8750 printer will only print a small part of a photo what ever size paper I use and prferences

Is there a solution to printing as when I try to print a photo either in 6x4 or even A4 it still only prints a small section of the photo in one corner of the paper and after all preferences checked it still remains the same.

Hi there john2boy,
With the jam and print missing ink lets try downloading and running the HP Hardware Diagnostic Utility located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=408...
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

Select a document, CMD+P, and set the color options as shown here:

Printer will only print from computer won't copy from printer

My printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected.

Hi @sandylouise,
Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

HO D110 series printer will only print half of page get error

Ever since I got a new lap top that has Windows 8 my printer will only print half of the page and then stops. I get an error message. I have used the online Wizard and downloaded the new driver but it still won't work. Also can't print wirelessly still from other devices.

Hello mrshayes,
I saw that you have a new laptop with Windows 8 and now the printer is printing half a page and will not print any more. I understand you also cannot print from other devices. I have some suggestions for you.
First, try to make a standalone copy from the printer itself. If the copy is successful, the printer tests out okay. If the copy fails, try resetting your printer and ensuring it is plugged in directly to the wall outlet, avoiding power bars, surge protectors, etc.
Here is a link on how to reset the printer: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03177455
If the copy works fine, see if there is a Firmware Update needed: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02919168
Also, run the Print and Scan Dr. to detect any issues. This tool might fix the problem.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-126353-1
Please let me know if you run into any troubles and I will do my best to help.
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Printer will only print 10 pages at a time

Printer will only print 10 pages even if I ask it to print 33

Hi, are you printing from a mobile device or a desktop/laptop PC? What printer model do you have?
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Printer will only print for maps

Just bought a new printer. We are trying to connect and we get the following message. We get the message printer will only print from aps. We can print with the chord but not wireless. We have a envy laptop

Hi,
Please run setup on your computer (using the CD) and select convert from USB to wireless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MY PRINTER WILL ONLY PRINT OFFLINE

I have a 309a HP printer and it will only print offline. I have an HP computer, windows 7, 64 bit. Can you help me and thank you so much.
This question was solved.
View Solution.

How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen? Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Recently, when I try to Print from a web page the printer will only print 1/2 a page.

Recently when I try to print from a web page or e-mail, it will only print the left side of the page. My printer is a Photosmart Plus B209a.

This article should help resolve your partial pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printer will only print the first document then will do nothing.

I am running a dell system with windows 7 pro 64 bit.
I just got an HP LaserJet Pro 400 m401n printer.
I downloaded the most current drivers for windows and updated the printer from the HP website.
The printer will let me print the first document after the computer is restarted. Sometimes I can print a second document if I print it back to back with little to no time between printing the first document. If more than a few minutes passes and I try to
print again the program im using to print enters a "not responding" state and goes into recovery mode. This happens with notepad, excel, word, or even printing directly from the internet.
I can open the printer properties and see the document just sitting with "spooling" out beside it. I assumed it was a printer spooling problem and tried going to the Services.msc and checking the printer spooler. Ive started it and stopped it several
times. Ive also gone into %WINDIR%\system32\spool\printers and deleted all files in this folder. This does not help. It still gets hung at spooling.
Next I just went to printer property and turned the spooling off completely, by having it send the document directly to the printer. Again the exact same problem but instead of getting hung in "spooling" it now just hangs "printing".
I have also gone to the printer properties on the ports tab to see if disabling the bidirectional support was enabled as per a google search result showing a potential solution. But im connecting the printer directly to the computer via a usb port so that
option is not even available.
The only thing that allows me to print again is doing a restart on my computer, then again I can only print the first document sent. Restarting the printer itself does nothing.

Hi James,
Did this printer work correctly before ?
To verify whether it is related to the printer ,please plug it in another machine to have a check if it is possible.
Considering it is a USB device ,plug in with another port to have a check or try to update the USB controller driver or reinstall the USB controller driver to have a check.
Please check whether the Event Viewer contains errors or warnings related to this issue .
I found a similar symptom in the HP forum ,the solution in it may be helpful:
HP LaserJet Pro 400 M401dne print only one page (document)
(720 Views)
http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-LaserJet-Pro-400-M401dne-print-only-one-page-document/td-p/6456104#.VK5gLHkfrwo
You may need to look for help from the HP forum at the same time .
Best regards

Printer will only print letter size

I just installed the printer (Officejet PRO K8600). No matter what I do it only will print in letter size. This is even if I set up the printer in the program (ACAD LT or ADOBE PRO) as tabloid.

Hi there pds207,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Network printer will only print one time

the printer ( HP Laserjet CM2320 MFP) (Driver PCL 6)is networked on a print server running server 2012, the computer operating system is Win 7 fully updated, other people can print to it without issue.
the user can print to it one time. after the first print, you can no longer right click and chose printer preferences or printer properties. Then she needs to log out of the computer and back in to print again. if i have tried to open the printer properties,
they will open just before the computer logs out. this is the only printer she has.
things i have tried are removing and re installing the printer, uninstalling the all the print drivers on the computer, using the most updated drivers on the server and the computer. i also went into Printer Properties, ports tab, unchecked Enable bidirectional
support on both server and PC. checked after each change. also under the advanced tab i unchecked the Enable advanced printing features. both server and PC. checked after each change. when i tried to un-install the print drivers on the PC, i needed to rename
the reg keys because they were in use, remove the drivers and rename the reg keys back to the right name. i am sure i forgot some things i have tried, but if you need any other information let me know.
Any help would be appreciated!

Hi,
Regarding current situation, I suggest we check the spooler service or clear the catch:
How to Clear and Reset the Print Spooler Queue in Vista, Windows 7, and Windows 8
http://www.sevenforums.com/tutorials/89483-print-spooler-queue-clear-reset.html
After that, try to use following diagnostic tool:
Diagnose and fix printer and printing problems automatically
http://support.microsoft.com/mats/printing_problems/
If the issue still persists, please upload the printer log and application log here for our research:
Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

Printer will only print on new start-up

I have an HP Officejet Pro 8500A 910, connected to a Dell laptop. It used to print fine, but now has a problem.
When I first turn the printer on, it will print fine. However, if it sits awhile and the little printer screen goes blank, the next time I want to print, I get a message "Now Printing" and the litle circle goes round and round - but it will not print. If I turn the printer off, then back on again, it will print.

Hello metzger70,
Welcome to the HP Forums!
I understand if you turn off your printer, then on, it will print. How is this printer connected? Wireless or USB?
Please follow this HP document on The Product Stops Responding after Entering Sleep Mode or Power Save Mode. Make sure this printer is plugged into a direct wall, not a surge protector.
You want to make sure you have the latest Firmware on your printer. Click here to find out. If you printer is wireless, then try updating the Firmware from the Control Panel:
On the product control panel, touch the Right Arrow to display the second navigation screen.
Touch Setup, and then touch the Down Arrow to display the Web Services Setup Menu.
Touch Web Services Setup.
Touch the Down Arrow to select Product Updates.
Touch Check for Product Updates.
Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

My printer will only print the boarders of a document.

It wont print the information on documents.I've tried two search engines to do it(firefox and internet explorer).Also,I've reduced the security on them.I've even gone down the library to print other stuff off,with noproblem!Thankyou for any help in advance.

Terry101
Welcome to the HP Community Forum.
To a large extent, the difficultly can be related to the type of document you are trying to print -- and the application you are using to print that document.
PDF documents can be tricky -- sometimes, especially if you are trying to print these from the Internet, PDF files can be stupid-hard to print because the format is messed up.
You can take a look at the following - no garantees -- it might help you find something that will help nail down what is going wrong or maybe help you figure out a way to get what you need. For example, if all else fails, you can perhaps take a Snip of the document on the screen, save the Image, and print that. It is a sorry excuse for a workaround - but at least you end up with something on paper.
Manage Print Output with Print Preview
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

8750 printer will only print a small part of a photo what ever size paper I use and prferences

Similar Messages

Maybe you are looking for