875P Neo-FIS2R boot problem

Hello,
Just built a new machine with the following parts. Sometimes it boots fine, but mostly when you turn it on nothing happens, no beeps, no visual, no nothing. Also, once in awhile it takes 15 - 20 seconds before it beeps and visuals come on screen. It's using bios version 1.2 with all default settings by shorting out jumpers. (It gives different voltage settings when reset by jumpers vrs utility.) Once it boots it runs fine, even though memory timings are 2-4-4-6 SPD instead of 2-2-2-6 SPD that my memory modules are suppose to be. However when I manually change to 2-2-2-6 the bios shows that but CPU-Z still shows 2-4-4-6, thats a different story though which a bios update would probally fix. Right now all I want is for it to boot consistently, every time. Ive tried a different power switch and a different power supply. Neither helped and this is driving me crazy, somebody please assist or post any information you might feel would help.
Intel Pentium 4 2.4CGHz Processor 800MHz FSB
MSI 875P Neo-FIS2R
Corsair 512MB PC-3200/400MHz DDR Ram (TWINX512-3200LL)
ASUS GeForce4 Ti4200 128MB 8X (V9280 TD)
Integrated six channel audio on motherboard
Western Digital 80GB 7,200RPM 8MB Cache (WD800JB)
LITE-ON 16x/48x DVD/CD-ROM Drive (XJ-HD165H)
LITE-ON 52x24x52 CD-RW Drive (LTR-52246S)
TEAC 3.5" Floppy Drive               
Black Raidmax Case with 350W Power Supply (278WB)
CTX Executive 19" TrueFlat 1600x1200 (EX950F)
Windows XP Home Edition Full Install
Nice black and silver multimedia keyboard
Microsoft Wheel Mouse Optical
Intel 56K V.90/V.92 PCI Data, Fax, Speakerphone

Hey,
I have /had same problem with Neo 875 and corsair TWINX512-3200LL and bios V1.2 It has something to do with mem settings and/or Vdimm voltage. At this moment it boots fine but I can't explain way. It seems that this kind of memory is very sensitive for the Vdimm voltage. 2.5V is to low and some systems refuse to post. (see the bios 1.4 flash problems) Must user use 2.6v; 2.65v or 2.7v. Check out if you can find a stable setting. Bios v1.2 uses default SPD settings. you can't change them. Although after bios reset (removed battery) I get some different values with cpu-z. 2-2-2-6 I don't understand why I get those values in CPU-Z. I don't believe that my system is running with those settings. I think it's running with default bios 1.2 settings 2,5-4-4-6 but who knows?
A lot of users had dead MOBO's when they flashed to v1.4. The reason isn't found. Some moderators say the didn't wait for the DOS prompt after flashing (Could be) Some users can confirm they did. Maybe it has to do with the corsair memory. If you do a search you will find a lot of usefull information (bios v1.4 and/or MOBO hangs on keyboard initialisation)

Similar Messages

  • MSI 875P NEO FIS2R AGP problems

    I have just purchased an MSI 875P NEO FIS2R motherboard and there is a sticker covering the AGP slot which says "Please use only 1.5V AGP cards to avoid pernament damage to this mainboard". However, on the website it says here http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=434
    "One AGP slot supports 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V
      (3.3V is not supported)." I want to use 8x agp @ 0.8v and the website says this ok but the sticker on the AGP slot on the motherboard says only 1.5V. Is this a mistake on the website or on the Motherboard and is it possible for me to use 8x AGP @ 0.8V without damaging the motherboard?
    I want to use an ATI radeon 9800pro.
    Anybody using 8x agp @ 0.8V and have they have any problems?

    Assaf IS THE MAN!! His answers are NEVER WRONG.. WORRY NO MORE about the voltage...

  • 875P Neo-FIS2R & Maxtor Problem?

    I've installed a 80GB Maxtor S-ATA drive on friday and istalled Win XP on it. No problems so far. But when I booted the PC the next day I got lots of error messages regarding data loss when writing. And that all the time. :(
    Another thing is, when I go to my BIOS I can't lock my PCI/AGP clock to 34/67 when going to 250MHz FSB (5:4 ratio). If I do a BIOS reset and set everything and save it seems to work. But when I re-enter the BIOS, AGP is shown as high as 72MHz instead of 67. WHY? Is there a program I can use to look what clock I really have for PCI and AGP in Windows?

    Hi,
    i have the same hd mine works fine on the 875P
    the only problem i have is that my maxtor boots and works in UDMA5 mode only on both the intel & promise.
    Does yours show UDMA6 at boot up also i can set the agp/pci bus in the bios to 3 options 66/72/80 i am not to sure but if i remember correct before the maxtor hdd i could set it in 1 mhz increments but not now.
    farookh

  • Probems with msi 875p neo Fis2r and network controller driver

    Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
    I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine  with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
    --------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
        Computer:
          Operating System                                  Microsoft Windows XP Professional
          OS Service Pack                                   Service Pack 3
          DirectX                                           4.09.00.0904 (DirectX 9.0c)
        Motherboard:
          CPU Type                                          Intel Pentium 4, 2800 MHz (14 x 200)
          Motherboard Name                                  MSI 875P Neo-FIS2R (MS-6758)  (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
          Motherboard Chipset                               Intel Canterwood i875P
          System Memory                                     1024 MB  (PC3200 DDR SDRAM)
          BIOS Type                                         AMI (10/11/04)
        Partitions:
          C: (NTFS)                                         238464 MB (200326 MB free)
    --------[ DMI ]---------------------------------------------------------------------------------------------------------
      [ BIOS ]
        BIOS Properties:
          Vendor                                            American Megatrends Inc.
          Version                                           V2.4
          Release Date                                      10/11/2004
          Size                                              512 KB
          Boot Devices                                      Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
          Capabilities                                      Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
          Supported Standards                               DMI, APM, ACPI, ESCD, PnP
          Expansion Capabilities                            ISA, PCI, AGP, USB
      [ System ]
        System Properties:
          Manufacturer                                      MICRO-STAR INC.
          Product                                           MS-6758
          Version                                           00C
          Serial Number                                     00000000
          Wake-Up Type                                      Modem Ring
      [ Motherboard ]
        Motherboard Properties:
          Manufacturer                                      MICRO-STAR INC.
          Product                                           MS-6758
          Version                                           00C
          Serial Number                                     00000000
      [ Processors / Intel(R) Pentium(R) 4 Processor ]
        Processor Properties:
          Manufacturer                                      Intel
          Version                                           Intel(R) Pentium(R) 4 Processor
          External Clock                                    200 MHz
          Maximum Clock                                     4000 MHz
          Current Clock                                     2800 MHz
          Type                                              Central Processor
          Voltage                                           3.3 V, 2.9 V
          Status                                            Enabled
          Socket Designation                                FC-478
        Network adapters:
          Direct Parallel                                   5.1.2535.0
          WAN Miniport (IP)                                 5.1.2535.0
          WAN Miniport (IP) - Packet Scheduler Miniport     5.1.2535.0
          WAN Miniport (L2TP)                               5.1.2535.0
          WAN Miniport (PPPOE)                              5.1.2535.0
          WAN Miniport (PPTP)                               5.1.2535.0
     

    Quote from: Jack t.N. on 14-November-09, 08:00:05
    Clear CMOS with your PSU unplugged from A/C power.  Then load "Optimized Defaults" in BIOS and retest.
    thanks jimi... jack
    will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

  • 875P NEO FIS2R problems with booting at power-up

    Having problems with booting at power-up.
    Recently, with no apparent modification to system - at power up the system will often not boot.  About 80% of time systems seems to go into a loop with CD/DVD drive light blinking a few times, then the floppy drive light comes on and can hear the FDD run – within 30 seconds or so, this process starts over again.  Power switch LED is on and HDD LED is on (continuously).  All fans are running (power supply fan, case fan, CPU fan and Intel Canterwood 875 fan ).
    Monitor power on light is in power save mode (amber) when system does not boot.  When boot is successful the monitor power light turns green immediately.
    After pressing the reset button several times (varies between pressing reset button 1 time to 30 or more times) system will then boot OK or go into set up.
    Once running there is no apparent problem.
    This mainboard comes with D Bracket containing 2 USB 2.0 ports, and 4 diagnostics LEDs - when boot problem occurs the diagnostic LEDs, give a code that in the MSI mainboard manual states “Initializing Keyboard Controller” and diagnostic LEDs stays in this mode until via reset button provides a successful boot and start up.
    Have reseated all connectors.
    SYSTEM
    Mainboard – MSI 875P Neo FIS2R   (MSI 6758)
    BIOS – AMI v1.8 (has not been updated)
    CPU – Intel P4 2.6 GHz - system bus 800 MHz 512 KB L2 Cache
    Memory – 1.5 gb (2 x 256 mb and 2 x 512mb)
    Power Supply – Antec 380 watt
    HDD – IED WD 160 GB and IED WD 40 GB
    Video Card – ATI Radeon 9600 (128 RAM)
    Operating System – MS Windows XP Pro (sp2)

    Quote from: BOSSKILLER on 17-May-08, 03:34:12
    Have you done >>Clear CMOS Guide<<?
    Cleared CMOS - no change same problem.  Also, re-seated all connectors at same time.
    Quote from: Wonkanoby on 17-May-08, 09:06:54
    have you just added the second wd drive
    are they jumpered right
    jumperless if alone on ide
    jumpered master /slave if two on it
    No, second 40GB HDD was installed months before this issue started and is jumpered as slave drive.  Also, no other additional hardware installed for several months before issue.

  • 875P Neo FIS2R-Slow boot with Raid on Intel + Raid on Promise

    Hello all.
    Here is the configuration I'm trying to set up (and almost did)
    SI 875P Neo FIS2R,MS-6758 BIOS v2.4
    P4 2.6 GHz HT
    500W 6fan total
    2x1G Kit DDR 400
    2x74 G WD Raptor Raid0 (Intel S1-2) Win XP inst
    2x36 G WD Raptor Raid0 (Promise S3-4)
    GeCube X1600Pro
    DVD-RW (IDE 2 )
    Win XP SP2 (All latest updates installed)
    I followed the instructions as they are listed in the sticky (great job btw) and configured the 2 SATA 74G WD Raptor on Intel Raid controller(serial1&2) as Raid0 and install WindowsXP Prof sp 2 on it.
    Then I configured the  2 SATA 36G WD Raptor on Promise controller(serial3&4) as Raid0 and added this  Raid to the  existing WindowsXP installation.
    This set up is working very good once I'm logged into Windows with no problems at all.
    The glitch is that I need 3 min waiting time till I see the windows loading logo.
    I have all the latest drivers installed also IAA and INFs and my bios is as the default values except the changes mentioned in the sticky
    Onboard Promise IDE - as Raid
    ON-Chip IDE Configuration:
    Native Mode
    SATA Only
    Keep SATA Active - Yes
    Keep PATA Active - Yes
    PATA Channel selection - Both
    Configure SATA as Raid - Yes
    I did the Win XP installation twice till now, taking care to install INFs and drivers in the right order but the result is the same...3-5 mins till I have a fully operational windows environment and after that all is running like a dream.
    Now, I've searched in the forum and saw that many more people have the same problem but never read the solution to it, so if someone has ever found the way to solve this or has the same configuration please tell me how he did it. Even if someone knows that it can't be solved just drop me a line telling me so. Altough the system is running smoothly I find the 3 min waiting time unacceptable and frustrating. I've run out of ideas so please help me.
    Thanks in advance

    Hello Blazer and thank you for replying.
    Answering one at a time...
    are both raid arrays setup with the same stripe size?--> Yes Both arrays are configured at 16k stripes
    do you see both the intel and the promise bios setup screens?-->Yes both screens (Intel(R) RAID... and Fast Built (tm) ...)appear almost instantly after MSI's logo screen showing my Raid arrays in Normal status. The delay starts after the Promise's screen till the Windows Loading logo screen.
    how is the raid bootable drive identified in the boot from menu?-->
    Boot Device Priority:
    1st    BBS-0 (Raid): Intel <name>  (---> this is the OS drive on Intel controller)
    2nd   Disabled
    3rd    Disabled
    Try other boot devices  NO
    I have also the option to select the the Drive on Promise which shows as BBS-1 (Raid) FT 378  Ary 1  but I have left it out cause it doesn't have the OS on it.
    is the OS drive labeled as C: and seen as 200GB drive [as one] from the four drive array]--> No as it shouldn't cause these are two different Raid Arrays. The first Raid on Intel's controller with the 2x74G WD Disks indeed shows as one C: 137 G and has the OS on it. The second on Promise controller with 2x36G WD Disks also shows as one D: 70G.These are two separate Arrays with 2 disks each and they show as indented.
     is network boot enabled causing a delayed boot?--> I don't quit understand what you mean. In case you mean what happens  if I unplug the 2 disks from the promise controller then yes if I do that the system boots fast in the Windows even if I leave the Bios setting "configure promise as raid"!!!
    My problem is similar with this post: https://forum-en.msi.com/index.php?topic=69994.0
    other posts that have reported the same trouble:
    https://forum-en.msi.com/index.php?topic=94944.msg683258#msg683258
    https://forum-en.msi.com/index.php?topic=81901.0
    https://forum-en.msi.com/index.php?topic=66662.0
    https://forum-en.msi.com/index.php?topic=98005.0 ---> I wish it was that simple, I did it as with all other drivers
    I hope that info helps you helping me.

  • Is PXE network booting supported on 875p Neo FIS2R?

    Hi all,
    I have spent a full day trying to get my computer to boot via PXE from a remote server.  My computer is equipped with an MSI 875p Neo FIS2R motherboard.
    relevant stats are as follows:
    Motherboard: MSI 875p Neo FIS2R
    Ethernet Card: Integrated on Motherboard (Intel 82547EI (CSA Interface Gigabit LAN))
    The PXE server to which I am trying to connect is running Windows 2000 Server and is configured with Windows Remote Installation Service.  The server has been tested with another pxe client (my laptop) and I am able to boot over the network succesfully.  It looks like everything is configured properly on the server side.
    I am using the msi motherboard's Intel 82547EI integrated ethernet controller when attempting to connect to the server.  I do not have another PCI ethernet controller that I can try as an alternative.
    I could not find any mention of network booting in the boot sequence section of the BIOS configuration, nor anywhere else in the BIOS settings.  I have made sure the integrated ethernet controller is enabled in the BIOS.
    I also upgraded the BIOS to the most recent version (2.4) but there is still no sign of any 'network boot' settings in the boot sequence nor anywhere else in the BIOS settings.
    See the following webpage for the BIOS versions:
    http://www.msicomputer.com/support/bios_result.asp?platform=Intel&model=875P%20Neo-LSR/FIS2R%20(MS-6758%20PCBv1)&newsearch=1
    Note that BIOS version 2.2 specifically mentions:
    "This BIOS fixes the following problems of the previous version:
    - System cannot login to PXE server without floppy drive installed."
    This seems to suggest that the motherboard supports PXE.  While I do not have a floppy drive installed on my machine, this BIOS update indicates that a lack of a floppy drive should not pose a problem.
    When booting the computer I am presented with a few keystroke options, one of which is to press F12 for a 'Network Boot'.  After pressing F12 I receive no indication that the computer is attempting to contact a PXE server and the computer boots into Windows XP as usual.
    I have searched the MSI forums and have yet to come across a solution.  Signs point to there being PXE support but I must be missing something.  Can anyone give me any definitive answers here?  Thanks in advance.

    I've since been in contact with MSI technical support.  Oddly they cannot seem give me a definitive answer on the support of PXE in MSI motherboards so again I'm turning to you guys.  I'm really hoping someone out there has some experience with PXE and any sort of MSI motherboard.  Surely someone must have run into this issue before.  Anyone?  Anyone at all?

  • MSI 875P Neo-FIS2R support booting from USB devices?

    I am building a super computer using the MSI 875P Neo-FIS2R. I would like to either get a USB pen drive, or an external Floppy Disk Drive in place of an internal Floppy Disk Drive.
    Does anyone know if this board supports booting from a USB device?

    I ordered my board as well, however, they were out of stock and it may be as long as 2 weeks before they get more in. If you don't mind me asking, where did you get yours from? I am VERY much excited about getting this board as I only await the MB and CPU. What all are you putting in yours??
    Mine:
    MB-   Obvious
    CPU-  2.4 800Mhz
    RAM-  2 sticks, 256 PC 3200 XMS Corsair using dual channel, at first I think I will use the 512 pc3200 I already have though.
    HDD-  80GIG W/D 7200 RPM ( May get another to run RAID 0)
    VGU-  Chaintech TI4200 at 8x w/ 128 DDR
    CD#1- 52x cd rom
    CD#2- dvd 16x, cdr 48 cdrw24 cdrom 48
    500W raidmax Pwr Sup
    Koolcases Panther case w/ window and 3 80MM/ 1 60MM fans
    For now I will even use the old 3.5 A drive. Just in case.
    Red light internaly
    Digidoc 5 for thermal monitoring on:
    1.cpu  2.ram  3.VGU 4.case 5.HDD 6.other ram 7.chipset 8.dvd for curiousity sake. just curious of the temps they produce. but always able to move it to a more vital area if the need arises.
    Will be upgrading to liquid cooling in the future, that way when I am deployed the temps stay in the blue. (HOPEFULLY)

  • Problem with my 875P NEO FIS2R when tyring to use x4 Crucial 512MB DDR modules

    Hi all
    I have a problem with my 875P NEO FIS2R when tyring to use x4 512MB DDR modules. At first the system seem fine then it just hangs on me. All modules are exactly same and I have tried updating my bios and adjusting the settings but nothing works. My system is fine when using x2 512MB moduels. I have searched the forum and found no clear answer although there are other people with this problem. Please can anyone let me know if there is anything I can do with my current configuration to make the x4 512MB DDR work?
    From other posts I have learned so far that I either have to buy Paired modules from the manufacturer (which is no use because I bought my first x2 DDR a year ago) or only use x2 and now Dabs isnt taking the other x2 that I just bought because there is nothing wrong with the modules themselves (its the mobo).
    I built my system from scratch and wouldnt have been able to have done it without previous assistance so thanks in advance for any help

    Relaxing the timings will enable your RAMs to run at higher latencies so that they do not need to go extra mile to catch up with the transfer rates with the FSB.
    Lowering the frequencies is like underclocking a speedy twin turbo to a standard single turbine which means lowering of speed so that the RAMs can run lower than expectations which'll be able to provide room for o/c'ing back near to its original frequency.

  • 875P Neo-FIS2R File Copy errors loading Win XP Pro

    While installing WinXP Pro SP 1 I get file copy failures on random files two or three times during  the install. Retry succeeds on the file, but errors keep coming up after install randomly. Explorer crashes on logon, files are corrupt, etc. Tried two different MBs, two different CPUs, two different PSUs, two different sets of RAM, different IDE cables, booting from both DVD Drives, different Win XP CDs. I also tried the same with a Gigabyte 875 board and had exactly the same problem. With the Gigabyte board, if I ran the bus with a setting of 190 or 195 instead of 200MHz, the system ran fine, but then my 2.8GHz CPU is running at 2.66GHz. I can't go slower than 200MHz (but I did try 201 and 202; same errors) on the Neo-FIS2R so I can't find a setting that is stable and that's the board I'd like to be running. Any ideas about what's causing all of these combinations from running stable at a stock setting of 2.8GHz?
    Thanks.
    Mike Wolfe
    P4 2.8C @FSB 200, HT Enabled
    Corsair Platinum TwinX DDR400 2x256MB
    875P Neo-FIS2R Bios Version 1.8
    ATI AIW 9600 Pro 128MB No OC
    PowerUp 350W Power Supply
    WD2000JB 200GB; Master on IDE 1; No S-ATA
    Sony DDU 1621 16x DVD ROM Master on IDE2
    Sony DRU-510A DVD+-R/RW Slave on IDE2
    BIOS Defaults - 200MHz CPU Bus - DDR Voltage 2.7V
    On Board Promise Disabled; IDE Bus Master; P-ATA Only

    I am also having trouble with this on xp pro. When fully installed I get many random errors. New at this but have read that if you install a partition more than 137 gb data corruption may occur. So I partitioned the drive 20, 70, 70, and installed xp pro on the 20 gb partition. Per mb and hdd manuals I installed xp sp1. I am still getting random errors. This is the only hdd. Maxtor 160 gb ata 133 on ide1. Is it impossible to run the system this way? It gives me random crashes and stop requests. It also at one point gave me erros saying the cdrom memory is corrupt. Is the hdd drive sze possibly the problem?
    MSI 875p max fisr
    corsair twinx xms 333 1 gb
    ati raideon all in wonder
    samsung 352 cdrw
    antec 430w true power
    3.0 g intel p4

  • 875P NEO FIS2R repaired

    My board which died with BIOS 1.3 was repaired by the reseller today. I witnessed the process and thought you guys would like to know.
    This guy knew from experience that an 800MHz CPU wouldn't work when trying to get the board back to life again, so first of all he put in a 533MHz CPU (don't know core clock, but doesn't matter I guess)
    Then he took out my 2x512MB samsung PC3200 and put in a single pc2100 module.
    After that he put in this custom (PLC programmer?) card from MSI in a PCI slot and powered up. From the status LEDs on the PLC card he knew it didn't work. Power of and back on: success. Power off and PLC card removed. Power on and boot from floppy to flash BIOS to v1.4. Flash successfull. Power off and power on: dead. Power off, clear CMOS, power on: dead. Power off, remove PC2100 module and insert corsair module (don't know spec, but it had heat-spreader), power on: POST. Entered BIOS and load setup defaults. Reboot: POST. Power off, removed CPU & memory and put my stuff back. Power on: POST.
    System repaired.
    I asked if it is safe to mess with mem timings in BIOS v1.4. He said that it's possible that the board won't POST then, but that can be cured by CMOS clear and when needed only one memory module (no dual channel) to get the board to POST again.
    But I'm not going to try that. SPD is fine for me right now.
    System runs great again.

    I had the exact same problem with my new 875P Neo FIS2R, but after reading the post from Francois I tried my own little test.
    I was upgrading from a 2.26/533 system with 333 memory so, of course, I still had the old CPU and memory.  After being hung on the 'Keyboard Init' step on the D-Bracket after my 1.1 to 1.4 BIOS upgrade I swapped the old CPU and memory onto the board.  Everything worked fine!  I was able to see the 1.4 upgrade took fine.
    Afterwards, I removed the old stuff and put the new stuff back on and it still works.  I have no idea why, just thought I'd share.

  • 875P Neo-FIS2R & ATI All-In-Wonder 9800 Pro

    Newbie here, just not to computers...
    would like some help in diagnosing a problem on my NEW PC//all parts are brand new w/ 1st boot being yesterday//components listed below
    875P Neo-FIS2R
    P4 2.8GHz 800MHz FSB//cooled Turbotake Spark 7+
    1GB Samsung PC3200 - 512MB a stick in DIMM 1 & 3//cooled Turbotake Memory Cooling Kit 40mm Fan
    2 - Maxtor 120GB - Striped on Promise Controller on mobo
    Allied AL-B500E 500 Watts
    Fans out the ying/yang//stays very cool//does sound like an airplane taking off though
    My problem is since the first time on boot ithe boot screen, BIOS setup, Windows Startup screen and not quite as bad the Windows environment, the display is messed up//in POST it shows as black squares about every 1/2" all over the screen//Windows shows them, only smaller//now because this is happening during POST makes me not beleive it is the drivers//I have DL the latest from ATI//cannot find a firmware upgrade for the card//updated the mobo BIOS to v1.8//tried 2 different OS's//Win98SE & XP Pro//changed and tweaked the settings in BIOS all w/ NO JOY!!!//at this point I am getting a little upset//I really am hoping that I did not get a bum video card//I would have tried another one but I do not have one that will install in the new mobo
    Anybody got any ideas or experienced the same problem?... TIA
    hardRESET

    You guys are great on the fast responses!
    DOS, I did try the memory removal and that did not work.  The sound card is in my signature but is still sitting on the bench waiting installation, so that is not the an issue.  I did, however open my old box and checked it's AGP card and it is a Matrox 400 Dual Head.  I put it in and tested it and it works great, well not great, but it does not have the display issues that the AIW did.  My question is, do you think it is the mobo that cannot support the latest release from ATI?  Or maybe just a bad card?
    medafor, I had already tried that as well.  But thanks for the response!

  • 875P Neo-FIS2R Dead

    Hi,
       I just built a new machine with the 875P Neo-FIS2R, and it was working fine. I read that there were problems with the BIOS V1.3. Of course, I had to update my BIOS. I saw V1.4 was out and figured it was safe and fixed. So I used MSI's LIVE BIOS to flash the BIOS in Windows mode. I have done this before with my other MSI board and had no problems. The flashing process went successful, and asked me to reboot. Then when I did it never came back up. No video or POST beep. I tried switching out memory, clearing the CMOS, and even changing to my older GF3 card. Nothing worked. Can someone tell me what to do? I want my PC to work.... Again.
    Pentium 4 3.0C
    1 GB Corsair Twinx
    36 GB SATA Raptor
    MSI Neo-FIS2R
    Radeon 9800 Pro 256 MB
    SB Audigy 2

    I took out the battery and tried but it didn't work. Then I took a stick of pc2100 ddr out of my older machine and put it in, and it booted! Then I swapped out back to my new ddr 400 and it booted! Okay, so now when it boots, it says no BIOS installed and acts like I never had win xp on it. So thats alright, I can reload it, but My Cmos is like it was in 1999. Do I just load the defaults then fix it back to where it was and reload windows? Or do I need to slow down dram timings and reload windows and flash bios back to V1.2?

  • 875P Neo-FIS2R: Memory stays at 333MHz

    I recently assembled a new system with the MSI 875P Neo-FIS2R motherboard. The specs are as follows: Pentium 4C 3GHz 800MHz FSB, 1GB Samsung PC3500 Cas 2 DDR. The problem is I can't seem to get the memory to run at 400MHz, no matter what BIOS I use. The memory is capable of running at 433MHz with the tightest timings, yet I can't even get it beyond 333MHz. Please help me!
    Scott

    I bought the MSI Neo-FIS2R last weekend, together with a pair of Corsair XMS3500C2 256M memories & a P4 3.0C processor.  Darned expensive kit, but I was impressed with all the features on the MSI board, and I decided to go for the performance RAM to squeeze every last drop of performance out.  The Cosair modules are supposedly guaranteed to do 434MHz 2-3-3-7-T1.
    http://www.corsairmicro.com/xms/xms_modules.html
    My board came with 1.1 Bios, and I've flashed to 1.2 Bios.
    In my experience over the past week with this board, the Bios is totally hosed.  It just doesn\'t do anything.  I can get terrific boot screens, 3.6Ghz, 3.8Ghz, but nothing really happens as far as overclock.
    And the same thing is true for memory.  I can change the memory settings all I want to, and Sandra and Aida give the same results.  And, these results are not as good as the reference data for other 875P systems in Sandra and Aida.  It appears MSI bios is simply running these Corsairs at Bios default timings 2.5-4-4-8 and nothing I do can change this.
    Corecell does produce some overclock changes, but I don\'t like Corecell.  Computer bluescreens, have to clear CMOS.  Start Corecell again, bluescreen, clear CMOS.  Repeat until tired of this.
    Nice kit, but way too expensive for the performance I'm getting.  Hope they fix it, or this stuff goes back.

  • [875P Neo Series] 875P NEO FIS2R - Bootup delay with disk attached to Promise RAID

    Hi,
    I have a problem with my 875P NEO FIS2R mobo. I just added a 400GB SATA RAID-0 array to the Promise controller and now I get a 50 second bootup delay after the BIOS has run through everything and beeped and before the first WinXP splash screen.
    I boot up from a 160GB SATA RAID-0 array on the intel ICH5R controller. Both arrays work fine from within Windows. I have two DVD drives on the ICH5R PATA connection but nothing else on the Promise.
    If I disable the Promise controller in BIOS the delay goes away.
    I have tried disabling SMART, turning off the quick-boot option with no effect.
    When I first installed my system I tested performance with booting from a single SATA drive on ICH5R vs Promise and I noticed the same issue, but didn't care then because I only needed one disk so I just kept Promise disabled in BIOS.
    Any ideas how I can get around this?
    Regards,
    Jonathan

    Sorry I have been a away for a few days.
    Details requested...
    Quote from: redeyedog on 21-June-05, 05:50:27
    If the Promise controller was out of the picture (Disabled), and you have the SCSI adaptor and its devices setup:
    1. What is the adaptor's SCSI ID?
    7
    Quote
    2. List devices, position in the chain and their corresponding SCSI ID's.
    #7 Adaptec 2930CU card
    #4 Nikon Coolscan LS30 scanner
    #3 Umax Astra 1220S scanner
    #5 Iomega ZIP 100 drive
    Quote
    3. What type of terminination are you using?
    Adaptec card has auto-termination.
    ZIP drive has a termination connector attached.
    Quote
    4. Are the devices in the chain functioning properly?
    Yes.
    Quote
    I agree that your problem is your SCSI controller. There may not be anything actually wrong with it. The 2930 was an agressive controller card and its BIOS simply may not coexist with your motherboard's BIOS optimally. Even with the BIOS disabled, it may be competing with the motherboard's request for handlers.
    You may want to check to see if there is a BIOS update on Adaptec's website. Adaptec usually released 1 or 2 updates for each SCSI generation they produced. It may or may not help but we need to make sure you have the latest BIOS released.
    Unfortunately, this card cannot be reflashed.
    Quote
    At any rate, I think you have found the component which is responsible for the delay. I'm willing to assist in diagnosing the issue but I need you to provide the specific information I'm requesting.
    Also, try to do a CTRL-Pause to catch exactly what the BIOS version is and any other information which is showing up with the BIOS disabled. The SCSI adaptor BIOS, in fact, should not be enabled in your SCSI configuration as you have described thus far.
    Adaptec AHA 2930CU SCSI BIOS v1.34.1.
    There seems to be a difference between BIOS and host adapter BIOS. You always get the BIOS screen, but you can disable the host adapter BIOS if it is not required.
    I am pretty sure it is not the SCSI chain that is wonr because the pause happens with nothing connected to the card.
    Jonathan

Maybe you are looking for