8i, sqlnet, no joy
Installed 8i easily, seems the patch also patched everything o.k.
sqlplus just doesn't connect.
running "adapters oracle" shows that no protocols are bound.
When I installed no protocols were found
Apparently this is is bug?
How do I fix this?
All I need is to open a sqlnet session.
BTW. anyone used the Oracle Application Suite for Linux?
(oracle.mattshouse.com) ??? opinions?
null
Your comment about installing 8i easily has piqued my interest!
What is your HW/SW platform?
Mine is:
Intel L440GX+/1 600Mhz Pentium III
8GB RAID 1 for /
34GB RAID 5 for /oracle01-04
256MB RAM
RH 6.0
jdk/jre 1.1.7v3
GOME 1.0.4/Enlightenment 0.15.5-37
Details are in a post on this list.
John Goodens (guest) wrote:
: Installed 8i easily, seems the patch also patched everything
o.k.
: sqlplus just doesn't connect.
: running "adapters oracle" shows that no protocols are bound.
: When I installed no protocols were found
: Apparently this is is bug?
: How do I fix this?
: All I need is to open a sqlnet session.
: BTW. anyone used the Oracle Application Suite for Linux?
: (oracle.mattshouse.com) ??? opinions?
null
Similar Messages
-
Hi Community,
I have a challenge getting 2 Oracle servers with each located in "internal" and "DMZ" network segments.
The oracle server on the internal network can communicate with the one on the DMZ but the one on the DMZ can NOT talk to the one on the internal network.
The customer wants the architecture to enable realtime data updates on the Oracle in DMZ.
My config is as follows: I need help.
ciscoasa# wr t
: Saved
ASA Version 8.4(3)
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.1.184.131 Proxy_Server
name 192.168.10.1 Internet_Router
name 10.1.184.122 Mail_Server
name 10.1.184.116 Mail_Server_2
name 10.1.184.121 Mail_Server_3
dns-guard
interface GigabitEthernet0/0
nameif Inside
security-level 100
ip address 10.1.184.1 255.255.248.0 standby 10.1.184.254
interface GigabitEthernet0/1
description LAN/STATE Failover Interface
interface GigabitEthernet0/2
nameif DMZ
security-level 50
ip address 192.168.30.1 255.255.255.0 standby 192.168.30.2
interface GigabitEthernet0/3
nameif Outside
security-level 0
ip address 192.168.10.2 255.255.255.0 standby 192.168.10.20
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
boot system disk0:/asa843-k8.bin
ftp mode passive
clock timezone GMT 1
dns server-group DefaultDNS
domain-name default.domain.invalid
object network Proxy_Server
host 10.1.184.131
object network Mail_Server
host 10.1.184.122
object network Internet_Router
host 192.168.10.1
description Created during name migration
object network Mail_Server_2
host 10.1.184.116
description Created during name migration
object network Mail_Server_3
host 10.1.184.121
description Created during name migration
object network WebServer1
host 192.168.30.3
object network InternalNetwork
subnet 10.1.184.0 255.55.248.0
object network DMZ-IdentityPool
range 192.168.30.30 192.168.30.254
object network WebServer2
host 192.168.30.4
object network obj-remote
subnet 192.168.0.0 255.255.255.0
object network obj-DMZ
subnet 192.16.30.0 255.255.255.0
object network DatabaseServer
host 10.1.184.134
object network AppServer
host 10.1.184.126
object network MailServer
host 10.1.184.116
access-list Inside_access_in extended permit ip object Proxy_Server any
access-list Inside_access_in extended permit ip host 10.1.184.190 any
access-list Inside_access_in extended permit ip host 10.1.184.83 any
access-list Inside_access_in extended permit icmp host 10.1.184.190 any
access-list Inside_access_in extended permit ip host 10.1.184.67 any inactive
access-list Inside_access_in extended permit ip host 10.1.184.83 object Internet_Router
access-list Inside_access_in extended permit ip host 10.1.184.190 object Internet_Router
access-list Inside_access_in extended permit udp any any
access-list Inside_access_in extended permit icmp any any
access-list Inside_access_in extended permit ip object Mail_Server any
access-list Inside_access_in extended permit tcp object Mail_Server any eq smtp
access-list Inside_access_in extended permit ip object Mail_Server_2 any
access-list Inside_access_in extended permit tcp object Mail_Server_2 any eq smtp
access-list Inside_access_in extended deny tcp any any eq smtp
access-list Inside_access_in extended permit icmp host 10.1.184.43 any
access-list Inside_access_in extended permit ip object Mail_Server_3 any
access-list Inside_access_in extended permit tcp object Mail_Server_3 any eq smtp
access-list Inside_access_in extended permit ip host 10.1.184.190 host 192.168.30.3
access-list Inside_access_in extended permit tcp object InternalNetwork host 192.168.30.3 eq www
access-list Inside_access_in extended permit ip host 10.1.184.137 host 10.1.184.133
access-list Inside_access_in extended permit ip host 10.1.184.62 host 10.1.184.133
access-list Inside_access_in extended permit ip host 10.1.184.117 any
access-list Inside_access_in extended permit ip host 10.1.184.117 object Internet_Router
access-list Inside_access_in extended permit ip host 10.1.184.129 any
access-list Inside_access_in extended permit ip host 10.1.184.129 object Internet_Router
access-list Inside_access_in extended permit ip host 10.1.184.150 host 10.1.184.133
access-list Inside_access_in extended permit ip host 10.1.184.150 any
access-list Inside_access_in extended permit ip host 10.1.184.190 host 192.168.30.4
access-list Inside_access_in extended permit tcp object InternalNetwork host 192.168.30.4 eq www
access-list Inside_access_in extended permit tcp host 10.1.184.134 host 192.168.30.4 eq sqlnet
access-list Outside_access_in extended permit udp any eq domain object Proxy_Server
access-list Outside_access_in extended permit icmp object Internet_Router any
access-list Outside_access_in extended permit icmp any host 10.1.184.190
access-list Outside_access_in extended permit icmp any host 10.1.184.83 inactive
access-list Outside_access_in extended permit tcp any object Proxy_Server eq https
access-list Outside_access_in extended permit tcp any object Proxy_Server eq www
access-list Outside_access_in extended permit tcp any object Mail_Server eq smtp inactive
access-list Outside_access_in extended permit tcp any object Mail_Server_2 eq pop3
access-list Outside_access_in extended permit udp any eq domain object Mail_Server_2
access-list Outside_access_in extended permit tcp any object Mail_Server eq imap4 inactive
access-list Outside_access_in extended permit icmp any object Mail_Server inactive
access-list Outside_access_in extended permit tcp any object Mail_Server_2 eq smtp
access-list Outside_access_in extended permit tcp any object Mail_Server_2 eq imap4
access-list Outside_access_in extended permit icmp any object Mail_Server_2
access-list Outside_access_in extended permit icmp any host 10.1.184.43
access-list Outside_access_in extended permit tcp any host 192.168.30.3 eq www
access-list Outside_access_in extended permit tcp any host 192.168.30.3 eq https
access-list Outside_access_in extended permit icmp any host 192.168.30.3
access-list Outside_access_in extended permit icmp any any echo-reply
access-list Outside_access_in extended permit icmp any host 192.168.30.3 echo
access-list Outside_access_in extended permit tcp any host 192.168.30.4 eq www
access-list Outside_access_in extended permit tcp any host 192.168.30.4 eq https
access-list Outside_access_in extended permit icmp any host 192.168.30.4 echo
access-list Outside_access_in extended permit icmp any host 192.168.30.4
access-list branchgroup-SplitACL standard permit 10.0.0.0 255.0.0.0
access-list branchgroup-SplitACL standard permit 192.168.30.0 255.255.255.0
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 192.168.30.116 eq smtp
access-list DMZ_access_in extended permit icmp host 192.168.30.4 any
access-list DMZ_access_in extended permit ip host 192.168.30.4 host 192.168.30.134
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 192.168.30.134 eq sqlnet
pager lines 24
logging enable
logging timestamp
logging standby
logging emblem
logging list InformationalLog level informational
logging list InformationalLog message 101001
logging buffer-size 16384
logging console notifications
logging monitor errors
logging buffered critical
logging trap errors
logging asdm critical
logging mail informational
logging host Inside 10.1.184.132
logging host Inside 10.1.184.190 6/1470
logging debug-trace
logging ftp-server 10.1.184.190 \\marinasec\akanoa akanoa *****
logging permit-hostdown
logging class auth buffered emergencies trap emergencies
logging class bridge buffered emergencies trap emergencies
logging class config buffered alerts trap emergencies
logging class ip buffered emergencies trap alerts
logging class sys trap alerts
logging class ca trap emergencies
logging class email buffered emergencies trap errors
mtu Inside 1500
mtu DMZ 1500
mtu Outside 1500
mtu management 1500
ip local pool remoteusers 192.168.0.1-192.168.0.254
failover
failover lan unit secondary
failover lan interface stateful_failover GigabitEthernet0/1
failover replication http
failover link stateful_failover GigabitEthernet0/1
failover interface ip stateful_failover 192.168.20.1 255.255.255.252 standby 192.168.20.2
no monitor-interface management
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Inside
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
nat (DMZ,Outside) source static obj-DMZ obj-DMZ destination static obj-remote obj-remote
nat (Inside,Outside) source static InternalNetwork InternalNetwork destination static obj-remote obj-remote
object network Mail_Server
nat (Inside,Outside) static Mail_Server no-proxy-arp route-lookup
object network WebServer1
nat (DMZ,Outside) static 192.168.30.3 dns
object network WebServer2
nat (DMZ,Outside) static 192.168.30.4 dns
object network DatabaseServer
nat (Inside,DMZ) static 192.168.30.134
object network AppServer
nat (Inside,DMZ) static 192.168.30.126
object network MailServer
nat (Inside,DMZ) static 192.168.30.116
access-group Inside_access_in in interface Inside
access-group DMZ_access_in in interface DMZ
access-group Outside_access_in in interface Outside
route Outside 0.0.0.0 0.0.0.0 Internet_Router 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server vpn protocol radius
aaa-server vpn (Inside) host 10.1.184.119
key *****
aaa-server vpn (Inside) host 10.1.184.120
key *****
user-identity default-domain LOCAL
http server enable
http 10.1.184.190 255.255.255.255 Inside
http 10.1.184.2 255.255.255.255 Inside
http 10.1.184.83 255.255.255.255 Inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set rmtset esp-3des esp-md5-hmac
crypto dynamic-map dyn1 1 set ikev1 transform-set rmtset
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
telnet 10.1.184.83 255.255.255.255 Inside
telnet 10.1.184.190 255.255.255.255 Inside
telnet 10.1.184.167 255.255.255.255 Inside
telnet timeout 5
ssh 10.1.184.83 255.255.255.255 Inside
ssh 10.1.184.190 255.255.255.255 Inside
ssh 10.1.184.43 255.255.255.255 Inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy branchgroup internal
group-policy branchgroup attributes
dns-server value 10.1.184.120
split-tunnel-policy tunnelspecified
split-tunnel-network-list value branchgroup-SplitACL
default-domain value marinasecuritieslimited.com
username sannib password 3gB/xWLMBVp/AjjW encrypted
username adebimpel password O./lZ/3rlYD/87u2 encrypted
username ojoawob password w1h9Aq2Welzv1fuW encrypted
username agbajer password NuDaZPLHC0BcF7iI encrypted
username oyenihib password eoxptVEUfczen6VR encrypted
username odewolef password yB12L9t1gcr.Wgx/ encrypted
username mainuser password 8KBTvbq5FOuoFce2 encrypted privilege 15
username maakano password c1Cb3uSluyfsyWUb encrypted
tunnel-group branchgroup type remote-access
tunnel-group branchgroup general-attributes
address-pool remoteusers
default-group-policy branchgroup
tunnel-group branchgroup ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:bbe838eb9af33fc84083989823bc0c22
: end
[OK]
ciscoasa#Hi,
Seems to me that you have configured Static NAT from "inside" to "dmz" so that the "inside" servers are visible to the "dmz" with the IP address belonging to the "dmz"
Is this something that you absolutely need? Is there something preventing you from using the IP address ranges on both "inside" and "dmz" and not doing NAT for them at all between those interfaces?
IF you want to keep the current setup intact regarding NAT, change the DMZ ACL to use the actual 10.1.184.x IP addresses as the destination IP address in the ACL.
In other words, always use the Real IP address of the host in the ACL configuration, NOT the NAT IP address. After doing that change I suppose it should also work for "dmz" to "inside". (NAT IP was used in the ACL in the ASA versions 8.2 and below, the Real IP address is used in software 8.3 and above)
Change
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 192.168.30.116 eq smtp
access-list DMZ_access_in extended permit icmp host 192.168.30.4 any
access-list DMZ_access_in extended permit ip host 192.168.30.4 host 192.168.30.134
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 192.168.30.134 eq sqlnet
To
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 10.1.184.116 eq smtp
access-list DMZ_access_in extended permit icmp host 192.168.30.4 any
access-list DMZ_access_in extended permit ip host 192.168.30.4 host 10.1.184.134
access-list DMZ_access_in extended permit tcp host 192.168.30.4 host 10.1.184.134 eq sqlnet
You can also use the "object" names in the ACL.
Which would be
access-list DMZ_access_in extended permit tcp host 192.168.30.4 object MailServer eq smtp
access-list DMZ_access_in extended permit icmp host 192.168.30.4 any
access-list DMZ_access_in extended permit ip host 192.168.30.4 object DatabaseServer
access-list DMZ_access_in extended permit tcp host 192.168.30.4 object DatabaseServer eq sqlnet
Hope the above helps Please ask more if needed.
- Jouni -
With the error message in my sqlnet.log,what can I do?
I am installing Oracle IAS Today in my win2000 server system.When I restart my computer,I fond these message in the sqlnet.log file :
Fatal NI connect error 12515, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=yfz)(PORT=1521))(CONNECT_DATA=(SERVER=SHARED)(SERVICE_NAME=mouse)(PRESENTATION=http://admin)(CID=(PROGRAM=D:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe)(HOST=YFZ)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.1.7.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.1.7.0.0 - Production
Time: 25-1TB -2002 16:02:39
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12564
TNS-12564: TNS#:>\>xA,=S(refuse connect)
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
What the problem is ?
Any help appreciate!The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I haven't been able to download a podcast for about 4 weeks now. I have reset the phone and deleted then reinstalled the app but no joy. Does anyone know how to get it going again. This problem is happening with all podcasts not just some
I haven't been able to download a podcast for about 4 weeks now. I have reset the phone and deleted then reinstalled the app but no joy. Does anyone know how to get it going again. This problem is happening with all podcasts not just some
-
OK, I've installed Oracle & installed a database using the procedures listed in another thread (following the thread as best I could). But, I can't connect to the database remotely. I can connect from my local machine using sqlplus without difficulty. I looked at my listener.log and it shows each of the attempted logins and seems to return a result code of 0 (which is good, right?). One thing that may be affecting this is that I can't seem to get netasst to run and dbassist only works about half the time (but it did work to create the database).
The specific error message I get when attempting to connect remotely is
"ORA-12545 Connect failed because target host or object does not exist"
I checked the tnsnames.ora file on the remote machine and it has the correct IP address for my system and the correct SID and port.
I'm running RH 7.1 and Oracle 8.1.7. I've installed the compatibility libraries and the patch with the setup stubs script.
Also, TNSPing works from a remote machine. It does not work from the local machine if I try the format tnsping <connect string>
My sqlnet.ora and tnsnames.ora files (both are saved in $ORACLE_HOME/hs/admin--is that ok?):
sqlnet.ora (edited manually from something I found on the net):
SQLNET.EXPIRE_TIME = 37
SQLNET.AUTHENTICATION_SERVICES = (NONE)
NAMES.DEFAULT_DOMAIN = <<mydomain.com>>
NAMES.DIRECTORY_PATH = (ONAMES)
NAMES.PREFERRED_SERVERS =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = <<myhostname.mydomain.com>>)
(Port = 1575)
#tnsnames.ora file
ESO.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = xxx.xxx.xxx.xxx)
(Port = 1521)
(CONNECT_DATA = (SID = eso)
Sample section of listener.log:
24-MAY-2001 16:10:39 * (CONNECT_DATA=(SID=eso)(CID=(PROGRAM=C:\GMSI\Ora806\BIN\VAW.EXE)(HOST=GMSI_0920)(USER=XXXXXX))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=3658)) * establish * eso * 0
24-MAY-2001 16:18:06 * ping * 0
24-MAY-2001 16:18:32 * ping * 0
--JimCan anybody help me? I really want to be able to connect to the database from another computer on the network. Perhaps someone could tell me how to construct my sqlnet.ora file? Or, the names.ora file?
--Jim -
SQLNET authentication problem!
Hi,
We have a setup in which the database server is running on a 'XXX' domain and all the clients are running in domain 'YYY'.
On the client, if following is the setup, then the clients face ORA-03113 after around 45 to 90 minutes of idle time.
SQLNET.ORA
NAMES.DEFAULT_DOMAIN=YYY
TNSNames.ORA
DBName.YYY = (..........
Note: This is not happening with all the clients in 'YYY' domain.
Now, we thought this was a domain authentication problem and removed the DEFAULT_DOMAIN setup from the client. Still the client faces ORA-03113.
As a part of trial, we moved one of the machines which was facing the problem to the domain of the database server and the error is gone.
But, due to obvious reasons, it is not possible to move all the clients to the domain of database server.
Is there any way to get around this problem?
Why is it that only some of the clients are facing this problem?
Why is it that the error occurs only after idle time and not during work?
Do we need to set NAMES.DEFAULT_DOMAIN=XXX at client? (I apologize for this question but I am really confused with the matters now)
Addition info: The database server is Oracle 10.1.0.2.0 and clients are ranging from Oracle 8.1.6 to Oracle 10.1.0. And the errors occur on clients with any version of Oracle.
Please help us out in this regard.
Thanks in advance,
SatishI have gone thorugh the Action suggested for this oracle error.
If problematic machine is shifted to the domain XXX, error is gone,Do you shift physically to some other network?? if yes then there might be a problem with your network. The machines which are disconnected, might be on the same network channel or switch which is creating some problem in your network. this is only luck that your failure occur when there is no activity from that client which is disconnected.
Shift the places of problem facing client and non-problem facing client with each other and then check. It will clear the mind about the netrowk problem
Regards -
My Apple TV is not working all of a sudden .
There is power to it , the light is on . I have turned it off and back on but no joy .
I have changed the hdmi cable .
I have reset it using the aluminium remote .
When I go to play a song using my I phone the Apple TV box is there on my phone but music comes out intermintant .
My tv screen is just blank but when I reset it the apple logo comes on my tv but then nothing elseconnect it to usb (on a computer)and restore the firmware
-
PL/SQL program not working when connect database via SqlNet
Hi,
This is a segment of a PL/SQL program before opening a cursor using input descriptor. It is working fine ( to get the value of unOutputCount ) without connect to a database via SqlNet, can anyone tell me why it is not working ( unOutputCount return 0)while connecting to a database via SqlNet and how to make it work without opening a cursor before DESCRIBE OUTPUT ...?
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'input_111'
WITH MAX 100;
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'output_111'
WITH MAX 100;
EXEC SQL PREPARE STMT1 FROM :psSqlStatement;
EXEC SQL DECLARE CURSOR1 CURSOR FOR STMT1;
EXEC SQL DESCRIBE INPUT STMT1
USING DESCRIPTOR GLOBAL 'input_111';
/* Get count of input parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'input_111' :unInputCount = COUNT;
EXEC SQL DESCRIBE OUTPUT STMT1
USING DESCRIPTOR GLOBAL 'output_111';
/* Get count of output parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'output_111'
:unOutputCount = COUNT;Hi,
Welcome to Oracle OTN Forums!
I changed your code a little. I think this help you
CREATE OR REPLACE
PROCEDURE xx_test
IS
v_pid VARCHAR2(100);
v_cn VARCHAR2(100);
v_id VARCHAR2(1000);
v_val VARCHAR2(1000);
CURSOR C1
IS
(SELECT product_id, 'PRODUCT_ID' cn
FROM product1 );
BEGIN
FOR V1 IN C1
LOOP
FETCH C1 INTO v_pid, v_cn;
dbms_output.put_line('==== '||v_pid||'==== '||v_cn);
EXECUTE IMMEDIATE
'SELECT product_id, DECODE(COUNT (product_id),1,MAX (product_id))||'''||V_CN||''' as val
FROM product1
WHERE product_id =:a
GROUP BY product_id)' INTO v_id, v_val USING v_pid;
dbms_output.put_line('==== '||v_id||'==== '||v_val);
EXECUTE IMMEDIATE 'UPDATE product2 SET '||v_cn||' = ' ||''''|| v_val ||''''|| ' WHERE product_id = :b' USING v_pid;
dbms_output.put_line('++++ '||v_cn||'++++ '||v_val||'++++ '||v_pid);
END LOOP;
END xx_test; -
Hello all.. I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box. I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state? Sorry for the long question. Hopefully one of you clever people can help. SimonClntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ? -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
SqlNet 2.3.4 & Net8 - how can they run on the same PC?
I have an application that requires SQL-Net 2.3.4 and I have another application that requires Net8. I have installed Net8 into the same folder as SQLNet was installed - per instructions in the Oracle8 Users guide, Chapter 4. The application that runs the Net8 works fine, but the application that run SQLNet works except for when it tries to use the "Microsoft ODBC for Oracle" driver. Then I get an error "Error in Vantive Connect Timer Routine 3151 ODBC - connection to "Vantive_Reports' failed." Does any one out there run both Net8 & SQLNET on the same machines? Do you have any hints on how to make it work?
Gloria, the best thing to do in this instance is open a TAR on Metalink and someone will get back to you. If you need assistance with opening an iTAR, let me know.
Thanks!
Roger Feigelson -
My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.
Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP. -
Secure link to itunes store failed, (computer not connected to internet tried uninstalling everything to do with itunes,no joy also errror code E0000225 appearing. Have turned off windows firewall and also my Bullguarg security settings.Can anybody out there please help me thanks.
Hi,
You could be right that the response to clicking on help is a symptom of an entirely separate issue, but nevertheless the secure link to itunes is definitely failed, and I am unable to log into Itunes on either PC.
I also noticed that even if I click on the link to create a whole new Apple ID, I cannot do that either, presumably because the secure link is not working.
After I noticed that there were weird things happening this morning, I did change my Apple ID password in the hope that this might resolve it, but it seemed to make it worse. Now, all of my apple devices keep constantly prompting me for the apple ID password, and randomly either accepting it, or telling me it is wrong. I know the password is correct because I can log onto the apple Manage My Apple ID screens in a web browser with it.
I was starting to think that this is an ISP issue (BT Broadband), but I have not seen anyone else posting with the same issue. Does Apple use a different security protocol to everyone else? I'm asking because all other secure services seem to be working fine, but anything related to apple that requires a secure connection or authentication is having issues.
I have also seen reference to making sure that Itunes is listed as an allowed program in Windows Firewall. I cannot seem to do this because it says that my Windows firewall is being managed by McCafee. I have checked the settings in McCafee, and it appears to me that Itunes, Bonjour, and many other apple programs have been granted "Full" access. As said before in any case I have tried temporarily disabling the firewall and even this did not solve the problem. -
I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.
Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera? -
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
Maybe you are looking for
-
Asynchronous Business Object Event not triggering Workflow
Hello everybody, I created a workflow for processing of inbound messages (IDoc). The workflow is correctly started when an IDoc arrives. Then it prepares some data and runs into a waiting step. After the user processes the messages via a custom trans
-
Need help in changing of Essbase Database
Hello All, I have given task to give few changes in Essbase database 7. I am going to write my task briefly as under... 1- There is already one application created like existing application is XYZ and its data base exist only for HH (AA_TT / AA_TT) 2
-
Wo sind die Fonts in PSE 7 geblieben?
Seit der Neuinstallation von PSE 7 (auf Win 7 64bit) kann ich für die Nutzung von Texten in Fotos nur mehr auf einige wenige Fonts zurückgreifen. In MS Word habe ich keinerlei Probleme sämtliche Fonts sind vorhanden. Auch nach einer De-Installation u
-
Xml file datamodel always the same file
Hello, i have this kind of issue, i configured my ODI in the topology to load an external Xml file that will arrive every day. My load works good but i'm seeing now that ODI doesn't know that the file that i point to with configuration is different f
-
No tag lib found with URI exception
Hi, Im getting the following exception while rendering a jsp. No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file. <%@ taglib uri="http://www.bea.c