8900: All Keys + Trackball wont work.

Hello,
I have the 8900 and my carrier is Tata Docomo. None of the keys and the trackball are working, This includes the mute key on top of the phone, the lock key, the side push button keys , . .  all keys are not working. And neither is the trackball.
I flashed the OS, as in reinstalled the OS, 5.0.090 (Platform 4.0.023) but that didnt solve the problem.
I've also plugged out the media card, to avoid any conflicts.
Have done hard resets of course, but thats not helped either.
Except for the keys not functioning, the phone is otherwise functioning, I can recieve calls, which I of course cant pick up. I am being able to use it as a modem and connect to the internet using Desktop Manager. The Desktp manager is detecting the phone, too.
The Desktop manager version I am using is 5.0.1.11.
Out of the 252.5 M device space available, I have 131.0 M free.
Please help!
Solved!
Go to Solution.

I found a solution...maybe 
ok, so this same thing happened to my 8900 yesterday and after countless battery pulls, swaps etc. i finally just let  the thing drain itself out of battery. as soon as it had died, i plugged it back into the wall and pressed the power button. I don't know why this worked, but when the screen came back on i could use all my buttons and trackball again! I suggest you try that, might sound stupid but it worked for me!  
--hope that helps

Similar Messages

  • DROID Physical Keyboard Problem - All keys don't work!

    Like many others, I switched to VZW in December from an iPhone so using a virtual keyboard was familiar to me - however, I had tried using the physical keyboard but noticed that not all the keys work (i.e. the space bar, backspace (delete)).  I simply wrote it up as quirk and thought it was something that would be corrected in a future update (2.0 -> 2.1).  Now 2.2 is about to be pushed any day now and rather that be optimistic that it's a firmware issue, has anyone else had this problem?
    I've done a factory reset on the device so it currently has nothing but the stock applications that it came with; so it can't be a market app that's causing an issue.

    Hi.  I am sorry you are having issues with your keyboard and I will be happy to help you from here.  I haven't had issues with my keyboard at all.   How long has this been going on?  It sounds like a hardware issue that we can help you with by going into the local store.
    Please let me know if you have any other questions.  
    Thanks!

  • "Write Key.vi" wont work after build

    I am having dificulty with the "Write Key.vi"  I am using it to save calibration values to an .ini file. This works fine when running in development mode but after I build it into a standalone exe it doesn't work. It will create the file in the correct folder but it is empty. I have no idea how to start figuing this one out. Any help would be greatly appreciated.
    Here is the code that saves the configuration values into the .ini file. I am using LabVIEW 8.0
    Solved!
    Go to Solution.

    smercurio_fc wrote:
    Why Does My Executable Not Work When Using the Current VI's Path Constant? - KnowledgeBase - Support...
    One other thing to mention is that KB is for LabVIEW 8.2.  In 2009 and 2010 a built EXE by default may have VIs referenced deeper than just one level.  You can keep stripping the path until a directory is found, or an easier solution is to check the box in the Advanced section that is "Use LabVIEW 8.x file layout" which then makes that KB valid again.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • 'O' Key Wont Work Sometimes

    Yesterday my 'O' key randomly started to go weird; all of my other buttons work perfectly but when I press the 'O' button, sometimes it wont work. I have absolutely no idea what has caused this but any help would be amazing! The phone is 8 days old and uninsured so I need a fix as I can't send it back!
    Thanks in advance!

    Since it seems to be a hardware problem, so would request you to visit nearest Blackberry Authorised Service Station who can look into the matter and can suggest.
    Because your problem doesnt seems to be a software issue which can be resolved online.
    Hope that resolves your issue!

  • Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    Hi,
    I would try a Safe Boot first.  (This will take longer than a normal Boot and you will need to Restart afterwards).
    If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions.  (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
    With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs.  (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
    If a Safe Boot does not work I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
    Do you have an older version of iGlasses installed ?
    The one for Leopard does not work for Snow Leopard.
    Do you have  Web Browser open ?
    This may point to  Google Video Chat Plug-in and Flash Conflict.  It would be rare to allow another app to access the camera even if not displayiong a Pic. 
    (Chrome Installs the Plug-in as does the standalone download).
    Knowing  what "any application" exactly you are trying might help us pin it down.
    Any additional downloaded  apps that can use the camera ?
    Do you happen to have something balck in front of the camera ?
    8:20 PM      Sunday; October 9, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Drag and drop feature on the project panel doesnt work. Cant adjust scale or any numer properties by sliding mouse. (click drag wont work at all nowhere)

    This issue just happened out of the blue. The last thing I did was create a new comp and import an Illustrator file.  Working on CC2014. Its like the mouse's left click wont be working at all... but that's not the case.  Cant even drag the comps in the composition, or move the layers around....
    Now the issue affects everything I do in After Effects, even on a new comp with just a plain solid
    Deleted cache,
    reseted workspaces,
    open/close after effects
    restarted computer
    newcomp with just a solid and nothing.
    plugged unplugged wireless mouse
    changed to wired mouse
    the issue is still there
    Curiously, after writing this post , publishing, and going back to after effects, the mouse will work, but for a couple of clicks or so then wont work again. This only happens on After Effects
    Mensaje editado por: Oswaldo Montúfar

    You're Right
    Its an Gigabyte GA-Z68XP-UD4   with an i7 k2600 clocked to 4.2ghz   w 16gbRam at 1333mhz
    Dual GPU , gtx 760 and gtx 780ti
    Running Windows 7 ultimate.
    The keyboard is a Genius G110  plus a wireless mouse Genius also.
    Adobe guys tried resetting cache (different than deleting) and user preferences, creating new user, disabling both video cards . The issue was still there.
    BTW!, After I switched windows in Win7 environment ( from after effects to the browser)  the mouse drag worked again. I could move objects in comp window, scale; move sliders on time line and drag projects to folders in project window... everything fine until i pressed ANY key, say, shift key or ctrl key.
    Probably we will never have the answer for this, since i had to format the C drive  (i have work to do). Currently i'm installing CC again. So if problem persists, I'll ditch the computer through the window.

  • My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

    My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to  Icloud, Can any body guide, Why, I can not.

    Hi dip_kinu,
    I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
    Apple - My Apple ID: Find your Apple ID
    https://iforgot.apple.com/appleid
    Regards,
    - Brenden

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    rajlego,
    in the Keyboard pane of System Preferences, select the Shortcuts tab, and then select Mission Control on the left-hand side. On the right-hand side, make sure that the Mission Control checkbox is checked, double-click on its current key combination (by default “^↑”) so that the key combination is highlighted, and then press the F3 button — that will set its shortcut to be F3. You can now press F3 to bring up Mission Control without needing to also press the Fn button.

  • Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?

    Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
    I updated itunes and everything but nothings working and i just can't figure it out?
    Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!

    Loop
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I had to change my hard drive, now i'v tried to reinstall itunes, it is saying i have to restore my ipod touch to factory settings, will i loose all my films by doing this, as now my ipod wont work anyway unless i restore ?

    I had to change my hard drive, now i'v tried to reinstall itunes it says i have to restore my iopd touch to factory settings and will loose my files. I have a few films on there and they show up on my purchases.If i restore, will i be able to get my films back ? as at the moment my ipod wont work now untill i restore anyway.

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
    Here's how to:
    Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • All of a sudden my Enter key no longer works in SQL Developer.

    All of a sudden my Enter key no longer works in SQL Developer. I don't know how I managed to disabled it. Can anyone tell me how to re-enable it?
    I already tried the following:
    - I closed the application and re-opened it. - It didn't work
    - I re-started my machine. I didn't work
    Help! Thank you

    The same thing has just happened to me and this was very useful to correct the problem --- but now I am wondering why or how this happened. To the best of my knowledge, I haven't make any setting changes so why did I lose the Enter action?

  • When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    - Have you tried the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camer notification
    http://support.apple.com/kb/TS1500
    - Do you have any camera, scanner or similar software installed?  That may prevent iTunes from seeing the iPod.

  • TS3694 My iphone 4 has died and says connect to itunes.  itunes restore wont work, error message 2001, then 2006 appears.  Tried all the troubleshooting help, but nothing works.  Any ideas???

    My iphone 4 has died and says connect to itunes.  itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???

    I solved my own problem. Hopefully this will help someone else.
    I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order.

  • Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

    I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
    like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
    You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
    As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
    That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

Maybe you are looking for