881W wireless http config page shows only "Enter" button

Hi,
I have new 881W router, the wired portion works like a charm, the wireless part not quite..
When using Cisco Config Pro to access wireless part of it. it suppose to open a browser so i can continue configuring wireless part. Unfortunately, when i click on Launch Wireless (or simillar), the browser opened the page and i have only button "Enter". When i click on it i got error on the page in bottom right corner of the IE, or nothing happened if i use Firefox.
Coudl someone shad some lights on this issue? I have been googling it and found some article about different IOS code for AP. That article did not apply to my case even dough symptoms were the same, downgrading to mentioned IOS version did not help.
Any suggestions appreciated.
Regards,

Hi,
This is a known bug on the embedded AP on the 881W -- CSCtc94776. It occurs on software version 12.4(21a)JA1 -- what version of software is running on your AP?
The recommended resolution is to upgrade the AP module (not the router) to version 12.4(25d)JA1.
The image name is :
ap801-k9w7-tar.124-25d.JA1.tar
And you can initiate the upgrade from the AP CLI:
archive download-sw /force /over tftp:///
-Patrick Croak
Wireless TAC

Similar Messages

I select a page for printing and the print page shows only the frame data and this is all that it prints.

when I click on print the page to print shows only the frame and that is all that is printed. Why isn't the page data shown on the print page and also printed?

This is how you do it:
http://i1224.photobucket.com/albums/ee374/Diavonex/c7db8382.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/5e4aadae.jpg

Composer shows only Help button

I have two 11.1.1.4 environments. When I go to bpm\composer, I am able to login with weblogic but neither one shows me any buttons besides the Help button. I have tried changing the ServerURL in the beans, also made sure my user was in the SOAComposer role.
Where do I go next?

Hi,
This is a known bug on the embedded AP on the 881W -- CSCtc94776. It occurs on software version 12.4(21a)JA1 -- what version of software is running on your AP?
The recommended resolution is to upgrade the AP module (not the router) to version 12.4(25d)JA1.
The image name is :
ap801-k9w7-tar.124-25d.JA1.tar
And you can initiate the upgrade from the AP CLI:
archive download-sw /force /over tftp:///
-Patrick Croak
Wireless TAC

Page shows only lables when error accures

Hi All.
Jdev: 11.1.1.3.0
I have built jsff page based on datacontrol (VO is based on EO), page is having input fields where user can enter data.
I am taking data and validating in Bean and AmImpl method, if validation in success i will insert data to DB.
this is working fine now,
But for negative scenario ,,if there is any failures in validation ,,i am showing error message to user,
this time error popup will come,,and All page Input fields get disappeared and only related label will get shown,
happening in only in error scenario's
pls help me,,,
thanks
Santosh

Hi Timo..
I am showing error through popup.
i am using like below for erros
if (returnMap.get("duptempName").equals(true)) {
JSFUtils.addErrorMessage(RoutingTemplateConstants.ERR_RTE_TEMPALTE_NAME_MUST_BE_UNIQUE);
I am able to see error in popup in screen..
please suggest me to resolve this....
thanx
Edited by: Santosh M E on Feb 29, 2012 11:56 PM
Edited by: Santosh M E on Mar 1, 2012 12:11 AM

Pdf docs created in pages show only photos, graphics, NO text, Help

I have tried exporting to pdf, best quality & also "Print" to pdf with same results. The resulting thumbnail on my desktop and the one in "get info". look fine but when the pdf doc is opened only the graphic elements including photos show up. NO words show up at all (on Mac or PC). I need to be able to create pdf so I can print on pc network. Any suggestions. It would appear that I am following the instructions correctly as a pdf is actually created but with the above results.

Tried your suggestion to no avail. However found some new info that might help find the problem.
1. When I open in preview rather than Adobe the document looks correct.
2. When I click and drag across the missing text I can produce grayed blocks where the text should be..
3. If I then "copy" and "past" into a blank word document the text appears in the word document.
4. I was able to open the document with the problem with e-copy desk top a kind of reader/converter.
5. My OS is up to date.
5. Adobe reader is up to date as well (8.1 think).
Thanks, for your help though. I really appreciate your trying.
Don

Test page shows only black bars

I followed Bob's instructions and actually got my Designjet to wake up! I have its parallel cable connected to a USB adapter and programmed to the USB001 virtual port in my newer windows 7-64 bit computer. I use the driver for the HP Designjet 600 (E/a0) which has always worked fine on my old 32-bit windows xp pro computer. The plotter responds to the 'print test page' command but shows solid black bars instead of text. Suggestions anyone? (I paid $5500 for this beautiful machine and it runs as good as new. I refuse to throw it in the landfill. My original deskjet 882c still runs perfectly, despite all the windows upgrades over the past 30 years. If they're not willing to maintain their drivers, HP should disclose that their plotters have limited lifespans no matter how much they cost.)

I'm not computer expert but I solved my own problem getting my Designjet c1633b to print new autocad drawings through my 64bit computer. All I had to do what plot my drawings to pdf files. I was then able to print out the pdf's on my 24 year old HP Designjet like it was brand new. I had a small problem at first: my drawings were shrunk and the margins were oversized so the scale of the printed image was off. I solved that by setting the pdf print command to "full size". Sorry HP, but as long as this beautiful machine keeps running, I'll keep using it.

Procedure in dynamic page shows only sometimes data

Is anybody recognizing this problem:
A stored procedure is called in a dynamic page. The procedure builds up a html form. When calling the dynamic page, sometimes the form appears, sometimes it does not appear. In the last case, even a errormessage is not shown. The portlet area in the page is just empty.
Anybody an idea?
Johan

Problem solved. I changed the timeout period of the provider ('Edit a Provider Registration') and I added a timeout message.

Problem in custom jsp page when pressing enter button

Hi to all,
<pre>
I am created a cutom jsp page. When i am clicking on a button it working fine, but if i am pressing
Enter key it redirecting to home page and showing an exception in cosole.
<b>Exception is </b>
18:00:50,718 ERROR [WEBAPP] Class/Method: tcActionBase/execute encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.springframework.web.struts.DelegatingActionProxy.execute(DelegatingActionProxy.java:110)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
18:00:50,718 ERROR [WEBAPP] Class/Method: tcAction/execute encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.springframework.web.struts.DelegatingActionProxy.execute(DelegatingActionProxy.java:110)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
18:00:50,718 WARN [RequestProcessor] Unhandled Exception thrown: class java.lang.NullPointerException
18:00:50,718 ERROR [[action]] Servlet.service() for servlet action threw exception
java.lang.NullPointerException
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.springframework.web.struts.DelegatingActionProxy.execute(DelegatingActionProxy.java:110)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
</pre>
Edited by: iceman513 on Aug 11, 2010 7:14 PM
Edited by: iceman513 on Aug 24, 2010 10:32 AM
Edited by: iceman513 on Aug 24, 2010 10:33 AM

once you click a button, say, "Draw Rectangle", it should draw a rectangleYes, but you need to repaint() the component (in your case panel) to see the change.
The error is: The method paintComponent(Grpahics) is undefined for the type ObjectThe compiler never lies. As far as your code goes, you have added a method paintComponent(...) to a class that implicitly extends Object. Perhaps you wanted to create an anonymous subclass of JPanel.JPanel panel = new JPanel() {
public void paintComponent(Graphics g) {
super.paintComponent(g);
myPaint(g);
};Note the changes in brace and semicolon placement.
Also:
1. You're setting a FlowLayout to a JPanel, which is anyhow the default layout manager. And when using a layout manager, setSize calls are redundant and effectively ignored.
2. For a JFrame to be centered on the screen, setLocationRelativeTo(null) after setting the size, not before.
3. To void visual artifacts, setVisible(true) after all other properties are set.
It looks to me like you've been throwing together bits of code from here and there without adequate understanding. I recommend you go through the Swing tutorials linked from the topic listing page for this forum.
db

Some ESS iviews show only exit button and gp

I have installed ESS on EP7. When I launch some of the iviews I see only a guided procedure at the top and an exit button at the bottom of the view. How can I get the rest of the content to appear?
Thanks

The sceario is ess with an ECC 6 backend.
I found the answer, you need to set up ESS in the IMG in the backend sytsem.
Thanks

WRE54G Web Config Page Setup - also Belkin Router F5D6321

To: Users of this Linksys Community Forum
What: I'm reposting my "reply post" text from a previous post (see below). The first time I posted it, I forgot to use "html carriage returns", so the text was hard to read. The proper carriage-returns should show in the text below.
Original Post User Name: bfin1
Original Post Date-Time: 10-13-2007 08:43 PM
Original Post Message Subject Header: Re: Hi, I have a Belkin Router F5D6231-4 2.4GHz, 802.11G Wire...
Original Post Thread User Name: fabiote
Original Post Date-Time: 10-13-2007 10:02 AM
Original Post Message Subject Header: Hi, I have a Belkin Router F5D6231-4 2.4GHz, 802.11G Wire...
The original text (with carriage returns) is shown below --->:
Before you access the Range Expander's web page, you need to gather some information (that you'll need once you do access the WRE54G web page).
You need:
1) The "IP Address" (of your Router/Wireless Access Point as seen by your local network). This will be something like "192.168.1.254" (depending on your local network's range of IP addresses).
2) The "Sub-net Mask" (for your Router/Wireless Access Point as seen by your local network). Usually, this will be "255.255.255.0" (or "255.255.255.255").
3) The (Default) "Gateway" Address (for your Router/Wireless Access Point as seen by you local network). This will usually be the "first" IP address in your network's range of IP addresses. For our example network above having a range of IP addresses of 192.168.1.1 through 192.168.1.255, the first IP address is "192.168.1.1" and so the "Gateway" Address will probably be "192.168.1.1".
4) The "SSID" (Site Survey ID) of your network. This is the network name of your local network (i.e. the one you originally logged onto the network if you've already connected your computer wirelessly up with the router/wireless Access Point).
5) The "Channel" your Wireless Access Point is using (from "1" through "11". A typical "Channel" used is "6".
6) Wireless Network Encryption - you need to know if you are using encryption on your wireless network. You'll most likely either not be using it or your will be using either 40-bit (really 64-bit) WEP (Wired Equivalent Privacy) encryption, 128-bit WEP encryption, or the newer standard WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) security settings. When you get to the WRE54G web-based configuration page, you will need to "enable" Security Settings (if yoiur using it) and then, in the next web config page that appears, enter WEP encryption key or enter the WPA-PSK pre-shared key used that is currently used for your local wireless network.
NOTE: In the WRE54G web configuration page, if you are using encryption, BEFORE you enter the info (into the web-page configuration fields) noted in Item 1 through 5 above, you will want to click the "enable" button for "Wirelss Security", then click on the "Edit Security Settings" button, enter your encryption key on the next web page that appears, and then click on the "Save" button at the bottom of the web-page. The WRE54G will save your security setting to its Flash memory and then re-boot itself. You may want to unplug/replug the AC power to the WRE54G at this time and then re-log in to the WRE54G at its IP address of 192.168.1.240 (which I will explain how to do below).
Before accessing the WRE54G web-based configuration page by pointing your web browser to "192.168.1.240", do the following:
A. Connect the Ethernet cable that came with the WRE54G Ver.3 to the WRE54G (lift the small lid on the top of the WRE54G and plug the Ethernet CAT-5 cable into the RJ-45 jack there). Then plug the other end of the Ethernet cable into your computers RJ-45 jack (I assume your computer has one, right?).
B. Change your computer's IP Address to use a "Manual" IP address rather than "DHCP". Then enter the following "static" IP address: "192.168.1.50". This is an good example address, but other addresses in the range of "192.161.1.XXX" where X is 1 to 255 will work (except I would not use 192.168.1.1, 192.168.1.240, or 192.168.1.255).
C. Plug the WRE54G into the AC power. (check the lights on the WRE54G to make sure they are correct - the WRE54G startup documentation talks about this or I can give details later).
D. Boot up your computer (make sure the network setting still show "manual" IP address and a static IP address of "192.168.1.50".
E. Bring up your web browser and enter into the address field the WRE54G's IP address of "192.168.1.240".
F. In less than a minute, the web-based configuration page should appear. Proceed cautiously to enter the configuration values as I've noted above in Steps 1 - 6. After clicking on the "Save" button at the bottom of the WRE54G's web pages, the WRE54G will always do a "reboot". I suggest unplugging and replugging the WRE54G into the AC after each reboot (just to make sure a cold reboot actually happens).
NOTE: I would also suggest that you enter the "IP Address" of the Wireless Access Point (see Step 1 above) LAST after entering and saving all the other WRE54G configuration values. That way, you will still be able to log onto the WRE54G at the default IP Address of "192.168.1.240" and make sure all the values are saved correctly (in case you make a mistake and enter the wrong IP Address for the Wireless Access Point). Note that each time you reboot the WRE54G and log into it with your web browser, you will want to "Refresh" the web-page screen when you go to "192.168.1.240" so you can see the updated page contents. If you screw up the configuration, you can always use the "reset" button (you need to use a paper clip to push it) on the side of the WRE54G to reset the WRE54G back to its default values. Then you can start over from the beginning.
My experience has been that if you have correctly configured the WRE54G and it works on your wireless network, you will be able to unhook the "hard-wired" Ethernet cable (from between the WRE54G and your computer) and still be able to wirelessly access the WRE45G at its IP address of "192.168.1.240" using your web browser
If you want, you can change the WRE54G's Password (or Username and Password) to values only you know so no one will be able to get into your WRE54G and change your settings maliciously or inadvertantly. Let me know if the above helps you or just confuses you.
--- bfin1

Hi AngryDrake,
Thanks for providing that information.
Are you working from Parallels, Fusion or from some sort a VPN environment?
If you are using the printer in a virtual environment, then please try accessing the printer's EWS in a regular environment just to see if you have the same results.
Use Safari when accessing the printer's EWS, other browsers sometimes won't allow it to open.
Since the printer is setup on the network and you are able to print, you just can't access the printer's EWS, I would update the firmware on the printer which should allow you then to access the printer's EWS through a regular environment. HP LaserJet Pro M1212nf Multifunction Printer Drivers.
Select your operating system, click next, click the link for firmware.
If you are still having issue, then make sure the printer is connected directly to the Router or Airport and not a switch.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My enter button and web search orb won't work only on my homepage. Works everywhere but there. We have Yahoo for a homepage. What should I do?

We have the at&t/yahoo homepage fixed where we can check our other email account. On this page, I have just a color theme and all of the news items disabled. We have had this for three years now. Just a few days ago we noticed that when we use the search bar that is included in the middle of the page that the enter button won't work. I usually type and hit enter as opposed to clicking on the mouse button. I do have the search assistant on. I tried to disable that, but it didn't help. I have a couple of other search toolbars and they work fine with the keyboard. It's just convenient especially for my husband to have it this way. I have searched the internet for several days and have come close to what I thought would be the answer but nothing has worked yet. Most of the questions/answers were old anyway. It might not have anything to do with Firefox, I just didn't know where else to ask questions too.

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

Show and Hide button based on PL/SQL or SQL return value ( Conditional Disp

Hi
I have a button on one of my pages.
It should be seen if the date field is entered.
It should not be seen if the date filed is null. I have procedure to return a boolean . How do I make button display conditional.
Any responses and hints appreciated

Hi
I have a date field in the previous pages and when they enter date field in that form and submit, the date field value will be saved in the database. In the next page I want to check that date field and if the date field is entered in the previous page then only the button on my page should show up.
It's like if the date field in the database table is null ( if they donot enter in the previous page ) then in the next page my button should not be seen.
Thanks you for your response.

BI Publisher 10g. How to leave only one button Export, in the report?

Good day!
I'm working with Oracle BI Publisher 10g.
Tell me please how to solve the following problem!
I already have created the report, and when you view it, you can choose the format of its presentation, for example (pdf, html, ...).
You can also see these buttons : View, Analyzer, Export, ...
How can I make the report links panel of the report show only "Export" button?
I also know that when you click the Edit button and selecting a report, you can remove the checkmark from the following properties:
1) Show controls
2) Disable access to the client from Analyzer for Excel.
Then we will see in the first case that the entire selection panel has disappeared, while in the latter case, the off button Analyzer for Excel (in the presentation layer).
And if you choose to layouts-> template, you can specify output formats, for example (pdf, html, ...).
Thank you for your attention.
Alex.
Edited by: 816497 on 29.11.2010 7:59
Edited by: 816497 on 29.11.2010 7:59

I guess, you are looking for option in BIP enterprise itself, so
making the user as different roles , you can suppress it.
go thru this, to understand the roles and behaviour.
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188/T421739T475591.htm#4455931
if you going to view the report outside of this interface, e can see alternative solutions.

With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

Having same issue here:
https://discussions.apple.com/message/19043181#19043181

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.

881W wireless http config page shows only "Enter" button

Similar Messages

Maybe you are looking for