875 neo v2 mobo live after switching off

can anyone help..this might be normal BUT im curious when i switch off my computer and it shuts down fully there is still power to my microsft keyboard ..if i press the "f" key i get the green light on ... also my 4 port mini usb hub is still lit up..now as i say this might be normal on this mobo but it wasnt the case with my 875 neo fis2r version 1 mobo ..any light on this subject is welcome

Quote
Originally posted by gmonster
Hey ...I have the same problem with my keyboard/usb ports being live after shutdown. Did you manage to get to the bottom of this? Eg is it normal?
Is is a bit disconcerting..to say the least.....but if it is normal I can accept it.....
Hi
Change your PSU, from the QTEC 550W...........
Honestly, I came here with 550W Qtec and was advised this.....I went to Enermax 365 and then Enermax465......I have not looked back.......
They cost twice a QTEC.......but when you think the Qtec PSU could BLOW whole system UP.........twice the price seems OK....
Your choice.........
Del UK

Similar Messages

Sound issue after switch off HDMI divice

I have installed video card and plug it to TV through HDMI divice, after switching off my TV i have no sound. message that no out put divice is installed.

Hi,
For the issue, please check your Sound setting.
Firstly, let us unplug the HDMI Device.
Meanwhile, please open Control Panel>Sound:
Please check your default sound device to see if it remains use HDMI.
In addition, let us use the Audio troubleshooter, it can diagnose and fix common sound playback and hardware problems.
http://go.microsoft.com/fwlink/?LinkId=260596
Keep post.
Regard,
Kelvin hsu
TechNet Community Support

Disk permissions changed after switching off FileVault

Hi,
I found my disk permissions changed after switching off FileVault, nearly everything belongs to "system" now.
Can anyone PLEASE tell me what permissions are standard for
-Desktop
-Applications
-System
-Libary
ore doesn't it matter anyway ????
Thanks a lot...

Assuming you're just talking about the Owner being System then:
The owner of Desktop should be your user name.
Applications and System should be System. Since these are not in your Home folder these permissions would have been corrected when you ran Repair Disk Permissions.
The Library folder depends on which Library folder you are talking about. If it's the Library folder that's in the same folder as System and Applications, then the Owner should be System, as well. Again, if that is not in your Home folder, then the permissions repair would have corrected it.
If, however, it's the Library that's in your Home folder, then it should have your username as the Owner.
Filevault only affects things that are in your Home folder so turning it on/off doesn't affect permissions anywhere else.

NOKIA 114 AUTOMATICALlY SWITCH ON AFTER SWITCH OFF

My nokia 114 working fine,no hanging problem but sometimes it automatically switch on after switching off,not always but randomly .i contact nokia care point and they update my phone twice but on change.is it the common sw problem of nokia 114 or is it my device hardware problem ? Is anybody faced with this same problem ?Plz reply any solution . . . . . . . . . . .

How often does the rebooting happen? Does it happen more frequently when your are running some specific application or function? Also what SW version is your phone currently running? You can check this by dialing *#0000#.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

ServiceLayer.exe 100 % after switch off cable from...

Hi all
I have problem with Nokia PC Suite.
WinXP S2
Nokia PC Suite 6.84.10.3 cz
non-nokia cable ca42usb
Nokia 3220
After i switch off cable from my USB port servicelayer.exe take me 100 % of PC process. I must CTRL+ALT+DEL and shutdown this process.
I try all. Close Nokia PC Suite, install new driver for cable, off my Nokia.
Thanks. Steve

It's a bug in PC suite 6.84.
Hopefully it will be fixed in 6.85 when it is released.
6.83 works fine and is far more stable and reliable than 6.84.

Word documents have disappeared from my desk top (macbook air) and cannot be found anywhere, happened after switching off and re-bootingk

Saved word documents have dissappeared from the desk top after saving. Problem seems to occur when laptop is switched off and then re-started. they can't be found anywhere e.g tried spotlight, recent documents etc. Help. Joe

First, you might as well address the two apparently-minor issues you found:
Some info on the Epson Scanner Monitor (via searching these forums):
http://discussions.apple.com/thread.jspa?messageID=8272208&#8272208
Not sure about the MS Word message, but it looks like you might need an upgrade. I'd check with Microsoft, or perhaps VersionTracker.com.
Ok, back to the original problem. Does the message have any other text (intelligible or not)?
Does it give you any options, especially "report"? If so, take it, then look via Console for a crash log.
What IS in the system log for the sleep/wake time? There should be a System Sleep, followed by a System Wake, and perhaps another line or two. Anything in that area might be helpful.

Audio during Call is muted after Switch-off of Pho...

1. Pair with Car infotainment system,
2. Connect as BT Audio & as a BT handsfree kit,
3. Switch off bluetooth without disconnecting (or unpairing) with Car's Audio Infotainment System.
4. make an incoming or outgoing call after phone's BT switch off.
Expected: Call should be normal.
Actual: Call is in progress but audio is muted from phone's speaker because Nokia 5230 is still assuming BT paired device presence.
Recovery: Phone switch OFF-ON

This is not how bluetooth is suppose to work and especially with such an awesome phone MBalmer. What bluetooth device do you have? Did you purchase your bluetooth device from? Let's try removing the connection with your bluetooth and phone completely and then reconnect them. Does the disconnection occur in certain spots? Are you using a special application for bluetooth? I look forward to hearing from you so we can get ths resolved.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

[915 Series] 915P After switch off - keyboard LED and mouse are ON

Hi,
when I switch off from WinXP, keyboard LED and mouse stay ON. Why? Any suggestions, how can i fix this?
Thanks (915P Platinum, latest BIOS, WinXP Pro)

ha... looks like MSI didn't do proper vaidation on either hardware or BIOS.
MAYBE the next BIOS will fix this, or MAYBE it's true hardware "feature". If that's the case, well, just live with it.

Sometimes my iMac starts with white lettering across the screen on a black ground and after switching off for a few seconds starts on ok ! Any ideas

Sometimes my iMac starts up with white lettering acrossthe screen on a black background - when it's switched off for a few seconds it starts up ok. Can anyone tell me why this happens ?

I have read on here that a PRAM reset can cure this problem:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Can I reinstall "Documents and data" in iOS 8 after switching off it?

I have not upgraded to iCloud Drive yet because I use an old Mac with Mavericks.
I've switched off the "Documents and data" option in Settings/iCloud, but when I've wanted to switch on it, that option has dissapeared.
I don't want to upgrade to iCloud Drive now, I just want to see my iWork data in "Documents in the cloud" in my iOS 8 iWork. "Documents in the cloud" is working in the Mac.
Thank you.

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt. Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Offline or Online Backup after switching off and on the archving mode

Hello guys,
I am doing an SAP (on Oracle) upgrade. In the upgrade guide there are two completely different statements about making a backup of the Oracle database during upgrade.
1st statement:
"If you deactivate archiving, you have to make a full backup of the database after the downtime before you switch archiving back on. This must be executed as an offline backup."
2nd statement:
"Backup: Database Was Operated in NOARCHIVELOG Mode
Activate ARCHIVELOG mode again and create a full backup of the database. This must be executed as an offline backup."
Quotes from: "Upgrade GuideSAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAPBased on SAP NetWeaver 7.0 Including Enhancement Package"
I understand the fact that the backup has to be offline if you do it before you activate archiving. This is logical.
1) Why does SAP do these two proposals before and after switching on archiving which are completely contrary?
2) Why does the backup has to be offline if you do it after switching on archiving?
May be somebody knows the background for this.
Thanks
Nik

Hi,
Two kind of Recovery play an important role in Database Recovery after DB Restore. The Database recovery can be Compete recovery, point-in-time recovery or partial recovery.
Media Recovery (due to media failure/corruption or loss of Data files) can be performed by applying all Offline Redo Log files which are generated from Online Redo-log file in Archive Mode.
Instance Recovery can be done with the help of Online Redo log file and undo table-space to achieve consistent status of Database. In this recovery the committed transactions (which are logged in Online Redo Log files) are roll forward and the uncomplete transactions (which are also logged in Online Redo Log Files) are rolled back into DB using Undo space info.
If you deactivate archiving, you have to make a full backup of the database after
the downtime before you switch archiving back on. This must be executed as an offline backup.
                   With Archive log Mode , one can deal with Media Recovery and Instance Recovery. Upon deactivating Archive log mode, the Archive log files will not be generated and the circular logging will take place within the group of online redo log files.
                   So, after deactivating Archive Log mode, Its recommended to take immediate offline backup to have consistent Backup copy of Database which may be required to deal with demanded media recovery by restoring that immediate latest offline Backup. If the database operates in NOARCHIVELOG mode, the database can ONLY be completely recovered from instance failure but not from media failure. This means that, in case of media failure you will lose all work done after the last valid offline backup. The database can be backed up only while it is completely closed.
                   Upon media failure after deactivating the Archive log mode (..rare chance, but we can not ignore it...),the complete recovery can not be achieved if the large time gape is there between the last successful offline backup and DB crash because between this time it may be the chance that the Online Redo log files are overwritten so many times in circular manner.

Lost internet access & printer settings after switched off airport extreme

Hi,
when I switched off my airport extreme I lost internet & printer settings. All other settings are OK. What`s my problem or what do I wrong?

please go to windows section and you need to provide more specific information to your problem.

IPhoto Albums have no visible content after switching off Photo Stream

Why does the contents of Albums within an iPhoto Library disappear when Photo Stream was switched off on aniPhone?

See if the following will show your original files in the library:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Error: cartridge not suitable for this printer after switch off and on

HI,
I have an officejet 6310 all-in-one. After printing and switching it off and switching it back on the next day, I get the message (translated from Dutch):
catridge error:
Rightside cartridge isnot suitable for this printer
Switching it off, removing either the right-hand cartridge or even both cartridges doesn't solve this issue. Anyone has an idea how to solve this?
Thanks in advance,
Ronald.

Hi - Not sure why the other link didn't work. Here is the URL to the document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00831987&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

875 neo v2 mobo live after switching off

Similar Messages

Maybe you are looking for