8800GT and 7300G as second card ?

I am hoping to get the new 8800gt for the older mac pro but want to keep my second monitor on a 7300gt (I currently have 2 7300 in the computer) ... Can I just pop the fist card out and put the 8800 in and just keep the second 7300 running my second monitor or is this a no no ????
Thanks

I have a September 2006 macPro (Quad 3Ghz, 8Gb). I do alot of Photoshop, and HiDef (AVCHD) work in iMovie 08. My MacPro came with the Nvidia 7300 GT. I wondering if the 8800 would make a difference for me? I am especially hopeful for a performance boost in Imovie 08 with the HiDef video files, which are painfully slow in the current configuration.

Similar Messages

  • I want to download pse 11 to a second laptop but have no serial number and have lost prepaid card

    I have pse 11 on an old laptop I have no serial number and have lost prepaid card how do I install on new laptop

    SiJohn if you registered your serial number under your account then it will be available at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • Dual Radeon video card -- Second card Unknown/4th monitor

    My initial plan was to use four monitors on my Radeon HD 6790 as follows:
    1 Single-link DVI-D = monitor1 dvi
    1 Dual-link DVI-I = monitor2 dvi
    1 Display Port = monitor3 dvi with adapter
    1 HDMI = new monitor
    This did not work as I could not use the hdmi port with the second dvi plugged in so I decided to buy a second cheaper ati card (the 6450) to power the fourth monitor. Well of course that did not work as well since the 2nd video card was identified as UNKNOWN via the Ctalyst control Center(amdcccle).
    This is how I currently have my monitors plugged in:
    6790 (Main card):
      1x dvi
      1x dvi via DisplayPort
      1x hdmi
    6450 (Secondary card):
      1x dvi
    I tried for two days to get the second card identified by the Catalyst driver and I ended up borking my system in the process. So now I am on week two of getting this setup to work with no avail so I decided to post a new thread.
    Here is some relevant information that may help:
    ╔═ comhack@Cerberus 11:14 AM
    ╚═══ ~-> uname -a
    Linux Cerberus 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64 GNU/Linux
    ╔═ comhack@Cerberus 10:50 AM
    ╚═══ ~-> lspci | grep VGA
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts LE [AMD Radeon HD 6700 Series]
    02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6450]
    ╔═ comhack@Cerberus 11:50 AM
    ╚═══ ~-> pacman -Qi xorg-server | grep Version
    Version : 1.11.4-1
    ╔═ comhack@Cerberus 10:50 AM
    ╚═══ ~-> xrandr
    Screen 0: minimum 320 x 200, current 5440 x 1084, maximum 5440 x 1920
    DFP1 connected 1600x900+3840+0 (normal left inverted right x axis y axis) 443mm x 249mm
    1600x900 60.0*+
    1440x900 60.0
    1280x800 59.8
    1152x864 75.0 60.0
    1280x768 59.8
    1280x720 60.0
    1024x768 75.0 70.1 60.0
    800x600 72.2 75.0 60.3 56.2
    640x480 75.0 72.8 67.0 59.9
    DFP2 disconnected (normal left inverted right x axis y axis)
    DFP3 disconnected (normal left inverted right x axis y axis)
    DFP4 disconnected (normal left inverted right x axis y axis)
    DFP5 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 520mm x 290mm
    1920x1080 60.0*+ 50.0 59.9 30.0 25.0 30.0
    1600x1200 60.0
    1776x1000 50.0 59.9 25.0 30.0
    1680x1050 50.0 60.0
    1400x1050 50.0 60.0
    1600x900 60.0 50.0
    1360x1024 50.0 60.0
    1280x1024 50.0 75.0 60.0
    1440x900 50.0 59.9
    1280x960 50.0 60.0
    1152x864 50.0 59.9 75.0
    1280x768 50.0 60.0
    1280x720 60.0 50.0 59.9
    1024x768 50.0 75.0 70.1 60.0
    1152x648 50.0 59.9
    800x600 50.0 72.2 75.0 60.3 56.2
    720x480 50.0 30.0 60.0 30.0 59.9
    640x480 50.0 75.0 72.8 67.0 60.0 59.9
    DFP6 disconnected (normal left inverted right x axis y axis)
    DFP7 connected 1920x1080+0+4 (normal left inverted right x axis y axis) 477mm x 268mm
    1920x1080 60.0*+
    1680x1050 60.0
    1400x1050 60.0
    1600x900 60.0
    1360x1024 60.0
    1280x1024 75.0 60.0
    1440x900 59.9
    1280x960 60.0
    1280x768 60.0
    1280x720 60.0
    1024x768 75.0 70.1 60.0
    800x600 72.2 75.0 60.3 56.2
    640x480 75.0 72.8 67.0 59.9
    CRT1 disconnected (normal left inverted right x axis y axis)
    ╔═ comhack@Cerberus 11:02 AM
    ╚═══ ~/Cerberus-> pacman -Qi catalyst-total | grep Version
    Version : 12.4-1
    Here is my atisysteminfo: https://github.com/securitybreach/Cerbe … report.txt
    My xorg.conf:
    Section "ServerLayout"
    Identifier "amdcccle Layout"
    Screen 0 "amdcccle-Screen[1]-0" 0 0
    EndSection
    Section "Monitor"
    Identifier "0-DFP1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1600x900"
    Option "TargetRefresh" "60"
    Option "Position" "3840 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP5"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "1920 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP7"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 28"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "1-Default monitor"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "480x640"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" ""
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP6"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[1]-0"
    Driver "fglrx"
    Option "Monitor-DFP1" "0-DFP1"
    Option "Monitor-DFP5" "0-DFP5"
    Option "Monitor-DFP6" "0-DFP6"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[2]-0"
    Driver "fglrx"
    Option "Monitor-Default monitor" "1-Default monitor"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[1]-0"
    Device "amdcccle-Device[1]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Virtual 5440 1920
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[2]-0"
    Device "amdcccle-Device[2]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    https://github.com/securitybreach/Cerbe … g.conf-ati
    Notice the fourth monitor is labeled as "1-Default monitor" instead of hdmi (or whatever) and the second card is not listed.
    I am literally at my wit's end trying to figure this out. So basically I am wondering if anyone has a clue where to begin trying to get the 2nd video card identified or is it even possible with the current Catalyst driver? I know my hardware can power it fine as it works perfectly on my Windows gaming partition.
    Thanks in advance
    Last edited by securitybreach (2012-06-01 16:50:47)

    I have it working now using catalyst-total but with separate X sessions on each monitor. Not the ideal setup but it works for now.
    Here is my xorg.conf for reference:
    Section "ServerLayout"
    Identifier "amdcccle Layout"
    Screen 0 "amdcccle-Screen[1]-0" 1599 0
    Screen "amdcccle-Screen[1]-1" 3518 0
    Screen "amdcccle-Screen[1]-2" 5437 0
    Screen "amdcccle-Screen[2]-0" 0 0
    EndSection
    Section "Monitor"
    Identifier "0-DFP1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1600x900"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP5"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP7"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "1-DFP2"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1600x900"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[1]-0"
    Driver "fglrx"
    Option "Monitor-DFP5" "0-DFP5"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[2]-0"
    Driver "fglrx"
    Option "Monitor-DFP2" "1-DFP2"
    BusID "PCI:2:0:0"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[1]-1"
    Driver "fglrx"
    Option "Monitor-DFP7" "0-DFP7"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[1]-2"
    Driver "fglrx"
    Option "Monitor-DFP1" "0-DFP1"
    BusID "PCI:1:0:0"
    Screen 2
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[1]-0"
    Device "amdcccle-Device[1]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[2]-0"
    Device "amdcccle-Device[2]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[1]-1"
    Device "amdcccle-Device[1]-1"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[1]-2"
    Device "amdcccle-Device[1]-2"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I had to manually edit my xorg.conf and add the values for the second video card/fourth monitor. I cannot figure out how to take a screenshot of all 4 X sessions so here is a picture of the setup:
    Last edited by securitybreach (2012-06-03 22:49:20)

  • HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any sugg

    I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any suggestions

    If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
    Best of luck.

  • Mac Pro Nvidia 8800GT and snow leopard 10.6.4  problems

    I have a Mac pro 1.1 with a Nvidia 8800GT and I have having a lot of problems since update to snow leopard latest release. My computer start to show lines and giggle with lines static and then freeze, it make so bad that you can't do anything even restart the computer does not solve the problem. I have reset the pram and all possible solution available. Maybe the video card is going to die soon?

    My MacPro 3.1 with Nvidia 8800 Gt is also not HP.
    Initially I was getting some video glitches just after start up but then the machine would settle down and run for the session.
    about a week ago the situation got increasingly worse so that from last Sat morning its will not even boot up 4 times out of 5 tries.
    Gets to the apple symbol then freezes
    I've tried booting from the snow leopard install disc but even then its freezes and I see many video artifacts.
    I've ordered a ATi Radeon 4870 to replace the graphics card as I thought that might be the issue. The 8800 GT was full of fluff I feared it had cooked itself this summer.
    But now I'm concerned from reading several forum topics that a recent OSX update has effectively killed machines with the 8800 Gt card.
    I can't really operate fully without my macpro as that where most of the software is held. CS5 master suite etc
    My business partner did say just get another machine but i'm not happy to go down that route just yet. Yes of course a 12 core is tempting but at ££££.££ cost.
    lucky I have my Macbook pro to use otehrwise i'd be

  • Drag and Drop Problem in Card Game

    Hi, everyone,
    I'm trying to adapt the memory game in chapter 3 of the book "ActionScript 3.0 Game Programming University" for my own uses. I want to get all of the cards to flip and drag. I am able to flip the first card and drag it, but when I flip the second card over, I can't drag it. I have two files, MatchingGameMe.fla and MatchingGameMe.as. All of the actionscript is in MatchingGameMe.as. Here is the code. Does anyone see how I can modify it so that all the cards drag? Thanks in advance for your help!
    MemoryGameMe.as:
    package {
    import flash.display.*;
    import flash.events.*;
    public class MatchingGameMe extends MovieClip {
      // game constants
      private static const boardWidth:uint = 6;
      private static const boardHeight:uint = 6;
      private static const boardOffsetX:Number = 120;
      private static const boardOffsetY:Number = 45;
      private var firstCard:Card;
      private var secondCard:Card;
      public function MatchingGameMe():void {
       // make a list of card numbers
       var cardlist:Array = new Array();
       for(var i:uint=0;i<boardWidth*boardHeight/2;i++) {
        cardlist.push(i);
        cardlist.push(i);
       // create all the cards, position them, and assign a randomcard face to each
       for(var x:uint=0;x<boardWidth;x++) { // horizontal
        for(var y:uint=0;y<boardHeight;y++) { // vertical
         var c:Card = new Card(); // copy the movie clip
         c.stop(); // stop on first frame
         var r:uint = Math.floor(Math.random()*cardlist.length); // get a random face
         c.cardface = cardlist[r]; // assign face to card
         cardlist.splice(r,1); // remove face from list
         c.addEventListener(MouseEvent.CLICK,clickCard); // have it listen for clicks
         addChild(c); // show the card
       // This function is called when the mouse button is pressed.
       function startDragging(event:MouseEvent):void
            c.startDrag();
        // This function is called when the mouse button is released.
        function stopDragging(event:MouseEvent):void
           c.stopDrag();
       c.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
       c.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
      // player clicked on a card
      public function clickCard(event:MouseEvent) {
       var thisCard:Card = (event.target as Card); // what card?
        firstCard = thisCard; // note it
        firstCard.gotoAndStop(thisCard.cardface+2); // turn it over

    Not sure if this will work inside classes, but in working with AS3, this would issue the command to object you just clicked, and the object you just dropped:
    // This function is called when the mouse button is pressed.
       function startDragging(event:MouseEvent):void
            event.currentTarget.startDrag();
        // This function is called when the mouse button is released.
        function stopDragging(event:MouseEvent):void
           event.currentTarget.stopDrag();

  • Sleep issue and USB 2.0 card

    I recently installed an Allego 2.0 USB card, recommended by Apple, into my G4 1.25 Dual. The card works great but now I cannot put the computer to sleep. Whether by button or command the monitor goes dark but the G4 is still awake plus I can't bring it back without a cold boot. Tech support said this was an issue, offered some tips and said if all fails get a different card. I bought Iomega's as an experiement and same problem! Anybody else have this issue and could you solve it?
    Thanks.
    Bill

    Hi Joe,
    Yes, my mac usually sleeps just fine. My own sleep is another issue but that is for another forum.
    A couple of years ago I was on another forum and saw a post claiming a fully functional usb2 card for $9. I bought it and it worked slick as could be. It was a no name, no box, no instructions, bare card but the price was good and it came with a usb2 cable. I then posted as many times as I could to others about that site and the card. About a year later the link broke and I went back to the site. The had a card that looked the same, had the same chipset, and was the same price but the manufacturer had changed some components. The second card did not work as well as the first.
    Since then the same thing has happened to all of the makers of usb 2 cards. Something on the card changes and breaks sleep. It's not your fault. It's not the vendor's fault, it is the manufacturers fault. By the way, the manufacturers are usually not the name you see on the box. Companies buy from a manufacturer and slap their lable on the box.
    Keep trying and you will eventually find one.
    One guy went so far as to pay Belkin extra money for one of the older cards but it worked.

  • How to disable and enable a Hardware Card on my Mac

    Hi all,
    I have a system with2 BlackMagicDesign (BMD) Decklink cards in it. One HD Extreme and one HD Extreme 3D+ card.
    I use it to capture multiple video streams at once and it works perfectly. I can choose to input and output card for audio, etc...
    But I have software that can use a BMD Decklink card as 3th monitor or VideoOut Monitor.
    That software always chooses the HD Extreme Card, and I cant choose it manually...
    I need the software to use the Decklink 3D+ card (because it has a HDMI 1.4 out and works in Stereo3D)
    If I remove the second card, all works perfectly, but I want to avoid to do that...
    In Windows you can easily disable hardware....
    But, can we do that in MacOSX 10.7??
    thx for your hrlp,
    Steven.

    Don't know if this will work for your specific setup or not, but SwitchResX is a unique utility for controlling video configurations (including enabling/disabling multiple monitors).

  • Use the same inquiry for a second card?

    It is a YMMV thing.  Some have reported getting away with it with others reporting fresh pulls for the new card.  

    tuolumne wrote:
    sergiulucian88 wrote:
    Is it possible to use the same inquiry with Cap One to obtain a second card on the same day? Just got approved for a Venture and it would be nice to squeeze another card out of the same inquiry. My AAA is already xx and I can't think of any other reason not to. Thanks in advance!It's not unheard of but as with any anomaly I would not count on it. Expect 3 hard pulls per card. Rejoice when when it's 3 for one pair.I applied for the Capital one GM power card and got approved. Got declined for the Cap QS few minutes later and didn't get any alerts from TU for another HP

  • Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar

    Hello to you
    I have download game apps fifa 2014 from the app store of windows 8.1 32x  on my laptop.
     However, the game started to the mane screen and stopped suddenly.
     The window of the game minimized to the manager toolbar on desktop and win I click on it the game work from the beginning and stopped like the first time and didn't work  
    Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar  
       System Information Report
    عام        
                    نظام التشغيل        Microsoft Windows 8.1 Pro
                    المعالج المركزي        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                    اسم المستخدم        amjad
    العرض        
                    وصلة الفيديو        Intel(R) HD Graphics 3000
                    ذاكرة الفيديو        1.15 GB
                    دقة الشاشة        1366 x 768
    التخزين        
                    إجمالي الذاكرة        2.67 GB
                    الذاكرة الحرة        1.05 GB
                    مساحة القرص الصلب        296.54 GB
                    المساحة الحرة        176.65 GB
    I/O        
                    الفأرة        Samsung PS/2 Port Input Device
                    لوحة المفاتيح        Standard PS/2 Keyboard
    نظام الكمبيوتر        
                    اسم الكمبيوتر        SUMSUNG-I3
                    اسم المستخدم        [email protected]
                    المنظمة        N/A
    نظام التشغيل        
                    اسم نظام التشغيل        Microsoft Windows 8.1 Pro
                    إصدار نظام التشغيل        6.3.9600
                    معرّف المنتج        00261-50000-00000-AA602
                    وقت تشغيل النظام        17/06/2014 23:34:21
                    إصدار الأنترنت إكسبلورر        11.0.9600.17126
                    DirectX إصدار        DirectX 11
                    OpenGL إصدار        6.3.9600.16384 (winblue_rtm.130821-1623)
    الريجستري        
                    أقصى حجم        682 MB
                    الحجم الحالي        104 MB
                    الحالة        OK
    المعالج المركزي        
                    اسم المعالج        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                    اسم الكود        N/A
                    المنتج        GenuineIntel
                    السرعة الحالية        2200 Mhz
                    أقصى سرعة        2200 Mhz
                    Voltage        1.2V
                    الساعة الخارجية        100 Mhz
                    الرقم التسلسل        BFEBFBFF000206A7
                    معرّف المعالج        x64 Family 6 Model 42 Stepping 7
                    مأخذ التوصيل        CPU
                    L1-Cache        64 KB
                    L2-Cache        256 KB
                    L3-Cache        3072 KB
    اللوحة الأم        
                    الطراز        300E4A/300E5A/300E7A
                    المنتج        SAMSUNG ELECTRONICS CO., LTD.
                    الرقم التسلسل        123490EN400015
                    BIOS اسم        Phoenix SecureCore-Tiano(tm) NB Version 2.1 01QA
                    BIOS منتج        Phoenix Technologies Ltd.
                    SMBIOS إصدار        01QA
                    BIOS تاريخ        05/09/2011
    BIOS ميزات        
                    PCI is supported        نعم
                    BIOS is Upgradable (Flash)        نعم
                    BIOS shadowing is allowed        نعم
                    Boot from CD is supported        نعم
                    Selectable Boot is supported        نعم
                    EDD (Enhanced Disk Drive) Specification is supported        نعم
                    Int 5h, Print Screen Service is supported        نعم
                    Int 9h, 8042 Keyboard services are supported        نعم
                    Int 14h, Serial Services are supported        نعم
                    Int 17h, printer services are supported        نعم
                    Int 10h, CGA/Mono Video Services are supported        نعم
                    NEC PC-98        نعم
                    ACPI supported        نعم
                    USB Legacy is supported        نعم
    مورد الذاكرة        
                    إجمالي الذاكرة        2.67 GB
                    الذاكرة المستخدمة        1.62 GB
                    الذاكرة الحرة        1.05 GB
                    استخدام الذاكرة        60%
    الذاكرة الفعلية        
                    صرف الذاكرة        BANK 0
                    الوصف        Physical Memory 0
                    محدد الجهاز        ChannelA-DIMM0
                    المساحة        2.00 GB
                    السرعة        1333 Mhz
                    المنتج        Hynix/Hyundai
                    عرض البيانات        64 bit
                    نوع الذاكرة        Unknown
                    عامل النموذج        SODIMM
    الذاكرة الفعلية        
                    صرف الذاكرة        BANK 2
                    الوصف        Physical Memory 2
                    محدد الجهاز        ChannelB-DIMM0
                    المساحة        2.00 GB
                    السرعة        1333 Mhz
                    المنتج        Hynix/Hyundai
                    عرض البيانات        64 bit
                    نوع الذاكرة        Unknown
                    عامل النموذج        SODIMM
    الأقراص الصلبة        
                    الاسم        SAMSUNG HM321HI
                    نوع الوسائط        Fixed hard disk media
                    الحجم الكلي        298.09 GB
                    نوع الواجهة        IDE
                    عدد الأقراص        3
                    إجمالي الأسطوانات        38913
                    إجمالي الكليّة        255
                    إجمالي القطاعات        625137345
                    مجموع المسارات        9922815
                    المسارات لكل اسطوانة        255
                    بايت لكل قطاع        512
                    قطاعات لكل مسار        63
                    S.M.A.R.T دعم        نعم
                    درجة الحرارة الحالية        0C (32F)
    CD-ROM Drive        
                    الاسم        TSSTcorp CDDVDW SN-208BB
                    القرص        E:
                    معدل النقل        -1
                    الحالة        OK
    IDE تحكم        
                    الاسم        Standard SATA AHCI Controller
                    المنتج        Standard SATA AHCI Controller
                    الحالة        OK
    وصلة الفيديو        
                    الاسم        Intel(R) HD Graphics 3000
                    معالج فيديو        Intel(R) HD Graphics Family
                    المنتج        Intel Corporation
                    فيديو فن العمارة        VGA
                    DAC نوع        Internal
                    حجم الذاكرة        1.15 GB
                    نوع الذاكرة        Unknown
                    وضع الفيديو        1366 x 768 x 4294967296 colors
                    معدل التحديث الحالي        60 Hz
                    إصدار التعريف        9.17.10.3347
                    سجل الأحداث        29/01/2014
    جهاز العرض        
                    الاسم        Generic PnP Monitor
                    ارتفاع الشاشة        768
                    عرض الشاشة        1366
                    الحالة        OK
    Ethernet        
                    اسم المنتج        Realtek PCIe GBE Family Controller
                    اسم الخدمة        RTL8168
                    المنتج        Realtek
                    MAC عنوان        NULL
    Wi-Fi        
                    اسم المنتج        Intel(R) Centrino(R) Wireless-N 130
                    اسم الخدمة        NETwNs32
                    المنتج        Intel Corporation
                    MAC عنوان        DC:A9:71:7A:A9:3B
    Local Area Connection        
                    اسم المنتج        TAP-Windows Adapter V9
                    اسم الخدمة        tap0901
                    المنتج        TAP-Windows Provider V9
                    MAC عنوان        NULL
    أجهزة الصوت        
                    الاسم        صوت الشاشة من Intel(R)‎‎‎
                    المنتج        Intel(R) Corporation
                    الحالة        OK
    الفأرة        
                    الاسم        Samsung PS/2 Port Input Device
                    المنتج        ELAN
                    الأزرار        0
                    الحالة        OK
    لوحة المفاتيح        
                    الاسم        Standard PS/2 Keyboard
                    الوصف        Enhanced (101- or 102-key)
                    وظائف المفاتيح        12
                    الحالة        OK
    USB أداة تحكم        
                    اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
                    المنتج        Intel
                    بروتوكول معتمد        Universal Serial Bus
                    الحالة        OK
    USB أداة تحكم        
                    اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
                    المنتج        Intel
                    بروتوكول معتمد        Universal Serial Bus
                    الحالة        OK

    http://apps.microsoft.com/windows/en-us/app/fifa-14/e89c9ccf-de94-45ed-9cd4-7e11d05c3da4
    System requirements
    OS: Windows 8
    CPU:  1.8G core2duo
    RAM: 1G
    GPU: NVidia card 7800 GT+ with 512M+ vram
    This game is not fully optimized to work with some ATI GPU cards.
    Keyboard support is not available.
    try to contact game manufactured, maybe your GPU doesn't meet requirement

  • Every video or podcast stops and starts every second

    Any help would be appreiciated, using Chrome, Windows XP Pro with SP3, Pentium 4 2.4GHz, with 2GB Ram, with Nvidia Gforce 5200 video card! Too old a system??

    hi, all three are pretty much the same, and its not a buffering issue. I hav Verizon Fios and had a WUGNET speed test show download speed being 11.3 Mbps and upload of 1.24. It was possible the Html was slightly better but not by much.
    Jim
    Date: Thu, 25 Oct 2012 15:22:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: Every video or podcast stops and starts every second
        Re: Every video or podcast stops and starts every second
        created by Chris Campbell in Using Flash Player - View the full discussion
    That should be fine for system specs.  My first guess would be network bandwidth issues.  Does it seem like the video/audio buffers fast enough or does the buffer continue to run out when the item is played? Try these two links out, do either of them play better? HTML5 videoNon-HTML5 video Thanks,Chris
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4801142#4801142
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4801142#4801142
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4801142#4801142. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Using Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • H8-1280t and GTX 780 Video Card installation issue.

    I hope someone can give me good news with this issue as I am at the end of my rope.
    I recently purchased an EVGA GTX 780 SC video card which I am attempting to install into my h8-1280t Elite HP Desktop.  
    I have switched out the stock Power Supply that originally came with the unit and installed one that can support the necessary power requirements of the card (750W with 61A on 12V rail [Corsair ATX 750).
    This is actually the second card that I have tried and they both have the same issue.  The issue is as follows:  When the unit is powered on I can see the POST message which shows my processor, memory amount, and BIOS Revision date and version.  The unit will then proceed to beep once every 10 seconds, there will be a total of 3 beeps and the unit proceeds to a black screen where nothing happens.  I know the card is not bad as it displays the POST message just fine.  
    I have since contacted EVGA the manufacturer of the card and they have stated that this issue has something to do with UEFI BIOS.  Their card has shipped with the most recently updated UEFI BIOS located in the GTX 780, I was referred to try and ask here if there is an update to my current motherboard to bring it upto date with the latest revision of UEFI.  I have also since tried both BIOS updates on my model page the lastest having a revision date of 9-12-2012.  I would hate to think that my unit is incompatible being that I only bought it last year.  I have noticed that in my BIOS settings there is very limited UEFI boot options. so that gives me some hope.
    The following is the information about my unit to the closes detail I have found:
    Motherboard: IPIWB-PB (http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03132964) 
    BIOS: 7.15 Rev. A (09-12-2012)
    Processor: Intel i7 3820 3.6ghz
    Desktop: h8-1280t (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5155...)
    Power Supply: Corsair ATX 750w
    Memory: Corsair 16gb Vengeance
    Hard Drive and CD drive are stock.
    I believe the issue lies with an outdated BIOS and hopefully HP is providing BIOS updates.
    Once again any help would be greatly appreciated!  

    Hi,
    Have you made sure that your P6 and P8 connectors are connected properly to the video card?
    If you have, and your power supply is capable of running this card, then it is possibly not compatible with this motherboard. For the greatest chance of compatibility, since your motherboard has PCIe generation 2 slot you would want to look for a video card that uses PCIe generation 2.0. While 3.0 should be backwards compatible; it is not always the case.
    Thank you.
    I worked on behalf of HP

  • MSI Twin Frozr II Second card failure

    hi guys, got the above card RMA'd replaced 3 months ago and now I have the exact same issues with the screen scattering, lines, blocks etc, just like before.
    Have stripped mobo down to bare minimums and still the same.
    Have an OCZ600SXS psu with 18A on the +12v rail that supplies the card.
    I have heard that some OCZ supplies have issues but, as it worked fine for 3 months, I cannot see it being the PSU
    Is this looking like yet another RMA to MSI?
    thanks, Gordie

    test the card in another computer who has different and more powerfull PSU
    Quote
    MSI Twin Frozr II Second card failure
    what card exactly?

  • Why my iphone 5s voice mail answer call first and my iphone second.

    why my iphone 5s voice mail answer call first and my iphone second.

    Hello celazopdef,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning cellular issues:
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/kb/TS3406
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How do i use my itunes gift card money and not my credit card

    How do i use my itunes gift card money and not my credit card
    My ipod told me that i had to put in a credit card and because of that i put in my moms wit her permission. but the thing is i do not want to use the money on her credit card. i hav a 10 dollar itunes gift card in it already and none of it is used up. i want to use that money
    how do i do it

    Open iTunes on your computer. In the iTunes Store log into your iTunes Store account and view your account. Select Edit Payment Information. In the credit card choices I would choose None. That will remove your Mom's CC info. Next under iTunes Gift Cards and Certificates click the little arrow to redeem your Gift Card. Then follow the instrction to redeem your GC.
    You can also do this on your iPod, but it is more complicated to describe how to do it and to actually do it. It is easier to do in the iTunes on your computer.

Maybe you are looking for