881 IOS support for IPSEC and OSPF

Is there an IOS image for the 881 that contains IPSEC feature set AND support for OSPF? I recently purchased an 881 and it came default with this system image "c880data-universalk9-mz.152-4.M4.bin", however this image does not support OSPF. I need an IOS image that supports both OSPF and IPSEC feature sets. Please advise.

hi,
according to cisco's FN, you might need a c880data-universalk9-mz.153-2.T1.bin.

Similar Messages

  • The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

    Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

    Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

  • Flex 4.5:Convert mxml project into IOS project for ipad and iphone

    Hi All,
    I created a mxml project and now i want  to convert the same project in Flex builder 4.5 IOS project for iphone and ipad but its seems the mobile project doesnot support mxml.
    I am using module and moduleloader and in Flex 4.5, they said the use of this is discourage. I didi not get any alternative of them.
    Please help me to convert this application in IOS.
    Thanks,
    Saurabh Shrotriya

    Modules are not supported on iOS due to Apple's App Store terms of service.

  • When i try to open photoshop this shows up Please uninstall and reinstall the product.  If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.  Error: 16

    i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
    Please uninstall and reinstall the product.
    If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
    Error: 16
    and when i click the uninstall app on the file it tells me this
    The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
    and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
    please help thank you

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS6 products
    Mylenium

  • [svn:fx-trunk] 10876: Add support for drag-and-drop from Spark List to Spark List.

    Revision: 10876
    Author:   [email protected]
    Date:     2009-10-05 15:20:07 -0700 (Mon, 05 Oct 2009)
    Log Message:
    Add support for drag-and-drop from Spark List to Spark List.
    - List drop related handlers
    - LayoutBase APIs
    - VerticalLayout DND support
    Notes:
    - ListSkin is not final.
    - Drag-scrolling not yet implemented.
    QE notes: Only VerticalLayout works, HorizontalLayout still not implemented.
    Doc notes: None
    Bugs: None
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/VerticalLayout.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/LayoutBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ListSkin.mxml
        flex/sdk/trunk/frameworks/spark-manifest.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/DropLocation.as

    Whoops, disregard my question - I just read the spec that indicates drag and drop is scheduled for later work.
    David

  • ZAM support for Debian and CentOS

    I'm planning to install Zenworks Asset Management and I would like to know if it would release a support for Debian and CentOS. We have a heterogenous network environment and there are servers that are running Debian and CentOS. Is it possible for ZAM to release a support for these operating systems?

    Vindveif,
    The version of Asset Management (7.5) that this forum covers, runs on
    top of windows only. ZLM (7.3) only supports SLES and RedHat.
    Shaun Pond

  • Feature Request: Support for .idea and .psdx extensions

    I've noticed that Adobe Bridge does not have any support for .idea and .psdx files.  The .idea files will show a idea file icon but the .psdx will be a blank, unknown file icon.  Both do not show any preview in Bridge.  I do not know why this is as previews for these files can be seen when they are uploaded to creative cloud or the new creative cloud mobile app.

    Hi,
    I've logged an enhancement request on this.
    Thanks,
    David

  • Support for AWR and/or SR2???

    Will Aperture soon add support for AWR and/or SR2 files (generated by the Sony DSLR-A100)? What about Photoshop, for that matter?

    No, we have consolidated on the Apache XML/XSL stuff. You are free to use
    whatever other parser you would like however. The Sun XML pkg should work
    fine.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Boris Tabenkin" <[email protected]> wrote in message
    news:[email protected]..
    Are you still including the sun XML package, and if so which version?
    "Toby Allsopp" <[email protected]> wrote in message
    news:[email protected]..
    Hi, Craig.
    Craig Macha wrote:
    Our company typically does NOT use Open Source products. We can't
    risk
    not having support.
    I think you're a little confused about what "Open Source" means. Itdoesn't mean "unsupported." If you want support then you need to pay forit,
    just like any software. One of the advantages of open source software is
    that you aren't tied to a single vendor for your support - anyone with the
    appropriate skills can take the source code and
    provide support, as BEA have chosen to do in this case.
    Regards,
    Toby Allsopp.

  • Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?

    Hi.
    I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
    If you can provide for all the versions that would be great.
    -Thanks
    - Ajay Chanana

    Hi,
    You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
    scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
    For more detailed information, please refer to the link below:
    FAQ Week for NLB: Tuesday
    Best regards,
    Susie

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • IOS support for Flash Builder 4.5.1

    I am getting the following message when I try to export a releae build to iOS using Flash Builder 4.5.1:
         This platform is not currently supported for Flex Mobile projects
    I have tried running the update again and gives me the update was successful message, but I still don't have iOS support.
    I did update using the Eclipse updater and was unable to open Flash Builder, but since resolved that issue. I wonder if I need to reinstall Flash Builder and reapply the update or if there is an easier fix.

    I just created a project with Adobe Launchpad (http://labs.adobe.com/technologies/airlaunchpad/), and it looked like I setup all the options for iOS, but when I go to run configurations and try and deploy to an iOS device I'm getting the same problem: "This platform is not currently supported for Flex Mobile projects"
    Anyone know why?

  • Cisco IOS supporting both voice and vpn

    Hi Friends
    i have one 2821 router.Can any one suggesting which ios will support both voice and vpn?

    Questions like this are better/faster answered by checking feature navigator.
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    My suggestion is to run an MD release.
    Also a big dated document:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_tech_note09186a00800fb9d9.shtml
    For old software and hardware you can also check out Figure 1 here:
    http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_506007.html
    M.

  • Out-Of-Band Management over IPSec and OSPF Area Design

    Hello,
    i'm planning to implement Out of band management over OSPF over IPSec Tunnel and i have a question about the OSPF area design (please see attached figure).
    As network administrator our NOC is sitting in OFFICE (OSPF Area 1). Internet access is guarenteed over our DCs (Multihomed BGP peering).
    Additionally we have a second internet access at OFFICE where i want to use for IPSec Tunnel and building a OSPF neighboring to our Out-of-Band Firewall, which they too have theire own internet access.
    I'm planning to declare this IPSec Tunnel as OSPF AREA 3 and AREA 4 respectively for DC1 and DC2. There are no subnet overlapping.
    My Question is if I should connect both areas 3 and 4 at OFFICE to the backbone area over a virtual-link or not? Would be an disadvantage if i wont use the virtual-link?
    Thx for any reply

    1.The AUX port on Cisco routers is either RJ-45 or DB-25. If the AUX port is RJ-45, use a flat-satin rolled RJ-45--RJ-45 cable (part number CAB-500RJ= ), which is usually provided with every Cisco router for console connections. You also need an RJ-45 to DB-25 adapter marked "MODEM" (part number CAB-25AS-MMOD) to connect the rolled cable to the DB-25 port on the modem.
    2. if your router has a DB-25 AUX port, use a straight-through DB-25Female - DB25Male RS-232 cable to connect the modem to the router.
    Use this document.
    http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml

  • How do i express my support for firefox and my disaproval for your CEO? He needs to step off 4 FF move forward, BYE,if push/shove take friends wt me

    I'm gay. FF, CEO is a bigot ,who financially, supports GOP efforts, to deny freedom and civil rights to Gay Comunity. I always thought FF was about a responsible company with an eye on the future and inclusion? Disappointed, and sadly, about to move on. I cant support injustice. Been a FF user since about 06-07', turned tons of friends on to Mozilla, love it. Sad day, I love products, but time for open minded CEO. Peace

    A update:
    https://blog.mozilla.org/blog/2014/04/03/brendan-eich-steps-down-as-mozilla-ceo/
    He was not forced to step down by board as it was his own choice to do so for Mozilla and communality.

  • Why is there no support for up and down arrow keys when scrolling through presets in adobe raw

    seems like it would be common sense to support such a basic function, especially when having to scroll through about 100+ different presets(VSCO Film). We need support for arrow keys so that it may be easier to compare colors much more quickly. Also the support for comparing 2 of the same images would be even more awesome, RAW image on left, and Presets on the right, or compare different presets to one another.

    You can submit it as a feature rquest, then forget about and go back to your life.

Maybe you are looking for

  • Picks/Rejects dissappears after remove and reimport

    I have a mayor issue. My catalog has grown to inhuman size. =( So I tried to remove (not delete) some of the pictures/folders. Where I have a lot of Picks/Rejects, star ratings bla bla bla. So far so good. The problem comes, when i Reimport the files

  • How to learn and work CS6 from the middle of nowhere ?

    Hello all, I live along the cordillera de los Andes, and the first good internet connexion is 30 km away from my "casa de campo". Sooooooo, how do I do ? First question (thanks) 1. I go to "town" with my (light) MacBook Pro and I load programs and up

  • Problem in transforming xml data to HTML

    Hai all, I am new to J developer, I have generated XML data to transform to HTML. Below is my xsql file with the name 'simpleqry.xsql' <?xml version='1.0' ?> <page xmlns:xsql="urn:oracle-xsql" connection="java:comp/env/jdbc/testDS"> <xsql:query max-r

  • Multiple monitor desktop

    hey im looking to get a reasonably priced (<$1k) desktop but need it to support multiple (at least 2 preferably more) monitors. It is kind of hard to figure out when looking online which will do this and how many. any recommendations

  • Is it possible to set up repeating calendar events by day rather than date?

    I attend several classic motorcycle shows and car shows locally. Some occur every first Wednesday of the month, some occur on the last Saturday of every month, and some are on the third Thursday of every month. Entering them every month is slow and I