 2 weeks later I run into minor instability so I run the same memory check again, the board fails all tests????? I pull all Crucial memory sticks and put in a test stick of Corsair XMS 3200; same result, failure of all memory tests.
At this point, WinXP still runs, but this is the same pattern that the other board showed, right until it quit altogether.
It occurs to me that I DID flash BIOS to 1.9 between the time I first tested the RAM and got a pass and the time I tested and got a failure, could this be a coincidence? I can't remember if I updated the BIOS on the first board or not, so this may mean nothing.
System Specs:
MSI 865PE NEO2 FSIR
P4 2.6GHz, 800MHz FSB (all defaults, no overclock, Vantec HS)
Crucial CT3264Z40B.8T PC3200, CL3 256MB (2 Modules)
Crucial CT3264Z40B.8T2 PC 3200, CL3 256MB (2 Modules)
(Tested with same results with single Corsair CMX512-3200C2PT 512MB)
Antex True Power 430W PS
ATI Radeon 9600 Pro
All PCI slots open
Seagate 120GB System drive, 7,200RPM primary master
IBM 30GB drive, 7,200RPM primary slave
LiteOn DVD ROM secondary master
Sony CDRW secondary slave
2 x IBM 30GB drives on Promise PATA.
I know I'm probably gonna have to RMA this board, but I'd really like to know what is causing this so I can avoid it next time.
If anyone has any ideas I'd sure appreciate it.
Scott

Quote
Originally posted by jwspicer
As they say - been there, done that. Always flash using DOS, and always keep backup, so I went back to the original BIOS for the board. No luck. Apparently once the screwup is done - it stays that way.
--BUT--
Suspect it is the reallocation for the P4 EE that is the issue. Reason is that Memtest86 has been running on that box for 9 hours now with NO error. However, it also shows only 104K of reserved memory. My other 865 board with onboard RAID (an ASUS P4P800 Deluxe) shows 687K reserved. So either the ASUS is wasting a lot of space, or the MIS is no longer correctly indicating the amount of memory reserved by the BIOS (including the Promise BIOS) at startup. Then Microsoft's utility is not correctly scanning. But Memtest, which probes for the "correct" setting, is. (The Memtest86 version is 3.0, and the test was done with the Promise enabled and drives attached (so the BIOS loads) and all the other setup was as it would be normally (standard IBOS options, etc.)
So who's right? And if MS' tool has the problem, does that indicate Windows XP reads memory the same way? Hmmm...
Hmm, I haven't tried reverting BIOS, but I'm typing this on the affected machine (which Memtest 86 says is fine) with only the two RAM chips it likes and so far no problems; I've run PCMark4 and 3DMark4 benchmarks all night and no problems, it was still happily churning away on 3DMark this morning. I guess either one of the Crucial sticks it doesn't like is bad or Crucial changed something in a revision to the chips it doesn't like.
Just a FYI, the Crucial sticks it DOESN'T like are CT3264Z40B.8T2
The sticks it DOES like (at slow or fast performance, forget about turbo or ultra turbo) are CT3264Z40B.8T
Both pairs are PC3200, CL3, 256MB DIMM's, single sided.
I think you're right about Microsoft's RAM tester being buggy, I can't believe ANYTHING could run if the RAM was actually giving the errors it shows, EVERY test shows things like "expected result 11111111 actual result ff1e0001" The Microsoft tester does run fine on the other 5 computers here; a mix of laptops and desktops; none using this board. It also ran on this board when it was installed, I guess the BIOS upgrade must be the cause.
Scott

865PE Neo2-V problems

I'm hoping this is the right area to ask for help... Ever since I got this MB it's been nothing but trouble. I bought it, took it home, hooked it up, no power. So I went back to the computer shop I got it from and asked them what's wrong with it. After taking my system in for them to make sure it was setup right, they informed me that I had to send it back for RMA work. so now, about 2-3 months later I finally got a new board back, and have random reboots. I've tried everything I could think of to figure out why it's randomly rebooting and am stumped. One surefire way to make it reboot is opening the front of my case, that does it everytime, so I tried a different MB to see if the same problem happen. It doesn't... Was there a re-call or something on these MB's? I hate to do another RMA and be without a computer for a few more months, since I work out of my home, and my computer is a main part of my work... I can't afford to send this MB in again. I've got the latest BIOS update, my RAM is set to 2.5,3,3,8 (per manufacturer). I have a 2 gig P4, that works fine in my other board. Even bought a new SATA HD for a fresh install of windows XP and still, the random rebotos happen. I'm not trying to OC or anything along those lines, since the chip I have shows almost no increases from OC's, so it's not from OC'ing it.. I'm running a 480 watt power supply, and that should be more then enough juice for the board... Sorry to rant and rave, but been working on this for about 3 weeks and about to pull out all my hair, since everytime I think it's going to be ok and I start to actually accomplish some work, it reboots, before I have a chance to save anything...
I guess I'm asking if anyone else has had these problems with this MB, or do I just have that kind of luck? I've been looking over the boards here for the last week or so and tried pretty much everything I've found, under a search for random reboots, to no avail. Here's a list of what I can think of off the top of my head that I've tried... <deep calming breath> Changed the BIOS through every version since the initial BIOS the driver disk has on it, re-seated the RAM in different places in the DIMM's, Memtest388 or whatever it is with 0 errors on a 10 hour test (the longest it's run without a reboot since day 1), pulled the graphics card and re-seated it, put more fans in, taken them out, took the power supply in to have it tested (it's fine), replaced the RAM with new shiny RAM that's tested fine, tried a different case, reset the CMOS, tried a different chip, tried numerous power supplies, checked the voltage at the surge protector, replaced all old components (CD drives, floppy drives ect...) traced each individual wire checking for breaks insulation problems, software tests out the wazoo all saying it's fine, new heat sinks, new thermal gel, put the computer on top of a cold vent (thinking of might be to hot) and so on... I guess I should list my setup since every component in the case has tested out fine at the shop and I can't afford to replace anything else...
865PE Neo2-V MB with a Intel 2.0 gig P4
512 x2 corsair VS512MB400 RAM sticks
Asus N6600 graphics card (Nvidia)
480 watt power supply
Sound Blaster live! 5.1 gamer
BIOS version 6.2
At first I thought it might be overheating, but the processor and RAM stay around 37º and 39º give or take 2º. I've also checked for virus's/spyware/adware to many times to remember with none found. Any help would be greatly apprieciated before I get so fed up that move to a cave and rely on an abacus for record keeping...

I have almsot the same set-up as you have.
I didnt have these problems though.
One thing that comes to mind is a grounding error.
Have you checked the space between the motherboard and the side of the case its mounted to?
I read that you tried a diffrent case, but it could be some issue with one of the grounding points where you put the screws in perhaps.
I know that the Spread Spectrum setting in BIOS can cause some disturbances, but it shouldnt really be enough to make it reboot though.
But check that one anyway, ON and OFF.
A bit info on Spread Spctrum:
"Spread Spectrum
When the motherboard’s clock generator pulses, the extreme values (spikes) of the
pulses creates EMI (Electromagnetic Interference). The Spread Spectrum function
reduces the EMI generated by modulating the pulses so that the spikes of the pulses
are reduced to flatter curves. If you do not have any EMI problem, leave the setting at
[Disabled] for optimal system stability and performance. But if you are plagued by EMI,
activate the Spread Spectrum for EMI reduction. Remember to disable Spread
Spectrum if you are overclocking because even a slight jitter can introduce a temporary
boost in clock speed which may just cause your overclocked processor to lock
up. Options: [Disabled], [Enabled]."
I assume you tried to run the Load BIOS Setup Defaults.
Also make sure that all the jumpers on the motherboard are set right, there might be some of the set wrong by accident, check with your manual to be sure.
You can try this to, take out your motherboard and place it at a non-conductive material.like wood or glass and attach all the components u need to do a boot-up, and only those, and see whats happening.
If it runs ok like this, then it might be some sort of short-circuit somwhere.
I think i read about an ASUS board that had some components near the CPU that somehow got in touch with, either the heatblock, orsome connection point of the fan-mounting and it caused some serious problem for people.
I took quite some troubleshooting to find that out for them.
All i can think off right now, at the top of my head, but try this, if you havent done it already.

865PE Neo2-PFISR failure

Hello,
This is my first post here so I would write down my system configuration at first:
my MSI mobo: 865PE Neo2-PFISR (with BIOS update to V3.A since 21/01/2005)
CPU: Intel Pentium 4 HT 2.8E SL79K
RAM: 2GB Kingston 400MHz DDR (4 x KVR400X64C3A/512)
Graphics Card (GPU): Club ATI 9600XT 256MB AGP 8x
2 SATA HDDs: 320GB + 160GB Seagate Barracuda 7200rpm
3 IDEs: SONY DVD-ROM 16x, PLEXTOR CD-RW 52x, NEC DVD-RW DL 16x
Sound Card: TASCAM US-122 (External USB)
Power Supply (PSU): Seasonic S12+ 550W 80plus (+3,3V@24A, +5V@30A, +12V@18A, [email protected], +5Vsb@3A) http://www.seasonicusa.com/s12plus.htm
Monitor: EIZO L550 17" LCD with DVI cable connected
O/S: Dual boot on Kubuntu 7.10 and Windows XP (separately in each HDD)
using BIOS IDE setup: Native Mode configuration with S-ATA only, both P-ATA keep Enabled and no RAID which is the only configuration that my Linux installs or starts and USB Legacy Disable for starting a Windows XP installation otherwise it crashes after a CD-ROM boot in the first blue LOAD screen of the bootable Windows XP.
so I would like to discuss the failure problem that I have:
Sometimes I push the pc's power button to power on and the system gives power to the peripherals (CDs, HDDs, FANs, etc) but the screen does not open at all and the front HDD's orange led stays always ON still. The "D-Bracket 2" shows at once started 2 green leds (2nd and 3nd) and two yellow (?!?!?!) or 2 red (2nd and 3rd) and two yellow (?!?!?!). I'm surprised about the yellow!!! I tried out several setups after failure like: barebone, just the CPU installed with no memory, GPU or HDDs etc, another different type of PSU or unplugging any cable (from the USBs' or the D-Bracket's to the Power/HDD/Reset Leds and the FANs') but nothing changed at all. Finally if I "Clear CMOS" using the Jumper JBAT1 as the manual's information, everything goes well and the pc starts excellent again but then, in a random time after a power on or a restart it does the same failure. I do this post because this was happening really rarely in the past but now this is happening usually (once in a week I can say) with no hardware change since a while. Thank you in advance for your time and I will be thankful for any help.
I'm sorry for my bad English.
Greetings from Greece
Christos Kyrkilis

Quote from: Del UK on 07-February-08, 04:31:04
You have HSF that has retention socket with back plate
Have you done a strip and reassemble of this as yet..........
Could you please rephrase what you've posted cause my bad English couldn't help me understand what you mean. Sorry

865PE Neo2 -FIS2R Problems

I purchased a brand new MSI 865PE Neo2-FISR along with a P4 2.4C(OEM), a Thermaltake Spark 5c cooler and a Corsair XMS Twinpack(TWINX512-3200C2PT) of DDR400 memory.
The install went fine, the system booted and ran very well right out of the box. I installed the Live Update program from MSI and it updated itself. I then used that utility to generate a BIOS flash/recovery disk to update the bios from 1.10 to 1.30. The update worked fine and I rebooted the machine into Windows XP with no problems.
I then decided to do some tweaking in the new 1.3 BIOS. After several unsuccessful memory/Dynamic Overclocking settings the system refused to boot. I tried the Clear CMOS jumper to reset the defaults but it still would not boot. I checked the D-Bracket, 3 red 1 green(lower right) which indicates that the video card is not initializing. I attempted reseating the video card (a PNY Geforce4 TI4200) with no luck, I then replaced that card with a GeForce4 MX440 SE with no luck. I tried four other video cards, 2 AGP and 2 PCI, with no success.
At this point I pulled the board out of the system and let it sit with the battery out of the board hoping that the BIOS would reset to default values. I reinstalled the board with all the hardware and again the same D-Bracket error with no video generated. I tried different arrangements of memory using the new Corsairs and various other DDR333 & DDR266 again no luck.
What is going on with this thing? How could an errant timing change completely lock out the VGA card? And why can I not clear the settings to allow the card to initialize?
This thing is getting RMA'd soon if I can't find an answer.
Anyone have any ideas or similiar troubles? X(

Quote
Originally posted by gary172
Another thing I don\'t understand about all the isses with BIOS 1.3, performance, RAM and timings etc, is - How can the 865PE Neo2 - FIS2R pretty much come out at the top of the heap in Tom\'s Hardware Test:
\"The board therefore achieves the best performance in the whole test field.\"
http://www6.tomshardware.com/motherboard/20030707/i875p-46.html
with MAT and DOT enabled, without any apparent negative reports of stability.
Is it that he used a Beta Bios: V1.3B3 (06/12/2003)
Or was his MSI board a \'pre-press release\' mobo similar to the ASUS board and the production versions we are buying are missing certain components?
http://www6.tomshardware.com/motherboard/20030603/865_PAT-06.html
Or did he have \'hand picked\' memory from Corsair \"2 x 256 MB, Corsair PC3200 TwinX\" and didn\'t report it?
There are a lot of reviews lately that have it as one of the fastest MB's around at the moment, here are a handful I found:
http://www.mbreview.com/neo2pe-10.php
http://www.thejemreport.com/reviews/865peneo2.htm
http://www.hardwarezone.com/article...&aid=795&page=1
http://www.hexus.net/review.php?review=564&page=1
http://www.pcstats.com/articleview....eid=1402&page=1
http://www.techview.nl/reviews/2959

865PE Neo2-FIS2R, memory question!

Hi!
I´m thinking of buying memory for the 865PE Neo2-FIS2R mother board and have a few doubts that are on my mind.
1. If I want to use DualMode memory, should I use 256+256 or 512+512.
Lets assume that I buy 2x 256MB and uses them as DualMode.
Can I later put another 2 x 256MB into the computer and use them all as DualMode, (256+256+256+256) or is only possible to use 2 of each size.
Maybee I should buy 1x of 512MB and use it as SingeMode and later complement with another 512 and use them as DualMode.
hmmmmm.......any point of views?
The memory I´m talking about is:
Corsair CMX256A-3500C2 256Mb DDR PC3500 CAS2 434MHz
Corsair CMX512-3500C2 512Mb DDR PC3500 CAS2 434MHz
I assume that they are the same as MSI has in its
"DDR400 Memory Modules Qualified Vender List " and should work just fine with the motherboard.
Regards
WiGGoW

I would not go with that brand of ram. There are alot of issues being talked about involving that ram in this forum. I recommend Kingston and so does MSI. Keep in mind to obtain Ultr-Turbo in Bios you need to buy a latency of 2 or you will get an error message and your bios will reset to slow.

865Pe Neo2-V: Froze- no display- no beep. mb or cpu problem???

motherboard: 865Pe Neo2-V
cpu: intel p4 3.2ghz
memory: kingston 512x2
vga: ati radeon 850xt
The problem i'm having is this...
Everything was working fine and all of a sudden my computer froze.
So I tried ctrl+alt+del but didn't work so i pressed the reset button.
I was waiting for it to reboot, but i hear the fans running but no display.
So i thought maybe the monitor was the problem but
i tested it with a different computer and it's fine. and the hard drive too.
What i noticed is that after the computer starts, I don't hear the beep (once) that it's running ok and
proceeds with the actual booting with hard drive.
Then i thought it's the vga, and tested, but it's working ok.
I think it's between motherboard and the cpu...
So i decided to test the beeps, and I ran the comp without any memory, it didn't beep.
Tried without the cpu, didn't beep.
Could this be the motherboard problem? or the CPU?
If so (whichever one), why would this happen??
For anyone who knows this, please help me out.
Thank you for reading..

Quote from: infiniteflow on 01-March-07, 01:06:17
any help?
anyone?
re-seat CPU,(ensure its mounted well, check it for damaged CPU pins, test it into another machine if its possible) apply new thermal paste(but not too much), clear CPU socket from any dust around. check all power cables. try barabone setup.(take board out of case too)
test with one of memory stick only in DIMM slot close to CPU socket, then Clear CMOS (ensure power cord are not connected to the PSU before proceed with Clear CMOS.)
re-test.
if no go test it with different and better PSU. good PSU suggestion can be found here and above:
https://forum-en.msi.com/index.php?topic=105635.msg783120#msg783120
if still no go, found a way to test CPU somewhere else to ensure its work. if CPU works must be failure board then.

865PE Neo2-V problem/bad BIOS ver. 6.2

A new BIOS for the 865PE Neo2-V has been posted at http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=612&kind=1. This BIOS did not work for me and I had to revert to version 6.1. If you plan a BIOS update, make sure you keep your previous version handy!
Symptoms: after the flash, the system would not post. I had an 8-beep error code (video problems on AMI BIOS). Removing either or both video cards did not help, neither did the usual (re-set BIOS by jumper, remove battery, remove RAM, disconnect HDs, etc.) Using the recovery flash method (place BIOS file as AMIBOOT.ROM on a floppy) with version 6.2 resulted in the same issues. Recovery flash to version 6.1 and all worked fine again.
System specs (if more details are needed I can provide them, I'm not at the system in question right now).
865PE Neo2-V (MS-6788)
2x 512MB RAM (Corsair? I would need to dig for specifrics)
NVIDIA GeForce 6800GT in AGP slot
NVIDIA GeForce FX 5500 in PCI
(plus a bunch of HDs and USB devices, but this problem occured even with all this removed).

Quote from: crazy on 28-February-06, 08:36:40
I just want to ask one question: you said that after you flashed the bios to the 6.2 version, then it could not even boot. Thus could you tell me how could you flash the bios to 6.1 version?
There is a way to flash the BIOS even when the system won't boot. For AMI BIOS (as on this board):
1- Format a floppy, and copy the BIOS file to it.
2- Rename the BIOS file to AMIBOOT.ROM
3- Put floppy in the drive.
4- Power up system while holding CTRL-HOME
5- Wait until you hear floppy drive access, then you can release CTRL-HOME
6- When you hear 4 beeps, the BIOS had been flashed from the file on the floppy.
7- Power off, reset BIOS by jumper (just to be safe) and then power up again.

Questions on DOT with 865PE Neo2

I did the "Load High Performance Defaults" for the first time.
Just wondering if everyone experiences the same results??
I have read many thread here on problems, but want to post some
positive results and in the same breath have some questions.
I have burnt in the system and done some SiSoftware Sandra benchmarking
with good results. Also used Performance Test 4.0 software that gave a
PassMark of 344.5 and MegaFlops of 1243.3 This is running in the "Load Bios Defaults". So no DOT!!
When I set the High Performance Defaults, I have to go back into Integrated Periphials/ On chip IDE config to set the ATA config again for my hard drive that is connected to channel one of the S-ATA. Everyone, the Quick User Guide is just that, a guide. Would someone kindly explain the settings?? 1st, Does it make a difference with the S-ATA only or S-ATA and P-ATA in the ATA configuration??
2nd question. Why is the S-ATA Keep Enabled and Combined Mode Operation a light blue/green color where the others are white?? I think I understand the difference in S-ATA and P-ATA. that is Serial- ATA and Parallel ATA. I am using the Maxtor Serial- ATA drive connected to channel one and I have a MSI cd writer connected to the secondary parellel conntroller. Future connection with a MSI DVD writer on the primary ATA controller.
So far I have not experienced any crash in the High Performance Defaults mode and ran the SiSoftware Sandra last night for about 1 hour.
In fact I just ran and compared the Performance Test 4.0 software again and compared with a test ran without the DOT. Guess what?? The DOT is noticeable lower results this morning... Why is that?? I thought the DOT and Hperthreading would increase performance?? PassMark is now 303.2 and MegaFlops is 227.2
I have noticed that the SiSoftware Sandra performance tips say the "mainboard temperature is too high" that is at 39 degress C. Processor is at 45C and case temp at 35C.. This sounds ok to me!! Any comments?
SiSoftware Sandra performance of Maxtor drive
Buffered Read : 108 MB/s
Sequential Read : 48 MB/s
Random Read : 7 MB/s
Buffered Write : 113 MB/s
Sequential Write : 47 MB/s
Random Write : 13 MB/s
Average Access Time : 8 ms (estimated)
Any comments would be appreciated!!
So far I have not any problems with this MSI board and Intel processor.
MSI 865PE NEO2 FIS2R Bios 1.3
2 X's Crucial 256MB PC3200
ATI All in Wonder Radeon 7500 64 MB
Maxtor 120 GIG S-ATA 8MB cache
Windows XP
MSI CD-R/RW 52-M
3 1/2 floppy drive
Antec Sonata Silent case 380 PSU
Hyperthreading is enabled
Logitech Duo Keyboard/Mouse
USR 56K MODEM

For SATA Only, SATA & PATA, PATA Only Qn, the answer is, there are differences in all these mode. 1st, if you switch to SATA only and PATA Keep Enabled to "NO", then you can only run SATA drives and no PATA drives. If you've switch to PATA and SATA, this will enabled you to run both types of drives in your system, but if you've encountered problems, then you may have to switched to SATA only and set PATA Keep Enabled to Yes. Hence for PATA Only, will means that this will enabled your system to support only PATA drives.
As for the coloring of the modes, I think that they are being purposely color coded for the ease of the user on the different options available.
D.O.T is supposed for you to adjust settings in a ranking order starting from Private status to General. Each has a certain increment percentage of the FSB starting from 3% to 10% Max. In your case, I don't think that you're o/cing through D.O.T yet, but having to run at high performance stablely is a good start.
HT- HyperThreading. This technology will virtually splits your current processor to run in Dual mode. As I've mentioned "Virtually", so it will only split your processor calculation and arthematics of your CPU into 2 so that each can process data transfer etc on its own and in turns giving more advantage to application and server like processing and not really in terms of gaming or other applications.
Hope all this helps.
All the Best... :D!!!

865PE Neo2-PS sound problems

Hi,all. I just got a 865PE Neo2-PS board last week,but found some problems with the sound.When i was running some games(e.g ut2004,nfs) for some while,the sound would just stop.And i got back to desktop,all the media files could not be played either.I checked it in directx,the result is directsound error 0x88780032, DSERR_INVALIDCALL. I can do nothing but to reboot my pc,and sound is in good condition again.I've updated the Realtek Avance ALC AC'97 Audio Drivers and INF Drivers,but that doesn't work.Could somebody help?

Hi
It sometimes happens that when playing Battlefield 1942 the sound just disappear.
The only thing I can do is to restart the game.......
It´s not often but it happens.
And for Maesus : dont u mean DX 9.0b......and not 9.1b
If you find an answer, let me know m8!

My MBP keeps rebooting....!!!!

Hi guys I hope you will be able to help me
my mbp keeps rebooting every 15 minutes approximatively.
here is the kernel panic message :
Anonymous UUID:       BE16E9B5-F3D8-4A31-A408-6D7BB900F9AB
Tue Mar 25 11:27:55 2014
panic(cpu 0 caller 0xffffff8005adbe2e): Kernel trap at 0xffffef7f8644d940, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef7f8644d940, CR3: 0x000000002406d000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffef7f8644d940, RCX: 0xffffef7f8644d940, RDX: 0x0000000000000000
RSP: 0xffffff80f6e9bfb8, RBP: 0x0000000000000000, RSI: 0x0000000000000000, RDI: 0xffffff8020b92f78
R8: 0xffffff80060d2b30, R9: 0x0000000000000000, R10: 0xffffff80f6e9be20, R11: 0xffffff8006089ce8
R12: 0xffffff801777eb20, R13: 0xffffff801a054000, R14: 0xffffff80060d2ab8, R15: 0xffffff801a054028
RFL: 0x0000000000010246, RIP: 0xffffef7f8644d940, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef7f8644d940, Error code: 0x0000000000000010, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f6e9bc40 : 0xffffff8005a22fa9
0xffffff80f6e9bcc0 : 0xffffff8005adbe2e
0xffffff80f6e9be90 : 0xffffff8005af3326
0xffffff80f6e9beb0 : 0xffffef7f8644d940
BSD process name corresponding to current thread: Adobe Photoshop
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000005800000
Kernel text base: 0xffffff8005a00000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 654837165862
last loaded kext at 269622262382: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f86a26000, size 65536)
last unloaded kext at 494781948647: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xffffff7f86a3e000, size 8192)
loaded kexts:
com.oxsemi.driver.OxsemiDeviceType00          1.28.13
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.15
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.GeForceTesla          8.2.4
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleMuxControl          3.4.35
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.AppleUSBCardReader          3.4.1
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleUSBHub          666.4.0
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.nvenet          2.0.21
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBOHCI          656.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOAHCISerialATAPI          2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: iPhone
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: PTK-540WL
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Thanks in advance for your help !

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

865pe neo2-ls : i can only use slow mode

i can only use the slow performance mode....can't use fast or turbo mode. If i choose fast or turbo mode, the computer can still boot up. But it will reboot automatically within seconds windows boot up.....
my configuration is:
pentium 4 2.4C
865pe neo2-ls
2x256mb ram ddr400 kingston
windows xp w/sp1
can anyone help me???

Quote
Originally posted by jpscwf
adamchubb: My dram setting is 3,3,2,5 in turbo mode n very stable. As 4 ur configuration, it is same as mine.
I can run my cpu maximum fsb 280 with force the dram frequency to 266.
I suggest u 2 set ur fsb 2 250 n ur dram to 333. Which ur ram will running 400MHz assynchronous with the 250FSB but this will disable the M.A.T.
Anyway, what is ur cpu, NB n sys temp?
Mines 1 is cpu=57, nb=42, sys=49 at full load.
i'm not sure if my pc is at full load.
i just open several windows, playing back dvd, online streaming video, playing back mp3. CPU ~60, NB~4x, Sys ~5x

~HELP!~ WINXP WON'T BOOT ON 865PE NEO2-LS

Hello, I just purchased the MSI 865PE NEO2-LS and an MSI FX5600. I wrote zeros to my hard drive and when I try to boot from the Windows XP CD or floppy this is the result:
"Line 613 of the INF file i386 xtsetup.sif is invalid Setup cannot continue."
Each time I reboot the line number is different (734,575,2983...) I tried two different copies of XP and Red Hat Linux, None would load. Please Help! Any suggestions would be greatly apprieciated. Thank You.
~Trev
P4 2.4c 800FSB
MSI 865PE NEO2-LS
SIMPLETECH 512 DDR333 (x2)
MSI FX5600-VTD256
WD800BB PRIMARY DRIVE
SONY CRX195A1 40/12/48
GENERIC 300 WATT PSU

Change that power supply, cheap 300 watt power supplies arent going to cut it on this board. Try lowering your ram to slow and try installing windows again, that might help.

MS 6728 - 865PE Neo2 LS - UDMA to PIO mode

Hello,
I have very similar probles as allready discussed - that XP automatically swich from UDMA to PIO mode (described on Microsoft webpages - error ID 9; The device, \Device\Ide\IdePort0, did not respond within the timeout period.). But nobody had problem with this chipset... I checked a lot of things: removing IDE drivers from the sytem - reboot. I did replace 80-pin cable for new one. Checked my HDD with utility from the manufacturer.
I have latest Intel chipset drivers 5.0.2.1002 from your website, latest BIOS 1.5
Have you any more ideas?
thanx
MY SYSTEM:
I DON'T USE ANY OVERCLOCKING!
P4 2.56 GHz, FSB 133
Manli GeForce FX 5200 128 MB RAM
512MB VM DDR 400MHz
865PE Neo2 LS
poer supply, don't know, but 300W
Western Digital 80GB, 8mb cache - conected as single
BIOS 1.5 - optimal settings
WinXP + SP1 + all latest Windows Updates

http://users.bigpond.net.au/ninjaduck/itserviceduck/udma_fix/

Need help flashing 865PE Neo2 BIOS

I recently bought a MSI 865PE Neo2-S and it came with the 1.2 Bios, I can't get a good overclock from this bios, and when I use corecenter to raise the FSB to 250 at 5:4 ratio it shows 3000 mhz but I see no changes in WCPUID etc, so I decided to flash to the 1.52 BIOS, i've already got it here but I hear you can use a flasher instead of doing the old floopy, dos thing
I downloaded LiveUpdate3 but it will flash my BIOS to 1.4 and I just want to install 1.52
I did a quick search around the forums and didn't find much about it, any help would be appreciated

First of all I suggest that you install LIVE MONITOR and LIVE UPDATE utilities. Secondly, get yourself a new floppy disk. Allow utility to go online and retrieve updates for your product. After that the utilty will tell you what it found. follow directions to the T and install any NEW DRIVERS BEFORE YOU DO ANY FLASHING!!! Reboot new drivers run utility (LIVE-UPDATE)and choose BOIS and start. I recomend you select DOS option over WINDOWS option FOLLOW DIRECTIONS IT WILL PROMPT YOU.. DO NOT!! REBOOT!! UNTIL PROMPTED!! GOOD LUCK! Sean Reilly875

865PE Neo2-V Conflict, keeps rebooting.....

Similar Messages

Maybe you are looking for