880GM-E43 (AMD/AM3) Topic was Removed by Stu

A message was posted but sjay, but deleted by Stu.
Was this about Windows7x64 bitlocker compatibility with 880GM-E43?
Who knows Why?  I don't know, can't send Msgs to Stu....
Sjay,
What's up?  Can you post under the following if you had useful info deleted by Stu?  
https://forum-en.msi.com/index.php?topic=147916.msg1100027#msg1100027
Thanks

Stu removed your other topic because you already have a topic started on the same subject.
For what it's worth, Sjay said this:
Quote
I haven't verified anything because I don't have the resources or the board, but I can tell you that if you connect the TPM cabling it would probably work. My board (GMA-E-55) has a TPM wire/cable connection, I just have no idea of its usage.
Refer to your manual.
Please only post in the other topic. I will lock this topic now.

Similar Messages

  • Was AMD Radeon GPU compatibility removed in CS6?

    I was wondering...
    I checked out the AE CS6 trial and noticed that I cannot use my GPU whereas in CS5.5 I was able to.
    I'm using an AMD Radeon HD 6950 2GB and CS6 tells me the GPU is either not available or has an incompatible device or display driver.
    I've the latest drivers for my graphics card so I don't think it's the latter.
    Was AMD Radeon GPU compatibility removed in favor of NVIDIA or is the whole OpenGL part of AE gone?

    Raytracing is the only GPU related option I could find in the Previews part of the Preferences window, inside the "GPU Information" pop-up.
    Also, in "Display", "Hardware Accelerate Composition, Layer, and Footage Panels" is greyed out, I can't tick/enable it.
    The lightning bolt (Fast Previews) button doesn't show OpenGL related options either.
    Running on Windows 7 64 bit.
    Kyle
    Edit: thanks for trying to help me out!
    Message was edited by: Kyle Broflov

  • 880GM-E43 won't power on

    I built this system about 6 months ago.  880-GM-E43, AMD Phenom II 1055T Hex core.  Was running fine and then in the middle of working just powered off.  At first I thought power Supply so tested that, it's OK.  I can hook everything up and power is fine, except when I plug the 4-Wire CPU power to the MB, It will not power on then.  Did my CPU Fry??  If so, what would be a good replacement?  I don't need the Hex Core, it was just bundled in with the "Put together yourself" kit from Newegg.

    Quote from: georgetaylor on 14-February-12, 05:11:53
    I built this system about 6 months ago.  880-GM-E43, AMD Phenom II 1055T Hex core.  Was running fine and then in the middle of working just powered off.  At first I thought power Supply so tested that, it's OK.  I can hook everything up and power is fine, except when I plug the 4-Wire CPU power to the MB, It will not power on then.  Did my CPU Fry??  If so, what would be a good replacement?  I don't need the Hex Core, it was just bundled in with the "Put together yourself" kit from Newegg.
    Guess I didn't give enough info, so here is more:
    Rosewill R519 Black Computer case with 500 Watt Power Supply
    MSI 880GM-E43 AM3  AMD 880G HDMI Micro ATX AMD Motherboard
    AMD Phenom II 1055T Thuban 2.8GHZ Socket AM3 125W Six-Core Desktop Processor
    4GB (2x2GB) 240-Pin DDR3 SDRAM 1600 Dual Channel Memory
    Seagate Barracuda ST31000524AS 1TB 7200 RPM SATA Drive
    LITE-ON CD/DVD Burner SATA

  • 880GM-E43 - What is the "real" maximum memory for this mobo?

    Hi,
    I have a system that I built awhile ago that uses the 880GM-E43 mobo.  At the time that I built this system, everything that I found indicated that the max memory was 16GB (4 x 4GB), which is what I have installed now.
    I've been wanting to have more memory (lots of VMware guests), so I've been starting to look at building a new system, which I thought would have required a different mobo that supports 32GB (4 x 8GB) and a new set of 8GB memory sticks.
    While I was researching that, I found this:
    http://www.msi.com/product/mb/880GM-E43.html
    and under the Specifications tab, it says:
    Code: [Select]
    DDR3 Memory DDR3 800/1066/1333/1600*(OC)
    DDR2 Memory N/A
    Memory Channel Dual
    DIMM Slots 4
    Max Memory (GB) 32 
    Everywhere else, other than the MSI website itself, still seems to say "16GB" max.
    Does anyone know which maximum is correct?  Is it 16GB, or is it 32GB?
    Please advise.
    Thanks,
    Jim

    Quote from: Bas on 02-January-12, 23:48:42
    It's only limited to what the CPU can handle, and that is far more then you can buy at this time
    However, MSI only tested at the time of production of the board.
    So if you use bigger modules you have to test yourself if it works with your CPU, the board got nothing to do with it.
    What ever you do, don't mix sizes and brands, often goes wrong.
    Bas,
    Not doubting what you said, but I hope that's the case.  Will post back as soon as it gets in and I get a chance to test it.  As you suggested, I'll initially remove the 4x4GB sticks, and replace them with the new 2x8GB sticks, and see how that works.  If it that works, I'll put in the additional 2x4GB (understood what you said, but this is interim).
    Then, if that works, I can wait for maybe prices to drop to get an additional 2x8GB kit, but going to 24GB will help a lot with the work that I'm doing (mostly Vmware guests).
    Jim

  • Temp problem with 880gm-e43

    Hey
    I have been having a problem with a new build of an 880gm-e43/athlon II 640 quad core.
    I haven't been able to get the temps or voltages to read correctly in any monitoring software. Bios temps have read 24-28c, 12v volts 12.28, while software in vista temps have been reading 6c-18c and 12v has been reading 4-5 volts. I have tried amd overdrive, hwmonitor, speedfan, core temp, etc all saying the same thing. I am running;
    msi 880gm-e43
    athlon 640 x4
    corsair 520 watt ps
    wd 250 gb drive
    Win Vista 32
    Kingston DDR3 1333 ram, 2gb
    I have turned off acc, green power, amd cool and quiet, changed a large number of settings, but this still remains. I have updated to cat 10.10, added the sb drivers, and I have also updated the bios from v 2.9 to v 2.a via live update, reset all bios settings to optimized, then reset to turning off acc, green power, but have cool and quiet on again. I also have the cpu fan set to 25% now, and sys fan to 50%.
    I am at a loss as to the error on temps. Any help would be appreciated
    Thanks
    PS: Also one question as to Bios updates. I didn't see any listed for manual download under 880gm-e43, it just gave the link for live update. Other motherboards have bios listed for them for manual download. just wondering....

    well, been looking elsewhere for the problem
    Fredrik said
    Vista can not handle other companies' auto-starting programs (very well). That end is where I believe you should look for solutions.
    So what you are saying is that Vista is the reason why I can't get anything to monitor accurately? Or is it that having the progs autostart is the problem? Because I have vista running on an older am2 msi board and reading temps/volts/etc properly. I am manually starting the programs after boot and log in and the drivers associated with them seem to be loaded when necessary. So the OS in and of itself doesn't seem to be the issue exactly. It just seems as if something isn't communicating the info properly to the utilities that should be reading it, or they are reading the info given incorrectly. I guess what is puzzling is that there aren't any other comments by other 880gm-e43 owners with this problem so I wondered if it was something particular to my set up, or is this something that will be solved in future updates of software, or is it something else...

  • Msi 880GM-E43 can't overclock my ram

    My Computer Spec:
    880GM-E43 BIOS 2.11, Sempron 140/Sempron 145(Unlock)/Athlon X2 5200(Unlock), Windows 7 Home Premium 32 bit
    Super Talent WB160UB2G8 (Default: 1600MHz CL8-8-8-24-36 1T)*
    Corsair HX850W +12V~70A, +5V~25A, +3.3V~25A
    Galaxy GTS250 1GB
    WD Caviar Blue WD6400AAKS 640GB 16 MB cache SATA 2.0
    ASUS DVD/CD R-W
    * This ram cannot find on SuperTalent offical webpage.
    Bios show "cmos checksum bad" when I overclock my Ram(1600MHz CL8-8-8-24-36 1T change to 1600MHz CL7-8-8-24-36 1T or 1600MHz CL7-8-7-24-36 1T etc.)
    This ram maybe use ELPIDA BDBG ram chips(find from internet)

    Got the same probs as you mate. Can't push my 3000+ much higher than 208mhz FSB either, it just resets and sometimes throw up errors when i try.
    My specs are as follows;
    AMD64 3000+ (Stock cooler)
    2x512 Geil Value pc3200 RAM
    K8N NEo Platinum
    2x 80gig Maxtor SATA (RAID 0)
    ATI 9800pro
    Temp was really high (idle 49, load 59!) when i first got it but after changing to the 1.4 bios i get idle 36, load 45 now.
    Strangely my system is not set at 200mhz FSB by default. When i try to go to default FSB or try 200Mhz FSB it sets to 201Mhz instead so my system is at 2010Mhz, I cant get 200Mhz bus! At this setting its really 'jumpy' when playing games i get little judders/pauses. When i overclock to 205mhz+ then it runs smooth as anything, it's really strange.
    Well i've tried AGP at 67 and 68 no luck, moved SATA over to the 3/4 Ports, relaxed memory timings, upped voltage on both ram and CPU, removed drives, etc no luck at all :(
    Temps are well within limits (Apart from this the system runs rock solid, primes at full load for 9+ hours overnight easy at 2080Mhz with temps reaching 49C, just absolutely no luck in overclocking any further.
    I've decided to use this setup for a HTPC instead and build another with a DFI board and hopefully fare better next time.
    H.Hoang

  • 880GM-E43 voltage settings

    My 880GM-E43 has the following voltage settings:
    CPU VDD-auto
    CPU NB VDD-auto
    CPU-auto
    CPU NB-auto
    DRAM-auto
    If I use -/+ keys, it will either move to the lowest or highest setting. So I'm not sure what the stock voltages are for CPU VDD and CPU NB VDD, as I'm not sure what they're for (the other 3 voltages I know). I'm used to seeing NB and SB voltage options instead.
    Does someone know what the stock voltage settings for CPU VDD and CPU NB VDD are, so I can start from there when overclocking?
    Also, I notice the 880GM-E43 support section on the MSI website doesn't have a BIOS download page (just driver, utility, manual). Any reason for that?

    Quote from: airtrons on 09-September-10, 11:02:04
    I ran the Memtest for 6+ hrs, no errors.
    I did get the new drive today, and did a fresh install of W7 on it. BSOD right after I installed the SB drivers. This time I got PCI.SYS and NDIS.SYS.
    I haven't installed any further drivers; running W7 stock from the dics - no updates either.
    CPU-Z shots:
    Quote
    I ran the Memtest for 6+ hrs, no errors.
    do more testing with Orthos:
    https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
    also switch to 2T and re-test.
    Quote
    I did get the new drive today, and did a fresh install of W7 on it. BSOD right after I installed the SB drivers. This time I got PCI.SYS and NDIS.SYS.
    what if you don't install them? does the bsod persist?
    what's the bsod error code?
    This sound like network card driver..

  • MSI 880gm-e43 ddr3 1600 support

    I recently purchased this motherboard (msi 880gm-e43), and Kingston HyperX 4GB KHX1600C9AD3K2/4G ram kit. However while both are supposed to support DDR3 1600MHz, I only get 1333 with the default configuration.
    Do I need to change overclocking settings to get these working? If so how can I do that?
    (Btw, SPD shows up to 1333 only, while MSI's control panel applications also has another entry for XMP-1600, which I do not exactly know how it differs).

    I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
    But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
    (I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
    There is this page, but it has no documentation, and I have no idea how to set it up:

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Issues with Creative Cloud/Flash Professional? (Performed system restore, Flash was removed...)

    I had done a system restore to restore my computer the way it was 24 hours ago to fix some PC issues (couldn't uninstall some programs that I was going to reinstall to fix performance issues); I have three other Adobe programs of my computer that are still there, but where Flash was my most recent acquisition, it was removed when I performed the system restore. When I tried to re-download the program, CC still thinks Flash is still on my computer; I have uninstalled and reinstalled CC, gone through the program files for traces of Flash (didn't delete or alter anything, but also didn't find anything pertaining to Flash), deleted the Temp folder, attempted to download Flash Professional CC directly from the CC website, but none of these made any changes. Is there any way to manually download Flash, or "reset" CC to get it to notice Flash isn't on my computer anymore?

    It still didn't help - it removed CC from my computer, and I reinstalled it, but I've already tried that. It still says Flash Professional CC is still there (I installed Flash CS6, too, as a substitute in the meantime, but I still need Flash CC). Flash Professional CC isn't on my computer anymore - it was deleted in a system restore, but CC says it's still there, so I can't reinstall it. Is there a direct download I can use?

  • I updated to 6. In Tools, blocked cookies and now can never open Firefox. The allow cookies window is stuck. How do I get rid of the firefox browser and go back to 5. I did have malware on computer that was removed, but still ...not working

    On Saturday, Sept. 3, I updated to Mozilla Firefox 6. I went into the Toolbar, I think to private browsing, but not sure now. I asked that all cookies be blocked. A window came up from my home page that said "Allow, Allow this session only, Deny Cookies." I said Deny and it told me 19 cookies were being blocked. I have never been able to get the window to leave the browser home page. In fact, I can not make any choice in that window. The window kind of shakes. I went for professional help and did have malware that I had not known was there that was removed. Technician worked 3 hours. It was called "PUM.Hijack.Start." The Mozilla browser is still stuck like that. I am on Internet Explorer, but I would like to have Firefox back again. What steps do I take next?

    I am having a similar problem. Running Xp.
    Latest revision of firefox.
    After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
    I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
    I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

  • HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    Restore from the backup you had prior to installing Mavericks.
    However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

  • HT2433 I purchased an external CD drive because the internal one died.  When I try using the new drive I get the following msg "The attempt to burn a disc failed.  The device is not accessable, probably because it was removed"

    I purchased an external CD drive for my MacBook,the internaldrive had died.  When I tried using the new drive I got the following msg "The attempt to burn a disc failed.  The device is not accessable, probably because it was removed"  I contacted OWC and tried to work the issue with them, we gave up and OWC sent me a replacement.  I connected the replacement and am getting the same message.  Any thoughts?

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • HT201240 hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    Eli,
    You can reset a Password (lost/forgotten) set on your Mac using 'Reset Password Utility' available with OS X Utilities tool. With OS X Mountain Lion, OS X Utilities tool can be generally found on a local hidden Recovery HD Partition if your Mac has one.
    To check If your Mac has got a local hidden Recovery HD Partition, start your Mac holding COMMAND + R buttons. If you hold the keys pressed enough and there is a local Recovery HD Partition on your Mac, you will be presented with OS X Utilities window.
    Click the 'Tool' menu item and choose 'Reset password'. Terminal window appears. Type 'resetpassword' into it and press 'Enter'. Reset Password window appears with User Account Names available on your Start-up Volume. Select the User Account Name and rest is simple to follow.
    One of the advantages of this method is that it does not require any Authorization method such as administrative authentication to reset a password.
    NOTE: If your Mac does not have a local hidden Recovery Partition on its system disk, you can create one using Disk Assistant application available from Apple. Search for the Disk Assistant in the support area.

  • Getting error "This file was removed" when trying to use sdk/test/httpd.

    Hi, I wish to test my website using httpd.js. Now when I am trying create a add-on and use sdk/test/httpd by adding following line
    var { nsHttpServer } = require("sdk/test/httpd");
    I am getting following error:
    Message: Error: This file was removed. A copy can be obtained from:
    https://github.com/mozilla/addon-sdk/blob/master/test/lib/httpd.js
    As new to Add on development I am unable to resolve this issue.
    Thanks in advance.

    Apologies for redirecting you to a different site, but this forum primarily handles end-user support. For extension development advice, please try here: [https://forums.mozilla.org/viewforum.php?f=7 Extension Development - Mozilla Add-ons Forum].

Maybe you are looking for