88 Software Dependencies Imported Into CMS Track

We are experiencing problems when associating SCs to a Track in the CMS. When any of the SCs are selected, it shows a total of 88 dependencies when only 3 are defined in the SLD (SAP-JEE, SAP_BUILDT & SAP_JTECHS).
The "Update CMS" action to pull in the SLD changes does not fix it and communication between the SLD & CMS appears to be fine. As well, this was working but just recently began acting this way.
Has anyone experienced this, know what would cause the inconsistencies, and/or know how to fix it?
We are unable to create new Tracks due to this, so any assistance would be greatly appreciated.
Many thanks,
Lane

We've been working with someone at SAP America to track down the problems and find a solution. From our research it appears this is related to either an incorrect CIM import or manual assignment of usage dependencies for the 3 primary software components mentioned earlier.
We are in process of either re-importing the CIM for the current patch level of the SLD and/or manually removing the dependencies from the SCs. I will update after this is complete and we have the results.
Pascal, thanks for posting interest in this message.
tlb

Similar Messages

OutOfMemoryError during ESS import into CMS

All-
I have configured my NW server using the JDI-DTR-and-CBS config template. I have created a track and I have successfully checked in the pcui_gp component into my dev environment. But whenever I attempt to import the ESS package, I keep receiving an "Java.LangOutOfMemoryError" in my defaultTrace.
Has anyone else encountered this? Did you have to modify the "delivered" config template settings?

Bharathwaj-
Thanks for the response. I had already done this without success. Have you been able to import ESS with a 1024 heap size?

Import the SAP CRM ICSS 5.0 into a track

Hello CRM People,
we are try to import the CRM ICSS5.0 application into the development track, But in the transport studio we are not able to import the actual physical icss5.0 component.
We dont know where we went wrong, Please can any body let us know how to proceed with import the icss5.0 into a track in CMS,
Thank you in advcance,
CRM AM

Hello Dinesh,
I suppose you meant everything is grayed(all fields) please let me know otherwise.
For what category are you creating the material? is it a configurable?
is the 'assign' button in the Sales and distribution tab is also grayed?
regards,
Muralidhar Prasad.C

I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Difference in AE file Imported into PPro with MPE in Hardware vs. Software Mode

I am getting an undesireable result when importing AE files into a PPro Sequence with MPE in hardware mode. The top (or left) pic is accurate, with MPE in Software mode (nice soft glow). In the bottom pic, MPE is in Hardware mode. Note the undesireable (and inaccurate) harder glow. These AE files are output in an uncompressed AVI with alpha channel. The pics below were imported into PPro with the AE file placed over a black clip in PPro (Video Layer 1=Black. Video Layer 2= AE text w/Alpha). Any thoughts, or better yet, solutions?!

   Jim, so you're suggesting that I create my graphics in PPro instead of AE? That's not going to work! I must be one of the few people out there that output AE files with an alpha channel and import them into PPro, for I can't imagine Adobe not addressing this if many people were using AE & PPro together in this fashion. I guess I'm stuck having to continue to use MPE in software mode only (alpha channels work perfectly in this mode, but I have to do a lot of rendering.). I used to blame Matrox for this problem. Sure glad I haven't upgraded to a Titan!
   BTW, I get the same undesireable results in MPE Hardware Mode when using Dynamic Linked Comps to AE.
   One last question: does the quality of the video card make any difference with this alpha channel problem I'm having with MPE? I'd buy a Titan card right now if that would solve my problem!

Can't import JEE, JTECHS, BUILDT into DI track

Hi all:
We are implementing ESS enhancement. We need to import JEE, JTECHS, BUILDT into the track. but the track can't recognize the SCA files in the folder. Our DI is 7.0 and the SCAs are 6.40. Anyone knows why? Please help me!

Hi,
If you are using DI 7 then why are you using SCA 6.40? you should get SCA 7, you need to bring all the components on the same level to let everything work smoothly, i think this is the main reason that DI is not able to recognise them, you can easily get SCA 7 on https://service.sap.com,
And yes i am asking you first to deploy those SCAs from SDM, it is necessary.
Regards,
Ameya
Message was edited by:
Ameya Pimpalgaonkar

Importing audiobooks: how to join all tracks into 1 track?

After importing several CDs from an audiobook, I have MANY tracks (each imported cd). How can I get all these CD tracks into one track? When an audiobook is purchased you get the audiobook on one track. How can I accomplish this on my Mac OSX with iTunes 10.7? Is it even possible? Thank you in advance for any assistance.

Check out Doug Adams' Join Together.
Also, 3am Coffee's offering a bunch of scripts that will do the same thing, but unlike Doug's, these guys want $10.
Lita

Im unable to import an mp3 track into garageband. I used to be able to just click and drag into GB. Advice please?

Im unable to import an mp3 track into garageband (version 08). I used to be able to just click and drag into GB. Advice please?

Arch Blr wrote:
Im unable to import an mp3 into garageband
http://www.bulletsandbones.com/GB/GBFAQ.html#filewontimport
(Let the page FULLY load. The link to your answer is at the top of your screen)

2nd audio track at 12-bit lost when importing into FCE?

I have got some DV-tapes with finalised movies which I would like to import into FCE for a) applying some enhancements and b) then burning them onto DVD. These movies once were created with FCE but after they had been exported to DV-tape (in 12-bit manner) some additional audio was added, directly via camcorder. The issue which I have got now is that although I can easily re-import these movies into FCE, the additional audio does not appear in FCE. Also, when directly checking the imported files in FCE's Capture Scratch by using the Quicktime Player the additional audio is not there.
I tried importing into iMovie and here (as opposed to FCE) the complete audio is available, both the audio originally composed via FCE and the additional audio which has been added afterwards via camcorder. Unfortunately iMovie will crash multiple times at importing due to the large number of individual clips, btw this is the reason why I once had to give up working with iMovie and bought FCE.
Anybody has an idea how I can import into FCE the movies along with the entire audio, or is this a weak point in FCE? In case of the latter, anybody has an idea for a workaround?

"Do you have an idea how to fumble out the 2nd audio pair at a Sony TVR900 i.e. how to proceed corresponding to your advice "configure the camera to ouput the second stereo pair to another DV camera with it's audio set to match the existing"? Or did I misunderstand your advice? The user manual of the Sony camcorder is ridiculously poor.."
The user manual of course is the best (should be) place to go for info on how to operate your camera. Might be one of those direct to English translations.
My idea is to use a camera that can access the 2nd stereo pair seperately. Then dub to another camera. Usually this is done via a switch or menu system.
That's where that camera manual comes (should) in handy. Also, some cameras allow you to MIX the four tracks, if this feature is available, you could dub the MIXED audio (all four tracks) to another camera.
"e.g. iMovie (provided it does not crash)? Because then I could capture the missing audio pair 2 like that in a separated manner and import it into FCE?"
iMovie to FCE is not my first choice as the importing is accompanied with quirks of all sorts, the audio is multiplexed with the video, the audio will always need to be rendered as well. Use it as a last resort IMO.
I have have heard of third party applications that can do this job, sorry, can't recall the details.
Al

How do I get track names for a CD imported into my Itunes?

I am running itunes 11.1.3 (8).
I can 't find the command to get the track names for a CD I just imported into my itunes.
This used to be simple....
Any suggestions?

It still is simple, but as always you get the track names before you import the CD. iTunes has a preference setting so it will always do that or you can re-identify a CD using a menu item (see below). Once they are imported there is no way in iTunes to get the identification service to work. There are third party services that work outside of iTunes but for a single CD it is easier to just reimport the whole thing after correctly identifying first.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html - "iTunes Library Extras.itdb contains some Gracenote CDDB information."
To re-identify an incorrectly identified CD: "Insert the CD and select it in iTunes, then menu Advanced > Get CD track names. It should requery the Gracenote database and let you pick the correct album." - https://discussions.apple.com/message/18901866 - Newer versions in upper right hand corner, Options>Get Track Names

ESS/XSS Web Dynpro SCA import in CMS to view/modify Web Dynpro Source Code

I am having problems importing ESS/XSS Web Dynpro related SCA's into CMS.
Following steps were followed
1. Download following files from SAP service marketplace.
BPERP4ESS0_0-10003146.sca
ESS09_0-10002965.zip ( This file shows as SCA in the download page but download as with .zip)
PCUIGP009_0-20000568.zip ( This file shows as SCA in the download page but download as with .zip)
Question: Is this correct, did I get all I need? Do I need to download any more files?
2. Deployed above files using SDM.
3. Created a product in SLD and defined software component dependencies(SAP_BUILDT, SAP_JTECHS, SAP-JEE) I could define any of the above files(BPERP4ESS0_0-10003146, ESS09_0-10002965,PCUIGP009_0-20000568) as software dependencies as I could find in the software catlog.
Question: Should this files show up in the software catlog? If yes what should I do?
4. Created a track in CMS.
5. Added software components for development defined in the SLD. Above files doesn't show up under sap.com to be added as development component. I already copied BPERP4ESS0_0-10003146.sca, ESS09_0-10002965.zip,PCUIGP009_0-20000568.zip to D:\usr\sap\JTrans\CMS\inbox.
Question: How do I add this files to development components??
5. All other required Software Components(SAP_BUILDT, SAP_JTECHS) were automatically added when I added the development component.
What should I do so ESS09_0-10002965.zip,PCUIGP009_0-20000568 would show up under sap.com vendor component list??
Any help on this is greatly appericated.
Thanks!!

Hi,
Did you receive a response to this question? We are having the same problems whilst following some instructions we received from SAP's OSS titled the JDI cookbook for ESS.
When defining a track in the CMS the software components SAP_ESS and SAP_MSS are not in the list for vendor sap.com. Yet we use the standard ESS and MSS portal content delivered by SAP.
How do we get these components in the list so that we can select them?
Thanks in advance.

Error importing *.SCA file into NWDS: Import (into source SC) not possible

All,
When attempting to import an SCA into a new project in NWDS, an "Import (into source SC) not possible: SCA doesn't contain DC sources" occurs. Any assistance to fix this issue appreciated.
Thanks,
Lee

You can indeed import SCAs into local development configurations in NWDS (Eclipse). You have to have a pre-existing software component of the same name and vendor which may or may not be empty.
In the Development Infrastructure perspective in NWDS 7.1, just right-click on the software component you want to overwrite with the import and choose "Import".
To import SCAs into a CMS track in the NWDI, you have to go to http://<NWDI server>:5<nn instance no>00/devinf/ and import the SCAs from the transport inbox directory of the NWDI server. Don't forget to maintain the SLD if necessary.
Cheers,
Thorsten

CMS tracks

Hi Friends,
We are implementing CMS in our landscape to transport XI objects between the systems. Our landscapes are XI1->XI2 (this is one landscape) and the other one is XID->XIQ->XIP. We want to transport the objects from XI1 to XI2 and then from XI2 to XID and viceversa. I configured the CMS and created a track for one of my components for the both landscapes. While creating the track I gave the DEV and QUA URL for the first landscape but I'm stuck with the creation of track for the second landscape for the same component.
Can anybody please help me define the track for one of my components for the second landscape mentioned in the above scenario in a way that once the objects are imported into XI2, I should be able to import them into XID? Or is there any way to directly import objects into XID once the objects are moved to XI2?
Any kind of response is greatly appreciated.....
Thanks

Hello,
Please go thru these links....
How to configuring the CMS for XI?
Where can I get installation files of DTR, CBS, and CMS?
<a href="https://websmp201.sap-ag.de/form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202">https://websmp201.sap-ag.de/form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202</a>
<a href="/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms:///people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
With Regards,
Raju.
<b>Please give points if useful...</b>

88 Software Dependencies Imported Into CMS Track

Similar Messages

Maybe you are looking for