870A-G54 No USB from 3 headers?

Ok so I tried to plug in a flash drive last night to my front USB and nothing happened. This is a new build but the front ports had worked previously. So I plugged it in the back figuring maybe the plug came off. Well this morning I checked it and the connection on the header was fine. I tried all 3 headers with the plug for the front panel and nothing. I also tried a rear USB panel I had laying around and nothing. I tried 2 flash drives, a powered HD and a port powered HD and none work.
Anyone have any idea what the issue could be? Could all 3 headers just go back like that?

Quote from: Wonkanoby on 20-March-11, 03:39:25
you can try but if it all goes wrong again you know whats faulty
yeah it definately doesnt have any juice to any of the 3 onboard headers.
Guess I'll have to get this one replaced.

Similar Messages

870A-G54 - Bios recovery requested

Hello, I have bought the mainboard 870A-G54 "second hand" from msi-shop.de and wanted to use it with a AMD Athlon II X4 640 CPU.
On first start up of the new system it told me: "Bios recovery requested. Starting bios recovery" I downloaded 7599vh4.zip from the msi website as I thought it was the correct archive according to the cpu-list to a usb-stick, however the system was asking then explicitely for the file a7599ams.hg0. I downloaded that archive onto the usb stick.
When starting the pc and doing the bios recovery the system is finding the file it wants but directly after then restarting with no effect or it turns me to a blank black screen.
What shall I do now?

Quote from: Stu on 29-July-12, 19:32:50
What else is in your PC? >> Posting Guide <<
1x 4gb Samsung DDR3-1333 PC3-10600 CL9 240 Pin 1333 MHz M378B5273DH0-CH9 Stick installed in the slot next the cpu
Asus GeForce 8800 GT
1x seagate Barracuda 120gb sata
1x noname dvd/rw writer ide
be quiet straight power e7 400w psu
Quote from: Stu on 29-July-12, 19:32:50
Try clearing the CMOS and then start again.
Doesn't change anything.

870A-G54 - Lost use of of ALL usb 2.0 ports after months no issues

First off I have been using this board for about 6 months with no issues. None what-so-ever. That was until my hard drive failed (it was old anyways.)
I replaced the failed drive and reinstalled Windows 7 x64. Except I was only able to plug my keyboard/mouse into the USB3.0 ports. None of the usb 2.0 ports on the board worked.
I disconnected the USB headers (for my case,) swapped the memory, flashed the bios, and reconnected the all the cables (power, sata, etc..)
On top of that, it takes about 3 full minutes for the system just to post. Usually it took maybe 3 seconds.
I'm stumped. Any thoughts??
Specs below: ( CPUID Link: http://valid.canardpc.com/show_oc.php?id=2004687)
MSI 870A-G54 (MS-7599)
AMD Phenom II X4 955
BIOS: V17.14 08/07/2011
Corsair XMS3 (CMX8GX3M2A1600c9) 1.65V (2 x 4GB)
Radeon HD 4870 Video Card

Quote from: Fredrik on 20-September-11, 01:22:03
Some times Windows gets confused during installation, if there are strange things attached. USB before Windows for example is n o t a good idea.
Use absolute minimum parts for the installation of Windows, no extra USB things, PCI-cards, hard disks, sticks of memory etc. As little as possible!
You can add all things after the installation is completed.
A new Windows installation, then.
This isn't a Windows issue. I can disconnect everything (even the hard drive) and boot with just a monitor and keyboard, and the keyboard will not work to even access the BIOS (DEL key) unless it is in one of the USB3.0 ports.

870A-g54 front panel audio missing from bios

Boy is this motherboard full of glitches. Teaches me a lesson about buying the cheapest for crossfire.
I would really love to use my front panel audio. Only problem is my front panel audio isn't in the BIOS!
When i bought my 870A-G54 I had to do a BIOS flash to support my six core CPU. Could the BIOS flash have changed my BIOS menu and taken away the front panel audio setting?
Lol does the motherboard even have an option to turn front panel audio on and off?
I had the bios flashed in the store the moment i baught it so i dont know how the bios looked before the flash. The Guy failed to flash my board because he had the wrong bios update and it was too big. So i had to download the right one from msi myself. People like that shouldn't work in computer stores.
My front panel audio has one of those single plug and go audio cables so im shure i couldn't install it wrong, even had the manual next to me.
Am i to be stuck without front panel audio??

Quote from: Stu on 20-October-11, 03:51:31
BIOS does not have any options for front panel audio, it is controlled by the Realtek Audio Manager control panel.
What's the exact problem you're having?
Well i plug in my headphones to front audio and the software should recognize it and light up the ports on screen. But they stay greyed out and i have no mic or audio.
On my old asus motherboard i had to make shure front panel audio is turned on sorry for the confusion.
any idea why it doesn't pick up my headphones?
Ive tried diffrent headphones lol they dont work either

MSI 870A-G54 Blue Screen & Corruption Issues in Windows 7 64-bit

I am having periodic blue screen and corruption issues in Winodws 7 64-bit with my MSI 870A-G54 system. I have a Phenom II X2 560 BE processor, 2 4GB DDR 1333 DIMMs (first bank - unganged), 2 2GB DDR3 1333 DIMMs (2nd bank - unganged), 2 Hitachi 1TB 32MB Cache HDD's in a RAID 0 array, two Galaxy PCIe2.0 GT9500's, 550w power supply, internal DVD drive, and 1 1TB Seagate external 3.0 USB drive. After I load all the supplementary drivers from the MSI site (ensuring I use the 64bit versions), my system becomes unstable. I even tried the new motherboard chipset drivers from AMD (10.12). I am running the latest firmware as well (17.7). The system in not overclocked in any manner and I experience the same results with fail-safe and optimized settings.
I have tried isolating the issue after loading each driver, but due to the random nature of the issue, I am not having success. I have also performed memory and CPU tests that report no errors. Any ideas?
Thanks for your help...

What specifications are you referencing that indicate this processor only works with two sticks of RAM?
My exact specifications are listed below. Thanks again for your help...
Component   Manufacturer   Model     Notes
Motherboard   MSI     870A-G54
Processor   AMD    Phenom II X2 560 BE
Video Card   Galaxy     9500 GT     PCIe 2.0 - 512MB DDR3
Video Card   Galaxy     9500 GT     PCIe 2.0 - 512MB DDR3
Case     Antec     Three Hundred     ATX
Power Supply   OCZ     OCZ550FTY     Fata1ty 550w Modular
Hard Disk Drive   Hitachi     H3D10003272S     SATAII 1TB 32MB Cache
Hard Disk Drive   Hitachi     H3D10003272S     SATAII 1TB 32MB Cache
Memory     PNY     MD4096KD3-1333     1 2GB DDR3 1333MHz
Memory    PNY     MD4096KD3-1333     1 2GB DDR3 1333MHz
Memory     OCZ     OCZ3G1333LV8GK    1 4GB DDR3 1333MHz
Memory     OCZ     OCZ3G1333LV8GK     1 4GB DDR3 1333MHz
DVD Burner   Sony     Optiarc AD-7261S     SATA

870A-G54 rebranded as 870S-G54?

I was poking around inside my computer and noticed that printed on the motherboard was USB 3.0 even though my 870S was not spec'd as having any of them. Then I looked at where my board was branded as 870S to find a sticker over it. Out of curiosity I peeled back the sticker and sure enough underneath was stamped 870A. Can anybody explain this to me please? I have sent a message to CS but have not received anything in return. Thanks!

870A- and 870S-G54 are the same boards apart from the USB3.0 chip on 870A. It's the same board layout, cooling and chipset. As 870S-G54 is a stripped-down 870A-G54 as far as USB3.0 goes it uses of course the same board. Without the USB3.0 it's a 870S. Can't see the problem as it is quite normal.

870A-G54 Problems

Ok so i mounted the board, connected everything started running from the cd etc.. the cd drive and winki operating screen worked just fine for a while.
I went out and purchased a new hard drive and windows 7 because i couldn't validate my old version of xp. so the time comes to install windows, i boot up the system, open the cd drive and then i have second thoughts about which disc i needed to use 32b or 64b, so i go look it up for a few minutes on a laptop in another room. Finally when i come back the disc drive has closed itself and wont open again, the screen said to insert disc and then restart to load from cd drive. i power off, turn it back on and my disc drive wont power on and i cant get any visuals.
I dont think it can be my drive or my psu because when i disconnect my cd drive from the MB it turns on just fine, but when i connect them it just shuts down.
Any help you can give would be MUCH appreciated!
IF its any help i have a corsair psu and a phenom processor

MSI 870A-G54 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
CORSAIR CMPSU-750TX 750W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
Western Digital 320g, 7200 rpm, 3.0 gps
ZOTAC Synergy Edition ZT-20303-10L GeForce 210 1GB 128-bit DDR2 PCI Express 2.0 x16 HDCP Ready Video Card. NVIDIA
- Soon to be Windows 7 64b
AMD Phenom II X4 955 Black Edition Deneb 3.2GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor

Ram issue 870A-G54

After flashing latest bios for AM3+ system see only 2gb ram but I have installed 2x2 Mushkin silverline.CPu-Z shows me two stick ram and their timings but bios and win7 see only 2gb.What is the problem any idea?In previus bios everything was fine.
My system:
-Windows 7 64bit Ultimate
-CPU Phenom IIx4 955 BE
-MSI 870A-G54
-2x2 Mushkin Silverline
-Seagate 7.12 500GB
-Spinpoint 1Tb F3
-Asus 4850 512ram
-DVD-RW Pioneer
-Corsair 550V

Quote from: hakunamatata on 04-July-11, 02:45:46
I checked from the MSI usb tool bootable software report in a notepad..
I'm using Corsair gaming series ddr3 1333mhz ram and when i use CPUID it shows 667mhz (max bandwidth) at SPD now. Is it normal?
Quote from: hakunamatata on 04-July-11, 02:45:46
I checked from the MSI usb tool bootable software report in a notepad..
This is after the flash or? Can you paste all info from report?
Quote from: hakunamatata on 04-July-11, 02:45:46
I'm using Corsair gaming series ddr3 1333mhz ram and when i use CPUID it shows 667mhz (max bandwidth) at SPD now. Is it normal?
Yes its normal, 667MHz mean DDR1333 its double date rate

870A-G54 problems with bios, ram and CnQ

Hello i have some weird problems with my mobo. CnQ dont work i dont know why , in bios all options are turned not automaticly but forced to be "enable" ,and still my procesor multipler and voltages don't change , at the beginning after installing win7 64x it worked but now no :/.
2.next i have problems with memory i have corsair xms3 2x2gb [email protected] at old bios(AH0) my memory just did'nt want to work on 1.6k in dual channel and 1,2 slot i tried even to use default voltages tested by corsair (1.65V i had to use 1.66) result it dont work. after putting them into 3,4 slot it works even on 1.5V not 1.65V then i used to have them on 3,4 slot do u think that 1,2 slot is damaged ?.
3.Problems by bios. I updated my bios to the lastest version (from software downloaded from msi.com probably it had name "live update 5") , of course updated by usb stick .Then after update i see that my ram looks like reserved bios showing me that i have 2gigs of ram -.- (but only on 3,4 slot x.x) after change slots (1,2) it working and see my full ram (4gigs). Is that HD0 beta version of bios ? it looks like that .I don't see my logo screen it looks like that option was cut off from the bios , i don't see any "corporation" logo while booting the system.
I though that msi making solid motherboards as u can see i have many problems with this mobo.
Help me and thanks for all post (which wanna help me :D)

CPU brand, AMD PHENOM II X4 955BE C3
Motherboard model 870A-G54 REV 3.0
Memory Corsair xms3 2x2gb cl9 1.6kMHz
Nvidia Geforce gts450 oc1 1gb gddr5 gf106
Hard drive(s) samsung 250gb sata 2 80mb/sec
Windows 7 home premium 64bit
Delta dps-700MB A 700W (12v1 17A0 (12v2 18A) (12v3 17A) (12v4 17A) (+5v 25A) max for 12V= 50A (+3.3 20A) (-12 0.6A) +5V and +3.3 max 160W MAX output 700W

870A-G54 V3.1 instant FF on POST, all board LEDs and fans on.

Trying to get a 870A-G54 V3.1 working. I get instant FF on a PCI POST card, all the blue LEDs and fans are on, so is the red LED on the overclock button. I have 16 gig of new Patriot DDR3 plugged in and an AMD Phenom 2 X2 555 CPU I know is good because I pulled it off an AM2+ box it's been running in for a while.
The board is a used freebie, condition unknown due to the giver not having an AM3 CPU to test it.
I have no other AM3 CPU or any other DDR3 RAM to try. Is there any way to make it load the latest BIOS off a USB stick? Or am I going to have to dig up some old single core Sempron just to flash the latest BIOS? I've run into this problem many times over the years, pretty much since the first PC boards with flash BIOS.
Or could it be that a 330W supply just isn't enough, even with a piddly little low profile nVidia GT520?
Would be nice to know if the board's just defekt or if it's something fixable. In some searching on this, I've found this same instant FF issue with this exact model MSI board quite a lot.
Right now this board is shoved to the back burner, I ordered a surplus/new OEM board from a different manufacturer, and will also get a nice 80% efficient 500W supply. I've a system to get built and fiddling with a problem board isn't getting it done.

Quote from: badboy2k on 13-March-14, 22:55:48
1: what is the boards serial number (leave off the last 3 digits)? (should be on the rear of the board so I can give you an idea of what BIOS version it has)
Only number is by the CPU socket, B316023***
Quote
2: what 330W PSU? (if its a split +12v Rail unit then that could very well be the problem as it will be anaemic to say the least and barely passable)
Ultra ULT-350P label says (+5V 25A +3.3V 18A 150W), (+12V 18A 216W), (-5V 0.6A 7.2W), (-12V 0.6A 7.2W), (+5VSB 2A 10W)
Quote
3: also was the 8pin EPS CPU power Header plugged in?
4 pin plus the other 4 pins connected to two separate drive power wire bundles with a dual molex adapter.
Quote
4: what sticks are those DDR3 units eg: 4x4GB??? and what speed are they rated at?
Patriot PS000562 4GB PC3-10600 1333Mhz. Hmmm, the label lies! Fine print says (2X2GB)Kit. 8 gig will be enough. Got them in an online auction lot from a computer tech school that closed. They're from 2 different batches, T-0009264 and T-0009267. Solder mask is a slightly different shade of green and the PCB material is different color too. Trace layout and chips are the same.
I have an Antec "earthpower" 500W supply ordered. It has an 8 pin connector.

BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
Changelog:
A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
- Add new bom
- Fix the raid function fail.
- Fixed CPU Frequency display error in CPU Specifications.
- Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
- Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
- Fixed AM3+ CPU ratio error under CPU-Z information.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

E7676IMS.163 --> E7676IMS.164
* Adjust Lowest GT Ratio for different CPU.
* Fix OC menu can't select down(when OC Genie Button Operation Enabled).
* Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
* Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
E7676IMS.164 --> E7676IMS.165
* Update Memory Initialize Reference Code to version:1.2.2.00
* Add U-key function support USB3.0
* Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
* Hide the item "Super IO Chip".
E7676IMS.165 --> E7676IMS.166
* Remove USB3.0 Legacy Mode Support item.
* Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
E7676IMS.166 --> E7676IMS.160
* Release MP BIOS.
E7676IMS.160 --> E7676IMS.171
* Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* Fixed UKEY compatible issue.
E7676IMS.171 --> E7676IMS.172
* Fixed default DRAM voltage incorrect issue when used low voltage memory.
* In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
* Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
E7676IMS.172 --> E7676IMS.173
* Fix factory INT15 tool test Hang issue.
* Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
* Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
* Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
* Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<<
Do Not use the BIOS/UEFI integrated M-Flash Routine.

MSI 870a-G54 Hard drive problem.

About a week ago i reinstalled Windows because it started to slow down (virusses and what not) And as soon as i reinstalled everything (programs games etc etc) One of my harddrives used for games did not show up at the bios and at My computer.
So this entire week i've been trying to get it to work again and i've narrowed down the problem today to the BIOS and/or motherboard not giving the power to the HDD in order for it to start and be recognized in BIOS and Windows.
What ive done to come to this conclusion:
- Reinstalled Windows twice,
- Replaced CMOS Battery,
- Flashed the BIOS to every BIOS setting the MSI website had to offer. None worked for the HDD to get powered up again.
- Moved CMOS jumper,
- Changed SATA and powercables on harddrive,
- Tried the HDD on another test PC i had and reformatted it there as well,
- Only hooked up the not working HDD to the PC, (HDD did not spin up, and came to the conclusion at this point that motherboard or BIOS is the culprit)
- Unplugged the powercable to the not working HDD and plugged it back in when the PC was running and i could feel it spinning up, after this i restarted the PC so that the HDD would still get power and it was recognized by the BIOS and Windows and i could use it. As soon as i shut down the PC entirely and restarted it the HDD would not spin up. And i had to unplug power to the HDD and plug it in again and restart PC for it to work properly.
- Checked for bad sectors nothing found,
Everything else is working perfectly. Except that one HDD not getting the power when booting up the PC.
The HDD in question is the "Samsung HD502HJ 500gig" used for Steam games.
PC Specs:
CPU: AMD Phenom II x4 955 Black edition. Put on a new CPU cooler last summer (Cooler master Hyper 212 Plus)
Mobo: MSI 870a-G54
PSU: Antec EarthWatts EA650 (650 Watts)
Graphics card: Powercolor PCS+ HD5870 Put on a custom cooler last summer (Arctic Cooling Accelero Xtreme 5870)
RAM: Kingston ValueRam 1333Mhz DDR3 (8gigs 4x 2gig) Bought 4 gigs extra last summer
HDD1: Seagate ST3160812 AS 160gig used for Windows 7 Ultimate 64 bit (Works perfectly)
HDD2: Samsung HD204UI 2TB used for Storage / Other games than i have on Steam. (works perfectly) Bought last summer with the cooling/system upgrade
HDD3: Samsung HD502HJ 500gig used for Steam games. (Does not work anymore after reinstal) Bought 2 years ago along with the rest of the PC
I am completely at a loss here as to what the problem is. I do not have the funds to buy a new piece of hardware at this time (i think the entire week of struggle would back that up for me lol...). And ive basically tried everything what i know and what i've found through Google and friends. Might have been better going straight to MSI forum and post my problem here but narrowing it down to this not only helps me but the person that is going to post below in this thread as well lol.
Thanks in advance and i hope to hear from anyone soon.

Quote from: Bas on 09-March-12, 19:16:21
Try drive in different PC, as it looks like it died.
HDD's always spinup as soon as power is applied, ergo I think the drive died.
Ive tried it already in 2 different PC's and i have to apologize here for not mentioning that earlier in the topic.
The drive spins up perfectly in both of those PC's and ive checked for bad sectors on both of those PC's as well and it showed that the drive was 100% healthy on both PC's
The drive was working perfectly fine before the reinstallation of windows. Thats why i dont think the drive has died. Because it would be weird that the drive just suddenly gave up right when im reinstalling windows..
It also doesnt add up when i plug the powercable back into the drive while the PC is running and it spins up then and works perfectly until PC is shut down. Thats why i had it narrowed down to the BIOS and/or Motherboard being the culprit.
My best guess is that its software related because the PC does boot up so its not a hardware problem.
P.S.
A friend of mine said that it could be a powersaving issue. But ive looked into the BIOS and i could not find anything about it.

870A-G54 vs. 870A-G54 FX

Hi,
I was wondering if an 870AG54 will support new bulldozers, and now I find that MSI is making such the same mainboard with the same bios, just with black cpu socket, calling it FX, that support new am3+ sockets, and asking 20-30EUR more for such thing..
Any chance to get AM3+ support for "usual" 870A-G54????

Quote from: Henry on 11-October-11, 07:27:15
http://eu.msi.com/news-media/news/1224.html
great news!!
checked stores again, FX version cost approx the same as non-FX version, so hopefully its not just some marketing move, and MSI will support older MoBos with AM3+ bios's - we are waiting for am3+ support to curent AM3 boards MSI!!
at last, bulldozer(FX) CPUs from first reviews is flop so no bother at all att..

870A-G54 rev 3 Buldozer support

Hi , i'm confussed , i bought 3 month's ago this board , when i choosed this board i entered on msi webpage and i readed "870A-G54" there is nothing about revision , few min ago i entered this page second time and what i have read "870A-G54 (FX)" WT* is going with msi ,they saying that your board will support octa core < then i bought one and after months change model of mobo ?. While buldozer comeout msi will say "teoriticaly" your board support buldozer but the revision NO!. Can i request to change my mobo model to new revision without buying new board , i have 2years varranty and bought document ... (send my board to msi and wait for FX rev of my board) -.-....?

I am not sure what exactly it is you are talking about. I just entered "870A-G54" into the search box of the global MSI website and there is only one model:
http://msi.com/service/search/?kw=870A-G54&type=product
Quote
i bought 3 month's ago this board , when i choosed this board i entered on msi webpage and i readed "870A-G54" there is nothing about revision
Again, not sure what you are talking about. The fact that no revision was mentioned, does not mean that they promised Bulldozer support. What does the one thing have to do with the other. When you checked the CPU Support list a few month ago, I am sure that no Bulldozer CPU was listed in it.
Whatever the case may be, please note that when you check the specifications of the board, you will see a big red note on the top telling you the following:
Quote
The Specification may change without notice. The actual products sold are different from areas. Please check the detailed Specification with your local dealers.
Quote
Can i request to change my mobo model to new revision
No. As far as I know there is no new revision. I cannot find anything on the MSI Product pages.
Quote
i have 2years varranty and bought document ...
You have a contract with your reseller, not with MSI. As you live in Europe, the reseller is the one you need to contact regarding warranty & RMA claims. But your board is not defective, so what is the point?
In any case, I checked the BIOS changelogs for your mainboard. It contains fixes like this:
Quote
- Modify some Mojibake in setup menu for AM3+ BOM.
- Add New MP BOM 200 for AM3+ CPU.
- Update Agesa module to support AM3+ CPU.
- Fix system hang on 50h issue when used AM3+ CPU and installed only one memory at DIMM1 or DIMM2.
So, basically, at this point, there is no reason to get angry.
Contact MSI Technical Support directly to find out about the current Bulldozer support status: http://support.msi.com/

*Solved* 870A-G54. The lights are on but no-one's home

Has been working fine and dandy for about 6 months. Unplugged a HD this afternoon, touched nothing else, and now won't restart/POST. Splash screen shows but hangs there and no beep
4 phase power leds are on
Fan is spinning
Splash screen is showing on Monitor
Ticking noise coming from somewhere but can't tell where
AMD Phenom II X6 1055T
MSI 870A-G54 AMD 870
4GB (2x2GB) Corsair XMS3 Classic
1GB Asus HD 5670
500W Silverstone Strider, ST50F-ES
500 GB Western Digital Caviar WD5000AADS
Any help appreciated!
TIA

Very strange. I had already disconnected/reconnected all cables but thought I'd humour you by doing it again, and totally removed the HD I had disconnected/reconnected and it worked!
Thanks for the speedy reply , (just got to wait for Windows startup repair now... )

870A-G54 No USB from 3 headers?

Similar Messages

Maybe you are looking for