8820 BLANK WHITE SCREEN WITH NO HOURGLASS
Hi, i haven't used my 8820 for a while. When i turn it on today, it shows a blank white screen with no hourglass. I can still receive calls but still nothing in the Menu or the home screen shows. Please help me ASAP!
Hi LocPham and welcome to the BlackBerry Support Community Forums!
I would suggest performing a backup of your BlackBerry smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?
Tried all the usual restarts. Help?
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
===========
Your profile is a complete blank!!!!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.*** -
I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?
What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache -
My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
== This happened ==
Every time Firefox openedDavid. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim
-
When I export slideshows the result is a file with only the first picture then a blank white screen with music. Apple bug or am I missing the obvious?
Usually when the phone shows just the white Apple logo, it indicates an issue with the system software that prevents the phone from finishing it's boot sequence. When this happens, you will need to restore the phone, which removes all data and replaces the system software with a fresh set.
Since the phone is not seen in iTunes when it's in this state, you will have to put it into DFU mode for iTunes to see it.
To put the phone in DFU mode:
- make sure the phone is connected to a computer with the current version of iTunes on it.
- hold the sleep/wake button and the home button simultaneously for 8 seconds.
- let go of the sleep/wake button and continue pressing the home button. The iTunes screen will show a short progress bar then show a dialog box stating that an iPod was detected that is in recovery mode.
-click OK
-click the Restore button in the middle of the iTunes page
After the restore the phone should be back up and running and you can sync your data back. -
After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help
Avoid using hand-tools or power equipment .
"My mac book did not come with dvd. Now what should i do?"
Bring it to the Apple store. They can help. -
I have a blank white screen with a flashing file folder
What do I do if I have a blank white screen with a flashing file folder?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install disk in the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
When I start my computer instead of just going to the main screen it goes straight to a blank white page with a folder with a question mark on it that keeps flashing. What's wrong with it?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
Quicktime on some websites is playing with a blank white screen with audio
I am finding that on some web sites quicktime sometimes plays improperly in Firefox in a recent build. I get a blank white screen but the audio still plays. I have spoken to others who are experiencing the same issue.
The issue will sometimes resolve itself if the window is resized, the scroll bar is moved or the page is refreshed. The later only works occasionally.
It is not occurring on the machine that I'm writing this from. It is happening on both PPC Macs as well as Intel Macs.They only charge you the $49 for talking to someone on the phone, which I don't recommend anyways because lots of times the machine needs to actually be looked at.
I would reserve an appointment at the Apple Store Genius Bar. They DO NOT charge you even if you don't have a warranty. They only charge you if you want them to fix it for you, not for the actual diagnosis of the problem. If you can fix it yourself, they can show you for free and you can do it.
If you want them to fix it for you, they will charge you for the labor, not the actual appointment.
http://apple.com/retail/geniusbar -
Opens to a blank screen with the little color wheel running indicating that something is running everytime I put my mouse on page. I also cannot close the page or do anything concerning this page when the little wheel is running. This has gone on for hours. I can only close the page by doing a hard shutdown of by Mac Book Pro. Never had this happen before.
Your main library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Urgently need help: blank white screen at start with unusual symbol...
Hi guys,
I just turned on my 24 inch early-2008 model iMac, and it came up with a blank white screen, with a grey circle and a line through the middle of the circle. It doesn't say what this means in the manual. Recently, I have been having numerous troubles with my iMac, and I have seen the symbol of the grey folder with the question mark, but not this new symbol. I only just got off the phone to the Apple people when this happened.
What does this mean? Is my computer done for?Have a read here http://support.apple.com/kb/TS2570
For starters, start your Mac while holding down the Alt/Option-key until the Boot Selection screen is shown.
Choose to boot into OSX (usually the icon labeled Macintosh HD).
If succesful and you get into OSX go to System Preferences the Startup Volume and reset your OSX to be the default.
Stefan -
Blackberry 8830 - Blank White Screen
I have a user who's reported having a white screen on his Blackberry 8830. I've seen before a white screen with an hourglass in the middle, or with small black text, but the user reports that the screen is completely blank. I've had the user do a hard restart (removing/reinserting the battery), along with reinstalling the Desktop Manager software, and it still hasn't fixed the user's problem (even after trying to use the Application Loader).
Is there something I'm missing? Is the Blackberry hosed? It's one that was passed down to him when he took over his current position.Hi JonzoR82,
You said that you "reinstalling the Desktop Manager software".
Did you actually use thwe application loader to downlaod the OS to the handset?
Remember thatyou will need to go into Advanced and select to wipe all application data and reinstall everything form scratch (all the data is going to be hosed, irregardless).
The screen going white should be able to be fixed with an OS reload...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq -
Blank White Screen Appears after deploying the form on server
Hi Experts,
We have one strange issue with the interactive form developed.
One of our end user is seeing a Blank White Screen with Red cross at corner when he opens the form in portal.
The form Layout type is ZCI and Display type in Web Dynpro is Native. THe user has Adobe 9 version and working on Internet explorer 6.0.
Kindly let me know how to solve this problem.
Thanks & Regards,
Phani.Hello,
this happens when the activeX component is not installed for ACF forms. You say you have ZCI so that should not be the issue. I would recommend to try to open other PDF forms on the internet or offline using this users browser. I would re-install the Reader (well, I would use 8.1, because I´ve heard 9 has problems sometimes). And maybe try to install that activeX component. And... now it reminds me of... check his browser security properties, maybe he is so "secure" that he cannot see the form.
Otto -
k when i double click on the fire fox short cut on my desk top or the tab under the start button, my firefox gives me a blank white screen with the phase " new tab" on the top left hand corner as if u clicked for another window. Even though its the 1st window that opens. when i type a website in the search bar it regristers but it just goes to the blank white screen w the new tab phase. i tried to open some of my bookmark sites and still the same thing.. a blank all white page. ive tried re-download the fire fox 6.0 then i deleted my current firefix then re-downloaded it again.. still nothing :(. im currently usaing my interner explore to write this and search the net.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.
Maybe you are looking for
-
How to move the contents of an itab from one class to another...
Hello Experts, How can I move the contents of an internal table for a given class to another class. I want to transfer the contents of my internal table lt_vbak to another class which is lcl_get_docflow. Below is my code: REPORT zsd_orderstage
-
PDF displays differently in Acrobat 8 to 7 or 9?
An external supplied PDF exported from Indesign CS4 all fonts embedded was imported into Prinergy and refined. If the Prinergy PDF is opened in Acrobat 7 or 9 it looks like the original and the Prinergy PDF is dropped onto a hotfolder and printed ou
-
Problem with power list RFX on Sourcing
Hello, When i refresh the power list of FRX created on SRM, there is no output, any result. Please how can i resolve it? Thanks
-
when i am trying to open <b>www.iviewstudio.com</b> i m geing error message or in The web it it unable to find iviewstudio if iviewstudio is no there then what about The Business Package concept is there any new site from where i can get business pac
-
Capturing video in Imovie - single field processing (again...)
Hi! Let's start by saying that I've read a number of threads already on the 'single field processing' issues with iMovie (08 and up). What's not really clear to me yet, is at what stage (during capturing, editing, exporting, etc.) this single field p