9.2 MUI .msp file won't update 9.1.3?

I have 9.1.3 installed, and went to run the AdbeRdrUpd920_mui_cum.msp and it says that the upgrade patch cannot be installed becasue the porgram to be upgraded may be missing or the upgrade patch may update a different version of the program. I used all the .msp files to upgrade to 9.1.1 9.1.2 9.1.3, but do i have to use the AcroRead.msi file because it is a 9.2 instead of a 9.1.x upgrade?
Did anyone else have this problem?

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Similar Messages

Index file won't update on server

I have changed &amp;amp; uploaded mjy index.html file
many, many times with no problem. Now I have another update
&amp;amp; when I upload it with either Dreamweaver or
GoDaddy's FTP it does not update the file...even though I get no
error message.
I even created a new index file using the exact same script
as what is currently loaded...only changing a couple words...but it
still will not update. It says the file on the server is dated 2/6
(today), but it is not the file I just uploaded.
Edit: The site is at www.webrevamps.com
I will attach the new code that won't stick on the server. To
make it simple, all I changtyed from the code that shows on the web
is I changed the title to "WebRevamps.com & added
"Hello Me" next to "Hello
World"
Any suggestions?

>>Any suggestions?
Clear your browser cache?
Walt
"Motleyscrew" <[email protected]> wrote in
message
news:fod68r$9ip$[email protected]..
>I have changed & uploaded mjy index.html file
many, many times with no
> problem. Now I have another update & when I
upload it with either
> Dreamweaver or GoDaddy's FTP it does not update the
file...even though I
> get no
> error message. I even created a new index file using the
exact same
> script as
> what is currently loaded...only changing a couple
words...but it still
> will not
> update. It says the file on the server is dated 2/6
(today), but it is not
> the
> file I just uploaded. Any suggestions?
>

.lbi bug?...lbi file won't update pages...lbi link broke

Greetings,
I have an lbi file used as a menu in DW CS5 that used to work...then by some cruel chance, the lbi file would no longer update it self into the 320 pages that it is set in.
If I re paste the lbi file from Assets back into the page code, it works again.
Here's my process... it asks to update all the 320 pages in the site (which, yes, are set in Manage Sites...)
Then I 'update', but the log says nothing updated (it does show a few updates here since I did repaste the .lbi link into a few test pages)
Pages that have the original lbi file pasted in no longer have the link highlighted in the off-yellow color and so do not get updated.
Newly pasted (and original...when the link was still connected and working) lbi files do have the link highlighted in the off-yellow and therefore do get updated when I save a change to the menu.lbi file.
BUT I have no idea why the link failed/stopped working!!
2 Questions
1. Why did the link suddenly fail?
2. Is there a way to re-link the menu.lbi file, or will I have to re-paste the menu.lbi file into all 320 pages?
Thanks for any help!
k

1. Does SSI work w/out a server?
No. (hence Server Side Includes - they're Include files which are included in the page by the server before delivery to the browser)
2. Can you point me to a tutorial that would help me understand/use SSI for a menu nav?
Try
http://foundationphp.com/tutorials/sprymenu/ssi.php
http://www.projectseven.com/products/menusystems/pmm2/ug-examples/includes/index.htm (commercial DW extension but the SSI tutorial applies to anything)
3. Can I assume that I would still need to alter the 320 pages to show where the SSI instance begins and ends?
Yes. Once and once only. You replace the .lbi code in the page with the SSI code then forget about it forever
Also...this still doesn't explain why my lbi link failed and whether there is a non-labor-intensive-fix for it.
No idea, I'm afraid.
No longer use Library files myself since I discovered SSIs several years ago.

Help File Won't Update

I am having a problem in getting an updated help file to show up in the program execution. The help file is <program_help/index.html>, and shows up correctly in both the Resources and Products Groups in XCode. That is, after modifying only some text in the index.html file the modified index.html correctly appears in the XCode editor. The path to the index.html file is (correctly) unchanged in the Groups & Files list. The info.plist also remains unchanged.
After a clean/rebuild, the correct modified <program_help/index.html> is located in the Contents folder of <build/Release/program>. However, when program is launched, either within XCode or in the Finder, the Help file accessed via the Help menu has not been updated, i.e., the older unmodified version of the index.html file is displayed from within the program.
I am obviously missing something - any suggestions will be appreciated.

I agree that it is probably a cached file somewhere. I have not been able to find it, though. I have trashed the ~/Library/Caches/com.apple.helpui folder and any other files I've found that reference the program in ~/Library - but the wrong help file still keeps turning up.
I've even tried to explicitly modify the com.apple.helpui/TOCCache.plist entry for the program with the pathname to the correct help file, but as soon as I call the help file in the program the TOCCache.plist file entry reverts to the the old version of the help file in an earlier version of the program.
I doubt that any of these exercises should be necessary, though. There must be some setting in XCode that should take care of getting the correct reference for the help file. I've looked and can not find anything at this point.
One step I will eventually take is to remove all possible sources of the old help file and then see what happens.

Source Control/ Files won't update

Hi,
I am using RoboHelp X5 with Visual Source safe 6.0. The
problem is more to do with the file or folder organization (I
think).
Basically we have folders setup in VSS set to our local
folders each author has on their machines. I joined my company a
year ago and noticed the mess of folders and files outside topic
folders (sub-folders) on my local drive. Then I learned its because
when we update certain project pages then check-in the project, the
pages/files update to the wrong location, meaning they update to
the main Project folder rather than the topic sub -folders that
Visual Source safe is set to. Therefore we are forced to copy these
updated pages outside the subfolders on our local drive and paste
to the appropriate sub/topic folders, then Check-in so that VSS
picks up the updated pages to deploy.
I noticed that certain projects within RoboHelp have folders
in the Project manager tab under HTML files and these projects
usually update to correct location when checked-in, but they also
have separate deployment paths for each sub folder within Visual
Source.
I can't figure out if the problem is with the deployment
paths or the folder setup in RoboHelp. I tested a project
deployment by creating a folder within RoboHelp to reflect the ones
on our local drive then I dragged a topic in this folder, updated
saved then checked in to realize the update was picked up in VSS
but when I deployed the page, the links on the this page wouldn't
work. Keep in mind the deployment settings for this particular
project are the same for all the sub-folders. Hence I have no idea
what the problem could be. Please Help. I would appreciate a quick
solution that doesn't keep our links and projects online from
working.
Thanks

Hi Robonetx5 and welcome to our community
I understand you are keen to find a solution to your issue,
but unfortunately, you have not followed the Forum Posting
Guidelines. You have immediately cross posted the same query into
two categories so far.
Click
here to see the original thread
Please take a moment to read the
Posting
Guidelines.
Cheers... Rick

Video file won't update

I keep having issues with these darn iPods! Ok well, my problem this time is this: I just finished converting a file from to mp4. I made sure my computer had the codec and everything first, and then when I finished converting it to MP4, I tried to add it to my library, but nothing happened. I tried changing the name of the file from 'Mortal Kombat II Annihilation' to 'Mortal Kombat II', and still when I press 'Open' nothing happens! Is it too late to save the file? Or perhaps is there another format iPods could read other than just MP4? Please help me out, thank you!

I believe the iPod supports more than just MPEG4.
Also supported are:
1. H.264 (mpeg4 variant)
2. M4V
3. MOV
"H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats"
Source: Apple iPod spec page (http://www.apple.com/ipod/specs.html)

IMac display issues: black icons and folders, doubled up files in finder windows, programs won't update

HELP!
I'm hoping someone can help with my iMac 27" purchased in 2010. From a previous discussion I started a year ago, I have had virtually nothing but trouble with it. After the internal hard drive crashing, I was able to install OS X on an external drive and used it for a good 8 months to drive my iMac and I took it to an expert who has replaced it with a 3tb HDD, but at some point the display has gone crazy. I am not certain if it is hardware, i.e. graphics card or video but I'll describe the symptoms and add some pics to see if anyone has seen this before and knows what the problem may be.
1.     90% of the screen was covered with white with just a portion of the desktop showing through.
        (This happened when I tried to reinstall OS X on the old HDD and the new one, but didn't happen when using OS X install disc)
2.     Files, folders, photos and some icons on the dock go black
3.     Files and photos double up when in Finder. When I'm viewing photos, it shows them but all the previous panes and the photos are jumbled behind the
        photos.
4.     Anything I open in Preview is completely black, but ColourSync Utility opens everything fine.
5.     Programs won't update. They will download onto my iMac but won't update. Some say, because I don't have OS X 10.6.8 others just won't open.
        Including Google Chrome, opens with two tabs open but when I open a third tab the rainbow wheel just turns. Skype won't open just gives a failure
        report.
6.     10.6.8 Update Combo downloads but when I restart the screen is covered in white - as in 1. and I have to reinstall OS X 10.6.2 to get the screen to               clear but then all the above problems continue.
7.     Sometimes videos don't display in Youtube, or the entire page other than the video player is covered in rainbow lines.
8.     Some buttons are blacked out on selection pages, i.e. system preferences, or saving screens
9.     Photos opened in FB go upside down and flicker all over the page as my mouse runs over them.
10.   Photos won't upload into internet editing programs.
I can't find anyone who has had the same issue in all of the discussions I've looked at, but it sounds like I have a video problem, but I wondered if it might be a software problem with flash or something. Or I have something malicious on my computer.
I also have an iphone 5 that faulted with the iTunes and USB icons and won't fix after trying one of those R-Sims, and I wondered if somewhere along the line it may have even had a virus/trojan/malware that has infected my external drive and then my internal drive. A reason I have thought that is because I have used my daughter's MacPro laptop and plugged in my external drive and I noticed the windows in hers were starting to do the same thing.
And on top of all that, my fans didn't work for over a year and I had to place an external fan at the back of the computer or it would overheat and shut down, but after resetting the SMU it started working again, but it is very noisy. I have tried to download SMC Fan Control and although it downloads to the HDD, it won't open.
Sorry its such a long post, I do hope with all of this information someone can help me.
Thanks so much.

HI and Welcome to Apple Discussions...
*Soon after, I installed Quake Wars, L4D 1, 2, Mass Effect 2, Need For Speed: Undercover, Mozilla Firefox and *Sophos Enterprise AV*. Approximately a week after installation, I began to experience malfunctions varying greatly*
Macs get grumpy when running anti virus software. Disable or completely uninstall Sophos A/V and see if that makes a difference. A/V software on a Mac will slow the drive down more and more as time goes on.
Also, check the vendor sites for each 3rd party software you installed to make sure they are compatible with 10.6.x
The "hard reboots" are a result of the system freezing due to incompatible or outdated software.
Carolyn
Message was edited by: Carolyn Samit

Cr2 files won't open I have PS CC and the latest CR update available.

I have a Canon Rebel XS, a fairly old camera.
It writes a cr2 file and PS won't open it.
PS shows a link tat says update CR and I have the latest update available.
Running PS CC and have the latest update.
MBP OS 10.9.3 with the latest CR update.
Does anyone have an answer for this prob?
Thanks in advance!
R

cr2 files won't open I have PS CC and the latest CR update available.
I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
Can anyone open it with DNG converter or Photoshop?
Neither of them work on mine.

Content Viewer won't update file on tablet

Hello. My content viewer on my Nexus 7 won't update all the way. What I mean is, the app comes up fine, and I've refreshed/archived it several times. The logo/picture in the content viewer next to the file updates, the viewer number updates, but the file itself is still showing the original version.
Any ideas how I can fix this or what is going on? I'm working on InDesign CS5.5 and just recently installed the Content Viewer on my Nexus 7.

I am having the same issue in CS6 Indesign. I try to preview using the desktop viewer and nothing happens, it silently fails.
I have uninstalled Indesign CS6 (including preferences), Uninstalled adobe Air 3.3. Uninstalled the content viewer.
rebooted, reinstalled air rebooted, reinstalled Indesign CS6 rebooted...
And it still doesn't work!
I think it may be to do with AIR rather than InDesign because it goes through the progressbars in InDesign and I have previously a BETA version of AIR that caused an issue else where, even though this is now uninstalled and the latest release of AIR is installed it still is failing to comunicate with AIR.
Any ideas...
thanks Geoff

After a itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this?

I have two anserws I think might work for you. The first one is: This solved the issue down loading and re-installing Quicktime 7.5.5
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
I'd create a backup of the System / Components and Quicktime folders first though, just incase you need to revert back.
and the 2nd one is:
I HAVE A FIX...AND IT WORKS!!!!!!!!! Actually a friend found this fix somewhere else, but I just did it and it worked. The only rub is you need to have access to another system that has not been updated to iTunes 10.5 or QT 7.7.
On the system that has not been updated, go to:
MAC HD/System/Library/Components and copy that folder to an external drive...next go to
MAC HD/System/Library/QuickTime and copy that folder to an external drive.
On the system that is not working, go to the same places on the MAC HD and delete those two folders. Then copy the folders from your external drive to the same location. Restart you system...i did it twice...and everything should be back to normal. This has worked on both systems here that were previously jacked up. If you do not have access to a system that was not messed up, let me know and maybe we can swap files.
I havent tried any of these yet because I'm in the middle of a project and I dont wnat anything to go wrong right now. After I'm done I will be sure to get started on one of these.
If you try any one of these let me know how it works out.

After an itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this.

Take a look at this thread...
https://discussions.apple.com/thread/3385122

Can't open Keynote files after last update. I created the files with Ipad 2, the same Ipad which won't open the files now. No Mac involved. What can I do to habe access again?

Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?

Finally, this helped me:
https://discussions.apple.com/message/23602871#23602871

Windows server 2008 R2 won't update

I have a Windows Server 2008 R2 which won't install updates coming from a WSUS server. All other servers are installing updates fine. They fail with the code 52D. If i look at the Application Event log i can see the install start but then
each update fails with the following events and IDs:
Event ID: 11325
Product: Microsoft Office professional Plus 2010 -- Error 1325. 'administrator' is not a valid short file name
Event ID 1024
Product: Microsoft Office Professional Plus 2010 - Update 'Update for Microsoft InfoPath 2010 (KB2817369) 32-Bit Edition' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software
packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
Both events have the source as MsiInstaller
Also i have an update for Adobe Reader which is an .msp file which also won't install and gives the error message:
Error 1325.administrator is not a valid short name file.
I have a feeling this has something to do with Windows Installer but i'm unsure how to fix it.
Please help
Thanks

Hi,
2014-05-14
14:30:03:921 5336   16a8
Handler         MSP Error List:
2014-05-14
14:30:03:921 5336   16a8
Handler         1: 1325 2: administrator
2014-05-14
14:30:03:921 5336   16a8
Handler
: MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2014-05-14
14:30:03:921 5336   16a8
Handler
: WARNING: First failure for update {5D5C9291-182E-48CD-B1CB-B245E9BB5B0B}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = CostFinalize
2014-05-14
14:30:03:922 1148   1878
AU      >>##
RESUMED ## AU: Installing update [UpdateId = {8AF4924E-500A-4AFF-B4DB-C64E9F0C7102}]
2014-05-14
14:30:03:922 1148   1878
AU      # WARNING: Install failed, error = 0x80070643 / 0x0000052D
2014-05-14
14:30:03:922 5336   16a8
Handler
: WARNING: Operation failed at update 0, Exit code = 0x8024200B
The log is filled with such kind of errors. And based on these message, I found some valuable information that worth a try.
What causes error 0x80070643 / 0x0000052D ?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4f64bcbe-54dc-4e66-a83c-dfc2cdc0fb7e/what-causes-error-0x80070643-0x0000052d-
Error 0x80070643 with Office 2010 Patches KB2553065 KB2584066 KB2553091
http://social.technet.microsoft.com/Forums/windowsserver/en-US/df31233e-fdd8-4c2f-b0db-6767cd4a0822/error-0x80070643-with-office-2010-patches-kb2553065-kb2584066-kb2553091?forum=winserverwsus
The two thread discussed the same error with solution in it. And the following article applied up to office 2007. But the article reviewed at September 12, 2011. Not 100 percent
sure if it applied, but you can have a try.
If you disable the Ose.exe file, Microsoft Office updates do not install when you use Microsoft Windows Server Update Services or the Microsoft Update Web site to deploy software
updates and hotfixes to computers in the organization
http://support.microsoft.com/kb/903774
Hope this helps.

AR 9.32 Won't update or uninstall

As the title states, AR 9.32 Won't update or uninstall
I cant open PDF files for school and this is very fustrating...thank you

There can be many reasons why you are not able to open pdf.Probably your pdf files are corrupt.If you are facing this problem with all the pdf files then it implies your Reader 932 is corrupt.In that case do the following to to reach 934(latest version of Reader)
•Download the Windows Installer Cleanup Utility from http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html and run it;
•Run the tool from Start >Programs >Windows Install Clean Up;
•Select 'Adobe Reader' and click the "Remove' button; close the tool;
•Download the 9.3.3 installer http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.3/enu/AdbeRdr933_en_US.exe and run it;
•Download the 9.3.4 update http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.4/misc/AdbeRdrUpd934_all_incr.msp and run it.

My iTunes won't update on my computer. I have windows vista. I can open iTunes and when I click "check for updates" it asks if I want to update to iTunes 11.1.5 and I click "Download iTunes" but then nothing happens. What's wrong?

My iTunes won't update on my computer. I have windows vista. I can open up itunes and when I click on "check for updates" it asks if I want to download iTunes version 11.1.5 and I click "Download iTunes" but then nothing happens. Sometimes uptop the loading bar will appear but for only a split second. I have tried restarting, shutting down, I cannot figure out why it won't download. What's happening and how do I fix it?

Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

9.2 MUI .msp file won't update 9.1.3?

Similar Messages

Maybe you are looking for