865PENEO2FISR2 – Suddenly its all gone very poorly

Much appreciate any advice here.
Built my PC up about a year ago and apart from minor BIOS teething on first boot-up it has been a dream; never a problem………..until now that is.
Out of the blue, post / boot failed and returned the dreaded BIOS not installed error. Said CMOS had wrong settings – cannot imagine why as I have not been there for a year ! Would not boot at all and kept asking for boot disk. Went into BIOS set-up and it all looked different; even clock / date had reset. Reset defaults and it now limps along – hangs for an age on logo screen + still reports errors errors but at least I can get it to boot. Have reset my SATA controller options as they were (ATA config:SATA only, SATA enabled:yes, PATA enabled: yes, PATA channel: both, RAID:no ............as it was before) but standard CMOS seems different. Think my HDD was previously IDE4 but now seems to be IDE0 plus I am getting an conflict error re IDE settings – how should I set the std CMOS.
Also when I look at select boot device my CD drive (IDE2) does not appear as an option – any ideas ?
This all seems very strange to me - any suggestions on what may have caused this after 12 months of stability ?
PS: Did try the newbie BIOS gde first but did not work – not my day I guess http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433.

Hi,
It's a CR 2032 battery, you require...........
Best bet for good price is Ebay...........as some shops charge really silly money, as it is "a Computer Battery"  I normally buy 5 for £4.00 including P&P........
Bios/Cmos will/should be default and you will have to set.
Del  

Similar Messages

  • After update my iPhone 4 iOS to 4.0.1 my bettery gone so bad. Every 1% goes in every minute while browsing. Also system gone proper slow and 3G conectivity gone very poor. I really want to go back to ios 4.3.4 until these issue is resolved. Please help.

    After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.

    Just look around the forum posts.  Your issue is the number one problem reported by users.  There are many suggestions found, some work for some users, others do not.
    Some users have reported no battery problems after the upgrade.  Others have improved performance after upgrading to 5.0.1 from 5.0.  YMMV.
    Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
    Once you upgrade the iOS on a device, you cannot go back to a previous version.

  • What happened to my music?  I updated to iOs 6 and its all gone.

    What happened to my music?  I updated to iOs 6 and its all gone.  I pay for the iCloud music storage, but I currently have no access to my music.

    iTunes Match was not working after I upgraded to iOS 6.  It was solved by connecting the iPhone to the computer, backing up the iPhone, and then doing a restore to factory settings.  After that everything is working fine.

  • Data is entered in columns A,B,C of excel. Suddenly its all in column A

    My labview application sends my data of force, distance and time to columns a,b and c of excel.  Suddenly it is showing up only in column a seperated by comas.  How can I fix this?

    The IT guy who wrote this program is long gone and I just use the equiment.  I don't have any programing experience with labview although I know enough to be dangerous, which is very little. The program runs a sled with a load cell attached to measure pulling or pushing force. It sends force, distance traveled and time to excel.  The program sends this to columns A, B and C in excel.  I have used this program for several years and it always worked ok.  Just the other day it started to put the data in one column seperated by comas, it never did this before.  I also have 6 labview programs (which must all run through the same main program) and all six have the same data problem and before last week they all worked ok.  No changes were made, at least not knowingly.  I looked at the VI heirarchy but can't identify the portion that writes to excel.
    Cope

  • HT4623 how do i get all my music back i did this and its all gone

    i updated my ipod but all my music is gone now

    Music can be downloaded again for free:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Music is not part of the backup:
    iTunes: About iOS backups

  • HT1904 how do i get all my music back i got a new computrer and its all gone

    i got a new computer and now all my music is gone how do i get it back?

    By restoring it from your backup, redownloading it through the iCloud, migrating it from the old computer, or transferring it from an iPod or similar device.
    (67360)

  • Its all gone! NO! (30 GB Video)

    Oh my god this is so bad! I have the iPod update on manual, so everytime I hook it up (30 GB Video) to my laptop, my music doesnt get erased. But this time, it updated for some reason and everything and I mean EVERYTHING in my iPod got erased! And the wierd thing is that at first everything was there, I even added a new video. But then when I disconnected it and went threw it , everything was gone! But wierd thing is, in iTunes and in my iPod it says I have memory taken up (5.28 GB to be exact). This is weird..what is going on and what can I do? Please someone help me!!

    hey my friend take it easy ok, i know wat u going thru. been there several times. but b4 anything at all sing 4 me. yes i can , yes i can . and be happy dont worry lol.
    ok now let me understand something. ur music on ur computer is not reased right? if it is not erased then u dont have problem. this could be as result of software failure,corrupted software files. or even ipod others.
    anywey watever the problem, u have 2 make sure this is solved if it is software ,do the ipod 5R's. the ipod 5R 's are series of executable steps that will cure most ipod ailments. this can be found at apple.com on e left hand side. please follow the instructions and it might cure de issue.
    1.reset ur ipod
    2.retry new USB port.
    3restart ur computer
    4.reinstall all ur ipod and itunes software.
    5.restore ur ipod.

  • Safari suddenly loading all pages VERY slowly

    [ Edited by Apple Discussions Moderator; Please start a new topic about your technical issue. ]
    Out of the blue, Safari (v2.0.3) has started loading pages extremely slow (between 10 and 30 seconds). I have rest Safari to no avail. I have deleted the icons folder along with the historyplist as well as anothe rplist (I can't remember hich suddenly) as suggested by others on this forum. Still slow. I have shut down and unplugged the mac, unplugged the router and cable modem. Still slow. I have disabled all languages except English. Still slow. I have tested DL and UL speeds. 6099kbps and 350kbps, respectively. I don't know if those speeds are good or not. I don't know what else to do. Any help is greatly appreciated. Thank you.

    Well, instaed of downloading it, you can look in your package receipts and extract the version iof Safari you are currently running with Pacifist.
    Follow the directions and you should be ok, although I don't think there's a whole lot of difference between 2.0.1 and 2.0.3.
    Miriam
    Rev A 20" iMac G5, 15"iMac G4, 15"iMac G3 DVD Mac OS X (10.4.6)

  • Its all gone black

    I was using my powerbook and desk top separately no problems. I left the powerbook open for about an hour maybe less. Then I noticed the screen had gone black I thought it had gone to sleep. Now nothing works, the power light is on but nothing works the screen is black. I have never had any previous problems with the Powerbook any help appreciated.
    Mike

    All sorted silly operator error sorry to bother you
    Mike

  • Its all gone..

    So i was using my Macbook tonight as usual, nothin out of the ordinary, msn working fine, safari working fine. Then out of the blue all of my Desktop icons dissapear apart from the hard-drive.
    I don't know where they are, i can't find them which puts me in trouble as three years of work is on there that i need.
    Help!
    Stuart.

    You might want to consider a backup of your important files so if they do dissapear your covered.
    Mort

  • New Vision Order - Its All gone horribly wrong!

    So I called BT to ask to upgrade to Unlimited Broadband, I have always been thinking about Vision so decided to ask.
    The package that was offered seemes a good deal so I decided to take BT up on Vision as well as upgrading to Unlimited Broadband.
    I received an activation date of 10th August, my box arrived the previous day. Knowing from when I had my Broadband connected it usually is not activated until about midnight that day, so I decided to wait until to day to set-up Vision.
    After following the instructions I was unsuccesful in setting it up, so resorted in calling the helpdesk. I had to call 5 times, I was cut off 4 times!! Finally when I managed ot get a full conversation with someone I was advised that my Broadband Upgrade was delayed so therefore my Vision Activation was delayed.
    The lady kindly called the Engineers to see why it was delayed, she informed me that they advised it is delayed as they cannot upgrade my Broadband to 20MB as the Exchange is not being upgraded until October!!
    Firstly I did not ask to upgrade to 20MB I just wanted Broadband Unlimited, secondly how can they put an order in to upgrade my Broadband to 20MB when the Exchange is incapable, and thirdly when they realised it was delayed, why did they not inform me it was and the reason, instead of me having to call 5 times.
    I now have to wait for them to place another order to fix the mess they created in the first place, I will be checking my Bill carefully when it comes ot ensure they have not started to charge me from the 10th!!
    Well rant over, I hope its worth the wait, or the 10 Days cooling off period will be utilised

    48hrs has now turned it 76hrs!!! This is a disgrace.
    As soon as its switched on Im sending it straight back. BT = **bleep** Terrible.

  • Its all gone wrong since using OC ~Genie 2

    So i installed command centre and enabled OC Genie , it OC me to 4.2Mhz from 3.8Mhz but it increased volts too much so i disabled it and went back to stock. all was fine or so i thought .
    Now the CPU power phase LEDs at top of board right next to power off and Oc Genie buttons flashes - It used to stay a constant blue which looked awesome in the night .
    I have seen in the command centre that i can turn it off completely but even when i do that , on the next reboot of my system it comes back on again .
    Ideally i would like it to stay a constant blue like it used to be , but i will settle for it being off .
    So can anyone help me  ?

    Hi,
    Try >>Clear CMOS Guide<<

  • I lost my entire video. How can i retirieve it? i went back to my project library and it wasnot there anymore. I saved it  in the media browser then when i restarted my computer its all gone. I tried dragging it in dropbox as well but cant find it anymore

    I lost my almost complete video in ivideo after restarting my computer. I saved it under media browser and I can no longer find it. When i went back to m yproject, it was no longer there. Is there a wayi can retireve it or this has been an ongoing problem?

    Eventually found a answer after browsing bunch of other threads
    "To find a Library go to File/Switch to Library and navigate to the appropriate Library. If that does not solve your issue please provide detailed description of your problematic workflow."

  • I made purchases on my iphone then had it replace without transfer and now its all gone what should i do?

    i bought an entire season of scrubs then had my iphone replaced without having the chance to transfer the purchases what should i do?

    Purchase it again.
    In the future, sync the device and transfer purchases more regularly.
    You can also contact iTunes customer support and ask them for the opportunity to redownload the content, but keep in mind they are under no obligation to grant that opportunity.  Video content is single download.

  • Hi since I put the new update on my ipad. The sound quality on the ipad is very poor and just wondering is there going to be a update to sort it out.thanks

    Hi since I put the new update on my ipad. The sound quality on the ipad is gone very poor it's sound very tinny. I just wondering if there is going to be a update to sort it out. Thanks

    Hello Tollykev,
    Thank you for using Apple Support Communities.
    It sounds like you have some audio issues with your iPad after the iOS 7 update.
    I want to recommend the following troubleshooting from the article named:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    Regards,
    Sterling

Maybe you are looking for