8800 Series / Intelligent Proximity: Calling mobile contacts

Imported the contacts from my mobile phone, but it seems I can only call those contacts when it is initiated from my paired mobile phone. If I disable Bluetooth or try to call from my IP Phone extension, I'm able to view the contacts but the Call softkey is disabled.
Any way around this? Ideally when users are in their offices they'd prefer to make calls from their office line, not their mobile.

Similar Messages

200 iPhone 4 contacts, but 200 entries called mobile too

Howdy!
I picked up my iPhone 4 last week, synced it with my MB, didn't really pay much attention to what it was syncing. Now I've noticed though that it has synced my mac's address book, and for every contact I've got another contact called 'mobile' with their mobile number in there.
If possible, I'd prefer to just delete the entire contacts list, and import from my gmail account, but again, I don't know if this can be done!
Thank you in advance lovely Apple peoples! :o)

You can export all your Google Contacts as a vCard file and then import them into your empty Mac Address Book.
In Google, select all, export, vCard, export, save
Empty your Address Book, then sync.
Then import your vCard file, then sync again

Calling a Contact Inadvertently From Phone App

When I tap on the tile which I have setup for the people "app" which I have placed on the "home" screen, I can scroll through contacts, tap on a contacts name and then I have the option to call mobile or send an SMS. However if I select the phone app from the app list or an app tile placed on my home screen, and scroll through the contact list, it is easy to inadvertently call a number (especially if the name is long and stretches across the screen) if a scroll gesture is interpreted as a tap. This is because there is no secondary call button once a contact is selected.
Is this a bug or just an oversight?
Does anyone else find it annoying?
I usually just use the people app for this reason, but have to switch to the phone app if I want to check on call history or dial a number manually from the numeric keypad.

Hi Alicia,
I am not sure about UCCX bout with UCCE & CVP you can provide that service.
"Cisco Unified CVP supports audio-based self-service and queuing for calls, which optionally become video calls when routed to a contact center agent. This support provides rich caller-agent interactions while saving cost and bandwidth during the self-service portion of the call. Video contact center is supported in this way for the following calling endpoints:
• Cisco TelePresence™ communications system
• Third-generation (3G) mobile devices (when connected to the network through a Cisco Integrated 3G-324M Gateway)
• Cisco Unified Video Advantage cameras
• Cisco Unified IP Phone 7985G videophone"
http://www.cisco.com/en/US/customer/prod/collateral/voicesw/custcosw/ps5694/ps1006/data_sheet_c78-626453.html
Regards,
MAR

I cannot call my contacts and their calls don't co...

Can someone please help me. I can't call any of my contacts via skype. I can text them and they can text me but we cannot connect via phone or video. Can you please tell me why this is happening?
I have read all skype's messages and solutions for help and none of them address this directly.
The only call I can make is to the Skype Test Call. I have checked my connection, my mic, video, internet speed and everything is working so I don't know what's going on. I logged out of skype on my desktop, tried with my android and still nothing. I restarted my computer and again nothing.
I have skype credit so can call mobile phones but I need to be able to video chat and call my skype contacts directly and for some reason, it's not working...most of my contacts are based abroad so it's vital I have this component; if not, then there's no point having skype.
Can someone please help!!!??!?!
Thanks in advance!

I have had the same problem the last 3-4 months or longer. The only and fastest workaround I have for this issue is:
Ctrl-Alt-Del
Start tast manager
Find Skype and "End task"
Start Skype over again.
Then I can receive and make phone calls. No problem the rest of the day...
Do not like this workaround, but I have no other alternaitves.
Maybe the solution is to make Skype "Not start" automatically when log in. That I will test now
This can be changed in:
Tools - Options
General settings
Hook off - Start Skype when I start Windows

8800 Series / Provider

First, I'm considering getting rid of my tiny Pearl and replacing it with an 8800 that is quad band so that I can use it in Europe and China. Everything that I have read about the 8800 series does not mention international usage. Does anyone know which 8800 models are quad band?
Second, I've had T-Mobile as my provider for years and while their partners overseas provide decent reception and service, their reception quality here in California has deteriorated to the point where I cannot stand to use them on a daily basis anymore. Granted that that T-Mobile is cheap and their full data plans attractive but they are giving back what I pay for. Any recommendations for a better provider with better reception in CA and exceptional international service would also be appreciated.
Thanks again.

I guess you are talking about the 8830.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I am missing a folder called "Mobile Documents" for iCloud access

In today's (1/21/13) OSX daily, they talk about a cool, free utility/app called Plain Cloud at which gives easy desktop access and syncing to iCloud from the desktop like DropBox. They talk about a folder that’s inside the user Library folder called "Mobile Documents" which needs to be accessed. There is no folder by that name in either my user Library or System Library folder, or in fact anywhere on my drive and therefore when I try to run Plain Cloud, I get an error message saying that it "can't find iCloud folder". Since my iCloud is apparently set up properly and I can access it from icloud.com and thru iTunes, why would this "Mobile Documents" folder be missing from my user Library folder and how can I add it so I can use the Plain Cloud utility?
Thanks,
JAY

What do you mean access icloud through itunes?
Are you successfully able to sync some Apple data via itunes (like contacts or calendars)? If you haven't tried yet, it's possible your mac isn't yet connected to icloud (being able to access icloud.com means nothing in this case).
System Preferences>icloud, have you turned any of these services on and have you signed into icloud?

Skype for Android Phone Video: How to Call Mobiles...

Our how-to videos will teach you everything you need to know to get started with Skype. Now, learn how to call mobiles and landlines on Skype for Android.
Was this video helpful? Could you get your contact added?

I accidently sent Video Message from my Android mobile (Samsung Galaxy S3 Mini)
Now i wanto Delete that Video Message, But i cant delete it. Please help I tried following methods:
Settings > Applications > Applications > Skype > Delete data & Cache Data
Uninstalled Skype
It Doesn't work please help. I tried both methods twice

When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens.

Same thing here. I'm getting very frustrated. When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens. Then I try to end the call and hit the END button. Sure, it looks like the call disconnected, but as soon as I try to make another call, I see the same screen (the first called) and the words "calling mobile". The only way I can rememdy this, naturally, is powering off and restarting. But, c'mon...$300 for a phone that you have to power down between calls???
I've got the latest OS update, no jailbreak, or anything exotic on my 4s. What's more, when I try to make a call 2 out of 3 times, the dumb SIRI opens up and stops me from making the call. (and, yes, I have very carefully checked my process that I am not intentionally activating SIRI with my cheek.)
Again, $300 for all this in just trying to make a call?

reset your phonr by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Is it possible to call the contact number indicated in the cell?

Hello! Tell me please, I want to move a lot of contacts in the electronic form and organize a list of contacts in Numbers. Is it convenient to use it on the iphone? Is it possible to call the contact number indicated in the cell? That is an example: name, contact, etc. A few columns. I click on the number of human cell, and then what would happen if a set of user (as it happens in the notes for example)?
Sorry for my english.

Your post is now in the iWork for iOS community. You should be able to get to it using the link in the email you receive with this message.
Regards,
Barry
PS: Interesting that I received the notification of your post in Russian (except for the first and last words).
Here's Googles translation of my reply above:
Ваше сообщение в настоящее время в IWORK для IOS сообщества. Вы должны быть в состоянии добраться до него по ссылке в сообщении электронной почты вы получите с этим сообщением.
С уважением,
Барри

Can't call mobile or out of town numbers

Hi All,
My nan's landline won't call mobile phones or out of town (where you have to dial the area code) numbers. I worked out last night that if I prefix the number with 44 then it will work, but does anyone know why this is happening?
I called BT last night (for about an hour) and didn't get very far other than they told me there were no restrictions on the account.
She has a digital phone, has she accidently set something to make this happen or is it likely an issue with her line>?
Any help appreciated,
Cheers
Steve

Do you have call barring active on the line?
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, its connecting then fails. When someone try to FaceTime me,I try to access but it says connecting then fail

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, it says connecting then fails by ending automatically. When someone try to FaceTime me,I accept but it says connecting then fail. I only have a MacBook Pro to FaceTime and not an iPhone. I was informed that I should be able to FaceTime from my laptop via video call without an iPhone.
Please advise.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
1. The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
2. Connect to a different network, such as a public Wi-Fi hotspot, and try again.

No Call or Contact Info on my Text Messaging screen

Ihave an iPhone 3G - but I don't have the Call or Contact Info button available on my text messages screen. It is infuriating to receive a text from someone not in my contacts list and (a) I can't call them and (b) I can't add them to my contacts as I don't have either of these options displaying on my screen within Text Messages. My friend has the same model of phone and does have these options available. I cannot find where to amend the settings. Please help.

Actually have found the buttons right at the top of all the message stream for each text.

Contact Caller Name identification when incoming call, central contacts list and short numbers

Hi,
I have a New CUCM + CUC + CUP
I'd like know whas is the best way to do this:
I want to createa list of central contacts (for all my extensions), and assign to this contacts its telefhone number (9-12 digits) and a short number of 4 digits.
I want make a call to my contacts using this 4 digits (short number)
After I have saved this contact in the ContactList,, I whant that a internal user, using the contact list of the internal cisco phone can search and call the contact I have created, searching by name (or surname). I want that the user could make a call using short number or searching contact.
Finally, the most important, I need that when that external contact makes a call, the cisco phone ringing shows the name or surname of the contact (not the telephone number) I need to know who is calling (it it is in my contacts)
Thank you!
Carlos Moreno

You say you have CUPS, so that means you can only go as far as 8.x versions.
You can configure E164 to the DNs, and use TPs to use short dialing.
You would need to add the users and all the info to your directory, either manually, or in your LDAP if LDAP integrated.
The last bit cannot be done without a 3rd party, we don't have phone to name/contact resolution.

Hello all, I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings Gene

Hello all,
I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings>General>Siri. At the General menu "Siri" doesn't appear. What should I do to set Siri up if it doesn't appear at settings>general?
Thank you,
Melanie.

Go to Settings>General>Restrictions and make sure Siri is set to On.

R series intelligent DAQ, NI-Compact RIO , NI single board RIO

Hi,
I'm in the phase of choosing an FPGA to use in programming some DSP modules. The thing is that while I'm reading about the different technologies to be used, I find it difficult to know how will these devices be connected to my PC and programmed. For example, when using R series intelligent DAQs, do I have to get a compact RIO as well , or can I get a PCI-bus R - DAQ and connect it to the PC.
Some clarification of how to use each of these devices will be appreciated.
Thanks,
Walid

Just to elaborate on what Venkatesh said
With a compact RIO you will connect your PC to the RIO using Ethernet, direct through a cross over or through a network hub.
This introductory video will teach you how to install, configure, and program the latest NI CompactR...
A PCI R series card, just plugs straight into your Windows computer PCI slot.
A PXI card will plug into a PXI chassis and will give you one of 2 programming options
1. If you have a PXI system controller running Windows XP with the appropriate drivers and version of LV you can program the FPGA directly in the PXI chassis
2. You can connect to the PXI chassis through Ethernet and program the FPGA from there.
Compiling and deploying your program will work the same no matter what connection you use.
-Hunter

8800 Series / Intelligent Proximity: Calling mobile contacts

Similar Messages

Maybe you are looking for