880GMA-E35 does not detect PCI ethernet adapter
Mainboard 880GMA-E35 does not detect PCI ethernet adapter RealTek RTL8139D.
What is the reason?
I did tests with the operating systems Windows XP 32-bit and Windows 7 64-bit
my Computer:
MSI 880GMA-E35
AMD Athlon II X2 240, 2800 MHz
2 X 4GB Kingston module memory 1066 MHz
XFX Radeon HD 4670
In your manual (page 27) it shows 'Auto Disable DRAM/PCI Frequency.. 'Enabled' turns 'off' clocks in the PCI slot.
Just wondering in an attempt to help.
Good Luck
Similar Messages
-
Win XP does not detect onboard ethernet card
Hi,
i have bought a used T41 (2373-tg5) and installed XP Pro SP3.
I have installed all the drivers and everything is working fine. The only problem i have, is the fact, that XP does not detect my onboard 10/100/1000 Ethernet LAN card. It does not show up in the device manager and manually searching for new hardware is to no use.
I have also looked at the BIOS config, the onboard ethernet card is listed as being "enabled". I am sure, there was a device marked with a yellow exclamation mark in the device manager named "ethernet adapter" once. I am not sure, wether this was the WLAN card, i have successfully installed a driver for...it is completely gone now though...
Is this some weird XP thing? I thought, i had read something like this once, but cannot remember.cnhoff, wilkommen im Forum,
when you enter BIOS the MAC address of the internal LAN card should be shown at the bottom, is it showing a number or is it all zeros? All zeros means that there is no LAN installed which would mean in your case a new mainboard or using a pcmcia LAN card.
Grüße
edit: Typo
Message Edited by andyP on 08-13-2008 07:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards
Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly! -
HI everybody,
Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
I've searched around Google and the forums and I've doesn't found any helpfull tip.
The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
Here's some outputs that may be useful:
sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador del disco: 0x8370a3d6
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
/dev/sda3 1435379712 1953525167 259072728 5 Extendida
/dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
/dev/sda6 * 1437339705 1827960116 195310206 83 Linux
/dev/sda7 1827960180 1953525167 62782494 83 Linux
ls -lat /dev/sd*
brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Intel Corporation Device 0036
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: mei
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ata_generic
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
Subsystem: Intel Corporation Device 0037
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: snd_hda_intel
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Thanks for the help!I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
The configuration on the BIOS:
ATA/IDE Mode -> Native
Configure Storage as -> IDE
It doesn't show more valuable information except for the location of any drive on any SATA port.
dmesg output, it can be useful for someone:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
[ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
[ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000df61bf40 00040
[ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
[ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
[ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
[ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
[ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
[ 0.000000] On node 0 totalpages: 2061655
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
[ 0.000000] Normal zone: 18176 pages used for memmap
[ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
[ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
[ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
[ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
[ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
[ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
[ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
[ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
[ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
[ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3324.877 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003590] Mount-cache hash table entries: 256
[ 0.003783] Initializing cgroup subsys cpuacct
[ 0.003786] Initializing cgroup subsys memory
[ 0.003793] Initializing cgroup subsys devices
[ 0.003794] Initializing cgroup subsys freezer
[ 0.003796] Initializing cgroup subsys net_cls
[ 0.003797] Initializing cgroup subsys blkio
[ 0.003818] CPU: Physical Processor ID: 0
[ 0.003819] CPU: Processor Core ID: 0
[ 0.003824] mce: CPU supports 9 MCE banks
[ 0.003833] CPU0: Thermal monitoring enabled (TM1)
[ 0.003840] process: using mwait in idle threads
[ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003958] Freeing SMP alternatives: 16k freed
[ 0.004816] ACPI: Core revision 20120913
[ 0.007720] ftrace: allocating 18793 entries in 74 pages
[ 0.015109] Switched APIC routing to physical flat.
[ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.154178] ... version: 3
[ 0.154179] ... bit width: 48
[ 0.154180] ... generic registers: 4
[ 0.154181] ... value mask: 0000ffffffffffff
[ 0.154182] ... max period: 000000007fffffff
[ 0.154182] ... fixed-purpose events: 3
[ 0.154183] ... event mask: 000000070000000f
[ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.227213] Brought up 4 CPUs
[ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
[ 0.229378] devtmpfs: initialized
[ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
[ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
[ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
[ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
[ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
[ 0.231092] RTC time: 21:05:23, date: 02/03/13
[ 0.231127] NET: Registered protocol family 16
[ 0.231227] ACPI: bus type pci registered
[ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.236542] PCI: Using configuration type 1 for base access
[ 0.236958] bio: create slab <bio-0> at 0
[ 0.237003] ACPI: Added _OSI(Module Device)
[ 0.237005] ACPI: Added _OSI(Processor Device)
[ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237812] ACPI: EC: Look up EC in DSDT
[ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240820] ACPI: Dynamic OEM Table Load:
[ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
[ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241020] ACPI: Dynamic OEM Table Load:
[ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241360] ACPI: Interpreter enabled
[ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.241374] ACPI: Using IOAPIC for interrupt routing
[ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244856] ACPI: No dock devices found.
[ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.245005] PCI host bridge to bus 0000:00
[ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
[ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
[ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
[ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
[ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
[ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
[ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
[ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
[ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
[ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
[ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
[ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
[ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
[ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
[ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
[ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
[ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
[ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
[ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
[ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
[ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
[ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
[ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
[ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
[ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
[ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
[ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
[ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
[ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
[ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
[ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250606] vgaarb: loaded
[ 0.250607] vgaarb: bridge control possible 0000:01:00.0
[ 0.250627] PCI: Using ACPI for IRQ routing
[ 0.252814] PCI: Discovered peer bus 3f
[ 0.252815] PCI: root bus 3f: using default resources
[ 0.252815] PCI: Probing PCI hardware (bus 3f)
[ 0.252831] PCI host bridge to bus 0000:3f
[ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.253005] PCI: pci_cache_line_size set to 64 bytes
[ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
[ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
[ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
[ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.253125] NetLabel: Initializing
[ 0.253126] NetLabel: domain hash size = 128
[ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253137] NetLabel: unlabeled traffic allowed by default
[ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.255164] Switching to clocksource hpet
[ 0.258533] pnp: PnP ACPI init
[ 0.258548] ACPI: bus type pnp registered
[ 0.258610] pnp 00:00: [bus 00-ff]
[ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258618] pnp 00:00: [mem 0x00000000 window]
[ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.259007] pnp 00:03: [irq 4]
[ 0.259008] pnp 00:03: [dma 0 disabled]
[ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.259277] pnp 00:04: [io 0x0378-0x037f]
[ 0.259279] pnp 00:04: [io 0x0778-0x077f]
[ 0.259283] pnp 00:04: [irq 5]
[ 0.259284] pnp 00:04: [dma 3]
[ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.259389] pnp 00:05: [dma 4]
[ 0.259390] pnp 00:05: [io 0x0000-0x000f]
[ 0.259391] pnp 00:05: [io 0x0081-0x0083]
[ 0.259392] pnp 00:05: [io 0x0087]
[ 0.259394] pnp 00:05: [io 0x0089-0x008b]
[ 0.259395] pnp 00:05: [io 0x008f]
[ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
[ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.259413] pnp 00:06: [io 0x0070-0x0071]
[ 0.259418] pnp 00:06: [irq 8]
[ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259437] pnp 00:07: [io 0x0061]
[ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.259459] pnp 00:08: [io 0x0010-0x001f]
[ 0.259460] pnp 00:08: [io 0x0022-0x003f]
[ 0.259462] pnp 00:08: [io 0x0044-0x005f]
[ 0.259463] pnp 00:08: [io 0x0062-0x0063]
[ 0.259464] pnp 00:08: [io 0x0065-0x006f]
[ 0.259465] pnp 00:08: [io 0x0072-0x007f]
[ 0.259466] pnp 00:08: [io 0x0080]
[ 0.259467] pnp 00:08: [io 0x0084-0x0086]
[ 0.259468] pnp 00:08: [io 0x0088]
[ 0.259469] pnp 00:08: [io 0x008c-0x008e]
[ 0.259471] pnp 00:08: [io 0x0090-0x009f]
[ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.259513] pnp 00:09: [irq 13]
[ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
[ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
[ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
[ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.259892] pnp: PnP ACPI: found 12 devices
[ 0.259893] ACPI: ACPI bus type pnp unregistered
[ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
[ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.266492] NET: Registered protocol family 2
[ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.269063] TCP: reno registered
[ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269211] NET: Registered protocol family 1
[ 0.315053] pci 0000:01:00.0: Boot video device
[ 0.315082] PCI: CLS 64 bytes, default 64
[ 0.315125] Unpacking initramfs...
[ 0.353156] Freeing initrd memory: 2804k freed
[ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
[ 0.353859] audit: initializing netlink socket (disabled)
[ 0.353875] type=2000 audit(1359925523.249:1): initialized
[ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.364275] VFS: Disk quotas dquot_6.5.2
[ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364442] msgmni has been set to 15695
[ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.364676] io scheduler noop registered
[ 0.364678] io scheduler deadline registered
[ 0.364713] io scheduler cfq registered (default)
[ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.364910] vesafb: scrolling: redraw
[ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
[ 0.452482] Console: switching to colour frame buffer device 160x50
[ 0.539642] fb0: VESA VGA frame buffer device
[ 0.539651] intel_idle: MWAIT substates: 0x1120
[ 0.539652] intel_idle: v0.4 model 0x25
[ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.539700] GHES: HEST is not enabled!
[ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
[ 0.581313] Linux agpgart interface v0.103
[ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.594726] mousedev: PS/2 mouse device common for all mice
[ 0.594777] rtc_cmos 00:06: RTC can wake from S4
[ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.595018] cpuidle: using governor ladder
[ 0.595079] cpuidle: using governor menu
[ 0.595112] drop_monitor: Initializing network drop monitor service
[ 0.595172] TCP: cubic registered
[ 0.595242] NET: Registered protocol family 10
[ 0.595362] NET: Registered protocol family 17
[ 0.595369] Key type dns_resolver registered
[ 0.595570] PM: Hibernation image not present or could not be loaded.
[ 0.595576] registered taskstats version 1
[ 0.596120] Magic number: 1:939:94
[ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
[ 0.597300] Freeing unused kernel memory: 812k freed
[ 0.597412] Write protecting the kernel read-only data: 8192k
[ 0.599884] Freeing unused kernel memory: 1248k freed
[ 0.601056] Freeing unused kernel memory: 476k freed
[ 0.606451] systemd-udevd[57]: starting version 197
[ 0.624469] SCSI subsystem initialized
[ 0.625159] ACPI: bus type usb registered
[ 0.625179] usbcore: registered new interface driver usbfs
[ 0.625187] usbcore: registered new interface driver hub
[ 0.625823] ACPI: bus type scsi registered
[ 0.625865] usbcore: registered new device driver usb
[ 0.625875] libata version 3.00 loaded.
[ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
[ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.627806] scsi0 : pata_acpi
[ 0.628229] scsi1 : pata_acpi
[ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
[ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
[ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 0.633159] scsi2 : pata_acpi
[ 0.633673] scsi3 : pata_acpi
[ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
[ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
[ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
[ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.647467] hub 1-0:1.0: USB hub found
[ 0.647471] hub 1-0:1.0: 2 ports detected
[ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
[ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.660928] hub 2-0:1.0: USB hub found
[ 0.660932] hub 2-0:1.0: 2 ports detected
[ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.803079] ata1.01: no PIO support
[ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.076944] hub 1-1:1.0: USB hub found
[ 1.077141] hub 1-1:1.0: 6 ports detected
[ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.306076] hub 2-1:1.0: USB hub found
[ 1.306284] hub 2-1:1.0: 8 ports detected
[ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
[ 1.351799] Switching to clocksource tsc
[ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[ 5.935629] ata1.01: no PIO support
[ 5.935631] ata1.01: disabled
[ 5.951315] ata1.00: configured for UDMA/100
[ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 6.120503] ata2.01: no PIO support
[ 11.257635] ata2.01: no PIO support
[ 11.257639] ata2.01: disabled
[ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
[ 11.422293] scsi4 : ata_generic
[ 11.422400] scsi5 : ata_generic
[ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
[ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
[ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.775078] usbcore: registered new interface driver usbhid
[ 11.775081] usbhid: USB HID core driver
[ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
[ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
[ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.159230] systemd[1]: Starting Remote File Systems.
[ 13.159238] systemd[1]: Reached target Remote File Systems.
[ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.159298] systemd[1]: Starting Encrypted Volumes.
[ 13.159306] systemd[1]: Reached target Encrypted Volumes.
[ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.159472] systemd[1]: Starting udev Kernel Socket.
[ 13.159488] systemd[1]: Listening on udev Kernel Socket.
[ 13.159519] systemd[1]: Starting udev Control Socket.
[ 13.159537] systemd[1]: Listening on udev Control Socket.
[ 13.159543] systemd[1]: Starting Swap.
[ 13.159550] systemd[1]: Reached target Swap.
[ 13.159556] systemd[1]: Starting Journal Socket.
[ 13.159589] systemd[1]: Listening on Journal Socket.
[ 13.159600] systemd[1]: Started File System Check on Root Device.
[ 13.159605] systemd[1]: Mounting Temporary Directory...
[ 13.191259] systemd[1]: Mounting Huge Pages File System...
[ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
[ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.231452] systemd[1]: Starting Apply Kernel Variables...
[ 13.240935] systemd[1]: Starting Setup Virtual Console...
[ 13.252572] systemd[1]: Started Load Kernel Modules.
[ 13.252592] systemd[1]: Mounted FUSE Control File System.
[ 13.252605] systemd[1]: Mounting Debug File System...
[ 13.254667] systemd[1]: Mounting Configuration File System...
[ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
[ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.305183] systemd[1]: Starting Journal Service...
[ 13.307733] systemd[1]: Started Journal Service.
[ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 13.750053] systemd-udevd[127]: starting version 197
[ 13.921301] systemd-journald[128]: Received SIGUSR1
[ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.951986] ACPI: Invalid Power Resource to register!
[ 14.953337] parport0: PC-style at 0x378
[ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.027758] ppdev: user-space parallel port driver
[ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
[ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
[ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
[ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
[ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.124825] ACPI: Requesting acpi_cpufreq
[ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 15.127327] ACPI: Power Button [PWRB]
[ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 15.127425] ACPI: Power Button [PWRF]
[ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.140068] hda_intel: Disabling MSI
[ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
[ 15.310990] Disabling lock debugging due to kernel taint
[ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
[ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
[ 15.335992] mei 0000:00:16.0: setting latency timer to 64
[ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
[ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 15.384478] iTCO_vendor_support: vendor-support=0
[ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
[ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
[ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
[ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
[ 34.993208] NVRM: corruption and stability problems, and is not supported.
[ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 98.242223] fuse init (API version 7.20)
Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user. -
Photo Downloader does not detect Thunderbolt connection. Help!
I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the MacIt works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
restart photodownloader and try again.
The other option is to use a USB 3.0 or Firewire (both also pretty fast).
The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time -
Imac does not detect external vga display
Please help with connecting external vga display to an imac 21.5'', late 2012, OS X 10.8.5 via Mini DisplayPort to VGA adapter.
I have connected an external monitor (Fujitsu Siemens) to the thunderbolt port of the imac using a Mini DisplayPort to VGA adapter. The imac does not detect the external monitor. I have followed all instructions and suggestions I could find at Apple Support Communities without success.
The monitor is in perfectly good working order as it has no problem connecting and performing flawlessly with a dell windows laptop. The imac, connected via the Mini DisplayPort to VGA adapter to the D-Sub connector of a Samsung smart TV, also worked perfectly.
To add insult to injury, occasionally, when restarting the iMac with the external vga display connected and powered on, the iMac screen starts intermittently turning blue for a brief second or so and resuming back to normal. The frequency of 'blueing' is once in 2-3 seconds. This particular rather disturbing problem, luckily ceases when the external display is switched off.
Any advice and help with resolving the above connection problems will be gratefully appreciated.
Thank you
ghogohI am having the same issue. Hope Apple can fix this soon!!!
-
Wi-Fi does not detect on Satellite L40-139
Hello!
I have a problem with Wi-Fi connection on Toshiba L40-139 under Windows XP Professional
I have all drivers for this model from this site.
Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter was installed.
But during the installation there was an error "Couldn't install driver".
Wi-fi card does not detect by device manager
When I try connect to Wi-Fi network I have a message that there isn't any Wi-Fi devices on my notebook.
Help, please!Hi
As Im not mistaken the L40-139 PSL40E supports the Atheros 802.11g WLan card.
And therefore you should use and install the Atheros Wlan card driver!!!
Additionally you should perform a BIOS update.
According to some postings here in the forum, the BIOS update helps to solve some WLan issues.
Check it out & good luck
Bye -
AirPort does not detect networks, unless another network connection is made
I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists.
AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or to another Mac via Firewire to use network sharing, it can update and load web pages as normal. A strange quirk I've noticed though, whenever connecting with ethernet or firewire, AirPort will suddenly detect the network! It still can't quite connect to WiFi properly though. While still connected through firewire or ethernet, it will have no connectivity through a self-assigned IP. If it is disconnected from ethernet and firewire again, the wireless network will still show up in a re-scan for networks but it will fail to connect.
I've opened the computer up to ensure that the airport extreme card is seated properly as well, and that the antenna cable is secured properly.
Any ideas as to what the issue is? Should I look into replacing the AirPort Extreme card?Got no answer on my original post, so I went ahead with ordering a replacement AirPort card on eBay (item #130487488014). Once installed, the iMac was able to detect and connect to networks normally... but was still unable to load any web pages. I tried on secured and unsecured networks as I did previously, and plugging directly into the router and into my Macbook Pro via firewire, with the same results as before. Safari loads pages when connected with an ethernet or firewire cable, but will not load pages on WiFi alone. I can attempt to access a router setup page via WiFi, and am prompted for a username/password, but the page itself never manages to load.
Any clues as to what may be going on here?! -
HH5 Does not detect my Technomate Box
I've recently switched from a HH3 to a HH5, and now that I have set everything up, the HH5 does not detect a connection to my Technomate satellite box via Ethernet, this was not the problem with my HH3.
Is there any way I can force a connection? Why has the HH5 blocked and detected no connection only to my Technomate Box, when it allows connection to all my other devices such as my PS4, YouView, and 2 Computers?
Help?!
Thanks.What's the ip address are you getting on the main computer ?
-
Mavericks does not detect my HD tv via thunderbolt
I have a 15" Macbook Pro (mid 2012) and when I plug in my thunderbolt to hdmi adapter it does not detect it at all. Also I am running Mavericks on this Macbook. Please Help
In system preferences/displays, click detect displays, also see the following:
http://support.apple.com/kb/HT5219
http://support.apple.com/kb/PH13801 -
[SOLVED] Kernel over 3.14.4-1 does not detect my hardware proper
Hello everyone,
i've a little problem with any kernel higher then 3.14.4-1.. After a long time, i bootet up my PC and updatet Arch. There where nearly 350 package updates. Everything went fine, except for the kernel update.
Updating to kernel 3.16.3-1 broke nearly everything on my system. Arch boots but does not detect any hardware like the graphics card or the network adapter. I've read journalctl but can't find any usefull hints or a point do begin my error searching.
Maybe someone of you can give me a useful hint…
Here is a link to the logfile: http://p.tkolb.de/SpGKcAQjxk1A.txt
Thank you very much in advance for your help,
Sqozz
Last edited by Sqozz (2014-09-29 17:45:46)I've reverted to the last working kernel with "pacman -U".
Could now find the Problem: /boot was not mountet during the kernel build.. Such a stupid mistake.
Thank you anyway for your fast replies! -
MAX not detecting PCI 6259 connected to BNC 2120
I have the DAQmx driver 9.0.2
I have the card (PCI 6259) in a windows XP machine
The breakout box is a BNC 2120
MAX does not detect any devices and interfaces.
Thanks for any help,
FmilesDoes your device show up in Device Manager under data acquisition devices? If not than it is not being recognized by the computer and you should try moving PCI slots on the card. If it does not show up under data acquisition devices, right click on it and select uninstall, restart the computer and it should install on its own again.
Was the card installed during the DAQmx install, try reseating the card.
Make sure the NI Device Loader Service is started in Control panel»Administration»Services. It should be set to started and automatic.
Does DAQmx 9.0.2 appear under Software in the Configuration Pane of Measurement and Automation Explorer, if not, it may not have installed correctly.
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring -
Spotify Connect - Does not detect Denon Ceol N9
Hi, I have installed the spotify app (using premium) on my HTC one m8 (Android 5). While I am able to detect and play music to my wondows 7 laptop, it does not list my Denon Ceol N9 network player, and I am unable to stream music to my stereo using spotify connect. I have followed the (very short) instructions listed here: http://manuals.denon.com/RCDN9/EU/EN/ZHOBSYxvrwcwjl.php on how to use Spotify Connect on my Denon, but unsuccessfully so far. The units are all connected to the same wifi, but the Denon Ceol N9 is not lised in the spotify app. Any tips on what I am doing wrong? Some settings I need to enable to make this work? Help would be much appreciated :) - Petter
My Spotify connect (new versions) does not detect my Denon Ceol Piccolo, My Coel Piccolo is connected to internet wifi or even ethernet cable but non of them results of my Spotify (in other device as iphone or desktop computer) detects My Denon Ceol Piccolo. I also tested to unplug but nothing changes, understand there is problem with connect?, I remember a couple of months ago I could connect as it was detected by iphone (never by my desktop computer
-
Satellite Pro C660-1NQ does not detect WLan network
Hi Guys,
We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
I have checked device manager and the wireless card does not show in here.
I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
Any ideas as to what i can try next?
Cheers,
AshHi
It seems that the notebook would support the Atheros 802.11agn Wlan card.
Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
If its not listed then I recommend installing the WLAN driver which can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads
Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
Hope this helps to detect the Wlan chip!!! -
My apple tv does not detect wireless router sitting next to it
I have my Apple TV sitting just few feet away from my router. It does not detect my router. So I added the IP addresses manually. Under Apple TV Network settings, it still says Ethernet. What can I do to get AppleTV to detect my Wireless rouer?
Did you unplug the ethernet from AppleTv not just the router? I've found even a non-terminated cable plugged in disables wifi.
Daft as it sounds, sometimes if the router is too close it can cause communication issues over wifi.
If ethernet was working, why change to wifi?
Can you confirm ethernet does still work and that AppleTV is not just 'stuck' in ethernet mode.
Unplugging was a good test as that often corrects issues.
It is possible your AppleTV software is somehow corrupted - restore via itunes using microUSB to eliminate that possibility, or that AppleTV hardware has failed and is 'stuck' thinking ethernet is connected.
AC
Maybe you are looking for
-
TS1363 ipad and iphone will not show up in windows 7 ...It was ok last week
I have tried the advice on the Apple site but when i try to reinstal the drivers for itunes apple device I get an error code 10 ?
-
ABAP Report -- to Transaction code
Hello, don't know if this is the correct subforum (sorry in advance). I have created a ABAP Report in SE38 having a SELECTION-SCREEN. Now I would like to have a Transaction code to refer to the report. So that I can call the Transaction and then get
-
Business Process and sub Process IN ERM and CUP
Hi Friends, We are in intial stage of GRC implimentation. Now I am uploading the roles into ERM and CUP. I have defined business processes and sub processes for the roles and upload the roles successfully in ERM. But when I am doing the same excercis
-
Can you explain the members of AIRealMatrix?
Hello, AIRealMatrix has the follwing members in CS4 ASReal a ASReal b ASReal c ASReal d ASReal tx ASReal ty please explain what is each point represents?
-
Wired Apple Keyboard not recognized in Win 7 64x bootcamp partition
I installed a bootcamp partition on an iMac late 2012 i5 running 10.8.3 following the Bootcamp instructions. Windows 7 64x installed fine. My wireless Apple keyboard and magic mouse work fine. However, when I plug in my previous Apple wired keyboa