8mm super video to iMovie

Hi. Wondering if someone can help me find instructions on how to import video from my Sony 8mm to my Mac.

It is strange that ADVC-300 is not in their current product line on their website. Do you know if they have replaced it with a newer model?
Grass Valley has "dropped" ADVC-300.
In discussing this issue with my other video friends we have found nothing as good as the Grass Valley ADVC-300.
These units are still available on Amazon and eBay.
I've played around with countless other conversion systems, ranging in price from $79 to $399. Short verison, this is the ONLY unit to own. No dropped frames at all, even with questionable quality tapes, no jitter, great color, excellent sound quality. Zero setup with iMovie 06 and iDVD 09/11.
This is a prosumer deck. The time code function is alone worth the price if you have old analog footage. Absolutely NO "Out Of Sync" audio.
ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey but it WORKS.

Similar Messages

Getting Analog Video into iMovie

Greetings,
OK, so I have successfully imported digital video into iMovie on several occasions with my "newer" video camera (a SONY DCR-TRV80).
Problem is, I have and older camera (a Canon ES800A) that uses 8mm tape. I've been wanting to get rid of the camera (a nice one for it's time) but, I have about 6 tapes worth of video that I'd like to at least permanently archive.
I suspect there is some hardware device out there that will allow me do to this - can anyone tell me would I need to be shopping for? (hoping it's not prohibitively expensive!)
Any help would be appreciated!
Next up? - a camcorder with a hard disk!
Thanks,
Jim

Hi : I have a related problem maybe you could help me with....I've got about 6 Beta tapes [ remember them ? ] that I'd like to transfer to DVD while there still viewable. About 4 hours of tape on each....
I have an Optura 20 DV [Canon] and a Beta tape machine. The optura 20 manual says you should be able to run the RCA plugs out of the Beta unit into the AV jack on the Optura, then FW out into I - Movie. OR you can record onto a DV tape, then into IMovie. I've had no luck with either method. No Beta material shows on the DV monitor no matter what I do. It does play into a standard T.V from Beta, so I know the tape AND the Beta machine are working.
Do I need something like that Canopus Converter ? ....don't know if that' s the exact name .
Any suggestions appreciated...Thanks
Braden

Importing DVD video to iMovie

I am a novice at video. I have DVDs of 20 year old 8mm Camcorder video that I want to edit in iMovie. I am using HandBrake to make mp4 movies which I can then import into iMovie. But it takes hours for HandBrake to encode the mp4 files and then even longer for iMovie to make thumbnails even of just a few minutes of video. What am I missing? There must be an easier way to do this???.

You are using the wrong application. Download either mpeg streamclip (free) + the quicktime mpeg2 component (~$20) or just DVDxDV (~$25) to convert the VOB files on the DVD to DV-NTSC quicktime files.
x

Cannot see video in iMovie

This is my first time ever using iMovie so I'm hoping this is super easy. I'm using iMovie 11 in Lion. Ok so I imported an .mp4 video to iMovie and can play audio but I can't see any video. I just want to cut about 3 small clips from a big 20 minute video and put them together. I thought it would be simple, but how do I get the video to show up?

What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
If your analog video device does not support device control, turn off device control. To do this, choose Preferences from the Edit menu, click the Device Control tab, then make sure the checkbox next to Enable Device Control doesn't have a checkmark in it.
Sue

Importing DVD video into iMovie

I am a novice at video. I have DVDs of 20 year old 8mm Camcorder video that I want to edit in iMovie. I am using HandBrake to make mp4 movies which I can then import into iMovie. But it takes hours for HandBrake to encode the mp4 files and then even longer for iMovie to make thumbnails even of just a few minutes of video. What am I missing? There must be an easier way to do this???.

I got everything to work using the Disk Utility except I didn't get any audio imported to iMovie. Funny thing is when I use DVD player to play the mounted image, it plays both video and audio perfectly. I just can't get the audio imported properly into iMovie 08.
Any idea?

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

MPEG4 video from imovie is sluggish and audio out of sync

Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min long

OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt

Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

I totally understand.
Check some things from here, I have 2 and they have been great so far.
Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
Clean off your on the G5 drive and off you go.
I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
http://eshop.macsales.com/search/elite+pro
You can talk to a person for REAL advice, Phone: 800.275.4576 Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
Quick delivery and willing to help.
Hope this makes you back up and running :-)
Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
All the best

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can I get idvd?

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available

Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT

How do you save your videos in iMovie to a different location on your computer?

Since i upgraded to OSX Mavericks imovie keeps switching itself off when trying to export video to DVD.
Genius Bar told me i need to save my videos first then delete imovie and then download imovie from the app store.
How do i save my videos in imovie to a different location on my imac so i can then delete imovie????

Copy the iMovie Library. It should be in YourUserFolder/Movies/iMovie Library. See iMovie (2013): Work with multiple libraries

I have my home videos on imovie. How do I get them to idvd so I can burn to a dvd?

I have my home videos on imovie. How do I get them to idvd so I can burn to a dvd?

Export to the camera roll, then import them to your comuter as you would any photos or video from your device:
https://discussions.apple.com/thread/3994426?tstart=90

Is there a way to create a picture from video in iMovie 11

Is there a way to create a jpg picture from video in imovie?
I have noticed several work arounds which are not so easy. This was previously a feature that was very helpful to put in stills in the drop zones in idvd from your video project. Only makes sense. Why has it been removed?

See my post here.
https://discussions.apple.com/docs/DOC-3231
We are all just users here. Nobody knows why Apple includes features or not.

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Download and import YouTube videos to iMovie for editing

Download and import YouTube videos to iMovie for editing
YouTube always provides people with raw video materials on all sorts of things happened worldwide in real time. Video lovers are fond of downloading these files as private collection, even using video editors like iMovie to do further editing of their favorite ones, so as to import them to portable devices like iPod, iPhone, PSP, Blackberry, etc. for playback, or upload to their own websites to share with others, or do something else as they like.
However, not all the people have found a proper way to download YouTube videos, not to mention how to add these files to iMovie for editing. YouTube videos are in the format of FLV, which is not a workable format in iMovie, so if you want to import YouTube videos to it without trouble, you should convert FLV files to iMovie compatible formats such as MPEG-4 and MOV in advance. With the special intention of solving these two problems, this guide will show you how to download YouTube videos and import them to iMovie for editing step by step. If you are in need, just feel free to go along with it.
Step 1: Download, install and run Pavtube YouTube Converter for Mac
This converter can process downloading and conversion simultaneously. Once you launch it, the interface below well pop up.
Step 2: Add URL, select output format and set save path
Press tag “Add URL” in the above interface, and then the following window will appear. Just copy and paste the URL of the YouTube video file which you want to download and convert to the text box after “URL”. Then select a supportable format for iMovie by clicking the drop-down list of “Convert To”. Here I choose MOV for example.
Afterwards, you can insert the storage file name in the text box of “Save As”, if not, the program will generate one automatically. Here I save my file as “mycollection”. Meanwhile, you are allowed to hit “Browse” in the opposite side of “Save To” to specify the destination folder. By the way, if you want to save the original FLV files, you are allowed to tick the checkbox “Save FLV File” to achieve this goal.
Step 3: Custom
This program enables you to adjust video and audio parameters like codec, bit rate, aspect ratio, frame rate, sample rate, and channels, so that you can change them randomly according to your own demands. Generally speaking, the options which refer to values are always in condition of the larger values, the larger file size, but better quality. Do remember click “OK” to save your custom settings.
Step 4: Download and convert
Once all the settings are done, you can click “OK” button to start. The following window will show you the progress of downloading and conversion.
Step 5: Import the output MOV files to iMovie
As soon as the YouTube video files have been downloaded and converted to MOV or other iMovie workable format, you can click “Open” at lower right corner of the above interface to find out the output files. Afterwards, launch iMovie, and click File > Import to add the output files to iMovie for editing.
Tips:
1. This program supports batch tasks so that you can download multiple YouTube video files in batches at a time.
2. Pavtube YouTube Converter for Mac adopts multi-threading technology, which makes its download speed is faster than any other similar YouTube downloader.
3. Besides YouTube.com, it can also automatically detect and download online videos in the format of .flv, and f4v from many other video-sharing websites, like Yahoo Video, Myspace, Google Video, Fox and more.
4. It also provides users with conversion function, with which you can convert any YouTube FLV/F4V files to other formats like MP4, MKA, WAV, AC3, MKV, FLV, MP3, M4A, 3GP, AVI, MOV, MPG, etc. at will.
5. If you only use it as a YouTube downloader without format conversion, you can take it as a piece of freeware.
All right, this guide is ending up now; hope it will do you a favor while downloading video files from YouTube as well as importing them to iMovie for further editing.

It's a clip from CNN (with all credits etc. added). When one refers to it as a clip posted on "YouTube", then people understand the quality will be poor.
I've watched television go from everything shot on a tripod with clean, meticulous editing rules, to almost anything goes. It has to do with cultural reference.

How can I import iphone 4 videos to iMovie 09?

I tried different ways to import my videos from iphone 4 (.mov) to iMovie 09 but I had no success. I transfer the video to my iMac using image capture, then try to import the video to iMovie, but seems iMovie does not recognize the video format .mov from the iphone 4. Can anyone tell me how can I do this?
Thanks a lot for the help

I have no problems with iphone 4 video, have you edited it on the phone or anything.

8mm super video to iMovie

Similar Messages

Maybe you are looking for