8800 Sircocco - Help required please

Hi ther, just bought this phone and have a few problems hoping somebody can help.
1. Anyone had problems hearing the other caller? I have difficulty, tried increasing the volume etc but to no avail.
2. How do you add / edit the voice commands in the contacts? I want to use my bluetooth but It wont recoginse the "default" name tag given to all my contacts..
Thanks in advance..

I don't own the Sirocco Edition but the 8800 original. Don't mean to offend but, are you making extra sure that the ear-piece for the phone is properly positioned? Also double check that there's no plastic over that part of the phone. One of the things about the 8800 series is that unless the portal for the incoming speech is right over your ear, its pretty much inaudible. For some reason it seems to be especially problematic with this type of handset. Otherwise, the only other reasons I can think of are that you might have some signal issues where you're located, or it could just be faulty. Try it out in lots of different environments and positions and see what happens.
The voice tags are very likely automatic, (similar to the way they are in the N80, or 6233, etc) and you can't edit them per se. They do take some getting used to but the phone becomes better able to recognize tags the more often you use them. To make voice dialling easier, try looking in the options under each contact to see if there is a possibility for adding a nickname, and then try checking to see whether the phone will recognize the nickname for calling that person. One last resort is to check first how the phone pronounces the tag for each default. You might find a slight difference in emphasis or inflection which will make all the difference between getting the right number and no match at all.

Similar Messages

  • Help required please. "Itunes can not read the contents of my iphone"

    Greetings all,
    I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
    I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
    Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
    I have an iPhone 4 running software 5.0
    My itunes version is 10.5.0.142
    I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
    Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
    When I run a diagnostic in itunes under the help tab, I get these fail messages:
    Network Connectivity test: Secure link to Itunes store fail
    Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
    Device Sync test: No iPod touch, iPhone or iPad found.
    *See below for full diagnostic report*
    I have restored back to factory settings twice.
    I have shut down and restarted both my iPhone and laptop.
    I am running Windows 7 32-bit on my laptop.
    I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
    The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
    The iPhone does not even come up in windows explorer as a digital camera.
    The iPhone is NOT jailbroken
    I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
    I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
    I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
    Thanks
    Hoggie27
    FULL DIAGNOSITC REPORT
    Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.5.0.142
    QuickTime not available
    FairPlay 1.13.35
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.96
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.3.494
    Gracenote MusicID 1.9.3.106
    Gracenote Submit 1.9.3.136
    Gracenote DSP 1.9.3.44
    iTunes Serial Number 001BAD14XXXXEA78
    Current user is an administrator.
    The current local date and time is 2011-11-16 10:04:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 230M 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive H: Vodafone  USB SCSI CD-ROM Rev  USB is a USB 1 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
    Description:    PC
    IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:    10.143.147.147
            10.143.147.148
    Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
    Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
    Description:    Broadcom 43225 802.11b/g/n
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Active Connection:    PC
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-16 09:59:57.
    **** CD/DVD Drive Tests ****
    LowerFilters: Afc (1.0.0.2),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    F: hp CDDVDW TS-L633N, Rev 0300
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.5.0.142 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPhone 4 (GSM) running firmware version 5.0
    Serial Number:    85107XQLA4S
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    < Edited By Host >

    Hi AM_Kidd.
    Thanks for your reply.
    I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
    My apologies for forgetting to add this in my original post.
    Thanks again

  • HT4859 Hi - help required please. My kids have locked my iPad and now I need to sync to my computer xcept am on hols and don't have it. Any options? Thanks Darren

    Hi there
    Hope someone can help me here. I am currently on holidays and my
    Kids have disabled my iPad so I now have to sync with my computer.
    I don't have my computer handy and want to use my device over the next few weeks
    if possible so can anyone help me please
    Thanks
    Darren

    You will have to use a third party utility to extract your iPad and iPhone's music.
    Read turingtest2's User Tip:
    https://discussions.apple.com/docs/DOC-3991

  • Maximum number of items reached in FI--help required please

    Hi,
    How to avoid the situation(error)
    Po raised for some 300 line items.
    PO consists of 3-4 header conditions and all the conditions are linked to a differrent GL account all together.
    GR to be done against PO.
    System fails to post the document because of the error 'max no of items reached in FI(since counter limit for accounting document lines is 999).
    This is most likey to happen frequently in my requirement since the POs are often consisting of 200-300 line items and alsmost 2-3 conditions minimum.
    In addition to that we have thought of going for purchase account management which means that effectively 2 more additional postings in GR.
    So all in all for every line in PO there could be atleast 6-8 accounting entries getting generated at the time of MIGO or any goods movement.
    This very commonly happens in Sales issues also and in Invoicng also.
    I have raised this issue earlier also but could not got any concrete answer.
    Many suggested to go in for split GR but how far that is advicable.
    There is summerization option but I am really not getting any que out of some notes I read and some forum postings I read.
    Can anyone suggest me a simple step by step approach for achieving this and basically how it works and would be helpful for me.
    I repeat and request you all to help me in this.If someone has already done this then please share the knowledge.
    Regards,
    arjman

    Hi,
    The issue what you mentioned is really a very painful and most complex one which we are also researching.  OSS suggested a OSS note and it didn't work.  Yes, as you  said, we have that issue in MIRO for now....I am afraid, it would comeup in MIGO as well, then, I will have no sleep, for sure....suprizingly, OSS is working very slow on this issue to my surprize.  The OSS note doesn't clearly specify what to and how to summarize.  We have different issues in MIRO....one for number of tax lines exceeding 500 lines...and GR/IR lines exceeding on another end...we thought if we can't fix tax lines, at least we can work on GR/IR lines but neither one is successful....We have this issue in ECC 5 for the past 3 months...with real good expert in each functional space in the team, we couldn't fix it yet!!!
    just FYI

  • Adobe Audition R6025 Virtual C++ Crash (Help Required, Please!)

    Hi.  I posted a problem about Rewire earlier but I seem to have sort of overcome that.  My problem now is that I get a crash with a dialogue box stating that AA is shutting down:
    'To continue working where you left off, please restart Audition.'
    This is followed by another dialogue:
    'Microsoft Visual C++ Runtime Library Runtime Error!  R6025 - pure virtual function call'
    And then it shuts down.
    I searched for solutions and have discovered that r6025 is a very general fault that can mean a number of things.  Here's the specific thing that causes the crash:
    If I have a session from me previous machine open, it'll play fine.  If I try to change the input to a track, that's when the crash occurs.  I can do it if I create a new session (I think - I haven't done anything complicated from scratch since I got a new PC this week).
    I have tried a few things that have been suggested on other posts:
    Reinstalling AA (a few times).
    Running Audition in compatibility mode for XP SP2, XP SP3 and not in any compatibility mode.
    Uninstalling Quicktime (as suggested http://forums.adobe.com/thread/414943).
    Deleting the Application Data backup so that a new one gets created next time (as suggested http://kb2.adobe.com/cps/403/kb403357.html).
    Disabling all plugins.
    Trying it out on another User ID.
    None of these measures have helped as of yet.  I'd really appreciate some help or some suggestions of actions I could take.  My system is an AMD Phenom II X4 945 (AM3) in a Gigabyte mainboard with 4GB RAM, running Windows 7 Professional 64-bit, AA 3.0.1 and using my Audigy 4 Pro from my old PC rather than the onboard Realtek HD Audio (for Asio purposes).
    Please post if you need any more details to help with diagnosis.
    Anticipated thanks.

    Hi.  Thanks very much for the posts.  I'm aware of the 48kHz issue from previous incompatibilities with other people's sessions.  Always managed to work in 48kHz with Reason before using XP.  I've just tried the ASIO4ALL driver with the same result, I'm afraid.  Not really sure if the problem is limited to Reason because I don't own any other Rewire apps.  I'm really hoping to get this sorted out because I use Reason an awful lot in conjunction with Audition as I think they make a nice pairing of complimentary skills (lack of a tempo track notwithstanding).  I can change inputs on sessions with no Rewire tracks in them, using either Creative Asio or ASIO4ALL and it doesn't crash.  I can also use Reason quite happily on it's own.  I've even managed to create a new session with a couple of wav's and then set Reason on another track with no problems (although these sessions are very simple).  I'm really stumped.  I suppose I could try to run the whole thing in XP Mode but that negates some of the advantages of using my new computer and requires me to install everything, Audition, Reason and all my plugins, for a second time.  I will do that if I have to but that's what my Dad, a scientist, would call an inelegant solution.  Again, I really appreciate the suggestions you've come up with thus far.  The ASIO4ALL idea was a good one and I'll keep it installed too as an option for when other problems (inevitably) arise.  I'm loath to discard what was a reasonably expensive sound card (even if it is a bit dated and patently not designed for audio engineering).  In my old set up, I used the Audigy for mixing and monitoring but my MBox as in input due to it's Focusrite preamps.  Don't get me started on my MBox and Pro Tools!!!  Haven't even started to install that yet because I know it'll be a nightmare.  It's hard enough trying to install an update from Digidesign.  I'd really be much happier to get things back to the way they were - plus a much faster processor and more RAM.  That was the whole idea of the new machine.  I really love AA and have done since Cool Edit 1.2.  I'm too set in my ways to try and learn new software, not too mention too poor to buy any!!  Any ideas really gratefully accepted.

  • Urgent Help Required Please

    Hello,
    I have the following code
    public class StudentRecords {
       private Hashtable recordHolder;   //Holds marks for collection of students
                                         //Maps students to their marks
       private int noAssignments;        //Number of marks associated with each student
       public StudentRecords(int noAssignments){
          //Argument is the number of assignments for the course
          recordHolder = new Hashtable();
       public Enumeration getStudentNames(){
          //Returns with an enumeration of student names who do the course
          return recordHolder.elements();
       public int getMark(String studentName, int assignmentNo){
          //Returns with the mark for the student studentName on assignment assignmentNo
          Hashtable studentDetails = (Hashtable)recordHolder.get(studentName);
          String assignmentNoStr = studentDetails.get(String.valueOf(assignmentNo)).toString();
          return Integer.parseInt(assignmentNoStr);
       public int getNoOfAssignments()
          //Returns with the number of assignments associated with the course
          return 10;
       public int getAverage(String studentName){
          //Returns average of marks associated with studentName
          Hashtable studentDetails = (Hashtable)recordHolder.get(studentName);
          System.out.println("studentDetails " +studentDetails);
          int total = 0;
          int countAssignments = 0;
          Enumeration enum = studentDetails.elements();
          while(enum.hasMoreElements())
              countAssignments++;
              String mark = enum.nextElement().toString();
              int mark2 = Integer.valueOf(mark).intValue();
              total = total+mark2;
          return total/countAssignments;
       public void createStudentRecord(String studentName){
          //Create a student record which associates a student with the marks for his/her assignments
          if(!recordHolder.contains(studentName))
            //System.out.println("Creating record for " +studentName);
            recordHolder.put(studentName, new Hashtable());
       public void addMark(String studentName, int assignmentNo, int mark){
          //Add the mark given by mark for assignmentNo to the students record associated with studentName
          Hashtable assignments = (Hashtable)recordHolder.get(studentName);
          String assignment = String.valueOf(assignmentNo);
          String markStr = String.valueOf(mark);
           // new record
           assignments.put(assignment, markStr);
       public String toString()
          return recordHolder.toString();
    }Now i have a SAX parser class that is suppose to populate the StudentRecords object. Once this is done I need to output the details into a HTML file using a PrintWriter ( this I can do) but how the hell do I populate my object with this SAX parser.
    Here is my SAX class
    public class MarksProcessor extends HandlerBase{
      public static void main(String[] args){
          //Main method
          try
              MarksProcessor mp = new MarksProcessor();
              Class loadedClass = Class.forName("com.ibm.xml.parser.SAXDriver");
              Parser xParser = (Parser)loadedClass.newInstance();
              xParser.setDocumentHandler(mp);
              xParser.setErrorHandler(mp);
              xParser.parse("Classmarks.txt");
          catch(Exception e)
            e.printStackTrace();
      public MarksProcessor()
       public void error(SAXParseException se){
          //Executed when a serious error occurs in processing the XML source
          System.out.println("Error: Problem with XML "+se.getMessage());
       public void warning(SAXParseException se){
          //Executed when a minor problem occurs when processing the XML source
          System.out.println("Warning: Problem with XML "+se.getMessage());
       public void startDocument() throws SAXException{
          //Executed when the XML document is first executed
          System.out.println("Document started");
       public void startElement(String elementName, AttributeList al) throws SAXException
          System.out.println("End ELEMENT = "+ elementName);
       public void endElement(String elementName) throws SAXException{
          //Executed when the end of an element is encountered
          System.out.println("End ELEMENT = "+ elementName);
       public void endDocument() throws SAXException{
         //Executed when processing is finished
         System.out.println("Document finished " +records.toString());
       public void characters(char[] chars, int start, int length)throws SAXException
              System.out.println(new String(chars, start, length));
    }Here is the DTD
    <STUDENTLIST>
    <STUDENTMARK>
    <STUDENTNAME>Dobbs</STUDENTNAME>
    <ASSIGNMENTNO>1</ASSIGNMENTNO>
    <MARK>12</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Wilkinson</STUDENTNAME>
    <ASSIGNMENTNO>1</ASSIGNMENTNO>
    <MARK>28</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Wilkinson</STUDENTNAME>
    <ASSIGNMENTNO>2</ASSIGNMENTNO>
    <MARK>44</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Roberts</STUDENTNAME>
    <ASSIGNMENTNO>1</ASSIGNMENTNO>
    <MARK>77</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Roberts</STUDENTNAME>
    <ASSIGNMENTNO>2</ASSIGNMENTNO>
    <MARK>80</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Roberts</STUDENTNAME>
    <ASSIGNMENTNO>3</ASSIGNMENTNO>
    <MARK>50</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Wilkinson</STUDENTNAME>
    <ASSIGNMENTNO>3</ASSIGNMENTNO>
    <MARK>60</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Thomas</STUDENTNAME>
    <ASSIGNMENTNO>1</ASSIGNMENTNO>
    <MARK>45</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Thomas</STUDENTNAME>
    <ASSIGNMENTNO>3</ASSIGNMENTNO>
    <MARK>90</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Dobbs</STUDENTNAME>
    <ASSIGNMENTNO>2</ASSIGNMENTNO>
    <MARK>12</MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Thomas</STUDENTNAME>
    <ASSIGNMENTNO>2</ASSIGNMENTNO>
    <MARK>45
    </MARK>
    </STUDENTMARK>
    <STUDENTMARK>
    <STUDENTNAME>Dobbs</STUDENTNAME>
    <ASSIGNMENTNO>3</ASSIGNMENTNO>
    <MARK>12</MARK>
    </STUDENTMARK>
    </STUDENTLIST>
    The other problem is that I have to know how many assignments there are before I create any StudentREcords object.
    Please help. I am desperate and this paper has to be finished in the next day or two.
    Thanks alot.

    You have to keep track of what the parser reads as it goes through the document. Most of the work will be done in the endElement() method, as you don't have all the information for an element until that's called. Here's a rough draft:public String currentElement;
    public StringBuffer currentElementValue;
    public String currentStudentName;
    public String currentAssignmentNo;
    public void startElement(String elementName, AttributeList al) throws SAXException
      currentElement = elementName;
      currentElementValue = new StringBuffer();
    public void endElement(String elementName) throws SAXException
      if (currentElement.equals("STUDENTNAME")
        currentStudentName = currentElementValue.toString();
        createStudentRecord(currentStudentName);
      if (currentElement.equals("ASSIGNMENTNO")
        currentAssignmentNo = currentElementValue.toString();
      if (currentElement.equals("MARK")
        addMark(currentStudentName, Integer.parseInt(currentAssignmentNo), Integer.parseInt(currentElementValue.toString());
    public void characters(char[] chars, int start, int length)throws SAXException
      currentElementValue.append(chars, start, length);
    }PC&#178;

  • Itunes help required PLEASE

    Please can anyone help? I brought an Ipod nano about a month ago and I am still unable to use this. The problem being Itunes.
    No matter what I try I get a message saying Itunes has encounted an error and needs to close.
    I have installed Quicktime standalone and this works however Itunes doesn't. I have used the suggested error finding software - this came up with nothing and also used msconfig and this has come up with nothing and Itunes still will not work.
    Any suggestions will be greatly appreciated.
    Thanks
    Dave

    hi Dave!
    okay, let's try enlisting some additional technical help with this one.
    we'll get a crash log from itunes, and send it to someone who can interpret crash logs.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    launch itunes, collect the crash log, and send it to this email address
    in the email:
    (1) state the precise version number of itunes that you're using. (right-click on your itunes icon in "C:\Program files\iTunes", select "Properties" and click on the "version" tab to doublecheck. for example, mine says "file version 6.0.4.2".)
    (2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
    love, b

  • BR* Tpols help required please

    Hi guys,
    This is Angeline Purnama, I really need your help this point
    In NW2004s PI-Server 7.0 under windows 2003
    Basically someone already setup for SAP BR*Tools setup which is i can see DB12 or DB13 view...
    Everyday it backup whole database files such as:-
    SR3.data1, SR3.data2, SR3.data3, SR3DB.data1,SR3DB.data2,SR3DB.data3,SR3DB.data4,SR3DB.data5,SR3DB.data6 etc. etc.
    Size of all files more then 1GB everyday... and it create everyday new folder name and saved all files in side of folder
    1. Question: Is that normal procedure if yes, so why not SAP just backup only updated files ?
    2. How to check what kind of tables listed in large file for example SR3.data1 or SR3DB.data1 ? where should I go in SQL statement is that table or database sigma?
    3. If I want to changed date only backup 2 or 3 days only, everyday and prevouse bacakfiles are deleted automatically, becuase I have to remove folder manualy everyday old backup folder... where should I change? in initSID file? or goto brtool and change or background job change ?
    4. Its saved some Archived logs too,  like folder names: oraarch and lot of files in it such as Arch38923.001 every extension .001 how to check thase files... or open it where they are define...
    I read help.sap.com that meke me very confouse and point out some others notes
    I belive if someone give me very nice and short answer that will be really appriciated, I know you guys very busy but take little time for me,hehehehe  thanks in Advanced
    Angeline

    Hi,
    Please find the answer of the questiones below.
    1. Question: Is that normal procedure if yes, so why not SAP just backup only updated files ?
    It all depends on what backup stratgy you followin your env.
    I think you have scheduled offline backup every day and some time in day you sap system will not be accessable.So it is tacking the backup of all the system and not the updated data.all the updated data is in the archive logs files.
    so if you have one offline backup and all the archive logs files after thet then you can restore the system.
    2. How to check what kind of tables listed in large file for example SR3.data1 or SR3DB.data1
    I dont think any specific table is backed up .in offline backup all the tables(data) are copied .
    3. If I want to changed date only backup 2 or 3 days only, everyday and prevouse bacakfiles are deleted automatically, becuase I have to remove folder manualy everyday old backup folder... where should I change? in initSID file? or goto brtool and change or background job change ?
    Please check that is there any scheduled defined in DB13 you can do it in DB 13 as we have collender there.
    4. Its saved some Archived logs too, like folder names: oraarch and lot of files in it such as Arch38923.001 every extension .001 how to check thase files... or open it where they are define...
    Archive logs are created when you are updateing or changing some thing in the database.All the archive logs thet are created are made entry in the file backSID.log.
    Thanks
    Rishi Abrol

  • First Start HELP required please.

    My new laptop is super. Now I need to switch it on. Do I do this with the cable attached and switched on or do I simply rely on battery power? Can I work on it when the cable is attached and switched on? Will this 'save' battery power?
    Please help me as I want to get going!
    Thank you,
    David

    Thank you for your help. There is one further thing. I have been removing the little plastic cap from the plug when I plug it in. Is that right or should I leave that on?
    David

  • Circular  JList . Help required please

    Folks,
    I need a bit of help please.
    I have created a JList,but I want this to be circular.
    Im my JList example,I display 11 numbers,the first 5 are displayed
    when the application starts up,the user should be able to
    press the 'Down Button'and the focus shud then go to 2.
    Once the focus reaches 5,and the user presses the Down Button,
    number 1 should scroll up and the screen shud display numbers
    2 to 6.
    The user presses the Down Button again,and the screen shud display
    3 to 7.
    This way till number 11 is reached,and when the user presses
    the 'Down' button,number 1 will be displayed.
    All shud be circular.
    Attached is my code.
    Can some please suggest what needs to be coded in the
    Down Button action performed inner class??
    Or Am I overlooking something?
    public class MyCircularList extends JPanel{
        private JList list;
        private DefaultListModel listModel;
        private JButton DownButton;
        private static final String DownString = "Down";
         public MyCircularList() {
              super(new BorderLayout());
              listModel = new DefaultListModel();
              listModel.addElement("1");
              listModel.addElement("2");
              listModel.addElement("3");
              listModel.addElement("4");
              listModel.addElement("5");
              listModel.addElement("6");
              listModel.addElement("7");
              listModel.addElement("8");
              listModel.addElement("9");
              listModel.addElement("10");
              listModel.addElement("11");
              //Create the list and put it in a scroll pane.
              list = new JList(listModel);
              list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
              list.setSelectedIndex(0);
              list.setVisibleRowCount(5);
              JScrollPane listScrollPane = new JScrollPane(list);
              DownButton = new JButton(DownString);
              DownButton.setActionCommand(DownString);
               DownButton.addActionListener(new DownListener());
               JPanel buttonPane = new JPanel();
               buttonPane.setLayout(new BoxLayout(buttonPane,                                                                                           BoxLayout.LINE_AXIS));
               buttonPane.add(DownButton);
               buttonPane.add(Box.createHorizontalStrut(5));
               buttonPane.add(new JSeparator(SwingConstants.VERTICAL));
               buttonPane.add(Box.createHorizontalStrut(5));
               buttonPane.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
               add(listScrollPane, BorderLayout.CENTER);
               add(buttonPane, BorderLayout.PAGE_END);
            // Inner class to handle Button Listener.
         class DownListener implements ActionListener {
         public void actionPerformed(ActionEvent e) {
            // How to handle the circluar motion of the list???
         }  // End of actionPerformed.
         }  // End of Inner class.
         public static void main(String[] args) {
            JFrame.setDefaultLookAndFeelDecorated(true);
         JFrame frame = new JFrame("Circular List Demo");
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         JComponent newContentPane = new MyCircularList();
         newContentPane.setOpaque(true);
         frame.setContentPane(newContentPane);
         frame.pack();
         frame.setVisible(true);          

    Since you didn't include any code in your listener, I'm not sure what you want. Perhaps:
    int n=(list.getSelectedIndex()+1)%list.size();
    list.setSelectedIndex(n);
    list.ensureIndexIsVisible(n);
    But the JList keyboard support does all this automatically?

  • Help required please on data transfer between DAW's

    Are there any Logic user/s who have moved DAW from Cakewalk to Logic and have transferred
    song data between the two applications? I have tried using OMF but my songs dont line up and go out of synch. Am I using the right file format or is there a better way to do this please?

    Disappointed about the lack of folks who, as per your requirement, converted from Cakewalk to Logic just in time so they could read your post and answer to it ? That would be a bit much, even for Earth Coincidence Control ECCO.
    Converting from one platform to another is one thing, converting from one sequencer to another is another thing, transferring audio is a third, transferring MIDI is a fourth and finally transferring all the other stuff is a fifth chapter altogether.
    Switching platforms is a relatively problem-free endeavour if you make sure there are no special characters ()"!§$%&/*+'#_-:.;,ÄÖÜäöü etc. in any of your file names. If you happen to use +Guitar(take 5):from 5'12"/ 100% wet+ as a file name, you are in trouble. Guaranteed.
    Also make sure you keep file names under 32 characters. Oh, and don't create 32-bit audio files, as these won't work in Logic.
    Logic Projects don't play in Cakewalk and vice versa, as you found out.There is no conversion standard to transfer sessions between DAWs, so you have to make do with what is there and take care of the rest yourself.
    Audio is best converted into one long Region per track, and all Regions must begin at the exact same spot, like 1.1.1.1. This way it takes 15 seconds max to line up all your audio tracks in the new software.
    MIDI can be saved as one or several SMF (standard MIDI File). Each can carry 16 MIDI channels + Tempo information.
    There is no way to transfer all what's left, that is, signature changes, take folders, playlists, audio routings, audio plugins and their settings, markers, text notes, MIDI plugins, etc. So you really need to invent a good working scheme with a writing pad and a lot of screenshots. And quite some concentration and endurance.
    Good Luck
    Christian

  • Precise bitrate of an mp3, Help required Please?

    Hello all
    i ve recently downloaded the trial of adobe audition on a firends reccomendation
    basically i have an mp3 here which is listed as a 192 now this is a podcast recording of a dj mix, but im certain the quality of this file isnt a 192 it sounds like a 96kbps to be honest
    i read somewhere a long time ago, that you can drop the mp3 into auditon and even though it is listed as a 192 in winamp/wmp etc audioin should give me the exact bitrare, regardless of what it listed as, (e.g was this a 96 and someone has conveted it to 192?)
    can anyone help me with this, how can i find/check this out in audition?
    regards
    thanks

    ceet12 wrote:
    basically i have an mp3 here which is listed as a 192 now this is a podcast recording of a dj mix, but im certain the quality of this file isnt a 192 it sounds like a 96kbps to be honest
    i read somewhere a long time ago, that you can drop the mp3 into auditon and even though it is listed as a 192 in winamp/wmp etc audioin should give me the exact bitrare, regardless of what it listed as, (e.g was this a 96 and someone has conveted it to 192?)
    If the quality of the source is lower than the quality that a particular format setting will support, then it won't sound as good as that, regardless. I don't know where you got the idea that Audition can, as if by magic, determine the previous bit rate of a re-encoded file but I can assure you that no software can do that, because that information simply isn't stored in the metadata.
    Not only that, but if you open an MP3 file in Audition, it's automatically converted to a wav file anyway. That's Audition's internal format, and the only way it's possible to open an MP3 in it. And if you resave it as an MP3, even at the same bitrate, it will be of lower quality - simply because it's been decoded and re-encoded and this isn't a lossless process. If you saved it as a higher bit rate file, then you'd still have the audio at the original decoded quality.
    Yet another problem is that you have no information at all about the original mix, or what its source files are, so even if it was recorded at a higher bit rate originally, it could still easily be flawed. For instance, if the mix was based on 128k MP3s to start with, and then podcast, re-recorded and re-opened, it would have been decoded enough times to have deteriorated significantly anyway.

  • Font Rendering Issues-Help Required Please

    In the past week, any Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are additional dots above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault but even with a clean install I am still seeing the issue. I checked my font settings and do not have any minimum font size set. I have allow pages to choose their own font ticked.
    I've uploaded an image where I can see some correctly rendered text and some gappy looking text (not from a Google search but a Mozilla query). It also happens when commenting online sometimes, during typing it will be gappy but it will show properly once submitted. Any ideas for a fix would be warmly welcomed and I can give more examples if that would help. Although it's not Firefox related, I did restore all defaults in Chrome and it didn't fix the issue there either.
    I uninstalled the most recent Windows Update since the problem is recent but it didn't change anything. I'm not sure if browsers would even look to my computers fonts.

    hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
    <blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
    <sup>reference: https://support.microsoft.com/kb/3013455</sup>
    one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases.

  • Help required please reinstalling Lightroom Licence 5 on a new Mac.

    I have purchased a new Mac & reinstalled Lightroom 5.
    However I can not find anywhere to enter my Licence No.
    The program tells me that I am on a Creative Cloud 30 day trial. 
    How can I revert to my already paid version as I can't afford to pay a monthly fee for Creative Cloud LightRoom/PhotoShop..
    Any help would be appreciated.

    Download licensed version...
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • SMTP Help Required (PLEASE)

    Hi,  I'm just online today with my new BT broadband however, I now cannot send e-mails with my old virgin SMTP server.
    I understand I need to use the BT equivalent–but there doesn't seem to be any specific information as to what those settings should be.
    This seems to be a suggestion of using your BT e-mail address and password to login/authenticate?–but although BT did send me some e-mail details (something connected to yahoo I believe) I have absolutely no interest in using that account as I have about 10 existing e-mail addresses from various companies. 
     These non-BT e-mail addresses are the ones I really need to be able to send e-mails from
     Am I going to have to use that BT address  to authenticate  in some way when I try to send e-mails?
    Any help would be much appreciated ...  I'm afraid the transition from virgin to BT has been extremely painful–no phone line for 2 weeks, now this–so far BT scoring about 0 out of 10 for customer service :-(
     sorry for being miserable but it's been a tough day!
     thanks in anticipation of any help

    colin73 wrote:
    Hi,  I'm just online today with my new BT broadband however, I now cannot send e-mails with my old virgin SMTP server.
    I understand I need to use the BT equivalent–but there doesn't seem to be any specific information as to what those settings should be.
    This seems to be a suggestion of using your BT e-mail address and password to login/authenticate?–but although BT did send me some e-mail details (something connected to yahoo I believe) I have absolutely no interest in using that account as I have about 10 existing e-mail addresses from various companies. 
     These non-BT e-mail addresses are the ones I really need to be able to send e-mails from
     Am I going to have to use that BT address  to authenticate  in some way when I try to send e-mails?
    Any help would be much appreciated ...  I'm afraid the transition from virgin to BT has been extremely painful–no phone line for 2 weeks, now this–so far BT scoring about 0 out of 10 for customer service :-(
     sorry for being miserable but it's been a tough day!
     thanks in anticipation of any help
    Hi. Welcome to the forums.
    Typically, ISP email addresses are only associated with the ISP you are connected to. So in BT's case, you do need to use a BTinternet email address to use for address authentication and use the BTinternet (well Yahoo or Critical Path) mail servers. Keith has given you the link, however that doesn't explain what to do in a mail client such as Thunderbird or Outlook. See my shortcuts (link below) option 0e for extra details.
    It is actually Virgin blocking the access to their smtp servers, rightly so to be frank as you are not connected to their systems. Receipt is unaffected.
    Although address verification works and you should be able to set up a mail client to send/receive the Virgin emails, unless Virgin offer a service that will keep that email account - it may cease in the future because you are not a customer. Strangely you will still be able to send the emails due to the verification being separate from the actual email address once verified.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

Maybe you are looking for

  • Not able to update the value in FM CRM_ORDERADM_H_MAINTAIN_OW

    hi,      Here i am updating the data in below format. during exection showing the error msg an exception error occured during input processing........pls confirm ls_orderadm_h-guid                = lv_object_guid. "LV_HEADER_GUID.     ls_orderadm_h-z

  • ADF Application on Windows Desktop Client

    Hi, I developed a small ADF Web Application and tested it on Integrated Web logic server. Is there a way by which I can make this program to run stand alone on a client PC with out Web logic server (In the same way as Forms 6i runs on 2 tier mode in

  • PASS DATE as parameter

    Hi all, I have a mapping which i need to pass in 2 DATE parameters, i try in OWB with TO_DATE('1-Jan-1990') and TO_DATE('1-Jan-2010') and i get result as my expected. But when i try to run the mapping sqlplus with following statement, I get differenc

  • How to set httponly cookies in J2EE 5

    Hi folks, I ma using Tomcat 6 which implements Servlet API 2.5 (part of the J2EE 5). I know I could set the usehttponly="true" in the context.xml to turn on all cookies to httponly. However, if I only need to set certain cookies to be httponly, how t

  • Wiki system errors

    In the latest days, I often recieve error messages, when I try to use the wiki. Things like lib/DbaDatabase.php:54: Fatal[256]: dba_open(/home/judd/public_html/db/wiki_pagedb.gdbm,w): Driver initialization failed for handler: gdbm: Can't be writer *