8i Forms 6i & 9i Developer Suite in the same machine?

I hav installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine, with different Oracle homes.
earlier it was working fine,but right now when i tried to open Form Builder(9i),it shows the error as
Microsoft Visual C++ Runtime library
Assertion Failed!
Program:D:Oracle_Home\bin\ifbld90.exe
File:ut\SRC\UTJ\SRC\UTJL.C
Line 428
Expression: result ==utjER_SUCCESS
For information on how your program can cause assertion
failure,see the VC++ documentation on asserts
(Please try to debug the application - JIT must be enabled)
and when i try to open Reports Builder(9i) it does not open ,it shows error as below and terminates
rwbuilder.exe - Application Error
The instruction at "0x6550b264" referenced memory at "0x00000000".The memory could not be "read:
Please advise what to be done.
Thanx in advance.

I've got a 9i database, Jdeveloper (various versions), Oracle9i Forms and 6i Forms all installed on the same machine. Just make sure you get them in separate Oracle homes..
Regards
Grant Ronald
Forms Product Management

Similar Messages

Installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine??

I hav installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine(on Win2k), with different Oracle homes.
earlier it was working fine,but right now when i tried to open Form Builder(9i),it shows the error as
Microsoft Visual C++ Runtime library
Assertion Failed!
Program:D:Oracle_Home\bin\ifbld90.exe
File:ut\SRC\UTJ\SRC\UTJL.C
Line 428
Expression: result ==utjER_SUCCESS
For information on how your program can cause assertion
failure,see the VC++ documentation on asserts
(Please try to debug the application - JIT must be enabled)
and when i try to open Reports Builder(9i) it does not open ,it shows error as below and terminates
rwbuilder.exe - Application Error
The instruction at "0x6550b264" referenced memory at "0x00000000".The memory could not be "read:
Please advise what to be done.
Thanx in advance.

I've got a 9i database, Jdeveloper (various versions), Oracle9i Forms and 6i Forms all installed on the same machine. Just make sure you get them in separate Oracle homes..
Regards
Grant Ronald
Forms Product Management

Is it ok to install Report developer suite on the same machine?

Hello All,
Recently I have upgraded my Oracle Forms 5.0 to Form 6i.
Now I want same process with my reports.
Our current reports version is 3.1.
1) Is it possible to upgrdae report 3.1 to report 6i?
2) I have installed my form 6i developer suite in window XP. Is it ok to install Report developer suite on the same machine?
3) if answer of 2 is yes, Do I need to install in another home?
Please note: My main goal is to upgrade reports in 10g.
But I think we can not upgrdae report 3.1 to 10g directly. So I am going 3.1 to 6i and then go for 10g.
Regards,
D

still waiting for response.
Diana

Forms 6i and developer 10g on the same machine

Can i have forms 6i and developer 10g on the same machine

Jacob,
Were you installing any patches to the Forms 6i?? I think your problem was a mix up in the environmental variables.
multiple versions of the same Oracle product CAN* be installed successfully on the same machine, it has been done by many.
Do not generalize one experience, since you are working on VMware, try them on one, it's easy to revert to a snapshot ;)
Install Forms 6i first patch it configure it and restart your machine and install DS 10g, On this machine I have Forms 6i and DS 10g installed at this same moment, and it's been working fine for that last 2 years.
Tony

How to use Forms 5 and DevSuite 10g in the same machine

Hello everybody,
I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
Thanks and regards
Sukanta sarkar

Sukanto,
What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
Hope this helps.
Craig...

8i Pers, Forms 6i, Report 6i & 9i Pers, Dev. Suite in the same machine?

Hi everyone.
I am using Oracle 8i Personal, Forms 6i and Reports 6i using my Pentium 4 with Windows 98 SE.
I want to install Oracle 9i Personal and Developer Suite (Forms 9i, Jdeveloper and OC4J.) but I want to keep 8i and Forms 6i.
Is this possible could I keep both, Oracle 8i and Oracle 9i?
I would like install Windows 2000 Professional and install everything (8i, Forms & 9i & Developer Suite) in that machine.
If it is possible, how I can do that?
Thanks in advance for your answer!!

I have the following homes:
- ORA8i
- Dev 6i: for Developer 6i and Designer 6i
- RDBMS 9i SE
- Dev 9i: for Developer 9i and Designer 9i
plus a separate directory for JDev 9.0.3. This one needs no Oracle home thank God. :-)
One more thing. Some applications will not be able to find the aliases if there are more than one Oracle homes and the aliases are not present in ALL tnsnames.ora files.
To avoid this I set the TNS_ADMIN environmental variable for my tnsnames.ora file (aliases for the database).
HTH

How do we Install Forms 6i and Server 8i on the same machine (PC)

Well i am Trying to Install Forms6i and Oracle 8i Server on the same PC and not succeeding. Can anyone help.

Follow below steps
1. Remove all Oracle versions in your machine. In NT, To Delete Oracle, delete HKEYLocalMachine/software/oracle , HKEYLocalMachine/software/services/oracle* registry keys, restart m/c and delete all oracle home directories.
2. Install Forms 6i Server in the default home directory. If you want to develop forms in same m/c, use custom installation and select forms server, forms developer and webdb listner ( if needed ).
3. Install Oracle 8i in a different oracle home.
4. configure oracle forms server and webdb listner. ( See Note:107596.7 in matalink)

Developer 1.6, 2.1 and 6i on the same machine does not work

I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
Is trying to find it in the path of the Developer 2.1 and of course it does not work.
The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
It is possible some workaround even if running one version at a time.
Thanks.

I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
Is trying to find it in the path of the Developer 2.1 and of course it does not work.
The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
It is possible some workaround even if running one version at a time.
Thanks.

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

   VALUES
    ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
      <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanks

duplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i

How to install forms 6i on the same machine oracle8i installed

I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Risks of two development groups in the same system

Hi,
I need your help.
I'm looking for a document about the risks having two development groups in the same system.
The point is: An external party will come soon and start the implementation of a mini H2R in the same system as we (the internal team) are working for SD, MM, CO,... As the developments are cross-client, I'm asked to write a document explaining the risks in such cases like:
conflicts: working on the same objects
authorisations: each group should be assigned to different packages
planning: the go-live should be at the same time
transports: there can be conflicts on a transport-level
If you have any documentation that can help me, please let me know.
Kind regards, Gilles.

I hope this is not considered a link farm:
Potential conflicts between already released transports:
Program to validate transport sequence
Uwe Schieferstein's blog on "Dangerous Liaisons in User-Exits and How to Avoid Them":
/people/uwe.schieferstein/blog/2008/11/11/dangerous-liaisons-in-user-exits-and-how-to-avoid-them
Just two of many things to observe...
Thomas

Two forms that update differrent tables on the same page?

I tried to add two forms that update different tables on to one page.
Problem is when I do that the forms gives me an error saying the field does not exist. It's like it is trying to update one table with the other tables fields.
As an example Say I have one forms that is for people table and another one that is the Jobs table.
When I go to update the people table, it sends the data for the jobs fields too I get an error like the field job description does not exist.
I have two different forms for these and everything.
I would hope it is possible to have two forms that update different tables on the same page.

I was trying the exact same thing, but i managed to work round it by setting the steps to hide one region, so the user would enter the form see one region submit the region then direct back to the same page with the different region visible and the original hidden.
I don't know if this would be acceptable for you...

I've recently purchased a new computer. How do I migrate Creative Suite to the new machine?

I am a student who recently had to buy a new computer and would like to transfer my Adobe Creative Suite applications over to the new machine. When I did a general search I found the linc to the cloud discussion but was unable to find the option located in preferences for starting this process. Is this the correct procedure if I want the Creative Suite on the new machine? I'm a beginner at both the use of these applications, and the process of migrating data from an old machine to a new one and will probably have to call customer service, but I thought I'd try the forum first.
Thanks in advance for any suggestions.
Elizabeth-
Canon Rebel User

It is just a matter of installing the software on the new machine, nothing in the way of migration is necessary. Just repeat the same process you used for the old machine on the new machine. Since your license allows installation on two machines, you have the option of leaving it on the old machine.
If you prefer to you can deactivate the software on the old machine so that you still have the opportunity to install/activate the software on another machine if need be.
If you happen to require downloading the suite to the new machine you can do so using the site below to download the trial version and then use your serial number to activate it to full use. Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/tag/ddl

8i Forms 6i & 9i Developer Suite in the same machine?

Similar Messages

Maybe you are looking for