9/18/13 Software Update - WiFi Issue

I downloaded the latest software update (9/18/13) and now my macbook from April 2009 will not find or connect to any wi-fi networks. Other devices in the house including ipads, iphones and a new macbook air are connected and working fine. Tried restarting my router but nothing still....HELP!

Can you provide your model of W520?
Is your Nvidia graphics one of the following:
NVIDIA NVS 4200M              NVIDIA NVS 4200M
NVIDIA Quadro 1000M         NVIDIA Quadro 1000M
NVIDIA Quadro 2000M         NVIDIA Quadro 2000M
===
DETERMINING WHICH VERSION IS INSTALLED
1. Select Start.
2. Right-click/Press and hold Computer, and then select Properties.
3. At the left pane, select Device Manager.
4. Double-click/Double-tap the Display adapters category.
(NVIDIA Graphics Driver)
5. Double-click/Double-tap either of the following devices.
       NVIDIA NVS 4200M
       NVIDIA Quadro 1000M
       NVIDIA Quadro 2000M
6. Select the Driver tab.
7. Check Driver Version via the driver details tab. You probaby have the Lenovo version
8. Click the update driver tab. Search automatically. Update the version windows(online) wants to use.
  9. State this version.
==
More than likely NVIDIA has issued a newer version, via windows, then what Lenovo is aware of.
Lenovo with have to change SU .xml logic to deal with this.
==
This is just to help someotherguy provide a Lenovo solution.
Hiding the SU offering is the best solution. Lenovo normally does not retrofit SU.xml due to newer release showing on Windows update via another vendor.

Similar Messages

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpaulding

I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding

Most recent software updates and issues with XP servers

My company had issues with the June 2006 software updates to the Macs and resulting incompatibility with an NT server. I am curious if anyone knows of any issues resulting from employing the most recent software updates to Macs and any compatibility issues then arising with XP servers.
G4 40G iPod Mac OS X (10.4.3) jacked up G4 533

no answers found

Software Update Reporting issue

I have deployed a software update group in a collection. When I check the deployment status from Monitoring - Deployments Node getting 78 % compliance but
if I check the enforcement deployment states from Monitoring - Reporting - Reports - Software Updates - C Deployment States - States 1 - Enforcement States for a deployment report getting all together different numbers there are only
5% computers are showing as Compliant, and rest Computers are showing in Enforcement state unknown. Please help on this issue.

Hi,
Have you reviewed the following logs on the unknown computer.
UpdatesStore.log
UpdatesHandler.log
WUAHandler.log
WindowsUpdate.log
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IMovie version 10 and software update - an issue

When checking 'Software Update' within Mavericks why does iMovie v10 continually keep coming up as an install - when it has been installed?

It does sound like something must be misconfigured somewhere (or corrupted).
I did a little digging, and found some documents about trouble-shooting this problem with older versions of OS X.
You might work through the suggestions and trouble-shooting steps to see if any of them help to pin-point or repair the problem.
http://docs.info.apple.com/article.html?artnum=106291
http://docs.info.apple.com/article.html?artnum=107299
http://docs.info.apple.com/article.html?artnum=25725
http://docs.info.apple.com/article.html?artnum=107136
http://docs.info.apple.com/article.html?artnum=106695
The one about "pinging" the server first might be an interesting thing to try.
Let me know if anything proves helpful or causes it to work.
It could be an isolated bug, or just a corrupt file.
Unfortunately, the only way to re-install just the Software Update would be if Apple had recently released an update just for that program. But, I haven't seen one of those since OS 10.0.
They have wrapped an update for it into many "Security Updates". But, at this point all of those are going to be older than 10.4.7.
Hope this helps.

10.6.5 Security update WIFI issues

Everything was fine until I received a 10.6.5 Security Update. Now I don't have any WIFI. I've done everything as far as resetting all settings, etc. No issues with router as it works fine with other devices. Any suggestions?

I am having the same issues. I'm not sure that the update was what caused the issues but it seems to have made it worse. I can get it to connect for a minute up to sometimes 30 min. Once it drops the connection I cannot get it to re-connect and the MacBook cannot see any of the networks in my neighborhood.
I have reset permissions, reset the PRAM, run all daily, weekly, and monthly scripts, and run just about everything on Onyx that I think would fix the issue. I am at a loss.

Software updates networking issue

every time i try to update my software,
the bar gets about three quarters of the way and gives me this message
"None of the checked updates could be saved
A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
now i have 12 updates needing to be downloaded including os x 10.5.3

I had the same problem when trying to update to 10.5.3. You can download the 10.5.3 update from apple's website, apply it, and see if you still get the -3001 error for the other updates.
http://www.apple.com/support/downloads/macosx1053comboupdate.html

IPhone 4S and this iOS 7.1 update - wifi issues

Well first it happened to my wife's 4S on iOS 6 updates, and now me on iOS 7.1 update - lost the wifi capability on my 4S too. I've looked through the various posts on these forums of people suffering the same problem over and over and over again. "Mr Apple" if these updates are not compatible with certain devices then at least have the common decency to tell us so. I for one have had enough of sticking iPhones in the freezer every other day, and I'm certainly not going to do that with two broken 4S's now. So I'm off to the Samsung store to buy a Galaxy..... nuff said......

Hi,
I have an IPhone 4 and I updated it to IOS 7.1 about a week ago and since this update the IPhone keeps on rebooting every time I use apps such as Facebook, Twitter or Whatsapp. It is very annoying to see your IPhone reboot twice or more times a day while you are working and it seems that a plausible solution is to go back to the previous version of IOS. If you have a different solution, please let us know because I'm not the only IPhone user with this problem. Thanks!

TS3623 Apple TV 5.1.2 update, WiFi issues? Keeps dropping wifi, constant buffering?

Apple TV 5.1.2 update constantly drops wifi connection, buffers and hangs? Very Annoying!

I am not sure that this will help you but i let you know how i solve it:
Problem: iPhone 4 doesn't detect wi-fi networks after installed iOS 5.1
My iPhone stopped finding any network once i update it with iOS 5.1, so after read so many posts
around the web about it, and as i really need a wi-fi connection on a daily basis i did the following:
First step:
Reboot
Reset Network Settings
Turn Airplane mode On and Off
None of this steps worked for me
Second Step
Restore iPhone to factory settings, not from backup.
The iPhone detected wifi networks, but once i connected to one of them, after 1 minute
or two, he lost the connection and stop seeing any wi-fi networks again.
Third step
New restore from factory settings, not from backup.
The iPhone detected again the wifi networks, but this time instead of choosing from the list
of wifi networks, i choose to click on "other.." and insert the name of the wifi network and password
manually.
I went to turn off bluetooth as well, since i heard on the web that the bluetooth connection ON, will mess with the wifi on iOS 5.1.
No any problems until now, after 3 days of this procedure.
Probably there is a problem when the iPhone connects to the first wifi network we choose, and the drops everything. But once i make it like i mention on the third step, no more problems.

SCCM 2012 software update point issue

The issue of "detection state unknown" (to simplify, use 'unknown' as below) patch report status
The OS in our environment are mainly Win 7 - 64 bits and XP. The typical condition of "unknown" report patch status is as follows:
1) Workstation with Win 7 - 64bits: "unknown" patch report status is appearing
in MS patches for Win XP or 7 - 32bits
2) Workstation with Win XP: "unknown" patch report status is appearing
in MS patches for Win 7 - 32/64bits
The "unknown" problem appears even client scan is completed in the workstation (see the second picture). The problem may be caused by application bug or configuration. Please
kindly follow up and further seek support from Microsoft if applicable.

WSUS was installed and configured and work fine a few monthes ago as a part of the first try to install SUP before aplying SP 1 to SCCM.
Both SCCM and WSUS are installed on the same server.
now we want to deploy all updates from SCCM SUP, and the installation failed.
after researching online, uninstalled WSUS completely from the SCCM server, and removed SUP from the Site and rebooted the server.
installed WSUS 3.0 SP2, when initial config of the WSUS popped up i canceled it, the only config i made
is at the installation wizard, set the port to 8530, folders location and internal DB.
>> i am able to open the WSUS console and connect to the "localhost" but no settings
are configured.
installed update 2734608, reboot.
Installed SUP.
and here we are.

Nokia Software Updater Connectivity Issues.

Is it me or is there a connectivity issue with the Nokia servers at the moment?
I'm trying to reinstall my phone software after a hardware failure.
Firewalls are turned off.
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!

No, it is all.
It started two days ago.
Edwardquan first reported it.
What a heck.

Nokia 5230 Software update display issue

I have recently updated my Nokia 5230 from 11.0.079 to 12.0.089. After updating handset was working fine. But after sometime the display got currupted. After sometime the display is working again. So the problem is some time the display is working sometime display is currupted. Please provide the resolution for this problem.
Thanks in advance [email protected]

Hey friend,
Even i am facing the same problem but i didn't updated any firmware mine was new,bought it 4months ago.
Earlier my phone is working fine but from past 1week i am getting different display , I couldnt see anything on the screen it is coloured differently depends on the them or wallpaper colour.again after sometime it is displaying normally.
As a work around i am trying to make a call to vodafone customer care & putting finger on my sensor then it may display normally or it may not.
Can some help me out from this issue..........!
Thanks
Pavan
I

Software update causing issues with text message

I updated to 10.2.1.3014 last night and since then my text messages are not showing up in my text message folder on the hub. They'll show up if I select Hub but not when I select Text Messages. Is there anyway I can fix this!?

Make sure your settings didn't get messed up. Go to your Hub and click the three dots in the lower right then follow Settings>Hub Management>Text Messages and make sure "Show in Both" is selected.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

USB tethering stopped working after iMac software update.

Yesterday my Internet was slooooow so I followed a tip to repair disc permissions in disc utility, at the same time I was downloading and installing software update for the iMac. I've always tethered with a USB cord (Bluetooth has NEVER worked with the Mac and phone, but does with the iPad). All the solutions I find one here for this issue give instructions I don't understand (where/how to do them exactly, like iPhone config utility...where?!), and how I'm supposed to download iTunes again on a mac that has no Internet because i can't tether...physically impossible. Very frustrated. I don't understand why software updates are issued that cause problems like this, but no immediate solutions updates are issued after. One top of that, how are we supposed to fix issues when we can't tether and dont have separate Internet (I can't update my iPhone software without a special trip to a wifi hotspot....I live in Saudi Arabia...it's not easy to do that).
Sorry, so many questions. Frustrated. I there a SIMPLE solution out there?!

WillRukMac wrote:
I have the same problem as you... If you solved it can let me know too? Hope someone reply this thread help us!
I've found a post in google - Reregister your I-Phone in I-Tunes.
It worked for me so far.

9/18/13 Software Update - WiFi Issue

Similar Messages

Maybe you are looking for