8700r not supported by Desktop manager

i decided to use my "old" 8700r and want to synchronize my ical and address book from my Imac (10.6.8) and desktop manager keeps telling me it cannot support the connected device. I've tried downloading the oldest version of DM and the newest and i still have the same problem. My Imac does see the 8700r when connected. I'm trying to install the latest 8700r software and hopefully this helps but it should of still connected to my 8700r with the older software. Any suggestions ? Thx

sluggomagoo wrote:
Memorex 16x 4.7GB 120min.
Philips 16x 4.7GB 120min. 
Hi,
They look the same, feel like the same BUT physically they are not the same specially the chemical which covers the surfaces of the dics. This is something to do with the ODD, not the software. I would not continue to create recovery set with those disc's.
Regards 
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • BB 8330 Curve will not sync with Desktop Manager (Media Portion)

    The BB Desktop Manager software will not let me use the Media portion of the software.  I have enabled the media card option on my BB and I have also enabled "Mass Storage" on my phone.  Why can't I get my BB to sync with the software?

    Hi ripkin1981,
    Welcome to BlackBerry Support Community Forums.
    What version of BlackBerry Desktop Manager are you using? What happens when you try to sync media? Do you receive an error message?
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Reconcile email messages option not available in Desktop Manager

    I recently installed the Desktop Manager in an attempt to sync my new Tour with Outlook 07. After going through the install process, I went to the Synchronize option in the desktop manager and the reconcile email messages option is greyed out. I have a home office and do not have a BB Enterprise Server.  In fact, there is not even an Email Settings icon available to me in the Main Menu of the desktop manager.  Any thoughts on how to enable this option? Thanks

    That function is not available on a personal BIS account.
    You'll need a BES account for email and messages reconcile, to Outlook.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 8900 Not Connecting to Desktop Manager in Boot Camp

    Hi all
    I have a problem in Boot Camp (XP Pro) on my new MacBook Pro. My 8900 shows up perfectly in device manager and I can also browse the media card. When I run Desktop Manager 4.7, it cannot pick up the BlackBerry and it shows as Disconnected. I have tried re-installing Desktop Manager and even tried the latest unreleased version 5.0. Browsing other forums have suggested I take the battery out for a minute and try again and this didn't work either. 
    I have tried going back to DM 4.7, re-installed Bootcamp 2.1 drivers and installed VMWare Fusion. Nothing gets it connected, yet every time the 8900 shows up perfectly in Device Manager.
    I installed on my partners HP laptop and it connected immediately in DM. I really need this to work on my Mac (boot camp preferably) and i simply cannot understand why its not working.
    Please help me! What am I doing wrong? I've been trying for hours and so frustrated!
    Thanks in advance...
    Rich

    Hi all
    I have a problem in Boot Camp (XP Pro) on my new MacBook Pro. My 8900 shows up perfectly in device manager and I can also browse the media card. When I run Desktop Manager 4.7, it cannot pick up the BlackBerry and it shows as Disconnected. I have tried re-installing Desktop Manager and even tried the latest unreleased version 5.0. Browsing other forums have suggested I take the battery out for a minute and try again and this didn't work either. 
    I have tried going back to DM 4.7, re-installed Bootcamp 2.1 drivers and installed VMWare Fusion. Nothing gets it connected, yet every time the 8900 shows up perfectly in Device Manager.
    I installed on my partners HP laptop and it connected immediately in DM. I really need this to work on my Mac (boot camp preferably) and i simply cannot understand why its not working.
    Please help me! What am I doing wrong? I've been trying for hours and so frustrated!
    Thanks in advance...
    Rich

  • BlackBerry 10 support for desktop manager ASAP!!!

    Hi. My work just upgraded my phone and to the 4G EE network two weeks ago and initially got a Nokia limit (as they BBC10 hadn't launched) but as windows phone 8 didn't support outlook sync and I've been a loyal blackberry user for years, we sent the last phone back as I knew the new blackberry 10 was coming out and loved desktop manager for its usability with outlook so I assumed I would be able to sync my work contacts with the new blackberry Z10. 
    How utterly disjointed that blackberry 10 doesn't support desktop manager and blackberry link does sync with outlook. The old Research in Motion would never have wanted to alienate their loyal followers. But this is the new Blackberry. Microsoft did the same thing when they stopped supporting activsync on windows phone with their own software but I never thought blackberry would follow them. 
    Will desktop manager be upgraded soon to blackberry 10 or shall I send my new Z10 back along with WP8 and get an I Phone or Android device!
    I can't believe I demanded the new blackberry now! 

    Your right!!
    Blackberry should just shut the door and turn the lights out, the lack of ability to sync with outlook is the last straw. My Z10 arrives in 3 hours and isn't even going to be unwrapped and is going straight back. I'll keep my 9800 till it dies and then get something else, why should anyone of us as customers accept a backward step..

  • Curve 8330 will not sync with desktop manager after 4.5 OS upgrade

    Last time I connected to the desktop manager, it asked me to upgrade to 4.5. I thought, why not? So I did. Since then, I can no longer use the Google Sync for calendar and contacts as it stopped working immedately afterwards.
    I realized I need to get my contacts updated on my phone, and my calendar corrected so I tried to sync to the desktop.
    The phone is no longer being recognized by the system. This is since the updated. I have downloaded the USB / Modem drivers again but haven't installed / reinstalled them yet.
    I was hoping it was maybe a simple fix?
    I'm running Win XP Professional SP 3. I am using 4.7 of the Desktop manager. (Worked fine before OS upgrade)
    If I haven't given enough details to help, please let me know.
    Thanks!

    natattack06 yes it should also help you as well.... basically any 5xx error
     gallhiser you should still try repairing yours, might be able to sell it and make back some money

  • Why Bluetooth not enabling on desktop manager 4.7

    Hi!!!
    I've been trying to connect my BB Bold to my computer thru bluetooth connection but when I go to the connections options on Desktop Manager 4.7 it does not allows for the bluetooth connection. I'm using a Zoom USB bluetooth device and my OS is Vista 64. 
    I installed the bluetooth device using my Toshiba laptop software.
     Thanksin advance for your help!

    Hello abedauhajre,
    Bluetooth pairing with Desktop Manager 4.7 requires the use of Windows Bluetooth drivers. Most Toshiba laptops use their own set of Bluetooth driver which I have seen as an issue in the past.
    You might find this KB of use:
    How to set up Bluetooth connectivity with BlackBerry Desktop Manager
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Curve not recognized by Desktop Manager

    I am running Windows XP and using a Curve 8330.  I originally installed and was successfully using version 4.7 of Desktop Manager via a USB port.  About two weeks ago, when I plugged in the Curve Desktop Manager indicated it wasn't connected.  I have searched this site and tried many of the suggested fixes.  I've done a hard reset on the device.  I have done a clean uninstall of the software numerous times.  I've reinstalled version 4.7 and tried connecting wit no success.   I've installed version 5.0 and tried connecting with no success.
    I've noted that many of the suggestions listed in this forum suggest clicking on various items within Desktop Manager that are non-existant in all versions that I've downloaded and installed.
    I would appreciate any and all suggestions.  This is maddening!
    Solved!
    Go to Solution.

    Kelbethor,
    Could you please provide more detail so I can try your solution?
    Valdeck,
    I have no idea what BBSAK or JL_Cmdr is/are so I don't know where to go with your comments.
    In either case Desktop Manager is still not communicating with the Blackberry.  I've done a clean uninstall and reinstalling DM 5.0.  I've done a hard reset on the BB and I still can't get it to work.
    When I look in Device Manager at "Ports (COM & LPT)" I see "RIM Virtual Serial Port v2 (COM4))" and "RIM Virtual Serial Port v2 (COM5))"
    When I look at Universal Serial Bus Controllers I don't see any that appear to be associated with RIM.  There are 3 Intel USB Universal Host Controllers, 4 USB Root Hubs, a Generic USB Hub and an Intel 2.0 Enhanced Host Controller.
    Any ideas?
    Message Edited by skylittle on 10-05-2009 10:48 AM

  • Address Book Syncrhoniz​ation not available in Desktop Manager

    Hi all;
    I'm a complete noivce BB user, so apologies if this is an obvious question.
    I've synced my Bold's Address Book with my Address Book on my Mac and home and now would like to sync my work contacts through Outlook. However, when I attempt to use the Desktop Manager to do so. There is no option for the Address Book (just Calendar, Addins, tasks and memos).
    Any thoughts?
    Many thanks in advance...
    Doug

    Is the Address Book option missing or grayed out? I'm not sure why you're seeing add-ins in the list. In the list with 4 checkboxes there should only be Address Book, Calendar, Memos, Tasks.
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Do not want blackberry desktop manager to start when turning on computer

    I installed Blackberry Desktop manager and I cannot force quit. I shut down my Mac and it comes back and cannot close it or force quit.

    Does this help?  i don't know macs well, but looked around:
    http://www.ehow.com/how_4501754_remove-start_up-applications-os-leopard.html
    I'm hoping the entry for the blackberry program is there.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • TypeLoadException: "Types from custom Windows Runtime components are not supported in desktop applications"

    When trying to use a custom Windows Runtime component in a desktop application, a TypeLoadException is thrown.
    Why aren't custom Windows Runtime components supported in desktop applications? Is this something that will change in the future?
    Thanks,
    Tom
    luck favours the prepared

    If you are targeting the .NET Framework 4.5 you could try to add a <PropertyGroup> element to your project file and a reference to the WinMD file as described here:
    http://stackoverflow.com/questions/12136585/using-custom-windows-runtime-components-in-non-metro-applications
    Thefull list of the WinRT classes that are available to desktop apps is available here:
    http://msdn.microsoft.com/en-us/library/windows/desktop/hh920511%28v=vs.85%29.aspx#windows_runtime_classes
    Please refer to the following links for more information:
    http://msdn.microsoft.com/en-us/magazine/jj651570.aspx
    http://stackoverflow.com/questions/12745703/how-can-i-use-the-windows-ui-namespace-from-a-regular-non-store-win32-net-app
    https://software.intel.com/en-us/articles/using-winrt-apis-from-desktop-applications
    Please remember to mark helpful posts as answer and/or helpful.

  • Curve 8330 is not recognized by Desktop Manager.... Please help.

    I brought home my 8330 and downloaded the Desktop manager (v4.7).  After many attempts for my phone to show that the USB was staying connected, my Desktop Manager still refuses to recongize that my phone is connected.  I am lost as to what to do next.  I have had v4.5 and then tried v4.7.  Can anyone offer and help/suggestions?
    Sprint Curve 8330 v4.3.0.127, Platform 3.1.0.73
    Windows Vista
    Desktop Manager v4.7
    Thanks,
    Tim
    Message Edited by murf3030 on 01-13-2009 01:55 AM

    After opening BlackBerry Desktop Manager and connect your device. In
    Desktop Manager click on Option -> Connection Option can you find 
    your device with PIN no.?
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • 9360 not connecting to Desktop Manager

    Does anyone have a link to the older version of blackberry desktop manager?
    Solved!
    Go to Solution.

    Hello JenniiYiadom
    Welcome to the Community
    You can Download from here Archived RIM Desktop Software .
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Folio error-stacks not supported on desktop

    Hello,
    A friend of mine and I are working on a digital publishing folio on separate machines. When she tried to preview the folio in the preview button of the folio panel that takes her to the Adobe Content Viewer, it gave her the following error: "This folio contains one or more stacks that are not yet supported in Content Viewer for the Desktop. PDF stacks are only supported on iOS viewers." I dont have that issue, I can view it just fine through the preview button and don't have any type of errors.

    If you preview on the desktop from the folio builder panel it will attempt to show you the entire folio where if you check from the folio overlays panel, it will show you only the article you're working on and will rasterize it even if you've selected PDF for the folio.
    Bob

  • Can not upgrade to desktop manager 5.0 in Vista

    Frustrated- trying to delete 4.7 (not working) and do fresh install of 5.0  -  get registry error when uninstall tries to delete certain obscure entries
    with 1405 error code - do not have permission to delete key etc.  - I am running as administrator - I have tried  regedit to check permissions and change etc. but there are too many entries - I searched for solutions and have tried everything including Microsofts enhanced remove program (Windows Install Clean Up) 
    Thanks for any help!
    Jay 

     By using the Windows Install Cleanup Utility, you are removing all the registry keys.
    Can you install 5.0 on top of 4.7? You should be able to do this.
    If I helped you please give me Kudos!!

Maybe you are looking for

  • Get data in editable ALV back to internal table without data_changed ev?

    Hi,    I have an editable ALV using classes to whch I have users the option to edit directly on the screen or upload data from an excel. The event data_changed gets triggered when users edit the table on the screen. However when EXCEL is uploaded, I

  • Ipod Driver Install on Vista

    I know that Itunes does not officially support Vista at the current time, but I am having a problem getting Vista to even recognize my iPod... I have a 4th generation iPod, and when I try to install the drivers from the CD the installer minimizes to

  • New iPod Nano isn't being recognized, with "Use iTunes to restore"

    I got this new Nano yesterday and I took it out the box, tried it for a while, etc. I then installed iTunes 9 and after that everything was fine, so I plugged it in, hoping to sync it with my library and charge it. It did both for a while. Unfortunat

  • Not waking up with external display in closed clamshell mode.

    Hello all! I have the newest Macbook (late 2009), and have had it docked in a BookArc using an external display, keyboard and mouse. Everything has been working perfectly since I got it a couple months ago. I've traveled with the Macbook and redocked

  • DMEE - Error with event 25 open/close file

    Hi All, I have created a new format in DMEE (and in the customizing), I generate a flat file with F110. I have created an event 00 and 25 to have a new file when the Bill of Exchange Due Date (FPAYH-WEFAE) changed. In the DMEE, at header level, in th