8703E - Message status shows 2 messages unread

On my 8703E the message status icon in the top left hand corner shows 2 messages as unread. In Outlook and on the device in messages all messages have been opened and read.

The first thing you can try is a hard reset: remove the battery from the device (while still powered on) for 30 seconds, then reinsert. If that doesn't work then try checking every message folder you have.

Similar Messages

IPad mail shows too many unread messages

iOS 7.1.2(11D257)
iPad model MC733LL/A
The mail icon in the iPad dock shows 2,685 unread messages, in spite of the fact that all messages have been deleted from within mail. When you open Mail, the offending In Box shows the same number. Looking in that mailbox, it says No Mail in the middle of the sidebar, but at the bottom it says "Updated Just Now, 2,685 Unread".
No iCloud or synching is involved.
I have already rebooted, to no avail.
Is there some way to force a re-download of Mail?

Yes, we tried that already, didn't work. We are lugging the whole iMac to the Genius Bar today, blech.

Trying to load photos off a SD Card and I get an error message "Unreadable files: 185.

Question-- Trying to load photos off a SD card and I get an error message "Unreadable files: 185"
Also an error message previously "Your start up disk is almost full . Where do I go to delete some files?

How big is your HD? How much free space on it?

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

Here's a test you can run:
1 - copy a set of photos from the disk to a folder on the desktop.
2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
3 - select the files in the folder and drag and drop onto the workflow app.
4 - try to import the resulting files.
OT

With Microsoft exchange server, leave messages UNREAD even if read on blackberry?

We are having issues that seems complicated but I'm sure there's a solution..
Sometime while at a restaurant or waiting for a light, I get a message on the blackberry but I can't fix the problem right a way or it can wait until I'm back at the office to be fixed, now when I get back to the office, I open Microsoft outlook 2003, (running off Microsoft exchange server) the message downloads into my inbox, but tagged as read.
Here is my question:
If I read a message on my blackberry, how do I leave the message unread on the exchange server? I have the MIKE (Telus) or Nextel if you prefer 8350i but I also have 9 other blackberry curve 8330 with the same problem.
Is there a way , an option leave unread on the server until downloaded to INBOX?
Any help would be appreciated.
Alain

is this via BIS or BES?
If you disable reconcile on BES you can achive what you want.
Messages Options - Email reconciliation -
wireless reconcile = no
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue.

You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
myc680.local> version
Current Version
===============
UDI: C680 V FCH1611V0B2
Name: C680
Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
Model: C680
Version: 8.5.6-074
Build Date: 2014-07-21
Install Date: 2014-07-29 11:16:34
Serial #: xxx-yyy1611Vzzz
BIOS: C240M3.1.4.5.2.STBU
RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
RAID Status: Optimal
RAID Type: 10
BMC: 1.05
There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID. You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
myc170.local> version
Current Version
===============
UDI: C170 V01 FCH1428V06A
Name: C170
Description: Cisco IronPort C170
Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
Model: C170
Version: 7.6.3-019
Build Date: 2013-06-09
Install Date: 2014-09-12 13:52:24
Serial #: xxxxxxD87B39-yyyyyy8V06A
BIOS: 9B1C115A
RAID: 02
RAID Status: READY
RAID Type: 1
BMC: 2.01

Query is running but status shows INACTIVE

Hi All,
I am running one query and is still running but when i checked v$session the status shows INACTIVE since long time..
Can somebody please help me to understand why the status is INACTIVE even if the query is running.. Is my session waiting for some resources?
Also i checked v$session_wait it shows "SQL*Net message from client"
Oracle version 9.2.0.7.0
OS : SunOS 5.10
Module : Sql*Plus
Any help is greatly appreciated.
-Harsh

Thanks much for your reply Mark.
This session i myself running from sqlplus and its still running.
Also here's my session info
select SID, STATUS, program, module, last_call_et from v$session where SID=78;
SID STATUS PROGRAM MODULE LAST_CALL_ET
78 INACTIVE sqlplus.exe SQL*PLUS 0
I checked the locks too there is no blocking or blocked sessions using following.
select /*+ RULE */ a.session_id, s.serial#, s.username, s.status
from dba_locks a, v$session s
where a.blocking_others = 'Blocking'
and a.session_id = s.sid
order by 1;
Now under v$session_wait my session 78 is showing wait as 'db file sequential read'
So is my session now waiting for resources? Can you please help me how to find that my query has enough resources or if not does my session is under wait.
Thanks
-Harsh

Sent mail showing up as Unread; multiple Drafts that don't auto-delete

I found an old 2008 thread that describes this pretty well: http://discussions.apple.com/thread.jspa?threadID=1372415&start=15&tstart=0
We're running Leopard 10.5.8, and the mail account is IMAP (not mac.com or gmail or fusemail, but our business mail hosted on a Verio server.) Recently, messages being composed and automatically saved as a Draft (which I know is normal) got multiple draft copies which do not auto-delete when the message is sent. Also, some messages in the Sent box show up as unread.
I think we've got Drafts set to save to the server. But it's worked fine up until just recently.

Also, is there a way for me to create/import my mail folders in the iPhone? Before when it was a yahoo account (rather than a POP) I could create folders in the yahoo webmail interface and they would show up, but that's not the case with a POP account.
Or what about IMAP? I think Yahoo Plus supports IMAP now, how would that work with Mac Mail?
Thanks.
Message was edited by: Slapshot Scott

IPhone 4s Mail shows over 5000 unread emails, but only 4 show up in Inbox

On my wife's iPhone 4s, running the latest iOS, Mail shows over 5000 unread messages, but there are actually only 4 in the Inbox. Anyone out there who has experienced this and have a fix?

You need to log into your email on a browser and delete them from there.

Clq status shows quorum server offline even though the clq service is runni

Hi,
In a 2 Node + 1 QS sun cluster 3.2 cluster, clq status is showing quorum sever offline even though the clq process is running on the quorum server. to make the quorum server online, i have to either remove and add the quorum server from cluster, or incase if there is a failure on any one of the node's both th nodes will reboot and once both joined to the cluster, I can see clq status showing quorum server online!!!
Why is the quorum server going offline automatically?
Any help would be highly appreciated
Many thanks in advance
Ushas Symon

Hi,
I asssume you mean the scqsd process is running on the QS, right?
A QS is shown as offline, it the monitor could not reach it when it last tried. This is usually due to a networking problem.
If you issue a clq status, the monitor checks again and if it can reach the QS will change its status back to online.
If this does not happen, check your logs, what kind of error message showed up.
Does clqs show on the QS show the correct information?
It is obvious, that if a node dies and the QS has been offline prior to the node death, that the other node will die as well due to lack of quorum, i.e. it has less votes than needed. You seem to have a basic networking problem or something is really wrong with your QS.
Regards
Hartmut

Rcgrpwise status shows status as 'unused"

I have one 2014 system running a GroupWise 2014 POA agent where the agent starts on, but reports as unused.
I've read the tids and this one has me stumped.
Any suggestions?
Symptoms:
The agent "does" start.
The pid file is not created for the POA agent.
rcgrpwise status shows agent as unused.
rcgrpwise stop does not stop the POA agent.
The system has been rebooted and the symptom persists.
Running Gw2014 on SUSE Linux Enterprise Server 11 (x86_64), VERSION = 11 PATCHLEVEL = 3
gwha.conf
; * GroupWise gwha configuration file created Fri Apr 18 16:08:29 CDT 2014
[gwha]
ssl=no
key=
cert=
password=
[lwpo60day.lwdom]
server=/opt/novell/groupwise/agents/bin/gwpoa
command=/etc/init.d/grpwise
startup=/mnt/mail/lwpo60day/lwpo60day.poa
delay=2
wait=60

bbecken,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Service Pack Update Upgrade Status showing failed

I have SharePoint 2010 Server. I upgraded the same to SP2. In upgrade status it shows failed but once I run command
(get-spserver $env:computername).NeedsUpgrade.
It shows false. How to check if patch is successful?
Please remember to mark the replies as answers or vote as helpful if they help.

Hi,
From your description, my understanding is that upgrade status shows failed when you upgrade SharePoint, but when you run PowerShell Command, it shows “false”.
Have you run the SharePoint Configuration wizard again after the status shows failed, then check if it will show successful status?
As upgrade status is failed, you should check if there are some error message in your USL log.
In addition, you could check the version of SharePoint if it is upgraded to the correct version number.
Best Regards
Vincent Han
TechNet Community Support

Purchase Order has approved but Status show as Unapproved

Dear All Experts,
I have a Purchase Order need to go throught approval procedure. The Purchase Order has approved by user and add into system and printed out. When second time, open the same Purchase Order, the status show "Unapproved" but the Purchase Order windows header name show Purchase Order [Approved], this make user unable to copy to GRPO. I have try to restore stored procedures in SAP B1, it does not make any changes. The user is using SAP B1 2007A SP0 PL49. Please Advise.

Hi Angie
the purchase order once approved has to be added on to the system after approval if u say that u have added the purchase order after it got approved then that seems to be a concern for that u need to contact ur sap partner or if u are a partner then u need to get in touch with sap to resolve the isssue as it could be because of problem with ur database
but before that please be sure off that u are using the correct way and have sucessfully added the documnt apon approval.
Regards,
Manish

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

Is there a way to have your email on the phone coordinate with the email on your computer? When I delete emails on my computer they still show up as unread on my iphone.

Is there a way to coordinate email on your computer and on your iphone? When I delete email on my computer it still shows up as unread on my phone.

It depends on the type of email account you are using, POP3 or IMAP. This article explains the differences: http://mail2web.com/blog/2010/02/pop-imap-difference/

Sales Order Status showing Being Processed

Hi All ,
I my client created sales order with 100000.700 ton and with 42 Piratical delivery document with different dates and 42 billing document and clear accounting documents
But the problem is Sales order status showing as Being Processed
I check all delivery documents if was showing total quantity delivers and i check copy controls OR to ZLF Updated document flow is there
and i Item category TAN don't not having completion rule
My question is it is mandatory to maintain Completion rule in item category
The Problem With Only One sales order it showing Being Processed, rest of sales document Showing completed
Do we need to Updated Status manually ?
Can any one guide me what could be a Problem
Thanks
Rajesh

Hi,
GO TO VA02 THEN SELECT THE ITEM THEN GO TO SCHEDULE LINE -> STATUS TAB-> GIVE THE REASON FOR REJECTION
Regards,
T.Murugu

8703E - Message status shows 2 messages unread

Similar Messages

Maybe you are looking for