892 Integrated Services WAN Failover
Hi everyone,
I have a client with a Cisco 892 Integrated Services router, and two ISP lines. He would like to implement automatic failover in-case the primary ISP goes down. I lack familiarity with integrated services routers, but will a static default route to the secondary ISP, with a high administrative distance do the trick? It seems to work in packet tracer, but I'm just looking for a second opinion before deploying it in the real world.
Thanks for any feedback.
services aggregation offerings for WAN and MAN that combine with integrated services routers to offer secure, wire-speed delivery of concurrent data, voice, and video services
Similar Messages
-
We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
Our job we have running on the cluster is failing with the following error:
Error: 2014-01-31 09:14:37.52 Code: 0xC000F427 Source: SCR - DP1 Connections
Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher. End Error
Any advice or information on how to resolve this would be great.
Many Thanks.Hi NessaBella,
Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
in the cluster.
Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
References:
Integration Services (SSIS) in a Cluster
Loading and Running a Remote Package Programmatically
Regards,
Mike Yin
TechNet Community Support -
Integrations services error 4000 - integration services does not match the expected version
I have a 2 node high availability cluster built on 2012r2 DataCentre. One VM continually fails to backup and gives the event log error
"Hyper-V Volume Shadow Copy Requestor failed to connect to virtual machine 'QuadPro' because the version does not match the version expected by Hyper-V (Virtual machine ID 094B6B22-BBED-4D0B-8E47-D8D4D0D3F986). Framework version: Negotiated (0.0) -
Expected (3.0); Message version: Negotiated (0.0) - Expected (5.0). To fix this problem, you must upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu."
When I do the suggested action I get a message stating
"The computer is already running the current version of integration services (version 6.3.9600.16384)".
This VM was built through the failover management console under 2012r2. The VM in question is a 2008r2 standard server running a single database application.
Please advise.
MattHi,
I have run the command using both nodes and get the following error:
PS C:\Users\*******> Get-VMIntegrationService -ComputerName node01 -VMName quadpro
Get-VMIntegrationService : A parameter is invalid. Hyper-V was unable to find a virtual machine with name quadpro.
At line:1 char:1
+ Get-VMIntegrationService -ComputerName node01 -VMName quadpro
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (quadpro:String) [Get-VMIntegrationService], VirtualizationInvalidArgum
entException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMIntegrationServiceCommand
However I tried one of the other VMs for testing purposes (and to check syntax etc) and got the following success message.
PS C:\Users\******> Get-VMIntegrationService -ComputerName node02 -VMName appserver01
VMName Name Enabled PrimaryStatusDescription SecondaryStatusDescription
Appserver01 Time Synchronization True OK
Appserver01 Heartbeat True OK
OK
Appserver01 Key-Value Pair Exchange True OK
Appserver01 Shutdown True OK
Appserver01 VSS True OK
Appserver01 Guest Service Interface False OK -
Hi
I have a asa5505 with sec plus license and have configured this for wan failover, when the primary isp link goes down the route changes to the backup and all is fine, but when the primary comes back on line the route stays at the backup ?. I have tried all the debugging on sla monitor, but to be honest not a lot is reported.
I am fairly new to the cisco stuff, but this doesnt seem right to me ?
Device is running asa803-6-k8.bin, primary isp is through external router, backup isp is on pppoe.
The only way is to drop the backup connection and it reverts back to the primary okRunning config, IP address have been changed etc
ASA Version 8.0(3)6
hostname ciscoasa
domain-name
enable password xxxxxxxxx encrypted
passwd xxxxxxx encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 232.26.201.21 255.255.255.248
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 10.0.0.55 255.255.255.0
interface Vlan22
nameif ISP_Backup
security-level 0
pppoe client vpdn group ISP_Backup
pppoe client route distance 254
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
switchport access vlan 22
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 12
ftp mode passive
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup outside
dns server-group DefaultDNS
name-server x.x.x.x
domain-name xxxxxxx
access-list outside_access_in extended permit tcp any host 232.26.201.19 eq http
s
access-list outside_access_in remark SMTP
access-list outside_access_in extended permit tcp any host 232.26.201.19 eq smtp
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 19
2.168.2.0 255.255.255.240
access-list dmz_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.1
68.2.0 255.255.255.240
access-list skvpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list backup extended permit tcp any interface ISP_Backup eq smtp
pager lines 24
logging enable
logging monitor debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu ISP_Backup 1500
ip local pool vpnpool 192.168.2.5-192.168.2.10 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-602.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 10.0.0.60-10.0.0.90 netmask 255.0.0.0
global (ISP_Backup) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 192.168.1.0 255.255.255.0
nat (dmz) 0 access-list dmz_nat0_outbound
nat (dmz) 1 10.0.0.0 255.255.255.0
static (inside,outside) tcp 232.26.201.19 https 192.168.1.175 https netmask 255.2
55.255.255
static (inside,outside) tcp 232.26.201.19 smtp 192.168.1.175 smtp netmask 255.255
.255.255
static (inside,ISP_Backup) tcp interface smtp 192.168.1.175 smtp netmask 255.255.
255.255
access-group outside_access_in in interface outside
access-group backup in interface ISP_Backup
route outside 0.0.0.0 0.0.0.0 232.26.201.22 1 track 1
route ISP_Backup 0.0.0.0 0.0.0.0 185.72.214.36 254
timeout xlate 3:00:00
timeout conn 3:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 123
type echo protocol ipIcmpEcho 232.32.144.161 interface outside
num-packets 3
frequency 30
sla monitor schedule 123 life forever start-time now
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128
-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256
-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map outside_map interface ISP_Backup
crypto isakmp enable outside
crypto isakmp enable ISP_Backup
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
track 1 rtr 123 reachability
management-access inside
vpdn group ISP_Backup request dialout pppoe
vpdn group ISP_Backup localname xxxxxxxxxxx
vpdn group ISP_Backup ppp authentication chap
vpdn username xxxxxxxxxxxxxx password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
: end -
Difference between Services Aggregation & Integrated Services?
Hi,
I am just wondering, what is the difference between Services Aggregation Routers
and Cisco Integrated Services Routers?
Is the former specifically for WAN situations and the latter for LAN situations?services aggregation offerings for WAN and MAN that combine with integrated services routers to offer secure, wire-speed delivery of concurrent data, voice, and video services
-
SAP Business One Integration Services Authentication Failed
Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish GupteHi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte -
How can I retrieve an existing .dtsx File out on Integration Services Catalog
I have a problem with an older SSIS Package and I am trying to decipher what exactly it does. I see the Package in Microsoft SQL Server Management Studio and in our Server and under
Integration Services Catalog. It has a .dtsx extension on it.
Is there any way that I can copy this Package, this .dtsx file, and open it Microsoft Visual Studio to see what exactly it does?
There doesn't seem to be anything available when I <Right-Click> on the .dtsx Package within Microsoft SQL Server Management Studio to Save As or anything similar. This is the first time I've ever had to look at something existing in the SSIS World.
I just don't know how to get it out and reference and view it is all.
Any help is greatly appreciated and Thanks in advance for your review.Hi ITBobbyP,
Based on your description, you want to export a .dtsx package file from Integration Services Catalogs, then open it in SQL Server Data Tools.
Based on my test, we can create a project based on a project in Integration Services Catalogs, then we can look into the package in the project. For more details, please refer to the following steps:
Open SQL Server Data Tools, Click File, point to New, and click Project.
Expand Business Intelligence, and click Integration Services.
Select Integration Services Import Wizard in the middle pane, type a name for the solution, project, and specify the folder for the project, and then click OK.
In the Select Source page, select Integration Services Catalog option, specify the name of database server instance on which the catalog exists, and the path to the project in the catalog.
Click Next on the Select Source page to see the Review page.
Click Import to create a new Integration Services project based on the one you selected.
Double-click the desired package name to open the package in the project.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT Category, CntRecords
FROM [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
// TODO: Add your code here
Variables varCollection = null;
string message = string.Empty;
Dts.VariableDispenser.LockForWrite("User::Message");
Dts.VariableDispenser.LockForWrite("User::Category");
Dts.VariableDispenser.LockForWrite("User::CntRecords");
Dts.VariableDispenser.GetVariables(ref varCollection);
//Format the query result with tab delimiters
message = string.Format("{0}\t{1}\n",
varCollection["User::Category"].Value,
varCollection["User::CntRecords"].Value
varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
' Add your code here
Dim varCollection As Variables = Nothing
Dim message As String = String.Empty
Dts.VariableDispenser.LockForWrite("User::Message")
Dts.VariableDispenser.LockForWrite("User::Category")
Dts.VariableDispenser.LockForWrite("User::CntRecords")
Dts.VariableDispenser.GetVariables(varCollection)
'Format the query result with tab delimiters
message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh -
Error while running SSIS package from Integration service or via Job
Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K -
Error while running maintenace plan "Integration Services evaluation period has expired."
We are getting below mentioned error while executing SSIS package or maintenance plan.
Executed as user: ICROSSING\*****. Microsoft (R) SQL Server Execute Package Utility
Version 11.0.3381.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 3:35:00 PM Error: 2014-02-23 15:35:01.56
Code: 0xC0000033 Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Error: 2014-02-23 15:35:01.58
Code: 0xC0000033 Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Could not execute package because of error 0xC0000033.
Started: 3:35:00 PM Finished: 3:35:01 PM
Elapsed: 0.671 seconds. The command line parameters are invalid.
The step failed.
We have license BI edition of sql server 2012. Other services and database are working fine. Issue with integration service only.
Please help me sort out the issue.
Thanks,
Shitalkumar KasliwalHi Shitalkumar,
The issue may occur if Evaluation Edition or CTP Edition of SQL Server was installed earlier on the server, however, the previous instance of SQL Server was not uninstalled completely or upgraded to Business Intelligence Edition successfully. To resolve
the issue, modify the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\ConfigurationState registry key value from 1 to 3, and then rerun the Edition Upgrade procedure from the SQL Server install media to upgrade the SQL Server components to the
licensed edition again.
Reference:
http://support.microsoft.com/kb/971268
Regards,
Mike Yin
TechNet Community Support -
SSIS package not working on 2012 Integration Service Catalog deployment
I've set up a package that imports data from an excel spreadsheet(my only possible data source). I deployed it and it worked for a while and then broke. I had to switch to a generated connection string for excel with IMEX=1 to make things work.
Now it works fine on from Visual Studio on my local machine, but when I run it from Integration Services I get:
"The external column "<COLUMN NAME>" needs to be updated, for every column in the spreadsheet. I am using the same excel file on my local machine as on the other machine.
Why can't I get it to work when it's deployed to the SSIS Server?Hi,
Excel files are a bit tricky to work with. Any small change in data type, metadata can make your package fail.
I have had such experience earlier. The file contents, columns everything was same but it used to fail with same metadata issue.
Here is what helped me:
1. I tried to clear all formatting using the excel formatting options and it worked for me. But we can't ask the users to do all these things manually before uploading files to the application.
2. So, I created a new excel file and created all column headers manually. Please make sure don't copy paste from any other excel file otherwise formatting and metadata will get changed.
3. Once you have the template ready. Configure your package Excel columns according to the template.
4. Now, If you copy and paste data into this plain formatting free file, data will adapt the template settings and won't give the metadata errors.
5. We uploaded the same template on our application and users created the data in same template which resolved the issue for us.
CSVs on the other hand don't have any such issues.
Hope this helps. Good Luck! -
2008 R2 Hyper-V Integrated services error 61658...
Kind of got myself into a bad situation I think. I run a single Windows 2008 R2 Server w/SP1 that hosts 5 VM's that host two Windows Server 2003 SP2 machines and the rest are 2008 R2 Servers w/SP1. On one of the 2003 VM's I was having issues
with the mouse not being captured. I decided to reinstall the integrated services. The reinstall seemed to complete normally, but when it was done the mouse capture still did not work. So I rebooted just to check and still no mouse capture.
So I went into add remove programs and uninstalled it. I rebooted and then noticed the problems that caused. The uninstall made the VM lose the SCSI adapter and the NIC. So after getting a legacy NIC added I was able to be past that issue, but no
VHDs are accessible that were are connected to the SCSI Controller. When I try to install the Integrated Services, it gets part way through the "Updating Storport Driver" step and then throws this message: [ (X) An error
occurred: One of the update processes returned error code 61658.] This machine is our Active Directory (Domain) Controller. Again to mention, this is only machine out of the 5 that is having this problem. Any help would be greatly
appreciated.
PS: None of these are installed using Beta or RC's versions of the OS, the Hyper-V server and the VM's have all been in place for 2+ years working fine.
Thanks
Update: A friend of mine looked things over and found a vmg...log file that shows the problem is when the Integrated Services install try's to run the a KB that fails to installed: (KB943295). So I will investigate. But I did get the
server up and running again by adding a legacy network adapter and moving the two VHD files that were attached to the problem VM's SCSI controller to the VM's IDE controller. So a band-aid I know but at least I was able to get 41 users back working
after 7 hours of pulling out my hair! I do need to know I have this VM functioning 100% as it should so I'll continue to work on it.Hi SScott2010,
Please try the following setps :
1. backup the problematic VM first
2. If the VM was migrated from virtual pc , please run "msconfig " --> click the boot tab then click advanced options --> select the Detect HAL check box
3. make sure the service " cryptographic service " is running automatically.
4. restart the VM
5. Install the hotfix of kb822798 in the problematic VM :
http://support.microsoft.com/kb/822798/en-us
6. try to install the Integrated Service again.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows 2012 R2 hyper-v integration services update - error code: 50
Physical Host is a brand new Windows 2012 R2 with hyper-v role, VM is a Windows Server 2012
I try to upgrade the integration services update, VM become unresponsive and I lost connection to it, had to turn it off, afterwards it wouldn't boot.
Tried F8 on the reboot and then switched to the command prompt to manually upgrade the integration services running the setup, but got an error (Error code: 50 )
VM halts in the middle of booting up.
saying: Please wait ...
Anyone has any idea why it happened and how to fix this?Hi Seyed,
Please try to follow the link below to install integration services manually :
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to Install Integration service from hyper-v host to a virtual machine ?
i have around 100 Virtual Machine distributed on a cluster hyper-v cluster so i need to know how to install the upgraded version of integration service from the hyper-v host to all virtual machines
that has a mismatched version of the integration service using power-shell script ?See this article:
PowerShell Script
for Automated Install of Hyper-V Integration Services in a VM running on Windows Server 2012 with Hyper-V V 3.0 Role using PowerShell Remoting
Mike Crowley | MVP
My Blog --
Planet Technologies -
Improper Install of Hyper-V 2012 R2 Integration Services on 2008 R2 VMs
I have two VMs that have one or more missing/broken services after upgrading to Integration Services 6.3.9600.16384. On one VM the Hyper-V Remote Desktop Virtualization Service is missing and the Hyper-V Data Exchange Service won't start. The
other VM was missing the Hyper-V Remote Desktop Virtualization Service. I was able to create that service by restoring registry entries from another VM with working integration services and re-registering the DLLs from the driver, but the service won't
start. Both services that won't start return the error "1083: The executable program that this service is configured to run in does not implement the service". I also tried an Offline
Install of Integration Services, but that didn't fix anything. Since I am running 2008 R2, there is no uninstall available (I did modify the powershell script from the abve link to uninstall, but it didn't work). I have been un-successful in
finding a way to trick/force the installer to install again over top of itself.Hi Gregg,
Thank you for posting in Windows Server Forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
All I can find is two little > which is very hard to see. However if I click on it it does have all the titles there.
-
Hi can anybody help me please my grand daughter had changed the pass code on my ipod touch and now forgotten it is there anyway i could bring it back to the begining like when i first got it. I cant access anything and i cant sync it to itunes either
-
So I decided to give my old B&W G3/400/768 a new lease on life as a file server. I slotted in a a FirmTek 1V4 SATA card, 3 Maxtor 300GB drives and a new gigibit ethernet card. I intend to put the OS on a 4th IDE drive which I've stuck in the old flop
-
How to make J2EE engine auto load The JSP Pages
After I modify some JSP pages, If I just copy them to the folder in the Server, The pages didn't update. How to make it auto update?
-
Dear Folks, While doing STMS configuration, the SAP Server automatically configure the RFC for the server which are included in the Transport Route. Same as while adding the satellite system to SOLMAN , the SOLMAN Server automatically added the RFC a