870A Fuzion AMD 770 ram 1600mhz (non oc)..HELP..!!

hi there,,wanna ask about my board 870a fuzion amd,,caanot archive speed 1600mhz if i use it ,only detect 667mhz only..,but the spec say this board only use 1333mhz is the maximum but can oc to 1600mhz..........im using crucial ballistix tracer 1600 ram...please helpp.....someone...

You might be able to get the ram to run at 1600 by doing the following: go into bios(pres "delete" key when booting) got to "cell menu"
go to "FSB/DRAM RATIO", Set to "1:4". You might have to change timings to crucial specs. save and exit. That SHOULD bring you ram to 1600.
Bas is right that current AMD chips do not NATIVELY support ram speeds over 1333, which IS overclocking. I have my supertalent 1333 ram at 1600 with NO issues at all. your milage may vary. You should also post your system specs like in our sigs below our posts. VERRY IMPORTANT. See posting guides please.

Similar Messages

MOVED: 870A Fuzion AMD 770 ram 1600mhz (non oc)..HELP..!!

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=149003.0

You might be able to get the ram to run at 1600 by doing the following: go into bios(pres "delete" key when booting) got to "cell menu"
go to "FSB/DRAM RATIO", Set to "1:4". You might have to change timings to crucial specs. save and exit. That SHOULD bring you ram to 1600.
Bas is right that current AMD chips do not NATIVELY support ram speeds over 1333, which IS overclocking. I have my supertalent 1333 ram at 1600 with NO issues at all. your milage may vary. You should also post your system specs like in our sigs below our posts. VERRY IMPORTANT. See posting guides please.

MOVED: 1055t and a MSI 870A Fuzion AMD 770

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=142419.0

You are trying to run XMP profile memory which is meant for Intel systems and not AMD. Courtesy of Hardware Canucks, the explanation is a s follows:
Quote
By now, we should all be used to Intel’s Extreme Memory Profiles (XMP) which basically sets aside a pre-selected space within memory modules for specific SPD profiles. This benefits everyone from overclockers to novices as it gives them pre-defined values for specific usage scenarios.
Following in Intel’s footsteps, AMD has now introduced Black Edition Memory Profiles or BEMP. While BEMP certainly doesn’t have a particularly sexy ring to it like XMP, its functionality is virtually the same and can be controlled directly by the user. One of the main differences between XMP and BEMP is the way profiles are stored; XMP uses a portion of unallocated space within the modules themselves, AMD’s solution uses online profiles for the memory. This allows for the memory manufacturers to add additional profiles once their products have shipped but it also means BEMP is tied at the hip to AMD’s Windows-specific Overdrive utility. Once set up properly, these memory modules will effectively increase memory frequency, lower timings and bump the Northbridge frequency for additional performance.
You can try and manually find memory settings that will work, but I shall refrain from guaranteeing stability.
For a start I would use only one module and set the DRAM ratio manually so that your mem runs at 1066. Suggested timings as per the JEDEC#2, i.e 8.8.8.22. You should be OK with the CR at 1 at 1066 but you may have to change that to 2. Start your OC attempts from there and let the mem gradually increase as you increase your FSB/HTlink. Once your mem gets closer to 1333 change the timings to 9.9.9.24 as per JEDEC#3. You can also use those timings right from the start to avoid any instabilities as the DRAM freq increases from 1066 to 1333.

MacBook Pro 16GB RAM 1600Mhz

Hi, I have a 13" late 2011 @ 2,4GHz i5 and I have bought 16GB RAM @1600Mhz.
I was wonderring if the 1600MHz RAM would work because I've seen people with it working just fine. Now I'm asking this because if I just spend 150 bucks for nothing I'll be p*ssed! And don't forget my MBP is a 13 inch not a 15!!
Thanks,
Thomas

There are 2 different voltage for DDR3 now on Macbooks.
DDR3 (L) for 2012 Macbooks 1600MHz 1.3 - 1.35 Volts.
DDR3 for 2011 Macbooks 1333Mhz 1.5 Volts.
If you've purchased the 1600MHz 1.3 - 1.35Volts and are using it in your 2011 Macbook, the chances of it working are close to none.
If however, you bought the 1.5 volt version of the 1600MHz, it might or might not work with your Macbook, some people might have had success on using them in their Macbook. But that doesn't mean that it would work with your Macbook. Unless you bought the same brand and model as the others who had them working in theirs.
In any event, why not just return it and get the right one? Most resellers might not accept returns but I'm sure they'll do an exchange since you'be got the wrong RAM.

Using 870A Fuzion With New & Old Graphics Cards

Hello I am planning to assemble a new PC using the MSI 870A Fuzion.
All parts will be new most specially the graphics card.
PowerColor Go! Green HD5750 1GB GDDR5
I want to pair this with my old XFX 8500GT Fatal1ty Edition.
Will this setup be possible?
Thank you for your insights.

MSI does say here:
http://eu.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2105
Quote
MSI Fuzion Technology
* Powered by MSI Fuzion Technology, MSI Fuzion Series MBs offer Non-Identical & Cross-Vender Multi-GPU Processing; which allows users to install any 2 different level and brand graphics cards in a single system. The technology can perform scalable rendering to deliver near-linear gaming performance by load-balancing graphics processing tasks.

870a fuzion sli?

Hi,
Ive read on several sites that the new 870A Fuzion Power Edition can handle SLI.
But on the MSi webpage it says "Y" to crossfire and "N/A" to SLI.
So can someone please answer what to believe?
If i buy that motherboard, will it handle geforce graphic cards and the possibiliy to SLI connect them?
Or is that motherboard locked to radeon graphic cards?

Hi,
the AMD 870A Chipset does not natively support SLI, however, the whole point of the "Fuzion" Technology is to enable every(!) type of multi-GPU configurations (including ATI+ATI, NVIDIA+NVIDIA, ATI+NVIDIA & NVIDIA + ATI). Linking two NVIDIA Cards via the Fuzion Technology (Lucid® LT22102 Chipset) is not the same as SLI in the strict sense, but it will have the same effect.

It's upgrade time..... 870A-G54 need budget RAM advice

My Neo4 Platinum SLI board recently died. (Yes, it's been kicking good all this thing.. )
Counting how well my previous MSI board did, I have been leaning towards another MSI board. And lo and behold, some research led me to the 870A-G54 board.
To make sure I dot my I's and cross my T's, I wanted to ask you folks two questions....
1) My power supply is an OCZ Modstream 520w. With a Phenom II X2 550 running stock, should this be fine?
2) What would be the best ideal budget RAM to get? I want to start with 2 Gig. I plan on adding more later.
See, I am able to spend around $250ish for this upgrade.
Any help would be totally appreciated!! Thanks!

Quote from: Mark on 14-June-10, 00:26:24
The second one you linked to is DDR2 and the board only supports DDR3.
I've heard AMD chipsets can be picky about RAM and that it's best to get RAM with looser timings or AMD approved RAM. I would say this would be a safer bet in terms of compatibility: http://www.newegg.com/Product/Product.aspx?Item=N82E16820148194
That's not to say the RAM you have linked to won't work; I'm just trying to help you select something that won't present any issues.
And of all those I listed I was not stuck on one or the other.
At this point I am about less muss, less fuss. I appreciate the insight and thank you for the tips.
I think I have all the parts picked out. I will drop an update once it is built and resurrected.
Thanks!!

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

HD6870 No signal on My 870a fuzion

hi..i`ve just bought sapphire HD6870 1Gb DDR5 from my friend to replace my old HIS 4850...but after i installed it on my MSI 870A FUZION, 6gb corsair memory, TX750M CORSAIR PSU..then turn pc on It`s sound 1 long beep and 2 short beep..it didn`t display anything on my BENQ 22" LED monitor when i saw on my LED it`s witten "NO SIGNAL" ...but when i tried using old 4850 it work smoothly without any problem..anyone can help me how to fix it ??? is it PSU, BIOS, or MEMORY issues ??

Quote from: Witkizz on 10-July-12, 02:19:15
hi..i`ve just bought sapphire HD6870 1Gb DDR5 from my friend to replace my old HIS 4850...but after i installed it on my MSI 870A FUZION, 6gb corsair memory, TX750M CORSAIR PSU..then turn pc on It`s sound 1 long beep and 2 short beep..it didn`t display anything on my BENQ 22" LED monitor when i saw on my LED it`s witten "NO SIGNAL" ...but when i tried using old 4850 it work smoothly without any problem..anyone can help me how to fix it ??? is it PSU, BIOS, or MEMORY issues ??
i wouldnt suspect the PSU at all as Corsair units are good and has more then enougth power for the Graphics Card!
could be bios related! as a test install the HD4850 and enter bios and load optimized defaults and save setting and exit! turn the computer off and put the HD 6870 back in! that might fix it?
also test the card in another system as it may be just a faulty Graphics card!

Mac pro put in new ram now none of the ram works

mac pro put in new ram now none of the ram works
it just hangs on restart
the ram worked great for 12 hours then the computer restarted on its own
since then it hangs on restart and never gets to the desktop

It may not have anything to do with the RAM, or it might.
Not enough to go by to say for certain, and the blunt "get new RAM" doesn't address how to troubleshoot or resolve most likely.
Was it installed properly?
How much did you install?
Make? vendor.
Try running with just the new RAM.
Run Apple Hardware Test - boot 'd' key on startup, you may need your OEM Install DVD.
Run Rember and/or Memtest utility to test memory, or TechTool Deluxe.
When a computer restarts on its own it often means there was a kernel panic or something and damage to files, directory, journal and in need of repair, booting off your DVD or another drive to repair the drive, delete some files, turn journaling off and then on.
http://docs.info.apple.com/article.html?artnum=106227
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

870A Fuzion Bug Report

870A Fuzion Bug report
http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2105
870A Fuzion + X2 BE555 @ Phenom II 4000MHz
Ripjaws 2GB *2 1600 7-8-7 1T
Power supply OCZ 850W
VGA Manli GTX295
Test with Windows 7 32Bit & 64Bit
nvidia driver 260.63 & 258.96 WHQL
Multi-GPU Computing Driver v1.6.108 and New Version from http://www.lucidlogix.com/
if install Lucid Hydra driver and software Windows freez and restart BSOD
Error nvldmkm.sys
- disable or enable SLI -->> Hank and restart
- install VGA slot 1
- reinstall Windows for test
now used with not install driver and hydra software

Quote from: Jack t.N. on 28-September-10, 01:41:11
If I am not mistaken, you are only using one video card. Is that a correct assumption?
using one video card work great
Thank you
Fix step
1. uninstall Lucid Hydra driver and software
2. install nvidia driver and disable SLI
3. Install Lucid Hydra driver and software
Work

870a fuzion atx 6pin power connection

Can anyone help me with my new 870a fuzion board im setting up. It has the 8 pin cpu atx which plugs in no problems. But than it also has this 6 pin atx connection to the motherboard it says for the videocard. My power supply has no 6 pin atx connection (does a 6 pin mobo connection even exist). Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama. Or do i put my other 8 pin atx connection in an leave 2 pins hanging out. Is this correct first pc ive built in a few years.

Quote
Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama.
Correct, PCI-E 6-Pin.

MSI 870-G45 AM3 AMD 770 ATX AMD Motherboard/ video problem

yes i have the MSI 870-G45 AM3 AMD 770 ATX AMD Motherboard and the (SAPPHIRE Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card (100314-3L )) video card and every so often my video stops and freezes then it resets and run fine for anywhere from 5 mins up to 2+ hours what can be causing this? my power supply has way more power then is needed. all hardware is correct and properly working and updated and meets/is way above the required/recommended system requirements please help me both sapphire and when i have called msi they haven't been able to help

Quote
yes he did try doing that and i still have the problem
If he tried the VGA in another computer and the problem carried over, it is a bad vga. (So long as there is adequate power)
Do both computers have the same psu? What are the 12v rail amp ratings on the psu's? (Radeon HD 6870 - 28A and a 500W PSU minimum)

I am having a problen syncing my 80gb Ipod to my library. Its been syncing for over 24 hours. I have reset the Ipod and reinstalled Itunes. I am running windows 7 ,6gb of ram.Nothing seem to help

I am having a problen syncing my 80gb Ipod to my library. Its been syncing for over 24 hours. I have reset the Ipod and reinstalled Itunes. I am running windows 7 ,6gb of ram.Nothing seem to help. It take 2 miniutes to copy one song(very slow)

UPDATE:
Ok I am offically an idiot.......messed about a bit more and found this post very very helpful:
http://discussions.apple.com/thread.jspa?threadID=396267&tstart=15
Managed to get my ipod restored to factory settings (yay!) However then it was being recognised in windows but not in itunes.......to solve this I referred back to Apples excellent troubleshooting guide. Installed the lastest version of itunes.....and there we go! We have a working ipod! I am so delighted and no longer on the verge of tears! (I so thought I had completely banjaxed my brand new ipod!)
Dell Windows XP

870A Fuzion AMD 770 ram 1600mhz (non oc)..HELP..!!

Similar Messages

Maybe you are looking for