8900 recurring issue with all buttons

Hi There,
my blackberry curve has stopped working again, this is the third time that the fault has developed and this time it lasted a week, each time the device gets returned I'm assured that the fault has been rectified. So far its had the software upgraded, its also had the keypad replaced and an internal service and its now broken again
I have been onto vodafone and all they can do is repair the device again but there getting nowhere with it as each repair only lasts a week
is there anyway I can get this replaced through blackberry as vodafone seem to be completely rubbish at resolving this one
I don't even mind getting a refurbished unit or an older model, just something that works.
I have tried redoing the firmware, I have also done numerous battery pulls but I'm getting no luck

that's probably  moisture issues, if you've replaced the keyboard itself, then it is very very likely in the circuits/electronics beneath.
Here is how i would normally deal with moisture issues, but in your case, it is likely to long gone. Even if your moisture indicator doesn't show a problem, it is.
It sounds like what I have seen multiple times on a device with moisture damage.
Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
It really is more common than you think.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
*Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !! :)

    I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !!

    Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

  • Having issues with all net browsers eg. chrome, safari

    Having issues with all my net browers eg. Chrome, Safari and FIrefox have been invaded by what appears to be a virus. It creates pop ups on random words on unrelated sites by colouring them blue or green and underlining them twice. It seems to be tagged Dropdown Coupons or something ......I am inundated with pics of Dr Oz and how to remove fat ........it is slowly taking over everything.
    Anyone else had this bug....any idea how to get rid of it........have cleaned cookies. etc.......have tried uninstalling browsers and reinstalling to no avail........any help or advice would be great. I have no antivirus on my mac as have never needed any before
    cheers in advance
    Jo

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Anyone have an issue withe airplay button not being available?

    Anyone have an issue withe airplay button not being available?

    Since the last pair of updates, my game camera won't pan around in any adventure level, leaving many sub levels off screen.  This is happening in all community adventure levels as well as my own on my moon.  Also can't seem to decorate my adventure levels without experiencing major glitches, especially with changing the materials.  The updates fixed a lot of stuff, but it seems like they trashed some things too.

  • Adobe Reader X:Recurring issues with print and save requiring reinstalls

    One of our staff has recurring issues with PDF print, view, save.  These issue are temporarily resolved by re-installing the Reader from the Adobe website.  No error messages are displayed - the functions just cease to work.  In the most recent iteration of the issue a document attached to an email could be saved (right mouse click, save as) within the email program but not within the Reader itself. 
    It appears that Reader is getting corrupted - but by what?  This individual does a lot of downloading of web published PDFs - a possible source but one I can't confirm. 
    Information on a permanent resolution or known cause would be greatly appreciated.

    Thanks v much Twilight - once I had posted the question I saw the same issues were posted by another.
    I'll try the print as image under the advanced print tab and see how I get on with that. Hopefully Adobe will bring out a fix soon.
    Thanks again.
    Cattswood

  • HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

    Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify.  It is as if airplay is not runing.  A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
    I have verified that my iPad mini and apple TV is up to date.
    Airplay enabled, the network is connected with internet.
    It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • Issues with rollover buttons in Indesign CS6

    Hi,  I was wondering if anyone can shed some light on a issue i'm currently having. 
    I've produced a interactive map in Indesign, with rollover buttons which triggers an animation - all the buttons and animations seem to be set up correctly and once I export as a SWF they seem to work fine initially, but after a couple of rollovers some of the buttons just stop working.  If I refresh the page or reopen the swf file it then starts working again for a period, but again after a few successful rollovers some stop working again.  I'm wondering if this is a bug of some sort?  Ive also tested the .swf on a different machine and I experience the same issue.
    Any help with this would be be much appreciated.

    We might be able to help you but you'll have to drop the attitude. We're not Adobe here, but users like you.
    You'll need to tell us exactly what you're doing and what's not working for you. By "rollovers," you could mean the change of appearance of a button. You could also be meaning what are sometimes called Show/Hide buttons where clicking a button causes another button to appear. Which is it?
    And what kind of output are you attempting? Interactive PDF? SWF (Flash)? DPS?

  • Microphone Issues with All-in-One PC

    I recently bought an HP Pavilion 23-g013w All-in-One PC, and for the first week I had absolutely no issues with it at all. Unfortunately, today I accepted a Skype call and the other person could hear nothing but computer noises coming from my microphone. My voice was either extremely muffled at points, or impossible to hear at all.
    I've run the troubleshooter, and set my microphone settings to everything mentioned in the sound guide. I'm using Windows 8.1.
    Not sure what else to do to try and make this better.

    Kristen, welcome to the forum.
    Here is a guide that may help you solve your problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HELP!! Issue with mailto button in PDF

    Hi
    I have a button in a PDF form that attaches default email (LOTUS NOTES) when clicked. I have my settings in IE set to Lotus Notes as my default client and also in Lotus Notes I have the same settings.
    The form however does not work sometimes when the button is clicked, nothing happens. It works fine for me but doesn't on another computer with the same settings.
    Is this an issue with the PDF or Lotus Notes? If so any suggestions?
    Thanks

    Hi
    Both machines are running windows XP SP 3
    I have done some google-ing the issue but I didn't get any useful information.
    I tried it on the second computer again and it says no 'email exits'
    Any help on why this is happening will be very useful.
    thanks in advance!!

  • Firefox Issue With Back button

    I am having an issue with SpryHorizontal Menus in Firefox when using the back button.  Even did a tutorial with Lynda.com and found their solution file had the same issue.  Would anyone who has had success with 3 levels of submenus care to share a snippet of their code as I cannot find the error and outside help hasn't quite resolved the issue.
    My code is following this basic outline
    <li><div align="center"><a class="MenuBarItemSubmenu" href="#">Academics</a></div>
          <ul id="Academics">
            <li><a class="MenuBarItemSubmenu" href="#">Departments</a>
                <ul id="Departments">
                  <li><a href="../tsc_bustech.htm">Business Technologies</a></li>
        <li><a href="../tsc_communications.htm"><font="11.75px">Communications</font></a></li>
          <li><a href=""../tsc_ethics”/>Ethics</a></li>
                  <li><a href="../tsc_finearts_hum.htm">Fine Arts and Humanities</a></li>
                  <li><a href="../tsc_math.html">Mathematics</a></li>
                  <li><a href="#">Natural Sciences</a> 
            <ul id="naturalsciences">
        <li><a href="../tsc_bioscience.html">Biological Sciences</a></li>
          <li><a href="../tsc_physicalscience.html">Physical Sciences</a></li>
        </ul>
              </li>
                <li><a href="../tsc_socialscience.htm">Social and Behavioral Sciences</a></li>
                </ul>
            </li>
    Thank you.

    Hi Beth,
    Just an FYI.  Also received another nice piece of information to store in the SpryAssets help file from an online Adobe Certified Course Director:
    Thanks for your email! It isn’t often I get a great question like that. I had to do some digging, but I came up with a solution. You might have already worked your way through it, but if not the problem is Firefox’s (and Opera’s) caching that’s causing the issue in question. To fix it, you have to reset the submenu dynamic class names when the user clicks the link (re-caching the page is a bad idea).
    This is a pretty simple javascript fix. The problem was so interesting that I posted the fix to my blog. You can check out the solution here: http://www.simpleprimate.com/?p=30 if you haven’t already figured it out.
    Maria

  • Recurring issue with mobile upload

    Hi all,
    Using Lightroom 5.6, I am experiencing ongoing issues with synchronising  (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload),  It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
    Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
    Meantime, can support please reset my connection?
    Regards .... Alastair

    Hi Alastair,
    I've contacted you privately.
    Thanks,
    Ignacio

  • Buggy issues with keyboard buttons.

    Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
    Anyone else have these issues? These are just some of the issues that pop up.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Help! MASSIVE MacbookPro ISSUES with all mac softwares - diagnostic report incl.

    Hello all,
    I have posted something almost 1 year ago but never got a reply.. The issues became so bad lately that even checking emails becomes a performance (for my nerves..)
    My computer is a Macbookpro from mid-2012 OSX 10.8.5
    bought in 2013, in france (azerty keyboard)
    (NOTE: I'm french, so some of my terms might be a translation of the error messages i get in my descriptions)
    The 2 browsers I'm using (ideally in parallel) are Safari & Chrome, I have their latest versions for both ot them
    The programs i'm mostly using are : those 2 browsers, textedit, itunes, sometimes preview and rarely iphoto (but nowadays, only safari and textedit, as every click already takes up to 40sec...)
    Here are the issues I'm experiencing daily:
    - Any click, any command takes a min. of 5sec to be fullfiled - sometimes up to 30sec - be it wanting to switch from one progr to another or turning the volume up/down via the keyboard)
    - Rainbow ball spinning at almost every click i make..
    - When i open a finder window, it takes min. a few seconds, up to 10sec for its content to appear
    - If 2 finder windws are open, sometimes clicking on one of them does not put in the front (the other window remains, overlapping the one i'm selecting though)
    - same thing happens with a finder window and itunes
    - Pages on ANY browser take sometimes up to 40 sec to load
    - Chrome gives me all the time the message that "the pages so and so won't respond" and that i can either "wait" or "close" those windows.. waiting moslty won't help.. - i have to quit the program.. wich mosly doesn't work.. so i try to force quit..which also sometimes doesn't work..or only after several minutes...
    - When opening a progr. in the dock bar, the prog icon keeps bouncing over and over (takes between 15sec-1mn for the program to open, nomatter which one)
    - Lately, when reopening Chrome, some tabs are missing : not being retaured, they are just ..gone.
    In SAFARI:
    - as soon as not ON a tab left open on browser, the page is first completely WHITE (takes up to 30sec for content to appear)
    - Safari "force reloads" all page and tabs open several times a day, lately directly after restarting the browser
    - After force reloading, the page happen to be blank, and/or no address in the url bar : i have to click the "back" arrow, in order to make the url reappear,
    -..but sometimes even this isn't possible, though the name of the page is still showing on the tab window
    - After a force reload, pages such as youtube display as a simple text content - have to REload for the page to display properly
    - Computer often freezes sometimes completely,
    .. and the mouse disappears
    .. sometimes so hard (rainbow ball spinning non stop) that i can't force quit, not even shut down properly (exit through the "physical" start button as only chance)
    - Computer sometimes freezes but by making a restart on his own : screen becomes blue, grey, everything disappears, big start button symbol appears on screen with message in several languages and computer restarts on his own..
    - Dock/program bar sometimes won't show up.. all i can do is restart the computer
    - Force-Quitting programs can take up to 2 to 10 min until the force quit window appears...
    - Computer generates aliases or copies (?) of documents, that can't be open anyway, adding things in the name of doc such as "NAME.rtf.sb-0352fd77-9bU6Yb"
    - Bottom line : Mac softwares (and NO other!) crash or freeze on regular basis (such as : textedit, safari, iphoto,  preview etc.), they mostly show not to be responding in the force quit window
    ...But sometimes, one of these programs won't respond BUT no sign of it in the force quit window
    - Dashboard always takes 10 to 40 sec to make information/content appear
    ISSUES that occured ONCE lately:
    - was looking for files via the search field of the finder, it worked normally until it became all blank and nothing, not a single file would show - had to restart computer
    - could not make a copy-paste anymore from one tab to my tab with gmail account - had to restart computer.
    Desperately trying to improve if not solve those problems I happen to do more and more often those things:
    onyx automation and clean
    erasing cache in chrome and safari
    checking the disk with utility disk (always says it's all fine!)
    repairing the "rights" via utility disk progr.
    (if i happen do it every day : i happen to have an endless list each time of repaired issues)
    I also start the computer with cmd+alt+p+r.. never changed anyhting
    I recently did the SMC restart.. didn't change a thing
    I'm desperate !
    Bottom line : those problems occur ever since 2 months after i bought this computer (new!), giving it for repair 3 times and deinstalling + reinstalling the whole system 5 TIMES NEVER changed anything.. Even partitioning the disk, by following someones advice didn't change anything.. As a matter of a fact, the problems are recurrent and only becoming worse and worse...
    Last but not least, it's been 2 months now that the trackpad is "dead"..i can't press it anymore and have to use the "finger tip" mode or whatever it's called..
    Thank you for taking the time to read, I'd be super grateful for any help!
    HERE IS THE LAST (todays) DIAGNOSTIC REPORT TOO:
    Process:         mDNSResponder [42]
    Path:            /usr/sbin/mDNSResponder
    Identifier:      mDNSResponder
    Version:         ???
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [1]
    User ID:         65
    Date/Time:       2015-04-04 15:55:28.762 +0200
    OS Version:      Mac OS X 10.8.5 (12F2501)
    Report Version:  10
    Crashed Thread:  2
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000038
    VM Regions Near 0x38:
    -->
        __TEXT                 000000010ab9e000-000000010ac2e000 [  576K] r-x/rwx SM=COW  /usr/sbin/mDNSResponder
    Application Specific Information:
    mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56)
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib         0x00007fff8c670686 mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff8c66fc42 mach_msg + 70
    2   com.apple.CoreFoundation       0x00007fff86a44233 __CFRunLoopServiceMachPort + 195
    3   com.apple.CoreFoundation       0x00007fff86a49916 __CFRunLoopRun + 1078
    4   com.apple.CoreFoundation       0x00007fff86a490e2 CFRunLoopRunSpecific + 290
    5   com.apple.CoreFoundation       0x00007fff86a57dd1 CFRunLoopRun + 97
    6   mDNSResponder                 0x000000010ab9fca4 main + 3362
    7   mDNSResponder                 0x000000010abd26ac start + 52
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib         0x00007fff8c672d16 kevent + 10
    1   libdispatch.dylib             0x00007fff88aacdea _dispatch_mgr_invoke + 883
    2   libdispatch.dylib             0x00007fff88aac9ee _dispatch_mgr_thread + 54
    Thread 2 Crashed:
    0   mDNSResponder                 0x000000010aba42bd mDNS_Lock_ + 24
    1   mDNSResponder                 0x000000010abf5ac8 tcpConnectionCallback + 199
    2   mDNSResponder                 0x000000010abccfc7 tcpKQSocketCallback + 374
    3   mDNSResponder                 0x000000010abb03f9 KQueueLoop + 3003
    4   libsystem_c.dylib             0x00007fff87c0b772 _pthread_start + 327
    5   libsystem_c.dylib             0x00007fff87bf81a1 thread_start + 13
    Thread 3:
    0   libsystem_kernel.dylib         0x00007fff8c6726d6 __workq_kernreturn + 10
    1   libsystem_c.dylib             0x00007fff87c0df1c _pthread_workq_return + 25
    2   libsystem_c.dylib             0x00007fff87c0dce3 _pthread_wqthread + 412
    3   libsystem_c.dylib             0x00007fff87bf8191 start_wqthread + 13
    Thread 4:
    0   libsystem_kernel.dylib         0x00007fff8c6726d6 __workq_kernreturn + 10
    1   libsystem_c.dylib             0x00007fff87c0df1c _pthread_workq_return + 25
    2   libsystem_c.dylib             0x00007fff87c0dce3 _pthread_wqthread + 412
    3   libsystem_c.dylib             0x00007fff87bf8191 start_wqthread + 13
    Thread 2 crashed with X86 Thread State (64-bit):
      rax: 0x41876e62157f7935  rbx: 0x0000000000000000  rcx: 0x00000000000fc080  rdx: 0x00000000000f9e60
      rdi: 0x0000000000000000  rsi: 0x000000010ac1e6ee  rbp: 0x000000010aecc2a0  rsp: 0x000000010aecc280
       r8: 0x000000000000001c   r9: 0x000000004de38472  r10: 0x0000000000000000  r11: 0x000000004de38472
      r12: 0x000000010ac3ac40  r13: 0x000000010aecc420  r14: 0x000000010ac1e6ee  r15: 0x0000000000000000
      rip: 0x000000010aba42bd  rfl: 0x0000000000010206  cr2: 0x0000000000000038
    Logical CPU: 2
    Binary Images:
           0x10ab9e000 -        0x10ac2dfff  mDNSResponder (???) <1792F6EF-2D34-3047-89FC-1643D1C5C214> /usr/sbin/mDNSResponder
           0x10ac5a000 -        0x10ac5bfff  com.apple.webcontentfilter.WebFilterDNS (2.0 - 5) <7D53E6E9-BBF7-3A82-A758-557815123A5B> /System/Library/PrivateFrameworks/WebFilterDNS.framework/Versions/A/WebFilterDN S
           0x10ac61000 -        0x10ac62fff  com.apple.DeviceToDeviceManager (31.0 - 29) <6ADF4070-B53A-3CA5-888F-09D37FADC05F> /System/Library/PrivateFrameworks/DeviceToDeviceManager.framework/Versions/A/De viceToDeviceManager
           0x10accb000 -        0x10acccfff  com.apple.BluetoothD2DManagerPlugin (4.1.7 - 4.1.7f5) <73068841-54B7-3BC4-A765-A3F1B9908B06> /System/Library/PrivateFrameworks/DeviceToDeviceManager.framework/PlugIns/Bluet ooth.bundle/Contents/MacOS/Bluetooth
           0x10acd1000 -        0x10acd4fff  com.apple.airport.d2d (2.4 - 240.1) <76CD41A4-1F6E-378C-8182-E5D2E89F050D> /System/Library/PrivateFrameworks/DeviceToDeviceManager.framework/PlugIns/WiFi. bundle/Contents/MacOS/WiFi
        0x7fff6a79e000 -     0x7fff6a7d293f  dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
        0x7fff841f0000 -     0x7fff842edff7  libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
        0x7fff84419000 -     0x7fff8441afff  liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
        0x7fff8441b000 -     0x7fff84423ff7  libsystem_dnssd.dylib (379.38.1) <BDCB8566-0189-34C0-9634-35ABD3EFE25B> /usr/lib/system/libsystem_dnssd.dylib
        0x7fff84424000 -     0x7fff84428ff7  com.apple.TCC (1.0 - 1) <F2F3B753-FC73-3543-8BBE-859FDBB4D6A6> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
        0x7fff84c08000 -     0x7fff84c33fff  libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
        0x7fff84e16000 -     0x7fff84e16fff  libOpenScriptingUtil.dylib (148.3) <F8681222-0969-3B10-8BCE-C55A4B9C520C> /usr/lib/libOpenScriptingUtil.dylib
        0x7fff84ee6000 -     0x7fff84ef3fff  libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
        0x7fff85162000 -     0x7fff85164fff  libquarantine.dylib (52.1) <143B726E-DF47-37A8-90AA-F059CFD1A2E4> /usr/lib/system/libquarantine.dylib
        0x7fff85165000 -     0x7fff85166fff  libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
        0x7fff865e4000 -     0x7fff865f1ff7  com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
        0x7fff869fc000 -     0x7fff86a00fff  libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
        0x7fff86a05000 -     0x7fff86a13ff7  libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
        0x7fff86a14000 -     0x7fff86bfeff7  com.apple.CoreFoundation (6.8 - 744.19) <0F7403CA-2CB8-3D0A-992B-679701DF27CA> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff86de2000 -     0x7fff86de2fff  libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
        0x7fff87092000 -     0x7fff870a5ff7  libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
        0x7fff870aa000 -     0x7fff870d8ff7  libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
        0x7fff870d9000 -     0x7fff8718bff7  com.apple.LaunchServices (539.12 - 539.12) <A57EA823-BC17-3794-818F-72F241E22725> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
        0x7fff87195000 -     0x7fff871e6ff7  com.apple.SystemConfiguration (1.12.2 - 1.12.2) <581BF463-C15A-363B-999A-E830222FA925> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
        0x7fff8732e000 -     0x7fff8738dfff  com.apple.AE (645.6 - 645.6) <44F403C1-660A-3543-AB9C-3902E02F936F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
        0x7fff877b3000 -     0x7fff877ffff7  libauto.dylib (185.4) <AD5A4CE7-CB53-313C-9FAE-673303CC2D35> /usr/lib/libauto.dylib
        0x7fff87800000 -     0x7fff87881fff  com.apple.Metadata (10.7.0 - 707.13) <A3690F85-076C-3D42-9FA7-5C98167029E1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
        0x7fff87b0e000 -     0x7fff87b1cfff  libcommonCrypto.dylib (60027) <BAAFE0C9-BB86-3CA7-88C0-E3CBA98DA06F> /usr/lib/system/libcommonCrypto.dylib
        0x7fff87bf7000 -     0x7fff87cc3ff7  libsystem_c.dylib (825.40.1) <543B05AE-CFA5-3EFE-8E58-77225411BA6B> /usr/lib/system/libsystem_c.dylib
        0x7fff87cfb000 -     0x7fff87d69fff  com.apple.framework.IOKit (2.0.1 - 755.42.2) <18E64CC5-2671-3C47-B2C6-0EEEDF899461> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
        0x7fff87dc5000 -     0x7fff87dccfff  com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
        0x7fff88591000 -     0x7fff88595fff  libMatch.1.dylib (17) <E10E50F3-25F8-3B9B-AA11-923E40F5FFDD> /usr/lib/libMatch.1.dylib
        0x7fff88596000 -     0x7fff8859cfff  libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
        0x7fff8859d000 -     0x7fff885a0ff7  libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
        0x7fff885a1000 -     0x7fff885cafff  libsandbox.1.dylib (220.4) <E3CEE0A1-9602-31F7-8FF9-42B7B74E8592> /usr/lib/libsandbox.1.dylib
        0x7fff88655000 -     0x7fff88752fff  libsqlite3.dylib (138.1) <ADE9CB98-D77D-300C-A32A-556B7440769F> /usr/lib/libsqlite3.dylib
        0x7fff887f4000 -     0x7fff887fffff  libsystem_notify.dylib (98.6) <1E490CB2-9311-3B36-8372-37D3FB0FD818> /usr/lib/system/libsystem_notify.dylib
        0x7fff88aa8000 -     0x7fff88abdff7  libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
        0x7fff88abe000 -     0x7fff88c33fff  com.apple.CFNetwork (596.6.3 - 596.6.3) <883CE0E5-17B6-3227-B7B1-0CCC16D2739E> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
        0x7fff88c34000 -     0x7fff88c39fff  libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
        0x7fff88c56000 -     0x7fff88e56fff  libicucore.A.dylib (491.11.3) <5783D305-04E8-3D17-94F7-1CEAFA975240> /usr/lib/libicucore.A.dylib
        0x7fff89bfb000 -     0x7fff89c00fff  libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
        0x7fff89e71000 -     0x7fff89e71fff  com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
        0x7fff89eb9000 -     0x7fff89edeff7  libc++abi.dylib (26) <D86169F3-9F31-377A-9AF3-DB17142052E4> /usr/lib/libc++abi.dylib
        0x7fff89eec000 -     0x7fff89f3bff7  libcorecrypto.dylib (106.2) <CE0C29A3-C420-339B-ADAA-52F4683233CC> /usr/lib/system/libcorecrypto.dylib
        0x7fff8a400000 -     0x7fff8a469fff  libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
        0x7fff8a971000 -     0x7fff8a972ff7  libSystem.B.dylib (169.3) <9089D72D-E714-31E1-80C8-698A8E8B05AD> /usr/lib/libSystem.B.dylib
        0x7fff8aa32000 -     0x7fff8ad03fff  com.apple.security (7.0 - 55719.16.6) <E00808AF-B6C5-3EBA-A604-A97E203E7D1B> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff8b02b000 -     0x7fff8b02dff7  libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
        0x7fff8b02e000 -     0x7fff8b09bff7  com.apple.datadetectorscore (4.1 - 269.3) <5775F0DB-87D6-310D-8B03-E2AD729EFB28> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
        0x7fff8b09c000 -     0x7fff8b1b492f  libobjc.A.dylib (532.2) <90D31928-F48D-3E37-874F-220A51FD9E37> /usr/lib/libobjc.A.dylib
        0x7fff8b1b5000 -     0x7fff8b21dff7  libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
        0x7fff8b30b000 -     0x7fff8b313fff  liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
        0x7fff8b317000 -     0x7fff8b62eff7  com.apple.CoreServices.CarbonCore (1037.6 - 1037.6) <1E567A52-677F-3168-979F-5FBB0818D52B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
        0x7fff8b9f3000 -     0x7fff8ba29fff  libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
        0x7fff8c5b2000 -     0x7fff8c5e3ff7  com.apple.DictionaryServices (1.2 - 184.4) <FB0540FF-5034-3591-A28D-6887FBC220F7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
        0x7fff8c5e4000 -     0x7fff8c5eafff  com.apple.DiskArbitration (2.5.2 - 2.5.2) <C713A35A-360E-36CE-AC0A-25C86A3F50CA> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
        0x7fff8c60c000 -     0x7fff8c61aff7  libkxld.dylib (2050.48.15) <11B0E186-E47C-3833-882C-317BC0E1C10D> /usr/lib/system/libkxld.dylib
        0x7fff8c61b000 -     0x7fff8c632fff  com.apple.CFOpenDirectory (10.8 - 151.10) <10F41DA4-AD54-3F52-B898-588D9A117171> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
        0x7fff8c660000 -     0x7fff8c67bff7  libsystem_kernel.dylib (2050.48.15) <3415C7F3-5807-3F5E-ABB1-EDD9494DB207> /usr/lib/system/libsystem_kernel.dylib
        0x7fff8c702000 -     0x7fff8c78fff7  com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
        0x7fff8cc98000 -     0x7fff8ccaaff7  libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
        0x7fff8d026000 -     0x7fff8d035ff7  libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
        0x7fff8d2ba000 -     0x7fff8d619fff  com.apple.Foundation (6.8 - 945.19) <C98E55BA-553B-314B-B056-849FFB20C220> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff8da6a000 -     0x7fff8da6bff7  libsystem_sandbox.dylib (220.4) <E2A3D8A9-80A3-3666-8D8B-D22829C2B0EC> /usr/lib/system/libsystem_sandbox.dylib
        0x7fff8da6c000 -     0x7fff8da72ff7  libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
        0x7fff8dda4000 -     0x7fff8de4aff7  com.apple.CoreServices.OSServices (557.6 - 557.6) <E91B0882-E75C-30E9-8DCD-7A0EEE4405CC> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
        0x7fff8dee8000 -     0x7fff8df09ff7  libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
        0x7fff8e0c8000 -     0x7fff8e0dffff  com.apple.GenerationalStorage (1.1 - 132.3) <FD4A84B3-13A8-3C60-A59E-25A361447A17> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
        0x7fff8e67a000 -     0x7fff8e681ff7  libcopyfile.dylib (89.0.70) <30824A67-6743-3D99-8DC3-92578FA9D7CB> /usr/lib/system/libcopyfile.dylib
        0x7fff8f3b8000 -     0x7fff8f3daff7  libxpc.dylib (140.43) <70BC645B-6952-3264-930C-C835010CCEF9> /usr/lib/system/libxpc.dylib
        0x7fff90156000 -     0x7fff90157fff  libDiagnosticMessagesClient.dylib (8) <8548E0DC-0D2F-30B6-B045-FE8A038E76D8> /usr/lib/libDiagnosticMessagesClient.dylib
        0x7fff90158000 -     0x7fff90159ff7  libdnsinfo.dylib (453.19) <14202FFB-C3CA-3FCC-94B0-14611BF8692D> /usr/lib/system/libdnsinfo.dylib
        0x7fff90bf3000 -     0x7fff90bf4ff7  libremovefile.dylib (23.2) <6763BC8E-18B8-3AD9-8FFA-B43713A7264F> /usr/lib/system/libremovefile.dylib
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 38
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 4696
        thread_create: 1
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=80.1M resident=29.4M(37%) swapped_out_or_unallocated=50.7M(63%)
    Writable regions: Total=60.7M written=1348K(2%) resident=1256K(2%) swapped_out=384K(1%) unallocated=59.5M(98%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    MALLOC                             50.4M
    MALLOC guard page                    32K
    STACK GUARD                        56.0M
    Stack                              10.0M
    VM_ALLOCATE                           8K
    __DATA                             3300K
    __LINKEDIT                         52.3M
    __TEXT                             27.8M
    __UNICODE                           544K
    mapped file                          32K
    shared memory                        12K
    ===========                      =======
    TOTAL                             200.4M

    deekaygee wrote:
    Csound1 wrote:
    Open Contacts, see what accounts are attached to it, only the contacts in the iCloud account 'pushes' to iCloud.
    Understood. But if I really want the iCloud contacts to synchronize with the contacts "On My Mac", do I have to manually copy and paste (or drag) in the Contacts application? Is this really the definition of "synchronization" ?
    Again. The 'On My Mac' account is a local account, it's on your Mac (hence the name) but not anywhere else.
    You may be trying to sync it to iCloud but you will fail, put the contacts where they need to be, if you want them distributed by iCloud they will need to be in the iCloud account.
    One simple way to move them is to export the On My Mac account to a vcard file and then import the vcard file into the iCloud account (do all this in Contacts, not the website)
    deekaygee wrote:
    Additionally - will the iCloud contacts remain visibile on the computer when a web connection is unavailable? And - if so - what is the function of "On My Mac" contacts. (Just a bit confused over the concept, I suppose...)
    Yes to the first question and as for the second, if you didn't have iCloud where would you keep your contacts?

  • Spry validation issue with submit button

    Hi,
    I'm new to Spry but am having an issue getting it to work at all.  I created a very simply form (i.e. table with Spry text field and submit button).  I've read many articles and been to several forums, but I can't seem to find the issue I'm having.  Basically, when I go to preview the page in a browser, the table with the Spy text field and submit button comes up fine, but when I hit the submit button, I see the page refresh and any values I had in the text field disappear, but nothing ever comes up saying "A value is required," which is what I'm looking for. This happens even if I don't have any values in the text field.  Below are images of what I'm describing and also the code.  I verified that the "Required" check box is checked in the SpryTextField and the submit button action is selected to "Submit Form."  My setup is Win 7, DW6, & XAMPP.  Any help you can provide would be greatly appreciated.
    Before Submit Button pressed:
    Browser after button pressed: (same as above but no message saying "A value is required.")
    Code:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    <script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
    </head>
    <body>
    test
    <table width="600" border="1">
      <tr>
        <td><form id="form1" name="form1" method="post" action="">
          <span id="sprytextfield1">
          <label for="test"></label>
          <input type="text" name="test" id="test" />
          <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span>
        </form></td>
      </tr>
      <tr>
        <td> </td>
      </tr>
      <tr>
        <td> </td>
      </tr>
      <tr>
        <td> </td>
      </tr>
      <tr>
        <td><form id="form2" name="form2" method="post" action="">
          <input type="submit" name="submit" id="submit" value="Submit" />
        </form></td>
      </tr>
      <tr>
        <td> </td>
      </tr>
    </table>
    <script type="text/javascript">
    var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "email");
    </script>
    </body>
    </html>

    Do yourself a big favor and don't waste time with Spry Validation.  Most modern browsers support HTML5 forms with the required attribute. 
    If you must placate older browsers, use jQuery validate script.  It's lightweight and works when HTML5 support is missing.  You can see an example below. If you hit submit with empty form fields, the required fields pop-up with messages.  View source in browser to see the code. 
    HTML5 Form with jQuery Validation
    Nancy O.

  • Issue with nav buttons in an image gallery

    Hello,
    I'm very new to flash and am using CS4/AS3. I have three image galleries of three images each. The images load dynamically from files on my computer. I've set it up so that when you click on a tab, you see a different set of three images.
    The images load properly and it works to click forward to view them (that is, clicking on the image itself or the forward nav arrow). The issue I'm having is with the backward nav arrow. I keep geting an error message "Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found" when I click it.
    The backward nav arrow works on the first gallery (egypt gallery) if I click that one first. But it doesn't work on the other two, and if I click back to the Egypt gallery after having been in the other two galleries, the back navigation no longer works in their either.
    Basically, I want the user to be able to click on a tab to load the images, and then be able to click back and forth between the images. If they reach the last image in a gallery, I just want it to stop advancing and stay put on the final image, but for the user to be able to click backwards through them if desired. My code is pasted below (I'm sure it's more complicated than it needs to be... just a result of me being a complete novice!)
    Any help or suggestions would be very much appreciated. Thanks so much.
    stop();
    //egypt gallery//
    var myloader:Loader = new Loader();
    var myrequest:URLRequest = new URLRequest("images1/egypt1.jpg")
    var counter:Number=1
    var total:int=3;
    egypt_mc.addEventListener(MouseEvent.CLICK, cover);
    function cover (e:MouseEvent):void{
    object1_mc.x=414.15;
    object1_mc.y=101.35;
    object2_mc.x=520;
    object2_mc.y=60;
    object3_mc.x=630;
    object3_mc.y=60;
    left_mc.x=15;
    left_mc.y=340;
    right_mc.x=680;
    right_mc.y=340;
    stage.addChild(myloader);
    myloader.x = 28;
    myloader.y = 175;
    myloader.load(myrequest);
    myloader2.unload();
    myloader3.unload();
    myloader.addEventListener(MouseEvent.CLICK, shownextpicture)
    function shownextpicture(e:MouseEvent):void{
    counter = counter + 1;
    if(counter<=total){
    myrequest.url="images1/egypt"+counter+".jpg"
    myloader.load(myrequest)
    right_mc.addEventListener(MouseEvent.CLICK, forward)
    function forward(e:MouseEvent):void{
    counter = counter + 1;
    if(counter<=total){
    myrequest.url="images1/egypt"+counter+".jpg"
    myloader.load(myrequest)
    left_mc.addEventListener(MouseEvent.CLICK, back)
    function back(e:MouseEvent):void{
    counter = counter - 1;
    if(counter>0){
    myrequest.url="images1/egypt"+counter+".jpg"
    myloader.load(myrequest)
    //wikileaks gallery//
    var myloader2:Loader = new Loader();
    var myrequest2:URLRequest = new URLRequest("images2/wikileaks4.jpg")
    var counter2:Number=4
    var total2:int=6;
    wiki_mc.addEventListener(MouseEvent.CLICK, cover2);
    function cover2 (e:MouseEvent):void{
    object1_mc.x=410;
    object1_mc.y=60;
    object2_mc.x=521.35;
    object2_mc.y=102;
    object3_mc.x=630;
    object3_mc.y=60;
    left2_mc.x=15;
    left2_mc.y=340;
    right2_mc.x=680;
    right2_mc.y=340;
    stage.addChild(myloader2);
    myloader2.x = 28;
    myloader2.y = 175;
    myloader2.load(myrequest2);
    myloader.unload();
    myloader2.unload();
    myloader2.addEventListener(MouseEvent.CLICK, shownextpicture2)
    function shownextpicture2(e:MouseEvent):void{
    counter2 = counter2 + 1;
    if(counter2<=total2){
    myrequest2.url="images2/wikileaks"+counter2+".jpg"
    myloader2.load(myrequest2)
    right2_mc.addEventListener(MouseEvent.CLICK, forward2)
    function forward2(e:MouseEvent):void{
    counter2 = counter2 + 1;
    if(counter2<=total2){
    myrequest2.url="images2/wikileaks"+counter2+".jpg"
    myloader2.load(myrequest2)
    left2_mc.addEventListener(MouseEvent.CLICK, back2)
    function back2(e:MouseEvent):void{
    counter2 = counter2 - 1;
    if(counter2>4){
    myrequest.url="images2/wikileaks"+counter2+".jpg"
    myloader2.load(myrequest2)
    //scientology gallery//
    var myloader3:Loader = new Loader();
    var myrequest3:URLRequest = new URLRequest("images3/scientology7.jpg")
    var counter3:Number=7
    var total3:int=9;
    scien_mc.addEventListener(MouseEvent.CLICK, cover3);
    function cover3 (e:MouseEvent):void{
    object1_mc.x=410;
    object1_mc.y=60;
    object2_mc.x=520;
    object2_mc.y=60;
    object3_mc.x=629.95;
    object3_mc.y=100.8;
    left3_mc.x=15;
    left3_mc.y=340;
    right3_mc.x=680;
    right3_mc.y=340;
    stage.addChild(myloader3);
    myloader3.x = 28;
    myloader3.y = 175;
    myloader3.load(myrequest3);
    myloader.unload();
    myloader2.unload();
    myloader3.addEventListener(MouseEvent.CLICK, shownextpicture3)
    function shownextpicture3(e:MouseEvent):void{
    counter3 = counter3 + 1;
    if(counter3<=total3){
    myrequest3.url="images3/scientology"+counter3+".jpg"
    myloader3.load(myrequest3)
    right3_mc.addEventListener(MouseEvent.CLICK, forward3)
    function forward3(e:MouseEvent):void{
    counter3 = counter3 + 1;
    if(counter3<=total3){
    myrequest3.url="images3/scientology"+counter3+".jpg"
    myloader3.load(myrequest3)
    left_mc.addEventListener(MouseEvent.CLICK, back3)
    function back3(e:MouseEvent):void{
    counter = counter - 1;
    if(counter>0){
    myrequest.url="images3/scientology"+counter+".jpg"
    myloader.load(myrequest)

    You want to have the trace triggered when the problem occurs, so if the problem occurs when you use your back button, then you want to tie it in to that somehow.  I don't know why you are trying to trace all that you show.  The main thing you want to find out is why it is not finding the file, which will be defined by whatever value it is trying to use as a url.  Try to focus on the data you need to see and not just anything that comes to mind.

Maybe you are looking for