881W using Cisco Unified Mode

I am looking into configuring an 881W to leverage WLC devices on our network. They follow the same paradigm as the LWAP's so I understand the DHCP option 43 and all of the tunneling and discovery process. However, I have a question about how the embedded AP grabs it's IP address. According to the documentation the DHCP pool is setup and it is tied to a VLAN 1 interface. Does this need to be? I have three different pools of DHCP defined on the router for voice, wireless, and wired and I want to make sure the embedded AP always grabs from the Wireless pool which is not currently associated with VLAN 1. The information I am looking at is from the "Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide". Thanks in advance for your help.

CUVA is not supported with SIP phones. See the following link for confirmation.
http://www.cisco.com/en/US/docs/video/cuva/2_0/english/adminstration/guide/vover.html
Hope this helps. If so, please rate the post.
Brandon

Similar Messages

  • Is there any option on Cisco Unified CM Administration 9.1.1 to show caller ID number when using MOBILITY option?

    Dear All,
    I am using Cisco Unified CM Administration 9.1.1 and MOBILITY works fine.
    However  when somebody calls from external phone number into internal user number and MOBILITY option is ON and obviously, forwards the call for the user's cell.....in this case user can see only main company number, but not a caller number.
    So, is there any option to change it?  
    Thank you

    Go to the GW and run some debugs to find out exactly what you're sending, chances are, your telco is overwriting the original called number as it's nor part of your DID range.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Cisco Unified Call Studio 8.5

    I need to write an app using
    Cisco Unified Call Studiom this app will run every 30 secs do some DB query and make outbound calls, I see that the START of Call element is the only thing I have to Start a call, my application will not get any call, any ideas? thanks.
    [email protected]
    thanks.

    Studio 8.0 installs on XP and Vista. Studio 8.5 installs on Windows 7, Vista, XP.
    There are no real performance issues that Cisco could object to if the above operating systems were "guest O/S" on a VMware ESX server - it's not the same situation as the CVP servers, where they do have firm guidelines.
    Studio works in this environment and I have customers who run Studio on a "guest O/S" - Cisco did not say specifically that this would be an issue.
    But I don't have any documents that confirm that this is OK.
    Regards,
    Geoff

  • Problems with iOS 7 Mail and Cisco Unified Messaging attachments?

    Does anyone out there use Cisco Unified Messaging in their workplace? I am seeing an issue with iOS 7 (7.0.0-7.0.2) where the following scenario occurs:
    You check an email in the Mail app that is from the Cisco Unified Messaging system when you get a voicemail. The voicemail is left by Person A who attaches a subsequent voicemail from Person B and they leave an intro saying "Attached is a voicemail blah blah blah"  The email from Cisco comes across as having a .wav attachment and then an email attachment with a .wav file inside (supposed to be the original voicemail from Person B). If you play both .wav attachments, it just plays the same audio and not separate voicemails (one being the intro from Person A and one being the original Person B voicemail). It seems to hold on to whichever .wav attachment you played first (e.g. if you play the Person B voicemail .wav file and then go to the .wav file that should be Person A's intro, it just plays Person B's voicemail).
    We did not experience this with iOS 6 and have confirmed that things work just fine on phones that have not been upgraded to iOS 7. Email account on iOS devices is a Microsoft Exchange account.
    I am sorry if this is already a known issue, but I've had trouble searching for results. Any help would be tremendous in hunting down this strange phenomenon.
    Thank you,
    -Ted

    Does anybody have even any thoughts on this and whether it might be a known issue of any kind? Anyone seeing this with other .wav attachments outside of Cisco UM  ?

  • CISCO unified CCX reason codes

    Hi, I have generated an AGENT STATE DETAIL REPORT and two of the not ready reason codes are 36 and 38. Can anybody point to where in the CISCO literature I can find the explanation for those reason codes. Or explain them to me.
    Also as a second question, when using CISCO Unified CCX to generate reports is there any way of showing what the call termination reason was.
    ie Call has been handled but was it a) ended by the caller b) ended by the phone agent c) ended by a CISCO error.
    This would be quite usefull to know at times.
    many thanks in advance for any help, advice or pointers.

    Hi Eric,
    The reason codes are defined through the desktop administrator and the range are 0 - 999.Refer the below link page number 48 for more info.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cda85ccxug-cm.pdf
    Page :191
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
    For the second query refer the database schema guide for more info.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85dbschema.pdf
    Regards,
    Gnan.
    Pls rate if this helps.

  • Cannot reset user vmail password with Cisco Unified CM Administration

    We are using Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to me saying that they could no longer access voice mail, getting invalid pin. Ichanged the pin with the Cisco Unified CM Administration which accepts the new pin no problem but when we try it from the phone it doesn't work. Any ideas... Thanks Don

    Hey Don,
    Well, that's no good
    There should be no correlation between resetting the user PIN
    and the forwarding to voicemail.
    Let's say that the user is @ DN/extension 5999.
    In CUCM admin go to;
    Device>Phone>Find List by Directory number> find 5999
    on the DN config page look at the Call Forward sections (all, no answer, busy)
    and make sure they are set to forward to VM (usually by using the VM checkbox)
    If you need to, have a look at a working phone/DN for comparison
    Cheers!
    Rob
    "Spend your life waiting,
    for a moment that just don't come,
    Well, don't waste your time waiting" 
    -Springsteen

  • Cisco Unified CM Administration ver 7.1 date and time issue

    We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes... Thanks Don

    The latest release of CUCM 7.1.5 is 7.1.5.35901-1, so you can always try that. Link to download:
    http://software.cisco.com/download/release.html?mdfid=282421166&flowid=45895&softwareid=282074295&release=7.1(5b)SU6a&relind=AVAILABLE&rellifecycle=&reltype=latest
    The latest version of CUCM software is 9.1.2 with 10.0 coming out any day, thought those would be considered major upgrades and would require some planning, on i.e. ensure hardware compatibility, all software compatibilities, ELM licensing migration, etc.
    HTH,
    Chris

  • Camera for use with Cisco Unified Video advantage?

    Cisco is EOLing the Cisco Unified video advantage product that we thought would be a good fit for us to integrate video with some of our IP Phones.  I can still order the Video Advantage software until later in the year from Cisco but they have discontinued the Cisco VT Camera III that was previously used with this product. 
    They list the Logitech C920-C web cam as a replacement for this product, but it seems to be difficult to locate.  The realease notes say you can use a 3rd party camera but Cisco does not officially support it. 
    Has anyone used any third party cameras with Cisco Unified Video advantage and if so which would you recomend.  I was hoping to use the Logitech HD Pro Webcam C920 (the generic non Cisco version) but wasn't sure if it would work ok? 
    What do you think?  This will be using Unified Video Advantage 2.3. 
    Jim                   

    Hi,
    We have been using Video advantage v 2.1.2 with 7940 series phone since long, it works fine with almost all 3rd party camera`s and even with the inbuilt laptop cameras.
    v 2.3 is an enhanced version as compared the one which we are using. So i would suggest you to go ahead and try it with any good qaulity webcameras available in market.
    Further to add there are certain PC requirements which needs to be met, the same can be found in the below link.
    http://www.cisco.com/en/US/docs/video/cuva/2_3/release/notes/relnote_cuva23.html#wp1118706

  • You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

    Hi
    I recently upgrade tp 7.0.3  from 7.0.2.
    While upgrade i found that i am not able to login to the web server with the admin id "admin" default created in the application server.
    The same id i can login to application server  , but not in wewb server.
    I am getting the mentioned error "You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles".
    However if i create a new user in application server and tried logging with the  same in the web server it is working fine..
    is it a known behaviour wirh the upgrade or i m facing some issue.
    Hope i can find a solution here.
    Regards
    RC

    RC,
    This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles.  This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation.  The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
    Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
    You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory.  You just cannot use the admin account.  This is reserved for login to the MP Application Server Administration page only.  I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above.  Here is the note from MP 8.0 documentation-
    Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
    Please let me know if you have any further questions.
    Thank You,
    Gerry

  • Nortel CS1000E Release 7.5 using SIP to Cisco Unified Communications Manager 6.1.5

    Actually exist diferents publications with other releases, but not with this options in common, somebody can help me???? Thank you!!!

    I have a similar problem, only the tab with the Cisco Unified Communications Manager AXL servers option  is disabled or appear disabled in CUC. any idea what might be going on, I checked  that the service relates to AXL is on and running in CUCM and CUC.

  • Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

    Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
    Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
    Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
    Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
    SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
    Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
    Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
    Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California.  He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization.  Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response. 
    Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

    Hello Sebastian,
    The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
    Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
    Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating  C-Series Rack-Mount Server with UCSM.
    This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
    You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
    Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
    The following are the connectivity modes:
    •  Dual-wire Management (Shared LOM):
    Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
    This mode is recommended when you have C-Server which does not  have or cannot support VIC 1225 card (such C-200 server)
    •  SingleConnect (Sideband):
    Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
    This feature is referred to as SingleConnect.
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
    This most recommended Integration model when using FEX and VIC 1225 card
    •  Direct Connect Mode:
    Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
    This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
    Please let us know if you need more information. Thank you!
    Thanks,
    Vishal

  • IPhone - Cisco Unified Mobile Communicator

    I used to have Cisco Mobile 8.0  with ( Cisco Dual mode for iphone devices ) that start with TCT<username>
    Within this App, I had to configure this in the settings of the app on the Iphone
    Device ID : TCT....
    TFTP : cucm
    The Mobile 8.0 was working fine
    I cant find Mobile 8.0 on the apps store anymore,  I can find Cisco Unified Mobile Communicator,  it seems to be the new version
    now it ask
    user
    password
    phone number
    server
    port
    And I cant make it work.. anyone have some experience to share with this new application ?

    Richard is correct. The CIMC app was used with the Cisco Unified Mobiliy Advantage server which has long been EoL. The app remains in the store only for customers who have this solution in production.
    Cisco Mobile 8.1 was renamed to Cisco Jabber and more recently Cisco Jabber Voice to distinguish it from the unified VoIP+IM client that is now called Cisco Jabber.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Cisco Unified Video Advantage - CDP Driver Not Installed- Windows 7 64-bit

    OK, so I'm sure the problem is Windows 7 64-bit, but after installing version 2.1.2 of Video Advantage, although everything goes in with no problem... it's not connecting to either my CUPC soft-phone or the attached video enabled Cisco IP Phone .  When I click on About, there is no version listed next to the CDP Driver Version.   When I go into Device Manager, I don't even see the Cisco CDP Driver listed.  There were no error messages during the install, but it would appear that the CDP Driver didn't get installed during setup.  This, of course, would explain why the phones are not being detected (since it uses CDP for discovery).
    Has anyone come across this and come up with a workaround ??

    If you download the PDF for Cisco Unified Communications Support for Microsoft Windows 7 that was published on 10-22-2009 you will see that currently there are no plans to support Video Advantage on Windows 7. I haven’t tried installing it on my 64 bit Windows 7 system yet but have you tried installing it using the program compatibility wizard? If that doesn’t work you can install the XP Mode which is a virtual machine of Windows XP that would allow you to install it there. The XP Mode virtual machine has worked for me on every app so far that doesn’t work with Windows 7.

  • 5760 WLC compatability with 887 routers in unified mode

    Hi,
    I was wondering if cisco 5760 WLC is compatible with APs in 887 router when switched to unified mode? It seems like WLC is rejecting it says unsupported AP
    Cheers

    Not supported.
    Here is the supported AP list as of IOS-XE 3.6.0 (1700 & 1570 series support added in 3.7.0E)
    http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/Supported_Features.html#pgfId-1071753
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Redundancy for Cisco Unified Communications Manager Business Edition 8.0.

    Hi,
    Is there redundancy for Cisco Unified Communications Manager Business Edition 8.0.
    Can I deploy more than one server at a site for redundancy?
    Thanks
    Mudassir

    No. UCM-BE is a single-server solution. You can use CME in SRST mode for survivability if the server is offline.

Maybe you are looking for