9.0.1 touchpad scroll failure

Synaptics touchpad displays the scroll icon but does not move Firefox page. Works properly with MS word & excel.

Wanted to give an update of my progress today.
I again began with a clean installation of 9.0.0.  Brought up the CF administrator and completed the installation.  From there, I went directly to installing the 9.0.1 update and the 9.0.1 hotfix.  To my amazement, the cf administrator came up with an issue. But . . .
I then went into the administrator to install my 'customizations' (i.e. my datasources, my SMTP mail server, my custom tags, etc).  Truly nothing unusual.  Almost sad to say - vanilla.  I then shut down the service as recommended to have some of the changes 'take effect'.  Boom, the cf administrator no longer appears but gives me the blank screen and the same error messages I have listed in my first note.  So again, it must be "something either I turned on/off incorrectly, but don't even know where to look".
Would this be considered a bug?
Libby H

Similar Messages

  • Lenovo G510 touchpad scrolling not working in windows 7

    I have a windows 7 - 64 bit operating system on a Lenovo G510
    I have installed Touchpad driver for windows 7 from Lenovo site but i found very annoying problem which is the touchpad scrolling function not working .....
    Please Help
    Solved!
    Go to Solution.

    hi Shady710,
    Welcome to the Forums.
    If you have a Synaptics Touchpad, can you check if you have a One Finger / Two Finger Scrolling feature under Mouse Properties.
      - Link to picture
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I can't use touchpad scrolling in webpage tabs when a PDF tab is open in Firefox 4

    When using Firefox 4, if I have a PDF open in a tab (using the Adobe Reader 9 plugin, whatever the latest update was), I can't use my touchpad scroll in other tabs until I close the PDF tab. I can scroll fine in the PDF tab. This is on a HP laptop, the touchpad is made by Synaptics. Did not notice this problem in Firefox 3.6.

    I have this problem and have found a bug:
    https://bugzilla.mozilla.org/show_bug.cgi?id=626813
    If you have this problem, please comment on the bug with your OS version (Windows 7 64-bit, for example, or Windows XP, 32-bit) and who makes your touchpad (Device Manager -> Mice -> "Touchpad Maker" Touchpad).

  • When a PDF is opened in a tab, my laptop's touchpad scroll stops working for other tabs. (But works perfectly fine on the pdf tab or with every tab after closing the pdf tab)

    My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
    After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.

    Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
    Reader 9 is installed on my Win7 Starter.

  • Why doesn't FireFox support touchpad scrolling of pages. This is very annoying!!

    Glaring shortcoming in ease of use in not supporting ALPS touchpad scrolling on a laptop computer w/ Windows 7.

    Philipp,
    What you say works for me on Windows but not on mac. On windows, firefox plays h.264 encoded html5 videos using system's inbuilt decoders. But same does not seem to be true for mac?
    More details:
    - Tried this on mac 10.7.4 and 10.8.4, firefox version: 22
    - Both give a warning message in error console: "Content-type" of "video/mp4" is not supported.
    - Exactly same content type works on FF on Windows
    This is how I am using video element in my page:
    <video src="/sample.mp4" class="vid" width="550" height="400" controls autoplay />
    Any info on this?

  • NB100 touchpad scroll bar stops working after exit full screen mode youtube

    I have few Toshiba laptops, satellite, and now netbook100.
    All of them share one problem, touchpad scroll bar:
    It will stop working after exit full screen mode in youtube.
    Here is how to reproduce the incident:
    1. using any mainstream browser, start playing a youtube video, click full screen button at the bottom right corner of the video.
    2. click on the [cross] to exit the full screen mode. (next to full screen button.)
    3. check if you scroll bar still functioning.
    4. a reboot will restore the function.
    Currently, Im on vista, I believe in XP you will have the same problem.
    Searching in google (touchpad scroll bar stops full screen youtube) will return more people share the same question but no answer.
    Environments: win xp all, win vista all.
    Windows all most updated driver, touch pad driver up to date.
    This is not a major tech problem but for a netbook, this is very annoying.
    If anyone have this problem or answers, please share it here.
    Thank you in advance.
    regards.

    I had the exact same problem on my laptop and after a lot of searching, I finally found the simplest solution that really works for me so here goes:
    Once you exit the full screen video and the scroll pad has stopped working, click once anywhere on the youtube page(just to unfocus from the video) and press the spacebar button on your keyboard twice.
    Et voila, your scroll pad should be working again. Beats the hassle of having to log off everytime.
    Hope this helps

  • The touchpad scroll doesn't work in visual studio?

    Hello,
    As I mentioned in the title, the touchpad scroll doesn't work or affect visual studio community. The scrolling works very well with other software but it doesn't with visual studio community. This same button worked with VS 2010, VS 2012 (It stopped sometimes
    but still functioning correctly most of the time), and stopped with 2013 versions. Why? 
    Take a look at the video to see the problem in action: http://youtu.be/Qt20pM6ZQAo
    Thank you for your comments!

    Scroll button on what? Are you using a mouse with a scroll wheel, or is this a laptop touch pad?
    If the latter, please read here:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/295553a2-80c0-4608-8b57-32c0422de3d4/visual-studio-2013-community-touchpad-scroll-doesnt-work?forum=visualstudiogeneral

  • FIREFOX 13.0.1 LOSES ACER LAPTOP TOUCHPAD SCROLLING

    ACER LAPTOP TOUCHPAD
    Installation of Firefox 13.0.1 no touchpad scrolling feature
    tried options/advanced autoscrolling etc
    still no scrolling using touchpad

    What is the solution for this? Should I downgrade Firefox to an older version?

  • TouchPad scrolling on the latest VMWare Workstation

    It's been 8 years since I tried to make scrolling work in VMWare workstation! (Since 2004).
    AND it's still not implemented !!
    in VirtualBox it works just perfectly, why don't you guys just rip some code off VirtualBox?
    check this link:
    http://communities.vmware.com/search.jspa?resultTypes=&dateRange=last90days&peopleEnabled=true&q=touchpad+scrolling&containerType=&container=&containerName=&username=&rankBy=30&numResults=30
    there are lotsa threads with a similar problem.
    I believe this problem should have VERY high priority due very high percentage of users just moving to VirtualBox from VMWare.
    *BASIC* scrolling for touchpad is not so hard to implement..

    take a look here:
    https://www.virtualbox.org/browser/vbox/trunk/src/VBox/Devices/Input/DevPS2.cpp
    in particular:
    557    /**
    558     * Send a single relative packet in 3-byte PS/2 format to the PS/2 controller.
    559     * @param  s               keyboard state object
    560     * @param  dx              relative X value, must be between -256 and +255
    561     * @param  dy              relative y value, must be between -256 and +255
    562     * @param  fButtonsLow     the state of the two first mouse buttons
    563     * @param  fButtonsPacked  the state of the upper three mouse buttons and
    564     *                         scroll wheel movement, packed as per the
    565     *                         MOUSE_EXT_* defines.  For standard PS/2 packets
    566     *                         only pass the value of button 3 here.
    567     */

  • G50-70 touchpad/scroll?

    I have some issues with touchpad scroll option, like there`s no one finger scroll option as most laptops have it, latest drivers TouchPad Driver (Elan, Synaptics) 17.0.14.74/11.4.31.1 are installed on windows 7 x64 with no errors and works ok .. but, it confuses me when I looked:
    http://tinyurl.com/mmzdnue
    ..so, where is the one finger scroll option?.. is there any older driver with that option?
    thanks for any advice!

    I'm having the same problem.
    Every once in a while, my touchpad just goes crazy. I've had the laptop for 3 months and it's been doing it since the first day. I haven't had a chance to send it in to have service techs look at it yet because I need it for school, but it's really starting to become a problem.
    When the erratic movement starts, I can touch the pad to try to move the pointer to a certain location, but the pointer just goes crazy. And it usually ends up zooming in on whatever program/website I am using.
    Reinstalling the touchpad driver did nothing to help the problem. In fact, as I just tried to move my pointer to "Post," it happened again!

  • Yoga ThinkPad Touchpad Scrolling Issue after Windows 10 Upgrade

    Yoga ThinkPad upgrade to Windows 10.  My horizontal area at the bottom of the Touchpad scrolls the screen up and down, and the right vertical area of the Touchpad scrolls the screen left to right.  The reverse direction choices only reverse up/down or left/right and not how the horizontal/vertical areas operate. Did anyone else experience this?  Thanks.

    Good day.
    Could you clarify which model Yoga laptop you have, please?
    Regards.

  • Touchpad scroll gestures not working in windows 10

    Hello,I have a HP Envy laptop and my laptop's touchpad scrolling gestures are not working since I updated my windows operating system from windows 8.1 to windows 10. Please help me out!

    Hi : Did your scroll setting stay after you rebooted?  I gave the same advice yesterday (see post below) and the one guy said the setting gets erased on every reboot. http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Synaptics-touchpad-doesn-t-scroll-after-Windows-10-upgrade/m-p/5173105#M126701 I could not say yea or nay because I rolled back my notebook to W7 due to the fact that it could no longer screen mirror to my smart TV (either the TV needs a software update, or W10 has a bug) and I can't remember if I had used the notebook scrolling feature again in W10 after I had turned it off.  

  • HP G62 touchpad scroll not working after Windows 10 update

    Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10.  I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port.  Can you please provide information on how to fix? Best,  

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad. 
     1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

  • Portege R500 upgrade to Win 7 64 bit: touchpad scroll lost and no driver

    Dear All,
    I have upgraded the OS of my portege R500 to WIndows 7 64 bit and had the following problems:
    1. At first the touchpad scroll worked fine (with no driver installed) but then it stopped working .... so I looked for a driver but
    2. There are no driver for the touchpad (Alps) that is recognized as a PS compatible mouse
    BTW uninstall and reinstall did not work, and I have searched a lot through the web but found no solution.
    I have downloaded the drivers for VISTA 64bit, is it safe to use?
    Any hints appreciated, thanks.
    Simone

    Hi
    >I have downloaded the drivers for VISTA 64bit, is it safe to use?
    Yes, its safe You can try to install touchpad drivers for Vista in worst case you will get a error message that this driver is not compatible or will not work.
    But listen dude there are Win 7 Alps and Synaptics touchpad drivers for Win 7.
    The drivers have been released for other notebook series.
    Check the Satellite L500 area for example
    I found Win 7 64bit drivers:
    Synaptics v14.0.11.0
    Alps Electric v7.x5.303.117
    Greets

  • Cant get the laptop touchpad scroll feature to work in latest Firefox version

    Since installing version 4 of Firefox the touchpad scroll function has stopped working. All other programs continue to scroll correctly and the touchpad driver is uptodate (Lenovo UltraNav).

    Try this: <br />
    Type about:config into address bar, hit enter, Firefox would ask if you want to access the settings, say yes you know the risk.
    When the list of configurations come up, type '''trackpoint''' into the filter area, you will see a '''ui.trackpoint_hack.enabled''' setting, change that from -1 to 1. Now you should be able to scroll using trackpoint and middle mouse button on the trackpad again.

Maybe you are looking for

  • How to play .wav file from url in iphone.

    We are using callfire API for in our iPhone application(Hybrid application build using sencha and phonegap). The concept of the app is to show the recorded calls in a list and on click of any call in the list it will play the recorded audio file(.wav

  • Sharing libraries between user accounts question

    After many years of having one user account on our iMac, I have decided to segregate user accounts for me and my wife. I'm doing this because I have an iPhone and she is going to get one soon. When we sync our respective iPhones, we want to keep iCal

  • How to write or paste words with cyrillic font

    Hi all, I am having a difficulty in write and paste words with cyrillic (russian) font. currently, I am using acrobat 7 standard and windows 7 professional 64 bit. anyone can help me out? thanks.

  • Variable that keeps filename - LSMW

    Hello! I'm trying to see which variable keeps the filename uploaded to LSMW in the specify files step. Does anyone knows the name of the variable? Thanks    RT

  • Regarding conversions

    Hello, "I wish to code the number conversion from decimal to binary. Conversion should be of any number which is with/without minus sign and with/without decimal part. Please guide me."