8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

IDOCs not created for Payment method "P" and "B"

Dear Experts,
I have executed the Automatic Payment program for three payment methods (P,V and B - Foreign Currency) in one Run ID. Payment run was successful but it has created IDOCs for the documents / Vendors attached with payment method "V" but IDOCs were not created for the payment methods "P" and "B". I have checked the configuration relating to payment methods and those were assigned with Form details and the maximum amount is also defined in the payment methods.
Can any one suggest me where I had made the mistake / where I need to check the configuration settings.
Thanks a lot.
Regards,
Ramnath.

Hi Surya,
Please find below error log created while executing the Payment run for the issue.
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000116195, user ID V-PIZHA)
Step 003 started (program RFFOEDI1, variant &0000003957078, user ID V-PIZHA)
Maintain an output device in your user master record
Job cancelled
Thanks and Regards,
Ramnath,
SAP FIMM Team

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.

To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

I uses Time Machine to transfer files and program from old to new MacBook Pro. Aperture doesn't work. Every time I open Aperture the computer need me to key in Serial number. How do I fix it.

Hi There,
I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
Nelson

Either the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

Payable Invoice has not created for internal requisition. ( R12.1.3)

HI,
This is an issue where i am facing for which the invoice has not created for the internal requisition, whereas the Receivables Transaction has created automatically for the same internal SO.
Is there any way to find out the invoice, because i have again ran the Report "Create Inetrcompany AP invoice" and when i mchecked in the log it says 0 fetched invoice....
Kindly help me out to solve this issue,
Thanks in advance.
Vijay

Hi Vijay,
Did you check in AP_INVOICES_INTERFACE table if there are some records with INVOICE_NUM like '%AR invoice number%'?
If no records in the interface table - can you please, check by submitting the program without giving any input parameters?
Regards,
G V Ranjith

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Unable to change content types for pptx, xslx and docx files

I'm running into an issue where I cannot change the content type of any xml-based Office documents. Here's what I've done:
1 - Create a custom content (A) type based off the Document content type
2 - Enable the custom content type in a document library
3 - Add a document or select an existing document and edit the content type to the custom content type
4 - The custom content type will save for documents such as .ppt, .doc, etc. The custom content type will now save for .docx, .pptx or .xlsx files. The properties window will save without displaying any errors but the content type will not change
I ran several tests including creating another custom content type (B) based off of the Document content type. I proved that:
The custom content type (B) can be saved to .docx, .pptx or .xlsx files IF no additional columns are added to the custom content type
As soon as I add a column to the custom content type the aforementioned documents cannot be saved as that custom content type
Documents created through the File option in a document library also fail to change content type to the custom content type when saved. Most of my files are .docx, .pptx, or .xlsx files, and this issue poses a significant roadblock in our SharePoint roll-out.
I appreciate any advise you can provide.

Hi,
According to your post, my understanding is that the custom content type could not save with .docx, pptx and xlsx files when with a additional column.
I tested with your issue as the steps below, the custom content type worked well.
Create a custom column Doc1
Create a custom content type Doc1, the parent content type from chose the Document Content Types, Parent Content Type chose Document.
Add the custom Doc1 to the custom content type Doc1.
Add the custom content type into the library LIbA.
Upload the files with .docx, .pptx and .xlsx files into the library with the custom content type, they all save well with the custom content type.
I also create other content type with other Parent Content Type, they all worked.
Did the issue occur in other library? You can create a new library then use the custom content type to check whether it works.
You can also use the other browsers to check whether it works, such as Chrome, Firefox.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Import dimension and member via maxl, how to create data file and rule file

Hi
I have a task to import dimension and member into Essbase, for project requirement, I have to use text file or spreadsheet file.
I wonder which format can be imported into Essbase?
I tried to create them, failed.
Do you have any samples to help me? dimension file and rule file...
I search a lot in http://gerardnico.com/wiki/epm/essbase/dimension_build#about , but there are no samples.
Thanks in advance...
Best regards,
Samantha

import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using rules_file 'C:\TEMP\GENREF.rul' on error append to 'C:\TEMP\logs\dimbuild.log';Here issue is not with rulefile but in reading the rule file.
I hope rule file is in the database directory (By default it will get saved there only)
Try with the below command
import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using server rules_file 'GENREF' on error append to 'C:\TEMP\logs\dimbuild.log';
Rule file also had one issue
Market, Product, Measures, Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, DecHere I am seeing only four dimensions from the Sample.Basic database
Scenario is missing. So define Actual (Scenario Dimension member) in the rule file header definition.
All dimensions must be identified to parse one data file with rule file.
PS: Naming (GENREF) is also irrelevant if you are loading data. It is apt for dim load.

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT201272 Hi I have a problem to recover files and programs iPhone 4

Hi I have a problem to recover files and programs iPhone 4
Please note that I did backup How can I recovered
thank you..

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was based on Power PC code and was written to be able to run on both Power PC and Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
If you’re happy with 10.5 there’s no need for you to upgrade. But realize that you can’t update any applications. Companies like Adobe, Google, Firefox, etc.. no longer support anything less than 10.6.
The 10.6 Snow Leopard DVD is back in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

I have an IMAC and a IPAD 2 can data, files and Programs, be shared or tranfered?

I have an IMAC and a IPAD 2 can data, files and Programs, be shared or tranfered?

The Mac uses Mac OS X. The iPad uses iOS. These are two different operating systems and the apps written for one will not run on the other. Some Apple and 3rd party apps have been developed in both OSes. These apps can usually share data and files across the two OS platforms.

Deleting Files and Programs - Again!

Hi,
I've asked this quesition slightly differently before and the responses have dried up, so I thought I'd try again as I've made some progress...
I cannot drag a program (to uninstall it) or a file (to delete it) directly in to the Trash.
If I drag the file or icon from anywhere other than the desktop, nothing happens, i.e. the file or icon stays where it is and the Trash remains empty.
If I drag a file or program from the desktop, I'm asked for a password and the file is permanently deleted.
If I drag a file or program from an external drive (USB Drive) it works properly (no password and it isn't permanently deleted unless I empty the Trash)
I have set up a different user on my iMac and the problem is not replicated.
Will someone please tell me why this should start happening or, better still, what I can do to revert back to normal.
Thank you,
Pete

Downloaded BatChmod and reset the Sharing & Permissions settings - worked like a dream!

8dot3 filenames not created for Program Files and Program Files (x86)

Similar Messages

Maybe you are looking for