8961 Expansion Module and Call Transfers

Hi,
Is there a way to transfer calls using the stored numbers in the expansion module on a 8961?
I touch the TRANSFER hard key and then a stored number on my expansion module but the softkey for TRANSFER doesn't pop up.
I am very new to our cisco system so please bear with me if this doesn't make much sense.
Thank you.

Hi Bret,
Yes, it there a way. Follow this instructions:
1.With a phone call established, press the Transfer hard key.
2. The New Call tab will appear
3. Press a stored number on the expansion module.
I already tested this a minute ago on CUCM 8.5 so it should work. If not, maybe you're hitting some firmware bug.
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Similar Messages

Using Attachment Interface in Module and Calling other module conditionaly

Hi Experts,
I am currently working with a module where I need to work with attachments coming with emails.
Can any one please help me , how can I use the different methods of this interface?
My requirement is to read only the content type of the attachment, taking only the content of the attachment.
we have two methods in this interface- getContentType() and getContent() , I think this will serve the purpose. we have another method toString() - will this method return the content of the attachment as a String?
in the below code fragment-
Message msg = (Message)inputModuleData.getPrincipalData();
Payload payload =msg.getDocument();
will return the main document as XMLPayload.
can I use this
Attachment attachment= msg.getDocument();
and use the method as -
String str= attachcment.toString(); ---> will this return the attachment content as String ?
any code fragment for these method in Attachment interface will be helpful.
I need another help- is it possible to call the adapter module in the next sequence from the previous module code conditionally?
e.g- I have written I custom module where I need to restrict the processing of the next module ( e,g- payloadswapbean) conditionally? like- the payloadswapbean will called only after certain verification of the attachment other wise it will not be called.
Request your help
Thanks to all
Sugata B Majumder

Hi All,
I forgot to update one thing, I am using PI 7.0 SP15, and I am interested only dealing with the the Attachment contents, what I just found that Attachment interface is not possible to use in PI 7.0 as it requires the operational mapping level check - Read Attachment.
Is there any way so that the content of attachment can only be get and the content type of the attachment?
I want to use this custom module before the payloadswapbean.
Request your help
Thanks
Sugata B Majumder

Ringing line on expansion module cuts off assistants call

Hello all,
Here is the scenario.
Director Phone is a 9971, the assistants’ phone is a 9951 with an expansion module, which has the directors Line 1 and Line 2 extensions on buttons 1 and 2 of the module. If the assistant is on her handset or bluetooth headset and a call comes in for the director on either line, and she doesn’t answer the ringing line, her call is cutoff when the unanswered line is either transferred to voicemail or the call is terminated. I have tried a number of different fixes???, but nothing has corrected this issue. Does anyone have any input that may be helpful to help me resolve this?
Thanks, Eric

I have a customer experiencing the same issue, were you ever able to solve this?
Thank you
Doug

Call an executable program inside function module and pass the table values

Hi,
       i'm pretty new to HR Abap programming. I have a requirement like "calling an executable program within a function module and the output of the program data(Stored in internal tables) should be passed to the function module tables".
I've some idea about SUBMIT keyword and i used it in the function module..
Please do the needful to solve this.
Regards,
Selvi.

Hi,
Thanks for all your reply.
I've used Option 3 as per dsouzajovito suggestion. Now i'm getting data in function module tables using import/ export table to memory concept.
Again a small issue arises, while i'm executing function module it fetches all pernr available in the server and displays the details of last pernr. GET pernr statement is used in the Z report and submit statement is used like this as follows.
SUBMIT ZHR_RFC_PAYSLIP   WITH PERNR-PERNR EQ EMPCODE
                                      WITH PYBEGDA EQ FDATE
                                      WITH PYENDDA EQ LDATE
                                      AND RETURN.
Pls suggest if there is any corrections in the code.
If i give a pernr as input in the function module, then it should fetch the details related only to that pernr.
FYI, No selection screen is used here as per requirement.
Regards,
Selvi.

How to create RFC function module and how to call this function module

Hi,
i want to know step for creating RFC function module and then How to use this function module from some other sap system.
Thnaks,
jigar

Jigar,
To implement a remote function module in ABAP, perform the following steps:
Register the module as remotely callable in the RFC server system.
In the function module Administration screen (transaction code SE37), set the field Can be called via REMOTE CALL. Registering a module as remote causes an RFC stub to be generated for it.
Write the code for the function module.
Create the destinations.....................
Displaying, Maintaining and Testing Destinations
To display, create or modify destinations, choose Tools ® Administration ® Administration ® Network ® RFC destinations or enter transaction code SM59.
Remote Destinations are stored in table RFCDES. The RFCDES table describes logical destinations for remote function calls.
It is not possible to maintain the RFCDES table directly.
You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® AcceleratedSAP ® Customizing ® Execute Project ® SAP Reference IMG.
In the Implementation Guide, expand the following hierarchy structure:
Basis
Application Link Enabling (ALE)
Sending and Receiving Systems
Systems in Network
Define Target Systems for RFC Calls
Displaying Destinations
The initial screen for this transaction displays a tree:
Different connection types (i.e. partner systems or programs) are possible. For further information, see Types of Destinations.
To display all information for a given destination, double-click it, or place the cursor on it and press F2 .
To search for a destination, press the Find button and specify your selection. You get a list of all entries matching your selection. Place the cursor on the one you want, and press F2 or simply double-click the destination. All information for the given entry appears.
Creating Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
All available connection types are explained in Types of Destinations.
To create a new RFC destination, press the Create button. A new screen is displayed with empty fields for you to fill in.
If you want to create a new destination
As you create a remote destination, you can specify a particular application server or a group of servers for a balanced distribution of system load.
For details of the destination parameters, see Entering Destination Parameters.
Changing Existing Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
You can display all information for a given destination by double-clicking it or pressing F2 on it.
To change an existing destination, double-click it, or place the cursor on it and press the Change button.
For details of the destination parameters, see Entering Destination Parameters.
Testing Destinations
To test a destination, choose the appropriate function from the Test menu.
Connection (also available via the Test connection pushbutton)
Authorization (checks logon data)
Local network (provides a list of application servers)
You can use the CALL FUNCTION statement to call remote functions, just as you would call local function modules. However, you must include an additional DESTINATION clause to define where the function should run:
CALL FUNCTION RemoteFunction
DESTINATION Dest
EXPORTING
f1 =...
f2 =...
IMPORTING
f3 =...
TABLES
t1 =...
EXCEPTIONS......
The field Dest can be either a literal or a variable: its value is a logical destination (for example, "hw1071_53") known to the local SAP System. Logical destinations are defined in the RFCDES table (or the TRFCD table in R/2 Systems) via transaction sm59 or the following menu path: Tools ® Administration, Administration ® Network ® RFC destinations. You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® Customizing ® Enterprise IMG. In the Implementation Guide, you can then choose Cross-application components ® ALE ® Communication ® Define RFC destination.
The remote function call concept, for example, allows you to access a function module in an R/2 System from an ABAP program in an R/3 System. If you want to read a customer record from your R/2 Systems database, create a remotely callable function module in the R/2 environment which retrieves customer records. Call this function from your R/3 System using a remote function call and listing the destination for the target R/2 System:
Pls. reward if useful

I cant get my ipad to play movies AVI i have downloaded an App called PlayerX, and it transfers the movies over to the ipad but doesn't play them, what to do??

I cant get my ipad to play movies AVI i have downloaded an App called PlayerX, and it transfers the movies over to the ipad but doesn't play them, what to do??

Have you contacted app support or maybe view this video from the website? Are you trying to play them within the app itself? Did you double tap on the video that you want to watch?
http://playerx.pentaloop.com/help/

Where can I find detailed instructions on transferring message and call logs ?

I failed to find good info on this using search etc. I switched from Droid X to Galaxy Note 3 recently. On Verizon Cloud, it tells I have the logs uploaded but my Galaxy Note 3 does not display them and I am unable to download the logs into my new phone from Verizon Cloud. Thanks in advance for any help.

Thank you Tominque. Here is the update: I misunderstood the restore phone option as going to factory settings after I had used my phone for a few days and feared to touch it. However, later I saved some of the stuff on my phone and took a chance after talking to one of your helpful reps and it worked. I got my messages and call logs into my phone, happy ending. It would be nice if there is a little more explanation on the Verizon Cloud.

8961 phone having issue receiving and calling mobile phone

Ext XXX is having issue receiving and calling mobile phone. It stated that 'Download Status -Failed' attached is the screenshot of the error in Cisco Unified CM Administration. Any idea where to look into?
If i want to grab the log, should be from Trace & Log Central under CUCM?

Phone goes "offline" for about 7-10 minutes at a time (every couple of hours) usually in the afternoon (near ~60% charge).
In an office most of the day with coverage going from 4 bars to 0 bars every few minutes or so. I never miss or drop a call though given the appearance of erattic signal. RSSI usually -83. EvDO and 1x will flicker on and off througout the day. WiFi is on all the time with WPA2. Bluetooth is on without anything connected. I will sometimes get the issue if I wander out of WiFi range (out for lunch)
Reseting the phone will clear the problem. Toggling the Airplane, WiFi, and Bluetooth on/off dont clear the problem.
I have:
- Exchange calendar setup with owa.mailseat.com (I believe they have Exchange 2003)
- Google standard calendar (personal)
- Google standard shared calendar (wifes)
My wife has a Pre as well and to my knowledge has never had the phone offline problem. (I would certainly hear about it if she did )
She has:
- Google standard calendar (personal)
- Google standard shared calendar (mine)
* No exchage setup.
Message Edited by zonyl on 08-29-2009 07:04 AM
Message Edited by zonyl on 08-29-2009 07:06 AM

Cisco Expansion Module 7916

I have an issue with the 7916 expansion module on a Cisco 7965 phone. The sidecar loads properly (wilt all the configured extensions) and the page 1 & 2 buttons on the bottom luminate correctly. However, the side LED buttons do not light when a line is in use. I can press an extension and it calls correctly but only briefly flickers green then does not light. I have switched sidecar, power supply and phone as well as looked at the configuration setting in CM. Any config/solution someone has come across that they may be able to help with? Thanks in advance for any information.

Hi Ronald.
Did you try to configure one of 7965 button as BLF speed dial?
Did it work?
Which version of CUCM are you running?
Which firmware 7965 is running?
Let me know
Regards
Carlo

Difference between Session method and call transaction

Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advance

Hi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir

Difference between Session method and Call transaction method

Hi,
Difference between Session method and Call transaction method in BDC

Hi,
SESSION method:
Is a standard procedure for transferring large amount of data into the R/3 system.
Data consistency is ensured because batch input uses all thje checks conducted on the normal screen.
It is a two step procedure:
1. Progarm: creates batch input session. This session is the data file that includes everything to begin the transaction.
2. Process session: Which then actually transfers the data to database table.
In this method an ABAP/4 program reads the external data that is to be entered in the SAP system and stores the data in a session.
A session stores the actions that are required to enter your data using normal SAP transactions i.e. data is transferred to session which inturn transfers data to database table. Session is an intermediate step between internal table and database table.
Data along with it's actions are stored in session. i.e. data for screen fields, to which screen it is passed, the program name behind it and how next screen is processed.
When the program has finished generating the session, u can run the session to execute the SAP transactions in it.
BDC_OPEN_GROUP
          You create the session through program by BDC_OPEN_GROUP function.
1) User Name: User Name.
2) Group       : Name of the session
3) Lock Date : The date when you want to process the session.
4) Keep        : This parameter is passed as 'X' when you want to retain session even       after processing it.
BDC_INSERT
     Data is transferred to session by BDC_INSERT.
BDC_CLOSE_GROUP.
     With this function the session will be closed.
CALL TRANSACTION method.
Syntax: call transaction <tr code> using <bdctab>
                             mode <A/N/E>
                             update <S/A>
                             messages into <internal table>.
<tr code>   : transaction code
<bdctab>   : Name of the BDC table
mode: mode in which you execute the transaction.
A   : all screen mode ( all the screens of the transaction are displayed )
N   : no screen mode ( no screen will be displayed when you execute the transaction )
E   : error screen ( only those screens are displayed where in you have error record )
Update type:
S: synchronous update in which if you change data of one table then all the related tables gets updated and SY_SUBRC is returned for once and all.
A: asynchronous update in which if you change data of one table, the sy-subrc is returned and then updation of other affected tables takes place. So if system fails to update other tables still sy-subrc returned is zero.(that is when first table gets updated ).
messages: if you update database table, operation is either successful or unsuccessful. These messages are stored in internal table. This internal table structure is like BDCMSGCOLL.
       TCODE: transaction code.
       DYNAME: batch input module name.
       DYNNUMB: batch input dyn no.
       MSGTYP: batch input message type.
       MSGSPRA: batch input language id of message.
       MSGID:    message id.
       MSGV1.MSGV5: message variables
For each entry which is updated in the database table message is available in BDCMSGCOLL.
Reward if useful
Regards
Srinu

Expansion Module

Hi. I'm running CallManager 4.3(1) and am using 7975 phones. We are tying to get a 7916 expansion module working on some of them. Can this be done? I'm using service release 1 of CallManager

Table 4. Cisco Unified IP Phone Expansion Module 7916 Software Requirements
Call-control compatibility
Cisco Unified Communications Manager 4.2(3) SR3a, 4.3(2), 5.1(3)b, 6.1(1), 7.0, 7.1 and later; Cisco Unified Communications Manager Express 4.3/7.0 and later. Cisco Unified Survivable Remote Site Telephony (Unified SRST) 4.1 (IOS 12.4.15T) and later.
HTH
java
if this helps, please rate

Cisco 7975 Expansion modules

Dear,
I have some questions regarding the expansion modules on phones, specifically the 7916 ones.
If i have one with 12 physical buttons and 2 page buttons i can assume it's a 24 line button i have to set on the configuration page of the phone correct? Or am i seeing this wrong. Is there a handy way of knowing this directly?
I have a specific phone Cisco 7975 that has issues getting the 7916 addon module working, i have set a 7916 24 button on the config page of the phone. The addon module still shows the logo of Cisco and doesn't change.
The load is present on the call manager, i have seen it via "Device Defaults", shall i proceed in upgrading the 7916 firmware then on the Call Manager, maybe this can solve the problem?
CM version: 8.6.2

Most of the times firmware phone/expansion
Just upgrade phone and expansion.
And you select 7975 with 7916 24 buttons or 12 buttons
JH

How to take back the control from RFC function module to calling program

Hi,
In our system landscape, more than 200 child systems are connected to Solution manager(SMP). I have copied a RFC enabled function module into all the child systems and calling that FM from Sol Man in sychronous mode.
Here goes my code in SolMan.
LOOP AT it_dest INTO wa_dest.
CALL FUNCTION 'Z_GET_LOGIN_DETAILS' DESTINATION wa_dest-rfcdest
    EXPORTING
      date_fr               = s_date-low
      date_to               = s_date-high
    TABLES
      tab_data              = it_val
    EXCEPTIONS
      communication_failure = 1
      system_failure        = 2
      OTHERS                = 3.
IF sy-subrc EQ 0.
*     Updates zuserlogon
      MODIFY zt_logon_det FROM TABLE it_val.
      COMMIT WORK.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, 'succesfully updated.'.
ELSE.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, ' failed.'.
ENDIF.
ENDLOOP.
Few child systems are very slow & takes more than 20 minutes(Many of the times system hangs) to return the result. But I should not wait for so long. Even if the child system doesn't return any values in 5 minutes I shoud continue with other system ignoring the current one.
I tried calling the FM in asynchronous mode(STARTING NEW TASK) but no success because only 6 DIA processes possible but as I said I have more than 200 systems connected to SolMan.
Please help me resolving this problem.
Thanks,
Prathap

If there are only few child systems with bad response time, use asynchronous call using a CALL FUNCTION func STARTING NEW TASK task DESTINATION dest PERFORMING subr or CALLING meth ON END OF TASK. Count asynchronous calls still running/waiting (increment a counter when creating a task (not the one used for task id). In the form/method performed at end of a call decrement the counter. When counter is lower than a limit, 4-5 if 6 processes (*), perform an asynchronous call else perform a synchronous call or wait until the counter falls below the limit.
Regards,
Raymond
(*) Use SPBT_INITIALIZE at start of program to get actual number of free/available processes.

Examples for using function modules and BApis.

My Dear FRNDS,
I am very new to ABAP. And I have read the documentation for function modules but i am not that clear to practice them.So I would be very happy if u people share a little bit of ur experience with me.
Please provide me some examples of all the use cases in function modules and specially exception handling.
Frnds, i am going to work with bapis so i feel practicing function module will give me a edge.
and please tell me after calling a BAPI FM why we have to perform 'BAPI_TRANSACTION_COMMIT' and 'BAPI_TRANSACTION_ROLLBACK'.
.Ur efforts will be greatly rewarded.
thx,
reshali

Hi,
Please check this sample codes.
DATA: BAPI_Z05DOGI_DELIVERY LIKE BAPIOBDLVHDRCON-DELIV_NUMB ,
BAPI_Z05DOGI_HEADER_DATA LIKE BAPIOBDLVHDRCON OCCURS 0 WITH HEADER LINE ,
BAPI_Z05DOGI_HEADER_CONTROL LIKE BAPIOBDLVHDRCTRLCON OCCURS 0 WITH HEADER LINE,
BAPI_Z05DOGI_ITEM_DATA LIKE BAPIOBDLVITEMCON OCCURS 0 WITH HEADER LINE,
BAPI_Z05DOGI_ITEM_CONTROL LIKE BAPIOBDLVITEMCTRLCON OCCURS 0 WITH HEADER LINE ,
BAPI_Z05DOGI_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE .
CLEAR: BAPI_Z05DOGI_DELIVERY , BAPI_Z05DOGI_HEADER_DATA , BAPI_Z05DOGI_HEADER_CONTROL , BAPI_Z05DOGI_ITEM_DATA ,BAPI_Z05DOGI_ITEM_CONTROL , BAPI_Z05DOGI_RETURN .
REFRESH: BAPI_Z05DOGI_HEADER_DATA , BAPI_Z05DOGI_HEADER_CONTROL , BAPI_Z05DOGI_ITEM_DATA , BAPI_Z05DOGI_ITEM_CONTROL , BAPI_Z05DOGI_RETURN .
BAPI_Z05DOGI_DELIVERY = ZMM_WB1-ISSUE .
BAPI_Z05DOGI_HEADER_DATA-DELIV_NUMB = ZMM_WB1-ISSUE.
APPEND BAPI_Z05DOGI_HEADER_DATA.
BAPI_Z05DOGI_HEADER_CONTROL-DELIV_NUMB = ZMM_WB1-ISSUE.
BAPI_Z05DOGI_HEADER_CONTROL-POST_GI_FLG = 'X'.
APPEND BAPI_Z05DOGI_HEADER_CONTROL.
BAPI_Z05DOGI_ITEM_DATA-DELIV_NUMB = ZMM_WB1-ISSUE.
BAPI_Z05DOGI_ITEM_DATA-DELIV_ITEM = 10.
BAPI_Z05DOGI_ITEM_DATA-DLV_QTY = LFIMGGIA.
BAPI_Z05DOGI_ITEM_DATA-SALES_UNIT = XTAB-MEINS.
BAPI_Z05DOGI_ITEM_DATA-DLV_QTY_IMUNIT = LFIMGGIA.
BAPI_Z05DOGI_ITEM_DATA-FACT_UNIT_NOM = UMVKZLIPS.
BAPI_Z05DOGI_ITEM_DATA-FACT_UNIT_DENOM = UMVKNLIPS.
APPEND BAPI_Z05DOGI_ITEM_DATA.
BAPI_Z05DOGI_ITEM_CONTROL-DELIV_NUMB = ZMM_WB1-ISSUE.
BAPI_Z05DOGI_ITEM_CONTROL-DELIV_ITEM = 10.
BAPI_Z05DOGI_ITEM_CONTROL-CHG_DELQTY = 'X'.
APPEND BAPI_Z05DOGI_ITEM_CONTROL.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
DELIVERY = BAPI_Z05DOGI_DELIVERY
HEADER_DATA = BAPI_Z05DOGI_HEADER_DATA
HEADER_CONTROL = BAPI_Z05DOGI_HEADER_CONTROL
TABLES
ITEM_DATA = BAPI_Z05DOGI_ITEM_DATA
ITEM_CONTROL = BAPI_Z05DOGI_ITEM_CONTROL
RETURN = BAPI_Z05DOGI_RETURN.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPI_Z05DOGI_RETURN.
Go thru this link
http://www.planetsap.com/LIST_ALL_BAPIs.htm
BAPI_TRANSACTION_COMMIT
Execute external Commit when using BAPIs
This method executes a COMMIT WORK command. It is required for
transactions developed externally to the R/3 System that change data in
the R/3 System via BAPI calls.
When you call BAPIs in your program that change data in the R/3 System,
afterwards you must call this method to write the changes to the
database.
COMMIT WORK
The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the currenta SAP LUW in the process
there are some FM that we use for creating trasaction . for example FM : that use for creating production order . if you execut the FM , the system will not create any data in the system so you need to excute the FM : BAPI_TRANSACTION_COMMIT to commit that creating the production order .
in case of commit work, that is a syntax in abap program . if you use this syntax after you insert ,update or delete table in the sap ,system will do it immediately otherwise the system will do it after execution is complete.
ROLLBACK WORK.
for confirming or undoing database updates. COMMIT WORK always concludes a database LUW and starts a new one. ROLLBACK WORK always undoes all changes back to the start of the database LUW.
Regards,
Raj.

8961 Expansion Module and Call Transfers

Similar Messages

Maybe you are looking for