8800 Scirocco Problem - Need Urgent help please an...

Got lots of pics and texts over the festive period and lots of those pics of my 18mth old son.
Noticed over last few days that the phone would take ages to come on after entering the PIN CODE which it accepted. Eventually the Menu screen came on though.
Today however the battery went so the I charged the phone as usual and then switched on . Screen lit up with NOKIA then requested my PIN CODE which i entered and this then said ACCEPTED and then the Nokia logo and music and then a lit screen and nothing. It stayed like that until eventually the screen light goes out. Then eventually it just switches off. Ive kept repeating this and pressing buttons after the Pin Code to no avail altho it will let me enter numbers on the screen but nothing else really.
Orange have arranged a replacement tomorrow night. What can I do to retrieve the contact names and numbers and all the photos I have and texts ? I will be so devastated to lose the pics of my little boy which are irreplaceable.
ANY HELP GRATEFULLY RECEIVED or is this a lost cause ?
thanks
AJ

If the data you want is held on the fone then you may have an issue if the fone wont even boot up.
How are you having it replaced.
ie: Are they sending you a replacement by courier with the faulty one being picked up at the same time ? if so it is lost.
A Nokia engineer may have been able to try and boot up the handset to try and recover the pics etc.
Try removing the battery for a few minutes to soft reboot the handset back up.... worth a try !
Message Edited by bandofbrothers on 02-Jan-2008 08:57 AM
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Similar Messages

Need Urgent help please? I need to restore from a previous iphone backup.

Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!

rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

What should i do i cant install time machine back up .I need urgent help please :(

Hey guys ! please help me tomorrow is my exam and I don't have my laptop for study . A while ago I needed windows on my mac and while installing it via boot-camp I somehow managed to wipe whole mac partition even recovery so I was left with only windows on my mac.
My Condition :- No recovery PS. I have external recovery on my USB. I saved those files from internet recovery was tired of downloading 1GB every time to get into recovery. )
No mac OS
no recovery partition .
so now the problem is I always thought that I do have a time machine backup on my hard disk so ill just install it simple .
I tried internet recovery ... then got into recovery ... tried to install my time machine backup and it said .. [ ERROR CREATING RECOVERY PARTITION ]
I had the time machine backup of OSX mavericks .
when I tried the reinstall OSX option it said it will download mountain lion . I was like fine download it whatever .. i tried the download but every time I try it get stuck at a point with some error . (maybe cause of my slow internet )
I have reinstalled the windows 8.1 but I cant use X-CODE on it .
what should I do
I want my OSX backup
my friend have a ISO of Mavericks and mountain lion both will they help ?

Recovery Partition Creator 3.8
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)
When you go to Internet Recovery use Disk Utility to repair the drive and repair permissions. Then erase the partition, formatting it as Mac OS Extended (Journaled). Click the option button and select GUID. Then try to install the OS.

Need Urgent Help Please!

HI There,
I have been struggling with JavaScript code for days now, and this is my last resort! Please help...send replies or futher information to [email protected]
I am trying to create a JavaScript slide show with links for Next Slide, Previous Slide and Home Slide.
Is it possible for you to view my page and tell me what I am doing wrong. I have looked at this page for hours and can't figure it out, I must be missing something or have something in the wrong order, but can't figure it out...please help....thanks...
I think I need someone to explain the EXACT code for this page as it would appear in the page so it displays correctly.
If you can figure this out, I have 2 more I need help with too...
Thanks so much, Much appreciated...but this is a URGENT request. Need a quick answer that will work!
Any ideas????
Here is my code:
<HTML>
<HEAD>
<TITLE>JavaScript Slide Show - PhotoAlbum</TITLE>
<SCRIPT LANGUAGE="JavaScript">
     var PhotoAlbum = new
     Array("bunny_lady.gif","business_lady.gif","running_lady.gif","color_lady.gif")
     var PicIndex=1
     var pictures=PhotoAlbum.length
     function NextImage ( ) {
     if (PicIndex < pictures) {
     PicIndex++
     document.ImgAlbum.src=PhotoAlbum[PicIndex-1]
     function PreviousImage ( ) {
     if (PicIndex > 1) {
     PicIndex--
     document.ImgAlbum.src=PhotoAlbum[PicIndex-1]
     function home ( ) {
     document.ImgAlbum.src=PhotoAlbum[0]
</SCRIPT>
</HEAD>
<BODY BACKGROUND=BACK02.jpg TEXT=Blue>
<CENTER>
<H1 ALIGN=Center> The Vacation Photo Album</H1><BR>
<H3 ALIGN=Center> Click on Previous or Next to view pictures in my Slide Show </H3><HR><HR>
<IMG SRC=bunny_purse.gif NAME= ImgAlbum Width=400 Height=270>
<BR>
<HR>
[First Image]
[Previous Image]
[Next Image]
</CENTER>
</BODY>
</HTML>

And when you do post to the Javascript forum (you do know that Java != Javascript, right), you might want to try less of a "do my homework for me" approach. I don't know about those forums, but if they're anything like here, they'll expect more effort and more specific questions from you than just "this doesn't work, please fix it completely right now." I also doubt they'll be any more impressed with your urgency than folks here usually are.
ジ

Bit of a problem need some help please

import java.io.*;
class IO
public static void main(String args[])
String sOutString = "";
int iRecordLength = 0;
int iWork=0;
int[] array = new int[21];
try
// creat input file, buffer.
FileInputStream fis = new FileInputStream("myInFile.txt");
BufferedInputStream bis = new BufferedInputStream(fis);
DataInputStream dis = new DataInputStream(bis);
// Create an output
String fileName = "myOutFile.txt";
File myOutFile = new File(fileName);
FileOutputStream outStream = new FileOutputStream(myOutFile);
PrintWriter out = new PrintWriter(outStream);
out.println ("This is the header record");
String record = null;
while ( (record=dis.readLine() ) != null )
String sTest = "";
sTest = record;
if (iWork==0)
iRecordLength = sTest.length();
sOutString = sTest.substring(0, iRecordLength);
System.out.println(sOutString);
out.println (sOutString);
System.out.println(sTest.substring(0, 5));
out.close();
// System.out.print ("\n");
catch (IOException e)
System.err.println("File Error; " + e);
System.out.println("");
System.out.println("Ended");
System.exit(0);
// use get chars w substring
Ok theres my code what im trying to do is substring my in file so that it will take a section of it out and put the rest in
an out file. The problem is that my in file has a few lines and i do not know how to dubstrin g different linec can anyone help me?

Well,
I took the liberty of rewriting your code to make it readable, and expurgated most of the carp... what you've got there boils down to a really complicated-azzed implementation of cat.
package forums;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.PrintWriter;
import java.io.BufferedWriter;
import java.io.FileWriter;
import java.io.IOException;
class FileCatterator {
public static void main(String args[]) {
    BufferedReader input = null;
    PrintWriter output = null;
    try {
      input = new BufferedReader(new FileReader("FileCatterator.java"));
      output = new PrintWriter(new BufferedWriter(new FileWriter("FileCatterator.txt")));
      String line = null;
      while ( (line=input.readLine()) != null ) {
        int len = line.length();
        String substring = line.substring(0, len);
        System.out.println(substring);
        output.println(substring);
    } catch (Exception e) {
      e.printStackTrace();
    } finally {
      if(input!=null)try{input.close();}catch(IOException e){e.printStackTrace();}
      if(output!=null)output.close();
}The substring doesn't do anything.
Now, What did you need it to do? Print the first so-many characters of each line or something?

Issue with shared services - Need Urgent Help please!!

Hello Experts
One of my customer has installed a new instance of oracle and copied all the schemas and data over to the new instance.
Now when they bring up shared services, have lost all our provisioning. None of the projects are recognized by shared serices and gets the following error when we try to bring up a user
'xxxxx' is not a recognized Shared Services project. Please contact your adminstrator
Is there something we need to do to restore Shared Services to its original state?
Thanks in advance.
Regards,
Sonu
Edited by: 637223 on Jan 20, 2009 2:19 AM

hi,
I doubt that "creating a new instance of oracle and copied all the schemas and data over to the new instance" will register the project with shared service and thats why giving error. Because when you install shared service, it asks you about the database name (oracle in your case) to register with. So even if you overwrite that database by new instance it gives error.
Have you tried the configuration utilty ? Over there you can provide the new database instanse as your database and configure your shared service. Remember that you need to do a complete configuration of shared service , analytic administration services and analytic services. After configuring, Restart the system.....it should work.
Hope this helps!
Regards,
James

External Table Problem - Need Urgent Help

Hi All,
I want to load flat file data to oracle database.
I have used external table feautre for loading data.
My data is like
"F","1","1","KIAWAH ISLAND rated off the pace, rallied to gain command on the far turn, then"
Now my problem is that fields are terminated with comma but there is a comma inbetween field values. please see last field value (i.e ", then" that is value of third field).
Now what access parameter should specify to create external table that maps to this type of data. I have used fields terminated by "," and Enclosed by '"' and '"".
but it still gives me error.
So, Please help urgently

Could you post your controlfile?

Serious problem need urgent help

Hello,
sorry to ask you directly to help me but I'm in trouble with my mobo.
My Pc is:
P4 2.2Ghz
Mainboard: MSI 845e Max2-Blr
Memory:512MBDDR(256Xms2700 Corsayr;256MB Seitec 333mhz)
Video:Abit GF4 Mx440
HD:60GB Deskstar IBM
OS:Win XP PRO
The problem is:
My computer worked fine until yesterday when the xms memory arrived.
I opened my Pc and put out the Seitec memory that I had to test the Xms memory. They went really good. Then I tried to put them together
but the computer didn't finish the boot process, it booted until the Win xp logon, so i tried to change the memory slots where the memory
were placed but nothing happened until when i mounted on the pc only the XMS2700 CL2 Memory module that funcioned before.
The computer didn't boot.The I saw that the leds on the D-bracket were all red, that means the Cpu is damaged or not installed properly.
I tried with the other memory stick but same problem.
Please help me as soon as you can.
Thanks ;(

My dam computer technician before I could ***l him what mobo
to order he already bought for me a new MSI845E Max 2-Blr.
Do you think Msi845E Max2 will broke again or not? ;(

EBS-Interconnect Integration problem - Need Urgent Help

Hi,
I am facing problem while trying to connect Oracle Interconnect with Oracle ESB using BEPL Plug-in feature.
I was actually going though one document on ESB-Interconnect integration and follow all the steps. It did create an entry to ESB console but not able to import Interconnect's BPEL Plug-in Application to ESB console (What I was expecting to get after completing ESB-Interconnect integration).
All step that I have covered are given below. Can someone help me ASAP. This is kind of a show stopper issue for me.
For more information you can email at [email protected] or call me at +1 412 296 2094.
Bunch of thanks in adance.
Note - I am not able to print OUTPUT section in this post, So anyone need that I can send in different Email.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1. Open Command Prompt
CD to the folder where admin_client.jar is located
2. Deploy "IcAdapter"
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -deploy -file c:\product\10.1.3.1\OracleAS_1\integration\esb\lib\icAdapter.rar -deploymentName ICAdapter
3. Deploy "icwsilplugin"
with log:
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -deploy -file c:\product\10.1.3.1\OracleAS_1\integration\esb\lib\icwsilplugin.ear -deploymentName icwsilplugin -parent default
4. Bind "icwsilplugin"
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -bindWebApp -appName icwsilplugin -webModuleName icwsilplugin -webSiteName default-web-site -contextRoot /ic
5. Shutdown and restart the ESB server
6. Run the "regadapters.bat/sh script" from ORACLE_HOME\integration\esb\bin (for this case its c:\product\10.1.3.1\OracleAS_1\integration\esb\bin) directory.
7. Start Interconnect database and repository.
8. Change "oc4j-ra.xml" located in "<esb_home>\j2ee\home\application-deployments\default\IcAdapter (for this case - c:\product\10.1.3.1\OracleAS_1\j2ee\home\application-deployments\default\IcAdapter)" with following details:
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd" schema-major-version="10" schema-minor-version="0" >
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
<import-shared-library name="oracle.xml"/>
</imported-shared-libraries>
<connector-factory location="eis/ICAdapter" connector-name="Interconnect Adapter">
<config-property name="applicationName" value="BPELPM"/>
<config-property name="driverClassName" value="oracle.jdbc.driver.OracleDriver"/>
<config-property name="connectionString" value="jdbc:oracle:thin:@ASC-587CDFCE:1521:ORCL"/>
<config-property name="userName" value="ichub"/>
<config-property name="password" value="tcsalc0a"/>
<config-property name="repoName" value="InterConnectRepository"/>
<connection-pooling use="none"></connection-pooling>
<security-config use="none"></security-config>
</connector-factory>
</oc4j-connector-factories>
9. Add <code-source path=”<IC_HOME>\integration\interconnect\lib\oai.jar"/> to the "Server.xml" file located in <ESB_HOME>\j2ee\home\config (for this case - c:\product\10.1.3.1\OracleAS_1\j2ee\home\config)
Given "<code-source path="C:\oracle\AS101202MID\integration\interconnect\lib\oai.jar"/>" in place of <code-source path="C:\oracle\mid\integration\interconnect\lib\oai.jar"/>
10. Restarted the ESB server to see desired output in ESB console.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
===========
OUPUT Details
===========
Expected Output:
================
A tree structure look like as below -
- adapters
applications
- InterConnect
- eis_ICAdapter_BPELPM
Implemented_Procedures
Invoked_Procedures
- Published_Events
Customer_AddCustomer
- Subscribed_Events
Customer_NewCustomer
legacy
Output that I am getting:
=========================
A tree structure look like as below -
- adapters
applications
InterConnect
- legacy
mvs08
Regards,
--Kaushik

I see what you are saying. Actually, I have already thought about that Option (Creating an AQ in between so that Oracle Interconnect can write to and EBS can read from for a particular message). Thanks for reminding me about this.
I was just trying to see Oracle Interconnect's BPEL Plug-in capabilities. I will try to run "regadapters.bat / sh" few more time to see if it works this time.
Unfortunately, I don't know dutch but you can always send me what you wrote. I will try to translate the same using some translator.
Thanks a lot for your help.
--Kaushik

One edge animate oam file with sound no work in muse, I need urgent help please

(I speak spanish and I translate this with google translate, sorry. Try to understand)(I can read english)
A sound file oam place it in adobe muse does not work, how can I do. In works right edge Animate and when I preview in the browser looks perfect and 100% working well but when I step by Muse does not work. When I pass the file to Muse, you can see placed in the page design, but when I preview I do not see anything in the file that I placed. When I tried it without sound if it worked but after you add sound and replaced it with the new file (delete the old file and place the new) no lifts. I implementación.oam public with package, and then drag the file created page design muse.

Try unplugging the AC adapter, removing the battery, then holding the power button down for a minimum of 30 seconds. Then plug the AC back in and try to power it up. If it does, good. If not, repeat the proceedure only time only plug the battery back in. If this still doesn't work you'll need to send it in to either Toshiba or to some repair shop that has an EProm burner such as http://www.aqstech.com/ as you won't be able to fix it at home.
And next time DO NOT FLASH FROM WITHIN WINDOWS. NEVER, EVER, EVER, UNDER ANY CIRCUMSTANCES FLASH A BIOS UNDER WINDOWS. Always flash a bios from an actual Dos Prompt. The BIos File from Toshiba provides instructions inside the Archive once you decompress it on creating a Bios Flash CD (and you can use a ReWritable CD-RW so you don't waste a disk) that should be used.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

865pe Neo2-V problem. need some help, please

i clocked my CPU [email protected](box culer-40C idle) and i believe that i can raise FSB more but i have problem.my Kingmax(512ddr400) goes to 505 MHz, and i can't stop her. i can't put FSB/DRAM 1:1. it is allways 4:5. My old Transcend too. So it isn't memory. In BIOS i have options:
ddr - 266/333/AUTO. i have tried 333 and AUTO and DDR is 4:5. Also, i don't know where i can turn off "performance mode".
DDR modul is in slot1. I did not tryed to put him in slot2 or 3. Default timings are 2.5/3/3/7. i chosed 2.5/4/4/8.
also, when i chose "by speed", BIOS do nothing, and latencies is like before i chose "by speed" so i need to chose 2.5/4/4/8 by myself.
BIOS version is 6.1(latest)
this is my stable selection:
CPU - 3.33 GHz(18x185) - 38 C temperature now/ motherboard 29 C
DDR - 462 MHz
Thanks

my memory now runs @ 1:1 after i chose option DDR 266 and my cpu goes @3.78!!!!!!!!. excelent.

Need urgent help please PS + Lightroom instalation

Hi,
I bought some days ago the Monthly pack of Photoshop and Lightroom (12,99/month)
Before I had the trial version. A friend of mine told me to unistall ADOBE programs before buying the Photoshop and Lightroom. I did it, or better I thought I did it. When I check in the Application I found them there and when I click on the Uninstal the program pop out a window with the message "you have to download the latest version of Adobe Application Manager". I did it, but when I try to delete the old Photoshop the window pop out again and again, and it doesn't let me download and install the Adobe Creative Cloud I bought
PLEASE PLEASE ANYONE WHO CAN TELL ME WHAT I HAVE TO DO?

IreneOO I would recommend you begin by completing the steps listed in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html. Once those steps are completed then please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the Adobe Creative applications included with your membership.

I need urgent help please

I have an iPhone 4, I bought it unlocked and I'm using that plan that MetroPCS has to unlock it and what not.
There's a sim card in there and everything.
Yesterday I went over a friend's house and he barely has any signal but that's ok.
I came home and iMessage was just not activating.
I've been resetting it and restarting it and I've been trying everything. Everything.
iMessage just WILL NOT activate. I even made another account.
Please help me out.

I tried most of that and it still doesn't work.
Thing is my iPhone since it's with MetroPCS in the phone setting it says "Unknown" in phone number.
And when I try to put in my number it says "Phone number could not be saved."
Also iMessage was working perfectly fine.
When I sign in with my Apple ID it STILL says waiting for activation but I can still send iMessages?
Also my number is gereyed out but it's not checked.
Please help.

Huge problem, need urgent help.

Here's the story:
I dropped my ipod touch and cracked the screen, the touch screen was working fine.
After fixing my screen, I attempted to connect the ipod to the computer to charge it and update my music/apps. However it would not recognise as a apple device on itunes but it would charge.
So I thought to solve this problem, i can just restore it to factory settings through the ipod but now whenever i turn the ipod on, the screen is just stuck at the apple logo screen with the loading wheel under it.
So in conclusion, is there any way i can fix it FOR FREE? or is the ipod just died.
Thank you

No luck, the device is just stuck on the itunes + usb cable, it does not recognize on Itunes. Thank you though

Serializing an image NEED URGENT HELP (PLEASE!!!)

HI all ,
I am trying to serialize an image object . the class has been extended from java.awt.frame.
when i try to serialize it, i get the following error :-
Writing aborted: sun.awt.window.wImage not serializable. I want the same
object in another class to use it.
can anyone tell me a solution ?
thanks,
sam.

This is because eitehr your supper class or one ore more mambers of your super class are not serializable.
You will have to write a custom serialization logic for your class (Implement the readObject and writeObject methods) in order to fix this

8800 Scirocco Problem - Need Urgent help please an...

Similar Messages

Maybe you are looking for