870A Fuzion second pcie slot

Can a pcie x1 sound work in second pcie x16 slot?
I have an asus xonar dx that I cannot seem to get to work in that slot. I have to use pcie x1 slot right next to mu gfx card, which interferes a bit with the air flow. If there is a way to use the other x16 slot for this purpose, would be great. If not......oh well no biggie.
any help appreciated. thanks

Well, Svet, as I stated in original post, I already tried. No luck.....I was wondering if there is something specific to the mobo I needed to do. It is said that you SHOULD be able to do this with ANY pcie x16 slot, on any motherboard, but maybe not with this board because of Lucidlogix hydra chip. I don't know.....maybe I will contact MSI and see if this is the case. Thanks for the prompt response though. Can you keep me posted if you find out before I do? That would be cool, and thanks in advance.

Similar Messages

Second PCIE Slot

Hey everyone..
I was wondering if I had a single GTX 260 GPU and I wanted to put it into the second slot, would it run at x16? The motherboard is a GD70

The 2nd PCIe slot is X8 slot(this is actually slot3). The 3rd blue slot(PCIe-4, but the 5th slot down) is X16 and you should be able to use that. Do remember, this board does NOT support SLI. This board only supports Crossfire. So, if you ever plan on using multiple GPU cards, you will need to use ATI.

Help plz pci slot

Hi
I have a MSI k7n2 Delta L
I am using my motherboard onboard sound (ac97) because i get back my SoundBlaster Live! 5.1 only in some days.
My question is in which slot i have to put it in to get best performances ?
( I already have TV Tuner on the second Pci slot from the top )
(excuse my english i am french )
Thank you...

be sure the soundcard and video card uses different irq

W520 second half mini-pcie slot

Under keyboard only one full and one half mini-pcie slots, specs on w520 page said 1 full, 2 half
Where is second one half slot located?
Solved!
Go to Solution.

You may check under Palmrest place.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

Satellite A500-1GH What is a empty PCI slot with JGPS sign

Almost a year ago I bought a Toshiba Satellite A500-1GH.
I cannot say that I am not satisfied with the computer or the company.
The problems that I had was the Display problem (stop working for seconds) which was software problem (updated nVidia 8.16.11.8875) and with the HDD which stop working but company changed with a new one.
Now I wanted to upgrade the second memory module from 2GB to 4GB so I can have 2x4GB, but when I opened the memory compartment, I saw next to them an empty PCI slot with the sign JGPS.
Does anybody know what that is?
And if yes what is the part number?
Thank you in advance.

Hi mate
As far as I know JGPS is an GPS connector.
Possibly this connector would be shared by 3G miniPCI card.
As far as I know this Satellite A500-1GH has not been equipped with an 3G module and therefore the miniPCI slot is empty.
> And if yes what is the part number?
I don't know the part number but all parts can be ordered from local Toshiba ASP

Upgrading Mac Pro (2009) from to NVIDIA Quadro 4000, what PCI slot to use ?

I am upgrading my Mac Pro (2009) from the Nvidia GT120 (stock) to the Nvidia Quadro 4000 for Mac. The GT120 was installed in the PCI Slot #1 and I would like to install the Nvidia Quadro 4000 in the PCI Slot #2, that way the Fan in the Graphics Card (Quadro 4000) will have better air circulation, is there any limitation or recommendation regarding the PCI slot to use ?, thanks a lot

I have an early Mac Pro 3,1.
The user manual I downloaded states:
Slot 1 PCI Express 2.0 16-lane
Slot 2 PCI Express 2.0 16-lane
So I'm assuming that means both slots 1 and 2 are the same and it doesn't matter which of my two graphics cards go in which slots?
Also, my second graphics card is a Quadro 4000 which is for Adobe Applications that use the CUDA engine. I don't have any monitors hooked up to it.

870A Fuzion Bug Report

870A Fuzion Bug report
http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2105
870A Fuzion + X2 BE555 @ Phenom II 4000MHz
Ripjaws 2GB *2 1600 7-8-7 1T
Power supply OCZ 850W
VGA Manli GTX295
Test with Windows 7 32Bit & 64Bit
nvidia driver 260.63 & 258.96 WHQL
Multi-GPU Computing Driver v1.6.108 and New Version from http://www.lucidlogix.com/
if install Lucid Hydra driver and software Windows freez and restart BSOD
Error nvldmkm.sys
- disable or enable SLI -->> Hank and restart
- install VGA slot 1
- reinstall Windows for test
now used with not install driver and hydra software

Quote from: Jack t.N. on 28-September-10, 01:41:11
If I am not mistaken, you are only using one video card. Is that a correct assumption?
using one video card work great
Thank you
Fix step
1. uninstall Lucid Hydra driver and software
2. install nvidia driver and disable SLI
3. Install Lucid Hydra driver and software
Work

DIMM1 now read as PCI Slot?

Hey guys, Happy Holidays!
My Board/System is actually running great right now, so this is more of an observation/warning than urgent cry for help. I recently changed from Corsair TWINX 3700 (434) DDR SDRAM to Corsair XMS 3500C2 (417) DDR SDRAM. The resukt was a terrific increase in performance,stability, and especially OC (210@1:1 to 223@1:1 PAT Turbo). However I was flying so high cuz of the big OC that I got greedt and tried to boot with 220FSB and use Clock Generator to get more. It worked! Until I hit 227FSB where I had a hard crash. This probably is wehat killed my Promise RAID ), and also made DIMM1 no longer readable as full! In fact it reads in Sandra, AIDA32, SMBIOS viewers, Windows info etc. as a PCI Slot. I moved my RAM to DIMMs 2&4 and all is good (I hope). Any thoughts, comments, jokes at my expense ? It may just be the SMBIOS being the way it sometimes is but, food for thought...

Actually, all of my various utilities, including the Tool House USA diagnostic suite, seem to have reestablished accurate reads of the MOBO. SANDRA 2004 however, still claims that I have DIMM4 occupied w/ 512 DIMM3 empty DIMM2 occupied w/ 512 and PCI Slot empty.
Could I have actually screwed up so badly that I shifted signals or current signatures (these are just terms I am using in an attempt to sound competent). :hypecrite: I gotta tell you man, at this point even if the bloody thing is planning on blowing u and taking me with it, I still do not want to give up on it! I shudder to think of the possibility of starting over w/ another board. And even though I am quite fond enough of my fast little "Neo", I do not think I could justify replacing it with a second. There just seem to be MOBOS which are better buys considering we are now in possession of all the facts we did not have access to 6 months ago. By the way, my system is absolutely flyin, and far from displaying any signs of instability, it has actually stopped the little problems it had untill the Promise RAID went kaput!. My UPS no longer gives config errors in the Event Viewer. My games, 321 X-Copy, IE6, and backup programs are just ripping along like never before. One other note (I thought I had stated this earlier, sorry) I had Norton Ghost 2003 installed for use w/ an IDE Drive which I would fill with important data, backups etc.. In other words, even though the Symantec people told me it was safe, I was just too suspicious of the imaging process with a striped array. I did use it once a while back (on the Intel ICH5R RAID, never Promise) before I had gained anything even remotely related to a clue but everything worked fine, and I have since even established the DVD-RW image integrity.
Sorry dude, I cannot seem to make my posts concise. I hope you understand that I am not yet totally comfortable with either the subject matter, nor the medium Which is why this post is somewhat redundant in light of your last post. Thanks for your time, and the positive news.
John

Try new pci slot --- crash wind

I was having issues with the driver installer not detecting my SB2 Platinum in windows XP. I tried moving the card to a new slot and now when I boot windows it only works for about 90 seconds before I get a hard crash, as if I had pressed the reset button, every time I boot. The card works fine in ubuntu linux. Something is going on in windows after moving the card to a new PCI slot, as reccomended to remedy the driver installer issue.
I have tried both the CD installer and the downloaded drivers and there is no way to get either to work. The card worked for years in this computer and now it won't play nice with windows after a fresh install.
Any Ideas?

Try this..
?
Go to Add/remove programs and uninstall everything creative.
?
Restart
?
Get the NEWEST set off this creative website. Install everything.
?
Restart
?
Go to add/remove programs and this time in the uninstallation remove JUST the audio drivers. It should give you an option to uninstall everything or uninstall just some things.
?
Restart
?
At restart it should give you a prompt about having new hardware. Ignore it/close it out. Go to device manager and manually direct it to look for drivers in the correct directory.. I think it was drivers/xp .. something or other.
?
?
I have had your problem and I have tried everything, and this is what worked? twice tested now. I don?t know why but I had to have the software installed first and the drivers installed manually from that directory.

HI z87m New owner - Question on PCIE slots

Hello I am a new Z87M owner and I had a question about the PCIE Slots
I am building a new system and may because of the build have to use the Lower PCI-E slot for the one GPU board the system will have.
will either slot operate at 16x regardless of which slot I use? or am i taking a performance hot by using only the second slot? Thanks in advance

Quote from: misterx1969 on 07-June-14, 13:11:43
Hello I am a new Z87M owner and I had a question about the PCIE Slots
I am building a new system and may because of the build have to use the Lower PCI-E slot for the one GPU board the system will have.
will either slot operate at 16x regardless of which slot I use? or am i taking a performance hot by using only the second slot? Thanks in advance
Usually not. The lane configuration is generally always the primary 16X by itself, the other slot is 8X regardless if the primary slot is not used. Not that big a performance hit anyway with the 8X.

Does changing pci slots reassign irqs?

i've tried sticking my soundcard in every pci slot on my nforce mobo but the irq never changes. i thought it was supposed to. is this something to do with the mobo?
in the bios, there is an option to 'reserve' irqs. what's that about?
thx

Quote
hi,
tried reinstall and managed to get up to 22 irqs (yay!), but pci slots don't correspond to the ones you listed. my graphics card agp is on irq 5 and sharing with something else. changing soundcard from pci 5 to 4 still doesn't change irq, it sits on 11.
what bios settings did you use? my configuration during reinstall:
high performance defaults
apic = enabled, 1.4
pnp os = no (maybe have to make this 'yes'?)
reset escd = no
escd = auto
windows xp pro
thanks
Something is definitely wrong with the install. Once APIC has been enabled no PCI device (other than system management) is supposed to use IRQ's below 15. Those IRQ's are left alone for "legacy" purposes.
BIOS 2.6 (2.4 is an option assuming you don't mind the PCI performance hit).
BIOS is flashed with: awfl820.exe w6373nms.260 /py /sn /cd /cp /cc
Reset
(ignore the above if you are already on 2.6)
Enter into BIOS
Load High Performance Defaults confirm Yes and then choose Save and Exit Setup
Enter into BIOS and configure as follows.
Standard CMOS Features:
Set Date and Time
Set Primary Master to Manual and leave Access Mode at Auto
Set Primary Slave to None/Auto
Leave Secondary Master at Auto/Auto
Leave Secondary Slave at Auto/Auto
Drive A 1.44, 3.5 in.
Drive B None
Video EGA/VGA
Halt on All Errors
Advanced BIOS Features:
Quick Boot: Enabled
Full Screen LOGO Show: Disabled
CPU Internal Cache: Enabled
External Cache: Enabled
First Boot Device: HDD-0
Second Boot Device: HDD-0
Third Boot Device: HDD-0
Boot Other Device: Disabled
HDD S.M.A.R.T: Disabled
Swap Floppy Drive: Disabled
Boot up Floppy Seek: Enabled
Boot up NumLock LED: On
Gate A20 Option: Fast
Typematic Rate Settings: Disabled
Security Option: Setup
APIC Mode: Enabled
MPS Version Control for OS: 1.4
OS Select for DRAM > 64MB = Non-OS2
Video BIOS Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
Small Logo(EPA) Show: Disabled
Advanced Chipset Features:
System BIOS Cacheable: Disabled
Video RAM Cacheable: Disabled
DDRAM Auto Precharage(W/R): Enabled
CAS Latency Override: 2 Clocks
AGP Aperature Size (MB): 128MB
Monochrome Access: AGP
AGP Bus Driving Control: Auto
Frame Buffer Size: 32M
Integrated Peripherals:
MCP OnChip IDE Device:
OnChip IDE Channel0: Enabled
OnChip IDE Channel1: Enabled
IDE Prefetch Mode: Enabled
Primary Master PIO: Auto
Primary Slave PIO: Auto
Secondary Master PIO: Auto
Secondary Slave PIO: Auto
Primary Master UDMA: Auto
Primary Slave UDMA: Auto
Secondary Master UDMA: Auto
Secondary Slave UDMA: Auto
IDE DMA transfer access: Enabled
MCP OnChip PCI Device:
MCP AC97 Audio: Enable
MCP MC97 Modem: Disable
MCP OnChip LAN: Auto
MCP SPDIF Out: Enable
Onboard SuperIO Device:
Onboard FDC Controller: Enabled
Onboard Serial Port 1: 3F8/IRQ4
Onboard Serial Port 2: Disabled
Onboard Parallel Port: 378/IRQ7
Parallel Port Mode: ECP+EPP
EPP Mode Select: EPP1.9
ECP Mode Use DMA: 3
Game Port Address: 201
Midi Port Address: Disabled
Init Display First: Onboard/AGP
OnChip USB: Enabled
USB Keyboard Support: Disabled
BIOS Protect: Disabled
IDE HDD Block Mode: Enabled
POWER ON Function: Hot KEY
Hot Key Power ON: Ctrl-F1
Power Management Setup:
IPCA function: Enabled
Sleep State: S3(STR)
Power Management Option: User Define
Video Off Method: DPMS Support
MODEM Use IRQ: NA
Soft-Off by PBTN: Instant-Off
IRQ/Event Activity Detect:
USB Resume from S3/S4: Enabled
Wake-Up by PCI card (PME): Enabled
IRQs Activity Monitoring:
IRQs Activity: Primary
IRQ3 (COM 2): Enabled
IRQ4 (COM 1): Enabled
IRQ5 (LPT 2): Enabled
IRQ6 (Floppy Disk): Enabled
IRQ7 (LPT 1): Enabled
IRQ8 (RTC Alarm): Disabled
IRQ9 (Reserved): Enabled
IRQ10 (Reserved): Enabled
IRQ11 (Reserved): Enabled
IRQ12 (PS/2 Mouse): Enabled
IRQ13 (Coprocessor): Enabled
IRQ14 (IDE Channel 0): Enabled
IRQ15 (IDE Channel 1): Disabled
Power Status Led: Single
PnP/PCI Configurations:
PNP OS Installed: No
Reset Configuration Data: Disabled
Resources Controlled By: Auto(ESCD)
PCI/VGA Palette Snoop: Disabled
PC Health Status:
CPU Warning Temperature: Disabled
CPU Fan Detection: No
Shutdown Temperature: Disabled
Warning_Beep: Disabled
Frequency/Voltage Control:
Clock Spread Spectrum: Disabled
CPU/MEM/AGP's Freq: 133/266/66
CPU CLOCK RATIO: 11.5
CPU Voltage Adjust: Default
If your memory is not compatible with the DDR Memory Precharge of a CAS latency setting of 2, make sure to adjust those values appropriately.
Also make sure to adjust your CPU/MEM/AGP and Clock Ratio setting to the one that correspond with your system.
Begin Windows 2000 install. When text stating, "Setup is inspecting your hardware" appears hit F5. Doing so several times is okay to make sure the keystroke is recognized. Choose "ACPI Uniprocessor" from the menu that appears shortly after.
As a side note, it would appear that installing SP2 before installing the chipset drivers can cause problems. Always NVIDIA chipset drivers first and then SP2.
The end result should turn out like so:
http://www.geocities.com/ryu_connor/irq.htm
The results do vary some. My current install has chosen some different values than the one pictured above, but nothing radical.

870a fuzion atx 6pin power connection

Can anyone help me with my new 870a fuzion board im setting up. It has the 8 pin cpu atx which plugs in no problems. But than it also has this 6 pin atx connection to the motherboard it says for the videocard. My power supply has no 6 pin atx connection (does a 6 pin mobo connection even exist). Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama. Or do i put my other 8 pin atx connection in an leave 2 pins hanging out. Is this correct first pc ive built in a few years.

Quote
Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama.
Correct, PCI-E 6-Pin.

MSI Z97 Gaming 3 PCI slots problem

I have last one problem with pci slots asmedia on mb. In one of the slots installed sound card ASUS Xonar D2/PM, and after installation driver, getting settings to work with sound system 5.1, some times on very first second of start the music track, in speakers i hear one high "click", and same has been when i rewinding music tracks! I tested this sound card on another motherboard old P45 intel before, but worked pretty fine.
Sorry, my english is no good!
Maybe this problem with compatible?

Quote from: JLio01 on 08-May-15, 12:49:34
Are you able to try unplug all the 5.1 audio jack and plug one back each time to see which one has the problem?
Yes of course
Quote from: JLio01 on 08-May-15, 12:49:34
Do you have Sound Blaster Cinema installed?
No
It's no card problem, this program on controller or program with mb!
On another mb, i have pretty fine normally sound without "click"!

Failure with second PCI vga card..

I recently found a monitor in my backyard, and decided i'd try a multimonitor setup.
So i installed an old ati 3d rage pro card in a pci slot. Booting up, nothing appared on the other screen, but the card showed up in device manager without any problems. Initializing pci card first, resulted in both screens turning on, but system hang at log in. I use w2k.
So i upped to bios 2.6, same thing happens, and my w2k installation goes corrupt. So i install w2k again and just install the drivers for the onboard vga, and hey it works! But only when i initialize pci first.
But when i install the rest of the drivers for the mainboard it all fucks up again and hangs after i press log on... Any clues? I used the latest msi nforce drivers, i have removed all other cards from the pc.
tnx

if you mean power supply by ps, it's a brandless tower.
I have 1x256 meg PC2100 ram, not sure about brand here either. Maybe it'd help with a second chip?

870A Fuzion second pcie slot

Similar Messages

Maybe you are looking for