875P Neo - LSR BIOS???

875 LSR ver board - bios download??????????????????????????

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=434&kind=1

Similar Messages

  • Overclocking an MSI 875P Neo-LSR Bios 2.2

    Here is my configuration :
    CPU : Intel Pentium IV 3.2C 800Mhz HT
    RAM : 1Gb [2x256MB DDR-400 PC3200 Infineon] + [2x256MB DDR-400 PC3200 Kingston]
    GC : Club 3D Radeon 9700
    MB : MSI 875P Neo-LSR Bios 2.2
    HDD : 120 Gb Maxtor 8Mb cache + 40 Gb Western Digital 2 Mb cache
    CPU Fan : Zalman CNPS-7000AlCu
    Yesterday i tried to use CoreCenter and went to 215MHz (3.6 Ghz i think) with no hitch.
    Now my question is with this configuration what can i reach and what to use (CoreCenter or Bios) ?
    And which OC for the memory ??
    Tx

    I think use bios is better because of more flexibility. You can go up to about 3.5GHz.
    please read:
    Overclocking Guide

  • Where to find M.A.T. in BIOS of a 875P Neo LSR?

    Hi y'all!
    Currently I'm using:
    P4 3.0GHz 800MHz FSB
    2*512MB Kingston HyperX PC3200 CL2
    MSI 875P Neo LSR (BIOS v1.6)
    I'm wondering where I can enable P.A.T. or MSI's M.A.T.?
    After reading something about BIOS version 1.6 enabling M.A.T. , I flashed from 1.2 to 1.6.
    But where can I find this new option in my BIOS??
    Thank's :]
    Best regards,
    Arjan

    Okay... Okay... This is generally for MSI, no reason to take offence.. anyone. Or maybe just the guy who never used computer(apparently) but designed BIOS for this board.
    I Have NEO FISR2 motherboard, and the problems I have seem to be something like people here have.
    PAT isn't enabled if you overclock. What ever you do, Ultra Turbo or turbo.. nothing helps. Is there a reson for this?
    If I drop memory to 333 and raise FSB, should the numbers in BIOS at memory speed show what it actually is, never have done so... And if I raise FSB and memory speed is at 400MHz why isn't PAT enabled, memory isn't overclocked?
    If I try to change manually setting for memory, like cas etc... Should it do something, or are these there just for fun, so you could IMAGINE the effects on your board.
    Almost all memory related settings are in BIOS for some other reason than adjusting setting on this motherboard, they don't affect anything. At least not for me. Maybe I was wrong thinking this board could be user for overclocking, those volt settings propably are there for show too. Nothing to do with overclocking, because you will never get everything out from this board. At least not if BIOS is working like this.
    I did simple test, raised volt for memory to 2.90. Whopee. Raised FSB to 230, and left the memory setting at 400MHz. Changed by hand Cas setting to more relaxed ones.
    Quess, which changes of these actually did something? FSB and Volts. For some unbelievably stupid reason board changes automatically both CAS(VERY RELAXED) settings and memory setting. Try Sandra, see for yourself.
    Please, let me know if I'm doing something wrong, this is new board and new BIOS, maybe I'm missing something...
    OR this is the most lamest try I have ever seen to put out decent BIOS. Nothing makes sense, thank you very much for wasting hours and hours of my time while I was trying to figure out why everything didn't work like I expexted, after all, there where so many "pretty buttons to press" that did nothing.
    ARGH! X(

  • MSI 875P Neo-LSR

    I have a MSI 875P Neo-LSR.  I installed Windows XP sp1 and everything in my computer.  All of a sudden it doesn't recognize my CD-ROM Drive.  It doesn't let me eject the drive.  I see the CD-ROM Drive in the bios, but not in Windows. What could be wrong? I also have the keyboard controller light in the USB indicator bracket light up sometimes I reboot the computer and it locks up.
    Motherboard:   MSI 875P Neo-LSR
    Memory:   1GB Corsair DDR-400 Dual Channel
    Video Card:   ATI 9700 Pro 128MB
    PSU:      Antec TRUE550 550watts
    AMI® BIOS:   1.3

    Goto safe mode and delete the driver. Sometimes when you install SP1 it duplicates the drivers instead of updating them. Once you delete the driver restart into normal and it will reinstall the new driver for the cdrom.

  • 875P Neo-LSR Setup problems

    I posted this message last night but I think it got lost in space.
    My System
    MSI 875P Neo LSR
    Intel 2.4C with H/T
    2 X 512 Infineon memory sticks
    Enermax 350W P/S
    ATI AIW 8500DV
    Seagate S ATA 120 H/D Partition with 85/35 partitions on SER1
    Western Digital P ATA 80 H/D on IDE 1
    LG 52 X CD ROM on IDE 2 primary
    LG DVD/CDRW Combo IDE 2 slave
    19 Samsung Syncmaster
    I am having problems with my new 875P LSR.  Installed O/S and software using FAT 32 and it wiped on 2 occasions.  Could not boot up trying all the sugestions on the web. Using Partition MAgic rescue disk I could still see the drives and was able to check for errors but when I used my old 98 boot disk C: came up with a message of invalid media but D: was still readable?  During both  the previous setups I used the F6 option and loaded the Intel raid XP driver for ICHR, was this the reason for my loss of system.
    On my third try I used the same partitions but did not use the F6 option and also formatted in NFTS (by accident).  Everything appeard to be working so far BUT!!!!!.  I don't want the system to do over clocking I just want a secure setup for stability in normal use. I do not play games, I use the inter4net, edit my home movies and normal word processing,
    Questions
    What am I doing wrong?
    What should the cofigreration for the bios onboard ID chip be. I have Mine set in Native mode, P ATA + S ATA, NO, NO, Both, S ATA 1st channel, S ATA PO1 PO2 Raid NO
    Do I need to use the Intel IAA driver -or- does XP have drivers -or- do I have to download some other driver or controler for the S ATA.
    Can anyone suggest a better layout for my system and how can I tel if the computer is operating with the proper drivers for S ATA, P ATA, H/T and all the other gagets on board.  Any suggestions and advise will be appreciated
    Swan705 in Ontario Canada

    Hi back
    Thanks again for the response, followed your instructions now I show a 82801eb under the controler section.  Is that all I needed?  Another question I like to keep a copy of windows 98 se on my other drive and would like to use the F11 key to boot to it.  Is there a procedure of installing it so I don't screw up my XP system.  I use a disk tray to keep the drive in so I can take it out for safety as I also store backups of my personel files on it.  Your sugestions are really appreciated.   Swan705

  • Replaceing NB fan with heatsink (875P Neo-LSR)

    I'd like people's opinion on wether or not you think a Zalman ZM-NB32J North Bridge Heatsink will be enough to replace the NB fan on an MSI 875P Neo-LSR. I would hate to damage the board.

    Quote
    Originally posted by Oddish
    Just so I don't sound like a smurf: I meant to replace "loud" with "noisy" in my previous message, not keep both words. Hmmm... I wonder why MSI is afraid to let people edit their messages.
    I have been using MSI boards for a year or so now and the northbridge hsf unit has yet to disapoint me. Do not bother replacing the NB HSF unless it does indeed fail as you will lose your warranty if you replace it.
    Scott

  • MSI 875P Neo LSR Dead??

    Hi y'all,
    Saturday 12th of juli I've bought some components:
    - Intel P4 3.0GHz 800MHz FSB
    - MSI 875P Neo LSR
    - 2*512MB Kingston HyperX PC3200 CL2
    - Hercules 3D Prophet 9800 Pro
    - Iiyama Vision Master Pro 413
    After installing the whole bunch, I tried to boot the system but nothing happend!
    So I waited for about 5 min. and booted again. This time almost succesfull but..... the only parts that were working are my fans (casefans, cpu-fan and the Northbridge-fan).
    The powerswitch wasn't working (and it was installed correctly). I had to power the system via the powerswitch on my powersupply. So my guess was that my mobo was dead!
    After returning the mobo back to my retailler, they concluded that it was dead indeed, so the gave me another mobo.
    So after installing the new board, I tried to boot again, but still no succes so far.
    My retailer tested the board again and it was also dead.
    Some symptoms:
    - Active fans
    - No HDD, floppy and DVD-player/Burner activity
    - Blank screen (display in standby)
    - Instant power on when I turn the switch on on my powersupply
    I've tried different videocards, memory modules and clearing the C-MOS, bur nothing seems to help ;(
    Can you please help me out????
    Thanks
    Best regards,
    Arjan

    With regard to the motherboard stand-offs, motherboards dont always use the same amount or in the same position (the stand-offs are movable -either bending out of brackets in the case or unscrewing)
    Always check ALL the standoffs line-up with screw positions for your moterboard before fitting, a wrongly positioned post can short-out PCB traces/pins
    Another easily overlooked item is the square 4 pin 12v connector (older type power supplys dont even have one), the 12v power connector is located by the northbrige/AGP socket (the CPU will not start without this fitted)
    Sometimes when physicaly altering a computer the reset or power-on (start) switchs dont line up correctly with their buttons -this can cause the switch to be permanently "on"
    The power-on switch will cause the computer to "cycle" (constant restarting) and the reset switch will cause the computer to hang with-out initialising -try removing the reset switch connector from the motherboard
    If none of those are the problem i would suggest trying a different power supply -or maybe your dealer could check the one you are using at the moment

  • MSI 875P NEO LSR versus Corsair TWINX

    HI,
    I'm about to purchase the following parts:
    Mainboard: MSI 875P NEO LSR
    Memory: 2 sets of Corsair TWINX 1024PC3200LL (2*512MB).
    Is this mainboard capable of handeling 4 modules of the above memory?
    I've also seen modules from GeIL, are they any good?
    The module i've seen are: GeIL PC3200 Ultra.
    I want to run my memory at the following timings: 2-2-2-5T
    I believe Corsair is capable of that, but I'm not 100% sure if GeIL is. Atleast my retailer told me so.......
    Can you please help me on this one? ;(
    Regards,
    Arjan

    Quote
    My Corsair TWINX 3200LL runs fine with 2-2-2-5-8 settings at 400 mhz
    Ok, that's good to know
    But do you know if the MSI 865 or 875 mainboard can handle Corsair TWINX 1024PC3200LL (2*512MB)? Because it's not mentioned in the memory.pdf file.......
    Quote
    It may, or it may not, it just depends, running all 4 modules seems to make it harder to run at tighter timings.
    Ok, so to achieve tighter timings, i'd better use 2 modules of Corsair TWINX 1024PC3200LL (2*512MB).
    It's not cheap by the way..... it costs €375,- here in Holland. So that's why I want to know this memory ''thing''.

  • MSI 875P Neo-LSR & Northbridge Cooler

    Hi
    Hi have a MSI 875P Neo-LSR motherboard and the northbridge cooler is making alot of noise!
    I've already cleaned the dust from the fan, added some oil but it stills makes an anoying noise
    My question is this:
    I don't want to spend €€€ in a new cooler because i'm upgrading my system in a few months so, will my motherboard survive without the cooler? But remaining with the heatsink...
    I have a Thermalright XP120 with an 120mm fan in my CPU, which are very close to the northbridge, they might fresh a little the NB... And i got a good airflow in my case...
    My MB:

    Thank you for your answers! 
    Do you know the maximum temperature that the NB can get? Or the normal one...
    I want to test if it's not getting to hot without the fan 

  • 875P Neo FIS2R BIOS RECOVERY

    Has anyone tried (I should say needed to try) the BIOS recovery feature for this board?
    I've probably flashed my motherboard 10-15 times this week trying different settings and combos.  I got my new Kingston HyperX 3500 1GB Dual DDR434 kit and started re-tweaking my machine.  Finally after using 1.74 for two days, it just would fail to boot.  Powers up, but no POST.  Resetting CMOS, and all other tricks failed.  I even tried putting back in my Samsung CAS-3 memory to see if it would boot up.  No go.
    I tried the BIOS recovery procedure as follows.  Rename your bios to AMIBOOT.ROM and put on a disk.  Hold CTRL-HOME to force the flash.  Well I tried this about 20 times, using different floppies, drives, and cables until I was ready to throw the board in the recycle bin.  
    I decided that I would give it one last try about 2am this morning.  I tried using the 1.74 BIOS as the recovery ROM, instead of the BIOS I wanted to replace it with.  Worked like a charm.  I don't know if the bootblock of the BIOS is different or what, but maybe it will help others unfortunate enough to suffer the same tragedy and kill their 875P Neo.
    I am back up and running with v1.5 which seems most stable to me versus the other revs and I've tried them all three times or more (1.0, 1.1, 1.2, 1.32b, 1.4, 1.5, 1.6, 1.74b).  And although I am not able to eek out any more mhz from the box, I can run tighter timings and the system gaining about 400 points in 3dMark2001.  And it DEFINITELY seems more stable than ever.  But I'm sure it's just my imagination  :P

    Yeah ive been considering going back to 1.5 to get rid of the crappy performance option (unstable overclock on the AGP/PCI and graphics card)
    Does 1.5 enable PAT? ...i never managed to test this myself (Its the only option i need from performance modes)
    I havent had the pleasure of the recovery mode yet (touch wood) ...and good job on making it back!!  :D

  • MSI 875P Neo and Bios Version 1.6

    I have an MSI 875P LSR Board.  It works fine but the system temperature is always running at 50-60 degrees C.
    I am running bios version 1.2 and I was wondering if it is worth while to upgrade to version 1.6 as my system is stable.  I dont feel really comfortable flashing the bios I am running Windows XP with NTFS partition.

    Maesus-how much lower do you feel the "real" temperature is? Would perhaps 10C be a fair estimate? I'm still waiting for my friend to dig out his thermal probe so that I can get an accurate reading. I too am still using bios 1.2(rock stable with excellent game play)but am considering a bios upgrade if I purchase faster memory which I'm not sure that version 1.2 would make full use of.

  • 875P Neo-LSR/ FIS2R died after setting perf. mode to turbo

    I work with my computer about 4 years in same basic configuration (p4 2.8, 2x256 ocz pc3700 and 2x256 mushkin pc3500) always running in 400fsb. Yesterday i decided to play with those performance modes in bios to check the maximun i could get out of memories latencies. OCZ spd is 2.5-7-7-9 and mushkin i think it was 2-5-5-7, but i always work without problem setting manualy to 2.5-5-5-8.
    So yesterday i changed the performance mode from fast to turbo mode and the computer was working ok.
    Then i restarted and changed to 2-5-5-7 and perf. mode to ultra turbo. After i saved the configuration in bios, my computer stoped to respond. The computer remain on, HDD led on, but no post screen and no beeps in start up.
    I already tried to clear cmos a lot of times, but it doesn't work. No beeps or screen on startup. It's like when u turn your computer on without the processor on socket. I did this without all periferals and still same result.
    Does i have any other way to clear cmos to default configs?
    Now i'm waiting the answer from the tech assistence store to know if my mobo or my processor is damaged.
    Anyone have any idea about what could i try to bring my computer back to life?
    thx and sorry about the bad english.

    OK, so you tested everything.......
    Had same issue a fews back with 875P
    My advice, look for a replacement 478 retention bracket. I used to sell them but, alas no ,more.
    Sounds like you may have socket sag............. the back plate will provide extra support........

  • 875P NEO FIS2R bios flash ?

    Can I flash the bios without loosing data from the promise raid controller?
    HT

    should have no effect on it at all
    its bios is in the main one but they say in the update if altering it normally

  • 875p NEO-LSR SATA RAID problems

    Just got a machine build today. Every so often the Intel SATA Raid bios reports one of the drives are missing. (Same drive everytime i think) If I press Ctrl+Alt+Del it shows back up and I can continue booting windows. I have bios v1.6. It seems to happen when I let the machin sit idle for a while then reboot. If I reboot as soon as I get into windows it will not reproduce. It has happened about 4 time now.
    Specs
    P4 3.0c
    Corsaird TwinX LL PC3200 (2x256MB)
    Gigabyte R9800 Pro 128MB
    2 Seagate SATA 160GB Drives
    350W Antec PSU
    Aopen CDRW/DVD
    WinXP Pro SP1

    Update.
    I tried the drives in my IC7 and the problem went away. I swapped power supplies (used the enermax from my IC7 system) and the problem still occurred. Is there anything else I can try before I request an RMA?
    Thanks, Justin

  • Mobo pt 880 neo lsr - bios doesnt recognize seagte hd

    Hi There,
    i´ve a MSI pt880 mobo,with 2CD-Rom , 1 Zip Drive ,and FDD and 2 Seagate 120GB SATA HD. and i cant seem to make the MOBO recognize them .
    When i start the computer , and run the RAID aplication , it recognizes them i´ve managed to pair them in raid 1(one as sorce and the other as mirror) . when i start to install the windows XP, on the first  times i installed the scsi /sata drives trough F6 and i started to install windows, it copies the initial windows setup files reboots and then... apears an error (hardware malfunction...contact microsoft support, install drivers,etc...
    i´m going nuts,here please help me . i think i´ve tried everything except update bios.
    [email protected]

    Flash your BIOS to v1.5, if it still doesn't works, PM me with your return email.

Maybe you are looking for