8i with glibc2.0 is it possible?

I just want to if its possible to run 8i with RH5.2 or glibc2.0..
anyone did this?
null

Warren (guest) wrote:
: I just want to if its possible to run 8i with RH5.2 or
glibc2.0..
: anyone did this?
As far as I know IT IS IMPOSSIBLE TO INSTALL oracle 8i in
RH5.2.
null

Similar Messages

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

HT201272 connection with itunes is not possible

hello,
because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
how to solve this problem?

Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

I want to transfer my song one mac to another mac, just one or two songs with rating it's possible?

I want to transfer my song one mac to another mac, just one or two songs with rating it's possible?

I am pretty sure the ratings are stored in the main library file itself, not attached to the media files unlike things such as artist and album. They therefore don't transfer with you adding the file to a different library.
Check Dougscripts and see if there is a script that helps with this. One solution would be to perhaps temporarily borrow an unused tag field such as grouping and have Dougscript "place this in that" put a copy of the rating in that field, then transfer it to back to rating when you add it to a second library. I haven't done this but it might work.

Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?

Hello!
Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?
Regards
Peter Polz

Hello!
Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?
Regards
Peter Polz

With iphoto it is possible to order more than one book at once?

With iphoto it is possible to order more than one book at once? If yes, what can it be done? Thanks

thank you! Another question regarding iphoto. I would like to disable the 'faces' feature as I don't use it nor wish to use it and I feel it slows down the program when I import a large quantity of pictures. How can I disable this feature?

My apple account is disabled, please help me deal with as soon as possible!

My apple account is disabled, please help me deal with as soon as possible!

Change the password, but did not receive the letter to change the password

Interactive report search field with autocomplete , is it possible ?

Hi all,
As you know the APEX provides an in-built search for interactive reports . I would like to know if its possible to add autocomplete feature to this ?
Thanks & regards
Umer

Its nor working for me .
1) I created an textfiled item- P2_REPORT_SEARCH
2) added an interadctive report with the source as
SELECT * FROM (
select "WSR"."ID" as "ID",
"WSR"."USER_ID" as "USER_ID",
"WSR"."FROM_DATE" as "FROM_DATE",
"WSR"."TO_DATE" as "TO_DATE",
"WSR"."ACTIVITIES" as "ACTIVITIES",
"WSR"."PROJECT" as "PROJECT",
'delete' from
"WSR" "WSR"
where
("WSR"."USER_ID" = NVL(v('APP_USER'),USER) OR NVL(v('APP_USER'),USER) = 'ADMIN' ) AND (
"WSR"."FROM_DATE"=to_char(sysdate+ (2-to_char(sysdate,'D')))
where (
instr(upper("USER_ID"),upper(nvl(:P2_REPORT_SEARCH,"USER_ID"))) > 0 or
instr(upper("ACTIVITIES"),upper(nvl(:P2_REPORT_SEARCH,"ACTIVITIES"))) > 0
instr(upper("PROJECT"),upper(nvl(:P2_REPORT_SEARCH,"PROJECT"))) > 0
)3) added the folowing query to html header ,
<script>
apex.jQuery('#report_' + pId + '_catch').trigger('apexbeforerefresh', pId);
var l_URL =
'p='+$v('pFlowId')+':'+$v('pFlowStepId')+':'+$v('pInstance')+':FLOW_PPR_OUTPUT_R'+pId+'_';
if (pRefreshMode) {
if (pRefreshMode === 'current'){
// do nothing to url here
} else if (pRefreshMode === 'reset') {
l_URL += 'reset_R_' + pId;
} else {
if (!!pSort) {
l_URL += pSort+'::RP&fsp_region_id='+pId;
} else {
l_URL +=
'pg_R_'+pId+':NO&pg_max_rows='+pMax+'&pg_min_row='+pMin+'&pg_rows_fetched='+pFetched;
l_URL += ':NO::P2_REPORT_SEARCH:' + $('#P2_REPORT_SEARCH').val();
var lRequest = new apex.ajax.url(l_URL,
function(pResponse){
var l_s = pResponse.readyState;
var l_Id = lRequest.report_id;
if(l_s == 1){
}else if(l_s == 2||l_s == 3){
}else if(l_s == 4){
var lTemp = $u_js_temp_drop();
apex.jQuery('#report_'+l_Id+'_catch').attr('id', 'report_'+l_Id+'_catch_old');
apex.jQuery(lTemp).html(pResponse.responseText);
apex.jQuery('#report_'+l_Id+'_catch_old').replaceWith(apex.jQuery('#report_'+l_Id+'_catch'));
apex.jQuery(lTemp).empty();
apex.jQuery('#report_' + pId + '_catch').trigger('apexafterrefresh', pId);
}else{return false;}
lRequest.report_id = pId;
lRequest._get();
return;
</script>
4) a dynamic action:
>
Name: Instant Search
Event: Key Release
Items: P2_REPORT_SEARCH
Condition: No Condition
Action: Refresh
Fire when event result is: True
Selection type: Region
Region: WSR(Interactive reoprt region)5) When I enter the query in P2_REPORT_SEARCH , no change happens in the result set of IR
Edited by: Nice1 on May 16, 2012 1:12 AM

Is RDC integration with Lotus notes apps possible using CR XI and lotus 8

Hi,
We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component.
Background (on how it has been implemented using CR 6 ) :-
i) Lotusscript generate few CSV file and pick a .RPT file from profile doc and places it under one folder on local machin (say x).
ii) RPT file is designed to pick data from CSV file using system DSN (data source).
iii) Data source (system DSN) has been configured with folder (x) that contains CSV and RPT file .
iv) Crystal report control object has been embedded in the lotus notes form and lotusscript code gets handle of control object and opens the report (RPT)file .
We have set up all neccesary environment and trying to implement above functionality using RDC component but when we are embedding the crstal report report viewer in a lotus notes form , it throws an error "An error has occured while processing a request on an object".
Please let me know if it possible using RDC or can anyone suggest me some other alternatives .
TIA

Hello,
You should be able to use the RDC in Lotus Notes. There are significant differences between the object model for the old OCX (crystl32.ocx) compared to the Report Designer Component (RDC) and it's components, the craxdrt.dll, crviewer.dll, etc.
I was able to find an older document that shows how to integrate CR9 into Lotus Notes: "[Using the Report Designer Component (RDC) in Lotus Notes|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50ce64b3-241f-2b10-b792-9685d3815a21]". You can use this as a starting point to compare with your code.
The RDC object model hasn't changed much since CR9, but some of the runtime component references in the document may need to be correct (e.g. craxdrt.dll for v11.x vs craxdrt9.dll for v9.x).
It is worth noting that the RDC has been retired with the release of CR2008. CR XIR2 (v11.5) is the last version of Crystal Reports that uses the RDC. The suggested migration path is to move to the Crystal Reports .NET SDK. This means you'll have no upgrade path with a v11.x application.
Sincerely,
Dan Kelleher

Movie with alternative version(s) possible

Hello,
have made a movie from several clips. Now I want to make a second movie from the same clips but as shorter version. Is that possible? Must I again import the clips…?

Hi Rawe,
Welcome to Apple Support Communities.
It sounds like you want to duplicate your project, so you can make another version of it without starting over from scratch. The article linked below will walk you through that process.
iMovie '11: Duplicate a project
http://support.apple.com/kb/ph2178
To duplicate a project:
In the Project Library, click to select the project you want to duplicate, and then choose File > Duplicate Project.The File menu appears in a light gray bar across the top of your computer screen.A new project is created and is listed above the original project. It has the same filename as the original, appended with a number.
Double-click the name and type a new one, if you want.
Cheers!
-Jason

Address Book sync with lotus Notes is possible

Hi,
I'd like to know if it is possible to sync Personal Address book with lotus notes?
Or there are Ip phone services that can query address book of lotus notes?
Regards
MC

I developed an application for a German customer who is using Lotus Domino too.This application should be accesed through Services button on IP Phone This application queries Domino directory or Notes Personal Address Book via WebServices and displays results on IP phone. You can find a User Manual in german on my website http://www.arsnet.eu/workshop/iBOS20-Cisco-DE-pptA4.pdf . I can develop this Application in English too.
Regards, Robert

Processing Binary files with Mapping NOT (always) possible ??

Hello All,
I need your help solving this strange behaviour of XI.
I am developing a (image)file to (image)file interface with a simple mapping but XI is giving unpredictable results.
Processing the same inputfile e.g. 10 times after each other: results in 6 times OK and 4 times errormessage in SXMB_MONI. After restarting the 4 errormessages sometimes 1 or 2 msg are suddenly processed fine ??!!
The given error is always: "Parsing an empty source. Root element expected!". But why are the
other 6 messages are processed OK ? Why not all the 10 messages returns with error ??
My scenario is :
1) File FTP Sender: pick up image-files (.gif) from FTP-server (30.000 per day)
2) XI mapping: A) via Java program convert file into Base64, otherwise no mapping is possible at all
B) via UDF fill few outputfields only using the inputfilename. There is no need to go "inside" the
inputfile; just get the filename using Dynamic Configuration.
3) File FTP Sender: After message processing store the inputfile on the SAP filer in a particular
directory derived from the filename. Creating the directory and moving the file is done by an OS script in the sender file adapter.
4) XI Receiver HTTP: after succesfull processing the payload is filled with the correct fields.
The cause of error is (sometimes) using the DynamicConfiguration in the UDF, but a few fields must be filled using the inputfilename.
Has someone experienced this before or an other solution/idea to make this scenario stable and robust ??
Regards,
Jack

Jack,
I may not have understood your scenario in full, however, an alternate solution could be to write a custom XI module and attach it to the file adapter. You could access the file name inside the module as well(See SAP Note 819761).
You should get a lot of articles/blogs in SDN on custom XI module creation and deployment to the server via NWDS. Give a thought on these lines as well.
Are you using any third party APIs to base64 encode your files, If so i beleive you will have to include them in the librarries in NWDS and deploy them to the XI server.
Thanks
Saravana

Logic Express 9 running with Tascam US-122 - possible?

Hello,
I've been scouring support forums and the Logic user manual all day and unfortunately cannot seem to find an answer to this:
Is it at all possible to run Logic Express 9 with the Tascam US-122?
I've just converted from PC to Mac in the last couple of weeks: all of my software and drivers are all up-to-date so that should not be an issue. Obviously that means that I've previously been using my Tascam with Cubase on the PC, and I was really hoping it would cope with Logic too. The problem is that Logic does recognize the Tascam but when it comes to recording, I can't get it to work. Apparently it's something to do with the sample rate?
Please help - if it can be avoided, I don't want to have to buy another device. Any advice or answers would be very much appreciated!
Thank you.

It sounds like you have the same setup as us.
I (oops, wife) has a brand new iMac, a Tascam US-122L and a Yamaha KX8 controller. She started with GarageBand, then bought Logic Express 9 and just yesterday we ordered the upgrade to Logic Studio.
Like any new computer setup of course nothing worked right away.
She plugs her guitar into the Tascam but it didn't work until we changed to Input 2 in Logic (or was it GarageBand, sorry I am getting them confused).
Anyway, my point is that you should not need any more hardware to make it work. We have yet to plug a mike into the Tascam...that will be the fun for the weekend....lol
Good luck,
Paul

Return Order Creation with Multiple Lines not possible - 7.0 to EHP3

Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order, the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit

>>. But is it possible in PI 7.0?
Just few cents..
Test using SOAPUI or XMLSPY and use that same WSDL URL in the target URL of Communication channel. Just to make sure you use the right endpoint.
or
You can specify the method name as soap action dynamically using udf in mapping and see how it behaves.

8i with glibc2.0 is it possible?

Similar Messages

Maybe you are looking for