875 neo bios help needed

hi
could somebody please email me the 1.74 bios
[email protected]
875 neo fis2r
p4 3.06
2gb
2x maxstor 80gb sata
2x maxtor 120gb sata
fx5600-td256
pioneer 4x dvd burner
plextor 48 xcd burner
thermaltake ali case
zalman cooling
awaiting 3rd replacement mb 1st one turned of one night never to fire up again
2nd has lost the promise raid controller
if this one don't work right its abit in future ?(

perhaps the msi bios programmer is having a cold or something and can't come to work? msi, please what is the status of your bios programmer, give him some coffe or something.

Similar Messages

MSI P31 Neo Bios help

Hi everybody. I have an old style P31 Neo which supports ddr2 800 mhz ram. Now i can not make any overlock even 1 fsb. What is my problem. Bios or anything else. i have an E6750 and corsair 2x1 ddr2 800. these parts was working @3,2 and 1066 mhz with P43 mainboard. But with the P31 they are on standarts. Need your help. Thanks

does it manage to detect any ide devices at all? if not then its probable maste/slave jumper settings... if it does detect them, then its probably cos u need to install windows

K8T Neo Bios advice needed

Please forgive this large post and I hope this is the right place for this.
Below is a copy of my report from CPU-Z. My brother gave me his old computer after it quit workign and he bought a new one. I live over 8 hours away from him so i couldn't just drop by and fix it, nor could he bring it by. Turns out he had several virus's that made his OS un-bootable. The problem is fixed now and he told me to keep it since he has the new one.
Turns out this system is much better than the one I was using. So I moved all my good components to this system. Now I'm going through and updating everything I can. SiSoft Sandra told me to update the BIOS and since I'm having dual monitor problems I figured this might also help resolve that issue as well.
I don't want to fry my board as I just got it and I'm just starting to realize some of it's perks. I've read severl topics here but I'm hesitant to try anything as I'm not rich, nor am I as experienced with all this as many here seem to be. Could someone check out the report below and help me find the BIOS update I need?
http://www.kyoteskorner.com/cpuz.htm

I really appreciate all the time you guys have given me. It seems it is not really a problem that can be resolved without me going out and buying a newer pci graphics card.
I have 2 pci cards from older systems. Rage Pro 16mb and the PNY TNT2 32mb card. Both cards register as Standard VGA Graphics Adapter. I have tried using all the drivers I could find to resolve the issue but it seems that none are current made for compatibility with 64 bit architecture, which is why they are only being recognized as a Standard VGA. Both cards work perfectly if used in my 32 bit system. They both accept their legacy drivers and even get recognized there. So unless someone creates a 64 bit driver for use with windows XP Pro I think I'm going to be stuck.
My hope was that a bios upgrade might allow the system to use a 32 bit driver. From what I see I don't think that's possible so I'm going to give it up as a bad job. Thank you for helping me to realize that a bios update wont resolve the issue. You may have prevented me from frying my board or making it unusable. I don't have the financial means to buy a new card let alone ship this board off to get it fixed had I screwed it up like that.
Also thank you for the recommendation about the via 4in1 drivers. I'm not sure if I had installed those or not before you posted that. This is a great place for someone to consult with more knowledgable people.

KT4V-L Bios Help Needed {Please} ******

First i need help flashing my bios i have 1.8 now
and want 1.9. I am useing xp pro fully updated on an ntsf file format i have no floppy . I have read several places how to do this but all are a little different so i decided to ask the real pro you guys.
would some one give me a full very detailed description on how i can do this preferbally soemone who has run into the same situation i have any help would be much appreciated.
Is there a way to flash using cd-rom ???
MSI KT4V-L {6712}
AMD 3000+ {333}
Corsair XMS3200 512MB 2-3-3-7-T1 184 DIm Black XMS ProSeries {400}
PNY 5900 FX Ultra DDR
Creative Audigy 2 ZS Pro
Sony CD-RW
Sony DVD 16X
Sony DVD-+RW-+
Creative Labs MegaWorks THX 6.1 600 watts
Antec Lanboy
Antec 450 PSU
Thermaltake 3 speed intake
Thermaltake 3 speed exhaust

Yes, that was the recipe given to me in this forum.- Only I considered too risky to try, and reinstalled Floppy Disk. 8)

Which Bios Help Needed

Hi all
Just a quick question
I want to upgrade to Bios 1.4 from 1.3 which I have at the moment.
But the last time i tried official bios 1.40 i couldnt get windows to load
in the end i had to revert back to 1.3
Should i try beta 1.41, Is this the same as 1.40 with a few tweeks
Any advice would be great
Cheers Paul

Thanks Syar
Just flashed the bios to 1.41b
and windows loaded ok with no problems
Is this the bios based on official 1.40 but with raid 4.66 drivers, or is it based on 1.30
whats the difference
Thanks Paul

MOVED: MSI P31 Neo Bios help

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=125360.0

Ok, I've managed to find an old photo of the Bios.
Bios: A7392IMS V2.1 080608 is the number top left.
CPU : Intel Core 2 Duo E8400 3.0Ghz
Gfx : 512Mb NiVidia GeForce 9800GTX+
Mem: 2 X 2GB DDR 2 800 MHz (will try and find out brand).
H/D : 2 * 160Gb drives. One is Seagate, the other Western Digital, both SATA 2.
OS : XP not that it's really relevant...
PSU : 800W. Don't know brand and DC current output. Will try to get these.

875 Neo 2

I wonder can anyone help me out and tell me were i have gone wrong.
i have just bought the MSI 875 Neo 2 mainboard , 3.0ghz FSB800,1 gb ddr400 mem , SB Audio 2 Plat EX , Radeon 9800pro 128,SCSI Card(Booting From)running XP.Bois 1.7
Disabled On Board Sound.
I have a few problems. (Have Downloaded new Updates)
1) Live monitor Crashes with error on Start up. Service is not Loaded ( Sometimes ).
2) Corecenter crashes my board and resets when i click on Auto. What do i need to setup for this to work or what is the best way to overclock this.??
3) when i go into the BIOS and try to switch from Slow Mode to Turbo my borad Hung on OS load and when i powered off and on the error from the bios was Timings to tight.The bios reset to defaults and i had to setup boot order and other things again.
I am new to all the overclocking stuff can anyone suggest anything, i have uninstalled CoreCenter as i did not want to crash my PC is there a Version i should use.
Thanks.

First off i would like to thank you all for you help.
I have solved my problem with the MB being unstable with Corecenter and LiveMonitor throwing up errors at login.
I stopped both apps loading at start up as they must hook into services. Xp is different from NT and 2000 in the way it loads Services, Microsoft thought they would make there OS seem like it boots faster by giving you a Logon screen in XP before all the services are loaded and running.This gives you the image that XP is super fast at loading.
So the problem has been solved, by not having the Apps load automatically while the services are not quite ready. Starting them a short period after login or waiting a while after the login screen comes up works everytime and i have managed to OC using the bios Fast option.
Thanks again , also i must say my PC is now like OH MY GOD HOW FAST !!!!.

875 neo 50% cpu usage while idle

It becomes slower than a 1 gig machine. This happens every now and then with my new unit. Slows everything down. :(
win 2000 sp 3
875 neo fis2r
P4 3.06 HT enabled
4x512 ddr333 kingston
1 maxtor pata drive C
2 seagate sata drives
1 seagate scsi drive
samsung combo drive
1 zip drive
ati 9800 pro
audigy 2
430 watts ps enermax
Please help.

Well, not exactly sure but kinda. This is what happened. Board was replaced with bios version 1.5. Worked fine for 3 days then the mystery 50% usage came back. They then replaced the memory with ddr400 from ddr333. It's been over a week now and the problem has not returned.
So there are 3 probable culprits at one point or another. The board, the bios and the memory. Personally, I find it very odd that memory was a factor. It seems that bios 1.5 is not at all happy with ddr333. :(
Win 2000 SP 3
875 neo fis2r
P4 3.06 HT enabled
4x512 ddr400 twinmos(Used to be Kingston ddr333)
1 maxtor pata drive C
2 seagate sata drives
1 seagate cheetah scsi drive
samsung combo drive
1 zip 100 drive
ati 9800 pro HIS
audigy 2
430 watts ps enermax

875 neo pc 3500 kingmax

Hello i have a 875 neo fis2 motherboard and a 2.8c intel p4, i placed both mosules in channel a the green one and my mempery scores are hell low in sandra im taking 2870 low. There set up for dual channel whats going wrong some one told me to run theese on a 1:1 ratio. Surely i should be getting faster speeds previosuly i had pc2100 installed i cleared the bios after insalling theee and there giving me problems and there no real performance increase from the old modules please help!

I Kind of Figured that is what was going on, when he Said He Put Both Modules in the Channel "A" "Green" Bank, But I was Trying to Be Sure, and get More info from him, as I was Having a little Trouble Understanding him robswift, and then he logged Off ...But arve121, You Must do as rob said, and Install the Memory modules, in the DIMM Slots By Skipping 1 Slot Inbetween the 2 Modules, So You Have to install 1 Module in the A-1 (Green) Slot, and then Put Module 2 in the B-3 (Purple) Slot ........Or you Can Put 1 Module in the A-2 (Green) Slot, and the 2ND Module in the B-4 (Purple) Slot, as Long as You Skip a Slot Inbetween, You Must Have it Like this For Dual-Channel DDR to Be Enabled...........Sean REILLY875

875 neo & 4200 memory problems

Hi, everybody. I did picked up a lot of usefull information from this bord, but was lucky enough not to run intoo problems untill now. Before recently I was using pc3200 memory and was able to oc it up to 450 (in auto mode) but that was the limit. When I changed settings from auto to 333, I was able to reach 260 on Cpu and memory read was still 400. Performance sucked, but it is not the question I want to ask, it was just for the sake of knowing that my 2.8 capable of 3.62.
The problem is that couple days ago I purchased ddr4200/533 by OCZ Technologies that supposedly is supported by 875 neo board.
When I set ddr frq auto, 500, 533 it will not boot, or boot with bios defaullts.
When I set ddr on 400 everything is just fine until I reach 250/500 on those settings it runs rock solid. But don't you know that it is not enough? As soon as I try to change fsb to 255-251(tried them all) it boots, starts loading windows and gives me a blue screen of death. Tried to encrease voltage, change latency, nothing works, the only settings that windows loads compleatly was 251/505 but it crashed in the middle of 3dmark3 back to blue screen of death.
I am quite willing to provide you with more extensive Bios settings of my system if you will just tell me what you all want to know. Any help will be greatly appreciated.

Unfortunately, This is a MAT / PAT issue.
You can try:-
Dynamic Overclocking: Disabled
Performance Mode: Slow
and memory timings of 3-4-4-8, but even at slow performance mode still affects your timings.
Quote
The problem is that couple days ago I purchased ddr4200/533 by OCZ Technologies that supposedly is supported by 875 neo board
This simply is not the case the 875P boards only officially support upto DDR400. The only board to support higher memory speeds are the 865PE Neo2-PS series.
I would use CPU-Z to verify your actual memory timings and Memtest to ensure your memory is actually performing as it should, but I suspect this is a mobo issue.
Join the club waiting for MSI to sort out a BIOS that actually works with this memory.

[875 NEO] Temperature issues

Hello everyone
I recently upgraded my bios to version 2.4 and now my cpu temps are showing a considerable increase in temp readings.
before I upgraded I was showing cpu at 27C to 31C (watercooled) now temps are around 50C.
Anyone know if bios 2.4 has temp reporting issues? I am using speedfan configured from the instructions on this board.
BTW I have the earlier version of the 875 Neo.
Thanks
einsteins

Quote from: WolfgangV on 26-February-05, 04:24:32
AAAHAA, I'm not a SpeedFan user myself, but I have read a lot of post pretaining to incorrect settings therefore resulting in incorrect readings on SpeedFan. Their should me a lot of Moderators and Users that can help you, if your settings have accidently change or what type of core or chipset or something like that.
My opinion "Long Live CoreCenter".
I also use Motherboard Monitor...it is giving me the same temp readings .....both of those apps worked correctly prior to the temps starting read wrong.
It was my thought also abut the settings (since BIOS is reprting the correct temp in the PC HEALTH section) ...and I did set up speedfan according to Danny's post.
[quote When you ran LiveUpdate, you made a RescueDisk right?
*Rename the 2.3 BIOS file to AMIBOOT.ROM
*Copy it
*Paste it into youre rescue disc, say 'YES' to overwrite
*Leave the disk in youre HDD and restart
*Follow the onscreen promts
Quote
I did make a backup and tried to boot with it but when I inserted the backup disk and started the computer it got just past the ram drive part and gave me an error.
I remember reading something about holding CTRL-HOME at some point in the process...maybe thats why it failed?
I will copy the 2.3 BIOs file to the disk and try again....anyone have any comments on the disk error by chance?
I am at work atm so I cant give the exact error message right now, but is just after I saw AMIBOOT on the screen below the loading ram drive part.
Thank you again everyone for all your help....
einsteins

ONKYO TX-SR805 Set-up Menu HELP Needed

This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know.
Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer. I will be hooking up 2 or 4 more speakers for the REAR.
Here are the settings on my TX-SR805 receiver on the set-up menu. I could use some help to see if they need set to something else.
2.2 Speaker Config
      Subwoofer       yes
      Front            70Hz
      Center          90Hz
LPF of LFE        80Hz THX
2.6 THX Audio Setup
       THX subwoofer YES   I don't know if mine is or not
       BGC                    OFF Not sure what this BGC means
3. AUDIO ADJUST
3.1 Tone Control
       Front    Bass      -1dB
                    Treble   +1dB
      Center Base      +2dB
                    Treble   +7db
     Subwoofer Base +7
3.2 DIRECT
      Delay Enable
      DSD                NO   Not sure what DSD is
3.3 MULTIPLEX/MONO
      Multiplex
      Input CH       Main/Sub
      Mono
      Input CH         L+R
      Output Speaker L/R
3.4 PLIIx/Neo:6
        PLIIx Music   (2ch input)
        Panorama        ON
        Dimension       +1
        Center Width    3
Neo: 6 Music
        Center Image   5
3.5 DOLBY EX
        Dolby EX        AUTO
3.6 THEATER-DIMENSIONAL
        Listening Angle   Narrow
3.7 LFE LEVEL
        Dolby Digital      -10dB
        DTS                     -10dB
        Multich PCM      -10dB
        Dolby True HD   -10dB
        DTS-HD Master Audio -10dB
        DSD                     -10dB
4. SOURCE SETUP
       CABLE/SAT
4.1 INTELLIVOLUME     +4Db
   .2 A/V SYNC            0 msec
   .3 NAME EDIT         Blank
5.   LISTENING MODE PRESET
5.1 DVD
       Analog/PCM      NOT SURE WHAT TO SET HERE
       Dolby Digital      NOT SURE WHAT TO PUT HERE
       NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
         CD                           ?
6. MISCELLANEOUS
6. 1 VOLUME SETUP
          Volume Display              Relative
           Muting Level               -40dB
           Maximum Volume       +10dB
           Power on Volume        -22dB
           Headphone Level        +2dB
6.2 OSD SETUP
           Immediate Display       OFF
           Monitor Type              16:9
           Display Position           TOP
7. HARDWARE SETUP
7.4   ANALOG MULTICH
           Subwoofer Input Sensitivity    0
7.5   HDMI
        ALL under here are     ENABLE
Solved!
Go to Solution.

I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
01-21-2010 08:24 AM
Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be. The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics. The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers. For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
Did your receiver come with an Audessy mic for calibration. I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
Your volume settings look fine again personal preference there is right or wrong.
For you listening mode Preset you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
I will have to make a second post since I can't go back and edit this one.

Armada 1580DMT BIOS Update needed

Hello from Bulgaria
I'm a HP Compaq user from forever and I've always been happy with the laptop products. I currently own a Pavilion dv6-1080eq.
I still keep the first laptop I got, it's an Armada 1580DMT. I want to bring this old fighter back to life, so I got it an 128mb ram module and planed to upgrade it. BUT it's not recognizing it. It sees only about 16mb of it. Along with this I seemed to have forgoten how to enter the bios setup.
I need a bios update, but I don't seem to be able to find it anywhere.
If you can give me a link from where I can download the latest firmware and some basic instructions on how to upgrade it, it will be great!
I've never used custumer support before and if you need some more information in order to help my case, I'll provide it.
Thanks in advance
Regards,
Yordan

That old girl is an interesting piece of hardware. As you suggest, there is a BIOS update that makes a major difference in computer performance. It raises the maximum memory the computer will see from 64 megs to 80 megs. Sorry to say, the biggest module it will use is a 64 meg EDO laptop module. They are very hard to find these days. A PC-100 or PC-66 module will fit but will not work. I suspect your 128 meg memory stick is in fact a PC-100 module. The 16 megs you are seeing is onboard memory soldered to the motherboard and would be available even in the absence of an expansion module. The BIOS upgrade allows a 64 meg expansion module to work together with the onboard. With the older BIOS adding a 64 meg module would disable the onboard memory, making 64 megs total. The BIOS upgrade also brightens the screen and allows full plug and play operation which is essential to running Windows 2000, which is the best OS for that machine, even though it is a tad slow with 80 megs. Win98 runs pretty well but is fully obsolete now in my opinion and certainly not secure on the internet. If I recall, Windows 2000 installs all needed drivers without any assistance. The last BIOS upgrade for that model is not posted on this website. Check this old thread from the Business User's Forum. Rainald posted a link to the BIOS you need.
Old Thread
I tried the link and it still works and Rainald even posted instructions on how to make the bootable floppy you need to flash the BIOS. I also think this BIOS update adds CD booting capability to the machine. It is the most effective BIOS update I have ever come across.

Help needed with 848p problem

hi allll
i have buyed new MSI 848p Neo and i have the following hardware
CPU: 2 GHZ 533 P4
Memery : 256 DDR 2700
GC: MSI 848 p
HD: WD 10 GB
when i connacted everting only the processer fan was working the hard drive and the CD doesnot work (POST)
if i unplage the Hard drive and the CD it will work (POST)
the problem is the Pc doesnot Post only the processer fan and i have blank screen ?
help needed
thanks

Try this.
Put your optical drives like CD-ROM drive to IDE 1 and set as Primary Master aka Master mode and put your HDD to IDE 2 and set as Secondary Master aka Master mode also.
Btw, what is your PSU specs?

Msi 875 Neo safe buy?

Hi bas
My two boys want to build a game-machine each, based on the 875 chipset. We 've been reading most of the posts on the 875 Neo (our favorite board so far after reading reviews), but it's not easy to decide, whether the board is a safe buy. Will it run on Kingston HyperX PC3500 with bios 1.0, which it probably is shipped with? If we use Win XP on NTFS, must we use the floppy/ramdisk method to upgrade the bios? Would you recommend a bios-upgrade to v.1.4 or should we rather wait for the next bios from Msi?
Regards
jfn

Quote
Originally posted by jfn
Hi bas
My two boys want to build a game-machine each, based on the 875 chipset. We 've been reading most of the posts on the 875 Neo (our favorite board so far after reading reviews), but it's not easy to decide, whether the board is a safe buy. Will it run on Kingston HyperX PC3500 with bios 1.0, which it probably is shipped with? If we use Win XP on NTFS, must we use the floppy/ramdisk method to upgrade the bios? Would you recommend a bios-upgrade to v.1.4 or should we rather wait for the next bios from Msi?
Regards
jfn
The board will probably ship with bios version 1.2, if you want to overclock, flash bios 1.3b2 onto it, else bios v1.4.

875 neo bios help needed

Similar Messages

Maybe you are looking for