890FXA-GD70 problems with 4 stick of ram

I just built a new rig around the 890FXA-GD70 MB and everything is going great except I have major stability problems with 4 sticks of Ram installed. I purchased 4 sticks of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 from Newegg. The PC will boot fine with all 4 sticks installed and Windows 7 recognizes them but I have a lot of application crashes. No BSOD so far but very frequent app problems. Even the windows event viewer keeps crashing while trying to troubleshoot. I removed two of the sticks and everything has been rock solid. Anyone else successfully running 4 sticks in this board or have any suggestions to stabilize? I'm not trying to overclock anything at the moment.
thanks,

I had similar issues with BSOD. I thought it might be my RAM. I tried all kinds of different settings. Tested it in another system. It worked flawlessly and passed all memtests. I took that RAM and the RAM from the other system (a DELL from work) home. Tried the Dell RAM out and no post. Tried one stick in DIMM2 and it worked stably and then tried two sticks and it worked stably. I then tried my memory (ADATA). I got one BSOD, but ran several memtests and burnin tests over the next 5 or 6 hours. No more issues. SWEET. Reinstalled windows. Ran great for 4 or 5 days and then got more BSOD. I contacted MSI support and on two separate occasions they suggested I RMA the board. I returned the board and got a different one. I've been happy since (no issues whatsoever). I even bought two more sticks of RAM. I'm just saying - maybe it's not your RAM. I can't say for certain that the 890FXA-GD70 was defective. It may just need more BIOS updates. Frustrating to say the least. I feel your pain.
AMD 1055t
MSI 890FXA-GD70 - flashed BIOS to 1.6 early on to try to fix RAM issues (didn't help) = RMA
ASUS M4A89TD PRO
ADATA 4x2gb DDR3 1600
Nvidia GTS 250 on loan from a friend until I select a card
Antec True Power 750w
WD caviar Black 750
Lancool PC-K62
Zalman CNPS10X Performa

Similar Messages

890FXA-GD70 - what bios settings for RAM

I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx

Quote from: camphill on 19-April-11, 06:16:34
I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx
Need more information pertaining to the issue at hand, does the PC have problems booting or stability issues or does it run no problems at all?
From whats in your sig it seems you have some OCZ unless that is incorrect? What is the issue at hand?
For dual channel, put the two sticks of ram into color matched DIMM's closest to the CPU, 1&2 for AMD boards as far as I know.

Problems with Installing 4GB RAM on mid 2007 iMac

I ordered 2 X 2GB sticks of PC2-5300 DDR2 SODIMM RAM for my Boss's mid 2007 iMac from Crucial.com. Well they arrived a few days later and today I have been trying to install them for a few hours now without any luck. I have installed new RAM about 5-6 times without any problems before on different MacBooks and iMacs. After this install I plugged back into the wall and hit the power button, the iMac made a little noise (internal noise) then nothing, just a blank screen. I thought maybe the RAM was bad so I inserted 2 other chips (we ordered 4 X 2GB to upgrade 2 iMacs) and still no luck. After making sure the iMac would boot with the old RAM (which it did), I tried installing 1 X 1GB with 1 X 2GB and it booted up perfectly. I did this with all four 2 GB RAM chips to make sure they all worked and they did. Each time I successfully booted, I went to the system profiler to make sure it recognized 3GB of RAM and it did. So my question is why is this mid 2007 Aluminum iMac not working with 4GB of RAM, but it works perfectly with 3GB? Thanks in advance, sorry for the long question.

+It seems to me that it is not just a problem with the RAM but with the imacs themselves.+
How does this make any sense when one considers that Apple successfully specified, produced, sold and delivered all three iMac (mid 2007) models with an optional 4GB of RAM pre-installed?
In addition, Apple has, without issue, sold large quantities of that same RAM online and over-the-counter for customer upgrades. Much of all that 2GB, and the latest 4GB RAM, as usual, has been manufactured by Micron, the publicly owned U.S. manufacturing company parent of the Crucial direct sales division. The same type of RAM was also being provided to Apple by other manufacturers.
I received my two orders of upgrade RAM from Micron/Crucial even before I had purchased my 24-inch iMac, and it's worked great ever since I installed it. I also installed the second half of that order into my current MacBook, purchased a month after the iMac, and it's also been working great ever since. These are certainly superior Apple products.
Obviously there has been a change in RAM manufacturing design at Micron, probably due to their change-over to the costly, challenging high-tech 50nm and 40nm manufacturing technologies, and it is nothing more than Micron's problem.
Message was edited by: myhighway

My new iMac mid 2010 i7 and the problems with 16 G ram. A summary .

This is a summary of my findings with 16 G OWC ram. The story and details in my first thread on this issue:
http://discussions.apple.com/thread.jspa?threadID=2560826&tstart=75
In the past 20 days I have tried- out/tested the OWC rams in pairs of two (8G) in my iMac. No problems at all.
Last thursday I put all the 4 OWC rams (16G)into my iMac and now after about 7 hours I had the sudden shutdowns again.
Based on my own experience with the OWC ram and reading thru the many threads on the Apple Support forum written about this problem I come to the conclusion that by itself the OWC ram is ok. But when put together in a kit of 16 G ram it is causing the so called sudden shutdowns in the new mid 2010 iMac i5/i7. And this seems to be the case with most 3rd party ram. (OWC, Crucial, Strontium, etc)
Also it appears, judging from some threads/posts , that people who have the original 16 G Apple ram do not have these problems.
I have informed or will do so shortly both Apple and OWC about it.
peterwillem

Hi I've went down to 14GB 12 of OWC's NuRam & 1-2GB stick of the original ram supplied by Apple. So far no random shut downs however I did have one lockup which forced me to hold the power button down to shut it down. The system rebooted normally but the display was asleep when it was frozen and even the old 3 finger salute wouldn't phase it.
The only other strange behavior was an odd message telling me that my "Your Mac start up disc has no more space available for application memory."
A 3rd party program SnowTape was running but wasn't responding and the other open applications were Mail, Safari and Finder. I only opened Little Snapper to capture the message afterwards along with the info from iStat.
Here's what I captured from the iStat drop down:
Wired 674MB
Active 8.87GB
Inactive 4.38GB
Free 79MB
Page ins: 78,895
Page outs: 5,169.368
Swap: 59.00 GB
Snow tape 12.07 GB(!!)
Windows Server 110MB
Mail 80MB
Helper 55MB
mds 48MB
I'm curious if it's possible that my migration from a 32 bit Intel iMac w/a Core Duo could have anything to do with it since I used XSlimmer quite a bit to trim the PPC code and some Intel 64 bit long before I purchased my new Core i7 iMac? Another reason I brought that up is an unrelated topic on BluRay ripping
Message was edited by: Uncle Mac OSX

Problem with 2gb Corsair ram on MSI Diamond plus mobo

Ok first of all,the specs:
AMD Athlon 64 X2 4200+ "Manchester"
MSI MS-7100 K8N Diamond Plus, nVidia nForce4 SLI
MSI GeForce NX7900GTX-T2D512E
2048 MB DDR-RAM, 400MHz - (TWINX1024-3200C2PRO) Corsair TwinX CL2
( 4 pieces at 512mb ram)
Plextor PX-755SA/T3K DualLayer / 16x DVD+/-RW
HDD: Maxtor DiamondMax 10 (6V200E0) 200 GB SerialATA-II / 7200rpm
running on win xp prof. sp2
with newest version of mobo bios and drivers.
The thing is, if i stick all the for ram pieces into the pc, it tends to crash down after a while or during the booting with PAGE_FAULT_IN_NONPAGED_AREA as error msg.
but if i take two pieces out and run all with 1 gb no problems occour. This is starting to really annoy me, so i'm hoping someone has the know how to help me out, i'd really appriciate any suggestions or or solutions, i just want to run my system with 2gb of ram

run memtest on the system and tell us if you get any errors. it is probably a bad configuration of the memory timings and voltages. try to get the timings and voltages from the manufacturer's web page and then set up manually in bios.

Problems with newly installed RAM

Please help!
At first, my IMac 2008 wouldn't start... It was showing grey screen and beeping 3 times in a row. So I ordered new RAMs (4 GB matching pair) instead of my old 1 GB. After 'playing' with correct positioning for (seemingly) hours nothing was happening at all. Then I put back the old memory in along with 1 new one in the other slot and the computer finally turned on. I went to check if IMac recognized the new memory and it did showing 3 GB of it instead of the 1 GB I originally had. Anyway, it convinced me that the problem is not in the new RAMs I purchased. To make the long story short: my IMac worked for about 15 min. and froze again. I had to turn it off manually. After that I was back to square one. When I put old memory in - I get grey screen with 3 beeps. When I put either one or both new RAMs in - nothing happens. It was my first time swapping the RAMs so I have no idea what I'm doing wrong or if it's me at all. I'd appreciate any help anybody could provide. Thanks in advance!!!

Hi artnsus, I will make this simple for you. I bought 16 gigs of ram from OWC. One stick went bad in a matter of a few days. The grey screen and 3 dong sounds is a a bad stick. The other guy is right, Apple computers are very picky about their ram. I ended up with a kernel panic as well. That's was real fun! Let me say that again. That was not fun! So, here is exactly what OWC emailed me and said I should do after I install ram in my Mac,
Gently clean the memory contacts with a soft pencil eraser and make sure you seat them properly into the slots.
Resetting PRAM and NVRAM (should be done any time you alter the ram configuration)
1. Shut down the computer (should already be off from install)
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until you hear the startup sound ("bong") for the third time.
6. Release the keys.
Let me say this, nowhere in Apple's Instuctions of adding or replacing ram does it say anything like this needs to be done! I don't really get this and to be honest I don't trust buying ram from OWC. Oh, let me also say this. OWC also said that my iMac could take up to 32 gigs of ram while Apple specifies only 16. They say they do testing but they failed my test and honestly I don't see myself doing much business with them again. That's not to say they are to a good company, I just don't think I want to by ram from them again.

Problems with installing new RAM on P45C Neo-FIR

I have an MSI "P45C Neo-FIR" motherboard with 4GB (2x2GB) DDR2 800Mhz ram.
In order to upgrade my computer I bought 2 sticks of 4GB DDR3-10600 (KVR13N9S8/4) but when I install them my computer won't boot, it beeps 3 times and then shuts itself down.
I tried updating the BIOS version but it still doesn't work...
What could be the problem? I'm pretty sure this memory is compatible with my motherboard...

Quote from: vitalgrados on 01-May-13, 15:55:14
In order to upgrade my computer I bought 2 sticks of 4GB DDR3-10600 (KVR13N9S8/4) but when I install them my computer won't boot, it beeps 3 times and then shuts itself down.
I'm pretty sure this memory is compatible with my motherboard...
I'm not so sure about that compatibility.
http://ark.intel.com/products/35133/Intel-82P45-Memory-Controller-Hub
The P45 chipset is limited to DDR2-800 or DDR3-1066
With a voltage bump it also works (more or less stable) with DDR2-1066 and DDR3-1333
But DDR3-1333 is not an option in case of 2 x 4GB.
You need DDR3-1066 modules if you want 8GB RAM on P45.

Memory Problems with Photoshop CS2 - RAM not being utlized

I am having memory issues with Photoshop CS2. I have a G5 dual 2.5 with 8 GB of RAM. PS CS2 keeps hanging on me when I'm doing fairly routine tasks with a fairly complex low-res .psd file. It includes several nested layers...etc.
I noticed while running activity monitor that Photoshop is utilizing a very small percentage of my system's RAM. Approximately 475 MB of the total 8 GB RAM and 1.07 GB of harddrive space for the scratch disk. This seems odd as there is over 6 GB of free RAM while this is happening.
I've uploaded a screen capture of my activity monitor while Photoshop is hanging. Note that the CPU percentage is above 98%. That's an awful lot of RAM going unused.
http://www.tramad.com/Memory.png
Any idea what's going on here? Could it be a corrupt file or font?

Doesn't completely make sense as I've been using this particular machine for almost two years without any problems working in much more complex and much larger high-res .psd files. I doubt that's what the issue is here. I'm starting to think the file became corrupted...
Hard to believe that Adobe/Apple haven't issued a fix for the RAM issue yet.
I also run routine CRON maintenance using Cocktail and have no other issues with any software....

Does Mountain Lion checks for original hardware?? (problem with third-party ram)

Hi all,
I am wondering if Mountain Lion does a hardware check for original hardware. I did a RAM upgrade 6 months ago (from 2x2Gb to 2x4Gb Dolphin 1333Mhz DDR3 on a an early 2011 MacBook Pro) and everything went smooth, I really noticed the upgraded performance.
My problem started after a firmware update (I was running Mountain Leopard). The system became really unstable, with a lot of programs crashing randomly and some crash black screens. I then decided to update to Mountain Lion with a fresh install to solve all the problems and clean up my computer.
I did it from a bootable USB drive using Lion Disk Maker and following these instructions with the harddrive completely formatted: How To Make A Bootable Disk Or USB Drive Of OS X Mountain Lion. The installation got stuck half way through and exited without any error message. After checking the log I got an error code (FAILED TO VERIFY ESSENTIALS PACKAGE). After diggin for a couple of days I found out in an old apple support discussion (Failed To Verify Essentials Package On Installation) that the problem could be the non-original RAM. I then replaced the RAM with the original one and finally was able to install the new OS without problems.
After the OS install and setting up my usual programs, I decided to go back to the upgraded RAM for extra performance and the crashes came back as before. So the newer RAM clearly caused the system to become unstable. So right now I am using the original RAM, I want to get extra RAM but not sure if it was a sporadic problem or it will happen with all the third party memories. Going to the official tecnical service will cost me more than 130€ while buying a third party RAM is around 40€. Is it really Apple pushing us to get original parts or I am just unlucky? Did someone else experienced something similar?

Well, the upgraded RAM worked properly for 5 months straight. I don´t think it is a problem of dirt on the contacts or improper seating. Having the RAM not working properly the same day I want to update the OS, without touching it would be too much of a coincidence I think.
I am going to try the third party RAM again to be sure, trying to clean the contacts just in case, I will post the outcome later.

Hello my Power Macintosh G5 2.7 DP (PCI-X) flashes and tell me theres a problem with the installed Ram! some times it powers on with no problems but now its saying there a ram fauilt and dont boot! any help here please thanks

hello i have a powermac G5 it flashed lights tells me it has a Ram fault but some times it pwers on with no problems odd any one give me advice on this ? thanks

Hi, while it could be the RAM, it seems more likely a RAM slot solder problem related to temperature.
Does it do that when it's colder?
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047

Problem with 3rd party RAM for Thinkpad T400

Hey everyone,
I just installed 1GB Hynix RAM (came from my macbook pro) onto my Thinkpad T400. At first, it booted up fine. I did all the memory tests and everything. No problems found.
However, every once in a while, when I reboot my laptop, the bios beeps once, three times, once, then three times. I looked up the beep codes and called customer service and it has to do with the memory.
Sometimes when I press the power button, the laptop turns on but the screen doesn't. I just have to force it to shut down then restart...then it's fine.
Any suggestions? (besides buying overpriced lenovo branded RAM)
Thanks in advance.

gatorman1122,
umm, i think we've already established that it's DDR3. it's absolutely impossible to make DDR2 modules work in your system even if you removed the check pin from the socket. and, even if you did get it to fit, your system wouldn't even POST. the pins are different in both quantity and mapping.
what hasn't been established, however, are the exact specs (not the type) of the module installed. what speed is the module? what's the part number? is it an original apple module or an aftermarket? again, more info is needed on what you installed.
also, what beep code are you getting? is it the beep code for memory or for something else? you can check codes in the T400 HMM if you haven't already.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Problems with Stickies

I keep a lot of important notes in my Stickies and since I did the 10.5.1 update I'm getting the following message when I try to open Stickies, "You cannot use the application "Stickies" with this version of Max OSX " I would really appreciate any help anyone could give me on this. Thanks

I had the same issue when trying to launch Stickies from the Dock and realized what the problem is. The original version of Stickies (5.1.0) is still in your Dock. When you upgrade to Leopard 10.5.1, it adds a newer version of Stickies (6.0). Open Applications and scroll to Stickies where you should see both versions. Drag 6.0 down to your Dock and remove 5.1.0. Poof!! Problem solved!!

P35 Neo2-FR: Problems with 1066 MHz RAM speeds

I have the following PC components:
Intel Core 2 Duo E6750
MSI P35 Neo2-FR LGA 775 Intel P35 ATX Intel Motherboard
OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)
In order to get the memory to run at 1066 MHz, I need to set the FSB／Memory Ratio to 1:1.6 correct? When I do that, it shows it running at 1066 MHz but after doing that, I got a BSOD IRQL_NOT_LESS_OR_EQUAL five minutes into a game. I then changed that ratio to 1:1.2 so it runs at 800 MHz and I played for several hours after that without any problems.
That memory should be capable of running at that ratio correct? Possibly defective RAM? OCZ provides a utility to update the SPDs on their chips and when trying to update the one in the first slot, it gives several messages, something like "expected FF got 00," and will not update. The second DIMM updates fine. I am using manual settings for the memory in the BIOS and not the SPD but I'm wondering if the SPD update errors are indicative of a bigger problem.

Quote
Does the memory voltage also need to increase when changing this?
It depends on the modules you are using. In most cases the answer is "YES".
Look for the specific part number of your modules and check on the OCZ Produkt Page to find out what DRAM Voltage is recommended for 1066 MHz.
http://www.ocztechnology.com/
EXAMPLE:
For OCZ DDR2 PC2-8500 SLI-Ready Edition (OCZ2N1066SR1G) OCZ recommends 2.3 Volts. BIOS Standard is usually 1.8-1.9V.
http://www.ocztechnology.com/products/memory/ocz_ddr2_pc2_8500_sli_ready_edition
Quote
n order to run 1066 MHz, I need to set it at 1:1.6
Yes:
333 MHz x 1.6 ~ 533 MHz (~1066 MHz DDR2)

I have problems with 2010 dodge ram and uconnect any help?

I have a 2010 dodge ram and also a Iphone 4 I love both , but The uconnect and iphone aren't working good...can yall PLEASE HELP!!!!!!!!!

In the Following link you will be able to read the online phone Compatibility Test Results for uconnect, just click on the link and a PDF file will open in your browser:
https://www.chrysler.com/hostb/crossbrand/owners/en/pdf/download/BT_phone_Compat ibility_Test_Results_Final_Draft_REV_C.pdf
also try the next link to the Official Chrysler UConnect Bluetooth and iPhone Compatibility Discussion:
http://www.everythingicafe.com/forum/bluetooth/official-chrysler-uconnect-blueto oth-and-iphone-compatibility-discussion-3092.html
Also remember that all handsfree bluetooth devices have a limit of how many phones you can pair with it, check how many phones you already had paired with your uconnect unit, try deleting the ones you do not use anymore.

Problems with KVR13S9S8/4 RAM cards

Hello!
I just bought two memory cards Kingston ram model KVR13S9S8 / 4.
Currently I have 4GB of Ram and just bought two 4GB cards.
When installing my Mid 2010 iMac 21.5 does not work properly. Fails to start. O shows me a Kernel Panic message.
This model is right for my computer?
Kingston specifications match Apple.
You should change these cards for another Kingston's model?
Hope you can help.
Thank you!
Adrian

Ho, ****! I bought this RAM http://www.kingstonmemorycards.co.uk/ram-memory-modules/kingston-16gb-1333mhz-ra m-memory-upgrade-kit-for-apple-imac-core-i3-3-06ghz-21-5-inch-mid-2010-kit-of-4- 4gb
Thank you for your help!

890FXA-GD70 problems with 4 stick of ram

Similar Messages

Maybe you are looking for