8700g not starting and showing only waiting

I changed sim from my BB 8700g and found that my BB is not showing home screen. I have tried everything possible like re inserting battery etc. and now need solution.
can hard reset be of some help and if yes how to do it, where is the hole in the battery area for reset.
Please if anyone can help me.Thanks

Have your tried by changing your current theme?
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • HT201412 my phone restore but does not starts it shows only apple logo please help me

    HI
    My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • VisualRF not starting and showing communication error timeout

    Problem:
    VisualRf is not starting and shows connection timed out on the Airwave GUI.
    If we look at the visualRF logs,  from the location /var/log/visualrf/visualrf.log
    we can see the below error in the log:
    2015-06-14 11:53:29,461 WARN Inventory com.airwave.amp.RoleParserImpl Existing login cookie is null. Initialize amp login. 
    2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl Failed to initialize session cookie. 
    2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl prepareMethod 
    java.lang.Exception: Failed to login.
    Diagnostics:
    When we look at the below error,
    java.lang.Exception: Failed to login.
    We could see that VisualRF is trying to login to Airwave database and failing to login for whatever reason. When we look at the Airwave database for this visualRF user, we could see this below:
    The highlighted username in Yellow is the visualRF, VisaulRF creates this username randomly and we could see that login_attempts for this user is 10 and Airwave disables the user after 10 attempts. Therefore that explains why is_enabled  is 0.
    This could happen for different reasons, when we restore the visualRF backup and backup has some issues or when we do a vrf bootstrap, to do a factory reset on visualRF or could be any other reason.
    Solution
    To resolve this issue, all we need to do is update the Airwave database to enable this user, as shown below:
    [root@localhost mercury]# dbc "update users set is_enabled = 1 where username = 'AihmrH3MHQ';"
    once done, VisualRF would start working normally.

    Got the screenshot, thanks. And hello again Rob
    Follow-up:
    2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
    3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
    4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
    6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
    Thanks,
    Mark

  • I pad not starting and showing linings..

    My i pad is not starting and showing linings of different colours when sleep/ wake button is pressed, then screen goes off . Again pressing sleep button is showing linings again. Holding home button with sleep button is also not solving the problem. I tunes is not downloaded on my ipad. It has been upgraded to
    i OS6.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a problem in iphone 3g which is not starting and showing usb picture and iTunes logo

    i have a problem in iphone which shows a display in which usb and iTunes logo is shown

    Do what the display is telling you to do: connect the iPhone to your syncing computer running iTunes to restore it.

  • Photoshop Elements not loading and shows error

    I have a sony vaio lap with win-8 OS and the PS Elements licensed version came built in and now the thing is my friend has unknowingly uninstalled PS and now i have restored it by running the system restore. But the problem is now it is restored but when i try to start it is not starting and shows an error "PHOTOSHOP ELEMENTS CANNOT START OR CONTINUE BECAUSE OF MISSING FILE(S). PLEASE REISTALL "
    can anyone help me to fix this thing out...........!

    You may need to install the licensing update:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
    If that doesn’t work, try Adobe’s troubleshooting steps, which include reinstalling with all background services including anti-virus disabled (what Adobe calls “simplified mode”) and running as administrator:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Try_Adobe’s_generic
    The Adobe tech note explains how to run in simplified mode.  Note that on Vista, running a program as administrator is different than running it from an administrator account – the tech note explains how to do that.

  • TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

    i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

    That number is for an apple server in the UK that is used for iMessage activation.  A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number.  I suggest you turn iMessage off.  In settings/phone turn on dial assist.  Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage.  Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

  • How to reset all setting on my iphone 4s? when i have done procedure for reseting my screen has gone and showing only apple logo and i taking very long time i cant off or on?

    i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/

    try holding the home and power buttons at the same time for about a minute!

  • Firefox will not start and profile manager will not start

    This has happened on two accounts on my laptop. I am running windows 7, 64 bit and firefox 18.0. Firefox had been running on this machine for several years without incident, but suddenly when I try to start firefox, it will not start. The little wait icon spins for about a second then disappears without starting firefox. Other browser will start and run. I reboot and when I click on the icon to start firefox nothing happens. I tried to start the profile manager as seen in the knowledge base, but nothing starts either. I switched to another account on this computer and firefox started and ran for about a week, until today where it just stopped working. I have not tried to reinstall firefox as the message boards say this will not help. Any ideas?

    Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

  • My ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

    my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

    Have you tried a reset first? If it works, you won't have to go through the restore process.
    Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
    If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
    Hope this helps.

  • Garageband does not start and I get this open and do not shut down or restart

    garageband does not start and I get this open and do not shut down or restart

    Such an error is always caused by inconsistent files in the Firefox program folder (application.ini and/or platform.ini and possibly others) and your only option is to reinstall that version of Firefox, either via the software repositories or the Mozilla server.<br />
    Be sure to delete all files in that folder before copying the files from that tar.bz2 archive.<
    *http://kb.mozillazine.org/Installing_Firefox#Linux
    Note that the current ESR version is 10.0.5
    *http://www.mozilla.org/en-US/firefox/organizations/all.html
    *http://www.mozilla.org/en-US/firefox/17.0.5/releasenotes/
    *http://www.mozilla.org/en-US/firefox/17.0.5/system-requirements/
    All Firefox releases:
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ (17.0.5esr/, latest-esr/, latest/)

  • SAP MMC does not start and red in color

    Hi Gurus,
    We are in a process of installing EhP4 and there were lots of errors. We reverted back to old version.
    After moving back to old state i.e., EhP3, system does not start.
    1. SAPosCol does not start acutomatically in the service
    2. sapmmc does not show database details
    3. When I try to start the server through SAPMMC, all esmart03 0, esmart03 1 turns to red.
    Please let me know how i can fix this problem.
    I want to post screen shot, but i am not sure how i can post the same here.
    Thanks in advance.
    Regards
    Shreeshail

    Thanks Sunny for your reply.
    We had taken system system backup (complete "E" drive) where SAP server is installed. I had to stop EhP4 process as we got a requirement to bringup NWBC.
    We restored the "E" drive content and then restarted the SAP server.
    After that servies did not start and MMC does not show up Database details.
    Do i need to create services and MMC to fix the issues??
    Thanks in advance.
    Regards
    Shreeshail

  • HT1766 sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant

    sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...

    See Here...
    iOS: Not responding or does not turn on
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • HT201412 MY IPHONE NOT DISPLAY IT SHOWS ONLY APPLE SIGN

    my iphone is not responding its shows only apple logo on the homescreen

    Press the HOME button and power button at the same time and do not release them until the screen goes black and the Apple logo reappears.  This should restart your phone.

  • Can i delete app which is publish and showing us waiting for review in itunesconnectcan i delete app which is publish and showing us waiting for review in itunesconnectcan i delete app which is publish and showing us waiting for review in itunesconnect

    can i delete app which is publish and showing us waiting for review in itunesconnect ?

    Hello Nicke,
    Thank you for your response.
    I have enabled the Analyctic and Debug log for the Management and Publishing server and let it run for 30min.
    The debug log only shows 1 error when I used iisreset telling me the management server is unavailable (which it indeed was for a brief second). Otherwise it is completely empty.
    The analyctic log show the following when I refresh my packages on the client (but don't see any errors in it).
    Handle refresh request
    Get entitled package list
    Get user group list
    Get user group list
    Get entitled package list
    Write package list to XML
    Write package list to XML
    Handle refresh request
    Especially the write package list to XML looks interesting, but in the details I don't see anything special/wrong:
    The analytic log for the management server only shows Get Publishing Metadata every 5 seconds (The time which the xml files should be refreshed).

Maybe you are looking for