890GXM-G65 - Windows 7 Install ERROR

It gets to the point where I select the partition to nstall on, and I receiv this error:
"Windows could not format a partition on Disk 0. Te error occured while preparing the partition selected for installation. Error code: 0x80070057
I have MSI 890GXM-G65
AMD Phenom II X4 955 BE
2x2Gb Giel DDR3 1333
WD !Tb Caviar Black Sata 6Gb/s HD
Pioneer 218BLBK DVD writer
IS there a jumper or something I am missing on the Hard drive? I didn't see any.
Is their a non-raid Sata driver I need to load?

Is this 32bit or 64bit Windows 7?
Is the SATA controller set to IDE, AHCI or RAID in BIOS?
If set to AHCI/RAID, you need to click on 'Load Driver' at the disk selection screen, and load the relevant ATI SB RAID driver from here:
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2012

Similar Messages

890GXM-G65 - How to install SB850 drivers in Win7

I purchased the 890GXM-G65 mobo. I want to install the sata controller (southbridge chipset) drivers from AMD. I basically want to get maximum performance from my sata controller. I tried AMD drivers but had problems with installation. Also, do I need the drivers and application. Is better to use the default windows based AHCI driver or the AMD AHCI driver? Thanks
Windows7 Home Premium
2G byte Memory
AMD Phenom II X4 810
OCZ vertex (30Gbyte SSD)
KJ

I downloaded the AMD drivers: catalyst, ahci and SB. The SB drivers installation work halfway, and then they crash. I get a driver fail on installation. Not sure why. The sata controller device is correct AMD SATA Controller. I guess I need to see detailed instructions to make sure that I am doing this correct. Maybe safe mode. Any suggestions?! Thanks in advance.

890GXM-G65 windows 7 Setup - Reboot Loop

This is wierd.
I have:
MSI 890GXM-G65
AMD Phenom II 955BE
Geil 2x2Gb DDR3 1333 (Model GV34GB1333C7DC)
Pioneer DVR-218BLBK
WD Caviar Black 1TB Sata 6.0Gb/s HD
New self-build. Everything is installed, Bios reset, Bios configured (ver1.6). Auto Settings, no overclocking.
I try to install Windows 7 x86 from DVD or USB. It goes through the first Black and White window extracting files, then it proceeds to the first 'Starting Windows' and reboots. Tried Safe mode, and it fails on DISK.sys and reboots everytime.
I have checked all settings in the bios, tried disabling C&Q, disconnected the DVD and tried from just USB. Replaced Sata cables, tried different Sata ports. Tried with 1 DDR3 module. Same result.
I did a google and found some people had issues with their PSU, they replced it and resolved the issue, however my PSU is a cheapo 500w, not the same as mentioned by other people.
Anyone have a solution for reboots caused by DISK.SYS during install?

There is no such board [890GXM-GD65]
Do memory check with >>Memtest86<<

Windows 7 install error 0x80300024

Mac Pro with 4 internal hard drives. My primary startup drive (in bay #1) has 10.5 on it.
Wanted to install Windows 7, so needed Snow Leopard's Bootcamp to do that. The fourth hard drive in the machine was new, so wiped that, installed Snow Leopard, then used Boot Camp Assistant to add a partition to that drive for Windows.
Started the Windows 7 install (32 bit). Got to the screen where you choose which volume it will be installing onto, and selected the "BOOTCAMP..." labeled one. Pressed the Next button, which is where I encountered the 0x80300024 error.
That is, it said something like "Windows cannot be installed onto this drive. Error 0x80300024."
Found some posts here on the Apple forums, from The Hatter, advocating removing all the other hard drives when trying a Bootcamp install. The jist of it was, remove all other OS X system drives, or Windows gets confused about its install location. And, while you're at it, might as well pull ALL your other drives before the install for safety (so in my case, that meant the 10.5 system drive from bay #1, plus data drives from bays 2 and 3).
So I did that, re-ran the Boot Camp Assistant in Snow Leopard, having it start with the install. Now the Windows 7 install is going forward.
THANK YOU to THE HATTER!
It is a shame that nowhere on their support pages does Apple acknowledge install error 0x80300024. They really ought to add that to their Knowledge Base page on Boot Camp/Windows 7. That page is here: http://support.apple.com/kb/HT3986

Also, note that I would have added my comments to one of the threads where The Hatter had given his advice, but they are old enough to be closed for new comments.
Besides, it seems like a good idea to have a thread with the error code (0x80300024) in the subject line.

CS6 Acrobat Pro Windows 7 Install Error

I tried several times to install cs6 and always get an error, I have not been able to install it, can you please help me?
Thanks
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
System Requirements

Hello Abhijit, thanks for the help
I'm doing the installation from my hard drive with the download of CS6 everything installed ok but Acrobat Pro didn't
I already tried what you recommended but didn´t work
Any other suggestion?
Thanks, regards

Windows 7 Install Error

I have received error code x80070017 during the installation of Windows 7 RC. This has occurred twice -- once while attempting to install into the fourth partition on my local HD, and the second time attempting to install to the third partition (lower cylinder position). No other explanation is provided.
A search of MSDN for the error code also failed.
HD partition map is:
Partition # Size Usage
1              60 GB WinXP
2              75 GB Vista
3              90 GB Windows 7
4              90 GB Data
Does anyone have any knowledge on this error to share?
Thanks, Jim

Hi,
I am getting CRC check failed error while installing Win XP with SP3..
In my case, I am downloading the ISO file on one computer and then transferring the whole ISO file in a portable storage device.
Then, I take that portable device to my home and copy the ISO file from there into my home computer to burn it to a CD-RW
Can the usage of two different computers, one for downloading the file and another for burning the file, could be the reason for this
Thanks,
Manik

Windows 7 Install error after Recovery

I recently had a HD crash on my SL410. I received a new hard drive and recovery disks from support. All appear to install OK until Windows 7 tries to start. I get to "Setting up for first use " and then get an error message that says the install did not work correctly and I need to start over. Requested new disks from support but had the same error. Any ideas on what is wrong?

performing clean windows installation may solve your issue.
also, when you see lenovo logo, press f8 , then select "las good configuration" or "fix start-up issue" from the menu.

Another Windows 7 Install Error

Here's what I've got:
Bootcamp 5.0
Mac Mini w/ 2 500gb drives
Mountain Lion, and Lion Server
Windows 7, Home Premium
Last night I went through maybe 10 progressive attempts at an install of Windows 7. First the screen went dark, I found solutions to that, so I was eventually able to get the Windows install to start. When I get to where I select the partition, I pick the bootcamp one, and format it. I know it formats to NTFS because when I reboot to OSX I can see it's NTFS.
The problem is, that I can't go beyond this point. I get an error that I can't install on that drive... (I'm at work, and I don't have the exact error text, but if it's necessary I can pull it up tonight). Has anyone ever had an error at this point? What have you done to fix it?
Thank you!!

Remove the second drive while installing. Read the Boot Camp Help files http://www.apple.com/support/bootcamp/.

HP ENVY dv6-7323cl Notebook PC Windows 10 install error (0xC1900101 - 0x20017)

The full error is: "The installation failed in the SAFE_OS phase with an error during BOOT operation. (0xC1900101 - 0x20017)" Curious if anyone was able to get their Envy dv6 upgraded from Win8.1 I have literally tried over 10 sulutions found on the web - Most of the solutions seem to come down to manufacturers updating BIOS. I know there was an update for the BIOS of this machine on 10/31/14 for ver. F25 and it has been installed, but if anyone has any ideas for this particular machine that has worked - Please share Thanks Edit* Things I have tried - Clean boot - Uninstalling AV - ISO from USB for Win10 - Windows Update to Win10 - Disabling Video,Sound, Biometrics - I am sure I am leaving a few out, but this gives an idea..

Hello
I was unable to find the drivers searching with your product and model number as well.
I was able to keep searching and found this link and it was under our business site support. This is the drivers for your unit series and you should be able to download the fingerprint reader drivers from the link.
Let me know if this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error installing windows 7 on 890gxm-g65 & phenom x6 1055T

hi, i've got a big issue, i've bought a new pc to assembly by myself but i'can't install any OS
my config is :
890gxm-G65 (ms 7642v1.00)
amd x6 1055t
2x2go ddr 3 kingston 1333mhz(9-9-9-24)
SSD corsair force60 go
HDD western digital 1to caviar green
sapphire radeon 5770 vapor-X
ocz modular psu 500W
i can't install any os i tried to ( Seven ultimate 32 and 64 bit, XP home sp3)
after the very first step of the install ( black screen with "Windows is loading files" on below), it freezed or a blue screen appeared with the error message ***STOP 0x000000000; 0x30000000; 0x50000 etc.
all my boot cd are well burnt (tested on another pc) i've tested the ram, the ssd, the hdd and the reader separately and everything work fine another pc.
my processor is not recognized by the bios, but i'didn't managed to flash the bios with M-flash.
If some could advice me, it would be great!!

Try physically inspecting the processor for any missing or bent pins. If you're going to flash the BIOS, make sure to do it with the forum's USB flashing tool. It has a 100% success rate and everybody that has used it (including myself) swear by it.
https://forum-en.msi.com/index.php?topic=108079.0

Only 12 GB RAM showing in BIOS of 890GXM-G65 when 16 GB RAM is installed

Just added 2 x 4 GM RAM of the identical type as the original 2 x 4 GB to my son's PC, motherboard 890GXM-G65.
Even after a BIOS flash to the latest version, the BIOS still only recognizes 12 GB RAM but Windows 8 confirms 16 GB is installed, with only 12 GB available.
Anyone have any suggestions on this one, to unlock/enable the additional RAM? Tried many things to no avail.

can be dead ram or dead slot or may be corrosion or dirty slot connector, try to find contact cleaner in electronic store to clean the slot ( without power of course )

G710 Windows 7 Pro x64 Bluetooth + Wireless driver install errors (can't install)

Hi all,
I've recently just purchased the G710 i3 model as a birthday gift for my dad. It originally came with Windows 8 installed but my father prefers Windows 7 so I've installed this on a SSD (replacing the 1TB drive).
After updating Windows 7 Professional x64 with updates via ethernet I started to install all the drivers in the following order:
note: downloaded x64 drivers (for obvious reasons)
chipset
graphics (intel hd4600 first followed by nvidia gt 720m)
NIC LAN
Audio
Bluetooth and Wireless (won't work - see below for errors)
Touchpad
Card Reader
Webcam
Intel Management Engine (ME)
Intel Rapid Storage Technology Driver (RST)
BatteryCare (replacing the Lenovo Energy Management)
I've downloaded all from the Lenovo web site except up to date Chipset, ME and RST from Intel.
All drivers except for the Bluetooth and Wireless have installed fine. All Fn keys work except for the "Airplane Mode" (guessing due to the driver not being installed).
These are the following errors I get:
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error01.png~original
after clicking on OK ... I get the following
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error02.png~original
after clicking on OK ... there is another message displayed in the CMD window directly underneath the 1st one which is exactly the same text. Both windows then immediately close.
I tried the 32 bit version of the driver and got exactly the same result.
Can this be fixed so it can work? I'm hoping it's not just me.
Thanks for any help in advance, Pete

hi pete_agreatguy,
Welcome to Lenovo Community Forums!
The extraction maybe looking at a missing folder.
When you downloaded the driver
WLAN and Bluetooth Driver (Intel, Broadcom, Qualcomm) for 64-bit Windows
When you doubleclick it it should pop up a winodw where you hit next , agree then it shows a page where you can see a box with a browse button. can you share if you are getting that?
like this:
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

890GXM-G65 - Windows 7 Install ERROR

Similar Messages

Maybe you are looking for