9.3.1- Not able to see more than 1 errors in application.log file

Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazz

Hey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

Similar Messages

Not able to see more than one period in DRP Planning Book

Hi
Where do we set the no of periods( days, weeks etc) that should be visbile in the DRP planning book in the SAP SPP.
Also we are getting invalid periodicity in this planning book, when we select one of the available timebucked profile ids. Any clues on this ? How to set it correct?
Regards,

i think like in any other planning book, it should be in the Data view tab in the TB future.
you need to create time bucket profiles though that have the periods you need. And these periods need to be equal to or greater than the Storage bucket profile used in the linked planning area

Not able to view more than two line in table control

Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

Not able to select more than two values

Based on picklist.fmb, I created a list item in a form.
I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
Anything I did mistake or picklist won't support picking more than two values using CTRL?
Also I am not able to get the scroll bar attaching to this list item.
Please advise.
Thank you,
Prasad

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Not able to update more than 10,000 records in CT04 for a characteristic

Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

I am not able to see "Edit Mode on" when i log into workspace...

I am not able to see "Edit Mode on" when i log into workspace...through Weblogic user...Oracle BPM 11g

If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083

Not able to save more than 2000 characters

Databse - SQL server 2000
I am using jdbc to save some text in sql server 2000 database. column is of type ntext.
If text is more than 2000 character, i am getting an error.
I tried changing the connection setting to sendstringparameterasunicode=false. After setting this property i am able to save more than 2000 characters, but i am not able to save some special characters. eg - . I am not able to save “abc” but i can save "abc". So it is not recongnizing the double quotes in the first scenario.
Amit
Edited by: rushtoamit on Feb 22, 2010 8:48 AM

No idea. But it isn't a java nor jdbc (general problem.)
Thus if you are seeing something that tells you it is too big it either comes from the driver or the database.
So your solutions are
1. Use a different database and driver
2. Use a different driver
3. Modify your code

Not able to scale more than 1500 users when using apache (OHS),why ?

Hi,
When scale more than 1500 users, my applications response time degrades.If i use IIS as my webserver I am able to scale more than 3000 users, is there any bottleneck in the oracle apache (OHS) ?
OHS Config
Timeout = 300
KeepAlive = ON
MaxKeepAliveRequests = 100
KeepAliveTimeout = 15
MaxRequestsPerChild = 0
ThreadsPerChild = 5000
SendBufferSize = 16384
MaxClients = 5000
Regards
Vino joy

Hi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM

Not able to edit more than one function of new photos

I recently upgraded my iPhoto to 09 after shifting to Leopard 10.5 on my G5. Today, for the first time after the upgrade, I loaded about 100 photographs and have found that I am unable to edit more than one function at a time on these image. For example, the image contrast can be adjusted, but, following that, no other function or cropping appears to work. The saved image, after selecting "Done", doesn't show any change other than the initial edit. Surprisingly, I am able to perform multiple edits on the images that were already in the Library (8,500!). After looking at this forum's topics and trying some of the suggestions provided for other editing issues, I've tried to edit more than one function in full screen view, library and album modes with no success.
Any help would be appreciated.
thanks,
Message was edited by: Umnak ( showed incorrect OS on original)

If you go the PS or PSE route this many be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

Advanced table:not able to view more than 10 rows when called from workflow

Hi everyone,
I'm calling a page that contains advanced table and its controller class from two places.
First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
Please help me!!
Thanks
Sunny

Thanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.

6th Nano-Not able to sync more than 8gb from seleted music catagories

Hello, I have an Ipod Nano 8GB 6th Gen.
I would like my nano to function pretty much like my 2gb shuffle. My 2gb shuffle will randomly autofill with playlists i have created that are usually greater than 2gb by randomly picking 2gb worth of music from that playlist.
I am having trouble syning music to my 8gb nano. I easily have more tha 8gb of music on my computer. I would like to randomly sync different playlist/genres of music that I select onto my ipod but I receive errors that there is not enough space when ever I have checked off portions of genres that exceed 8 gb of music.
Seems like my only options to sync music is either for itunes to randomly fill my ipod with my entire music library or I have to choose genres,artist that are less than 8gb.
Is here a way to for itunes to randomly sync music to my nano that I have selected catagories that I have choosen(genres, podcast, artist, etc) that is in excess of 8gb or can this only be done by my entire music library.
Thank you for your help

Hi AmishCake.
Many thanks for your recommendations. However, I have done all the recommendations that you have suggested. In fact, Apple Support staff has forwarded my problem to their Engineering Team. Apple has recognized that it is a problem. Apple had the diagnostic files on this problem. My main issue is that Apple is NOT able to provide me a date when this sync problem can be resolved. All they say is that they are investigating. So how does one feel when the problem has been outstanding for almost two months?
In fact, I suggested that Apple send me a replacement working Iphone 5S but they could not. It seems that they have tested this problem on their side & it is still there. So now I become very frustrated. I thought I bought a quality Iphone 5S!!!!
All I am asking is help from this community is what options do I have to seek advice on how to make it be known to senior management of Apple that there is no urgency from the Engineering Team on problem resolution.
It is very much appreciated if someone can provide me an email address of the person in Apple who can look into this outstanding problem as it seems it is not moving at all.
Many thanks in advance for all the cooperation.
Best Regards

Urgent: Not able to import more than 5 rows

Hi,
I'm trying to import data from the excel sheet using sql developer. I map the columns of the excel sheet with the table columns. I'm able to see the first 5 rows of the excel sheet in the data preview section. The same 5 rows is only inserted into the table. The remaining rows are not inserted. Is there any file that needs to be configured, regarding the number of rows to be inserted?
Appreciate your time.

Hi,
I use sqldeveloper-1.1.2.2579.When I run the tool in console mode I get the following :-
D:\Softwares\sqldeveloper-1.1.2.2579\sqldeveloper\sqldeveloper\bin>sqldeveloper.exe
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=D:\Softwares\sqldeveloper-1.1.2.2579\sqldeveloper
Using ide.user.dir=null
Addin: Translator PlSql is trying to register a input type (.plsql) which conflicts with translator PlSql who already using this input type

Not able to add more than one gift for the GWP promotion.

Hi,
I have created a GWP promotion. This promotion is adding gift after adding corresponding product to cart. But, when I try to add the product second time, it's not adding the gift. I am using ATG 10.1.1 with CRS. In ATG merchandising guide, it is mentioned as GWP promotion will add gift only once.
How can we add gift second time?

The GWP templates create a "when" type of promotion, which means the rule is applied once. That matches the behavior you're seeing. If you want the rule to be applied more than once, you need a "for next" type of promotion. You've got two basic choices for how to do that.
If you've got one GWP promotion for which you want the "for next" behavior, you can create the promotion using the Advanced Condition and Offer option in the UI.
If you anticipate creating many "for next" GWP promotions, then it would probably be worthwhile to create one or more new templates. You can start with a copy of an existing GWP template and change the pmdlrule property. To see the effect of "for next' on a pmdl rule, either create an Advanced promotion or look at one of the non-GWP templates that get applied more than one, such as bogo. Details about creating your own templates appear in the "Adding New Promotions Templates" section of the "Understanding Promotions" chapter in the Commerce Programming Guide.
Before you put "for next" style GWP promotions into production, please be aware that some bugs have been discovered related to the manual addition and removal of gift items. A hot fix is available from Oracle Support.

Not able to create More than 1 Partition in USB Drive using kernel32 and DeviceIoControl

I have successfully created 2 or more partitions in USB drive using DeviceIoControl in C++. Now I am trying to convert this code into C# using kernel32 and DeviceIoControl. But I am not getting more than 1 partition. Can anybody tell me what is wrong
with this code?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Diagnostics;
using System.Runtime.InteropServices;
namespace PartitionWrapper
public class IOWrapper
public static bool CreatePartitions(string selectedDrive)
bool RetCode = false;
try
bool bSuccess = false;
uint dwBytesReturned = 0;
IntPtr hDisk = OpenVolume(selectedDrive);
if (hDisk == null || hDisk == FSConstants.INVALID_HANDLE_VALUE)
RetCode = false;
goto FINAL;
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_DELETE_DRIVE_LAYOUT, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
// Get the partition information
uint PartitionInfomations = (uint)(Marshal.SizeOf(typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX)) + 3 * Marshal.SizeOf(typeof(FSStructures.PARTITION_INFORMATION_EX)));
byte[] DBuffer = new byte[PartitionInfomations];
GCHandle handle = GCHandle.Alloc(DBuffer, GCHandleType.Pinned);
FSStructures.DRIVE_LAYOUT_INFORMATION_EX pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(handle.AddrOfPinnedObject(), typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
IntPtr pDriveLayoutPtr = Marshal.AllocHGlobal(Marshal.SizeOf(pDriveLayout));
Marshal.StructureToPtr(pDriveLayout, pDriveLayoutPtr, false);
// bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_GET_DRIVE_LAYOUT_EX, default(IntPtr), default(uint), pDriveLayoutPtr, PartitionInfomations, ref dwBytesReturned);
pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(pDriveLayoutPtr, typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
if (bSuccess || dwBytesReturned != PartitionInfomations)
RetCode = true;
else { RetCode = false; goto FINAL; }
pDriveLayout.PartitionEntry = new FSStructures.PARTITION_INFORMATION_EX[0x16];
pDriveLayout.PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionCount = 4;
pDriveLayout.DriveLayoutInformatiton.Mbr.Signature = 0xA4B57300;
pDriveLayout.PartitionEntry[0] = new FSStructures.PARTITION_INFORMATION_EX();
pDriveLayout.PartitionEntry[0].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionEntry[0].Mbr.BootIndicator = true;
pDriveLayout.PartitionEntry[0].Mbr.RecognizedPartition = true;
pDriveLayout.PartitionEntry[0].Mbr.PartitionType = 0x0B;
pDriveLayout.PartitionEntry[0].PartitionNumber = 1;
pDriveLayout.PartitionEntry[0].StartingOffset = 32256;
pDriveLayout.PartitionEntry[0].PartitionLength = 3221225472;
pDriveLayout.PartitionEntry[0].RewritePartition = true;
pDriveLayout.PartitionEntry[0].Mbr.HiddenSectors = 32256 / 512;
pDriveLayout.PartitionEntry[1] = new FSStructures.PARTITION_INFORMATION_EX();
pDriveLayout.PartitionEntry[1].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionEntry[1].Mbr.BootIndicator = false;
pDriveLayout.PartitionEntry[1].Mbr.RecognizedPartition = true;
pDriveLayout.PartitionEntry[1].Mbr.PartitionType = 0x0B;
pDriveLayout.PartitionEntry[1].PartitionNumber = 2;
pDriveLayout.PartitionEntry[1].StartingOffset = 32256 + 3221225472;
pDriveLayout.PartitionEntry[1].PartitionLength = 2147483648; //2147483648;//3221225472;
pDriveLayout.PartitionEntry[1].RewritePartition = true;
pDriveLayout.PartitionEntry[1].Mbr.HiddenSectors = 32256 / 512;
for (int i = 0; i < pDriveLayout.PartitionEntry.Length; i++)
pDriveLayout.PartitionEntry[i].RewritePartition = true;
try
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_SET_DRIVE_LAYOUT_EX, ref pDriveLayout, PartitionInfomations, default(IntPtr), default(uint), ref dwBytesReturned);
catch (Exception ex)
if (bSuccess)
RetCode = true;
else { RetCode = false; }
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_UPDATE_PROPERTIES, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
if (bSuccess)
RetCode = true;
else { RetCode = false; }
FINAL:
// Close the disk handle.
if (hDisk != null && hDisk != FSConstants.INVALID_HANDLE_VALUE)
FSStructures.CloseHandle(hDisk);
catch { return false; }
return RetCode;
private static IntPtr OpenVolume(string DeviceName)
try
IntPtr hDevice;
hDevice = FSStructures.CreateFile(
@"\\.\" + DeviceName,
FSConstants.GENERIC_EXECUTE | FSConstants.GENERIC_READ | FSConstants.GENERIC_WRITE | FSConstants.FILE_SHARE_READ | FSConstants.FILE_SHARE_WRITE,
FSConstants.FILE_SHARE_WRITE,
IntPtr.Zero,
FSConstants.OPEN_EXISTING,
0,
IntPtr.Zero);
if ((int)hDevice == -1)
throw new Exception(Marshal.GetLastWin32Error().ToString());
return hDevice;
catch { return FSConstants.INVALID_HANDLE_VALUE; }
internal static class FSConstants
public const uint FILE_SHARE_READ = 0x00000001;
public const uint FILE_SHARE_WRITE = 0x00000002;
public const uint OPEN_EXISTING = 3;
public const int GENERIC_EXECUTE = 0x10000000;
public const uint GENERIC_READ = (0x80000000);
public const uint GENERIC_WRITE = (0x40000000);
public static IntPtr INVALID_HANDLE_VALUE = new IntPtr(-1);
public const uint IOCTL_DISK_GET_DRIVE_LAYOUT_EX = 0x00070050;
public const uint IOCTL_DISK_SET_DRIVE_LAYOUT_EX = 0x7C054;
public const int IOCTL_DISK_UPDATE_PROPERTIES = 0x70140;
public const int IOCTL_DISK_DELETE_DRIVE_LAYOUT = 0x0007c010;
public const int IOCTL_DISK_CREATE_DISK = 0x7C058;
internal static class FSStructures
[DllImport("kernel32.dll", EntryPoint = "CreateFile", SetLastError = true)]
public static extern IntPtr CreateFile(
string lpFileName,
uint dwDesiredAccess,
uint dwShareMode,
IntPtr lpSecurityAttributes,
uint dwCreationDisposition,
uint dwFlagsAndAttributes,
IntPtr hTemplateFile);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern int CloseHandle(IntPtr hObject);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern bool DeviceIoControl(
IntPtr hDevice,
uint dwIoControlCode,
[Optional]ref DRIVE_LAYOUT_INFORMATION_EX lpInBuffer,
uint nInBufferSize,
[Optional] [Out] IntPtr lpOutBuffer,
uint nOutBufferSize,
[Optional] ref uint lpBytesReturned,
[Optional] IntPtr lpOverlapped);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern bool DeviceIoControl(
IntPtr hDevice,
uint dwIoControlCode,
IntPtr lpInBuffer,
uint nInBufferSize,
[Optional] [Out] IntPtr lpOutBuffer,
uint nOutBufferSize,
[Optional] ref uint lpBytesReturned,
[Optional] IntPtr lpOverlapped);
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_EX
public PARTITION_STYLE PartitionStyle;
public int PartitionCount;
public DRIVE_LAYOUT_INFORMATION_UNION DriveLayoutInformatiton;
[MarshalAs(UnmanagedType.ByValArray, ArraySubType = UnmanagedType.Struct, SizeConst = 0x16)]
public PARTITION_INFORMATION_EX[] PartitionEntry;
[StructLayout(LayoutKind.Sequential)]
public struct PARTITION_INFORMATION_EX
[MarshalAs(UnmanagedType.U4)]
public PARTITION_STYLE PartitionStyle;
public long StartingOffset;
public long PartitionLength;
public int PartitionNumber;
public bool RewritePartition;
public PARTITION_INFORMATION_MBR Mbr;
public PARTITION_INFORMATION_GPT Gpt;
[StructLayout(LayoutKind.Sequential)]
public struct PARTITION_INFORMATION_MBR
public byte PartitionType;
[MarshalAs(UnmanagedType.U1)]
public bool BootIndicator;
[MarshalAs(UnmanagedType.U1)]
public bool RecognizedPartition;
public uint HiddenSectors;
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
public struct PARTITION_INFORMATION_GPT
public Guid PartitionType;
public Guid PartitionId;
[MarshalAs(UnmanagedType.U8)]
public EFIPartitionAttributes Attributes;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)]
public string Name;
[Flags]
public enum EFIPartitionAttributes : ulong
GPT_ATTRIBUTE_PLATFORM_REQUIRED = 0x0000000000000001,
LegacyBIOSBootable = 0x0000000000000004,
GPT_BASIC_DATA_ATTRIBUTE_NO_DRIVE_LETTER = 0x8000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_HIDDEN = 0x4000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_SHADOW_COPY = 0x2000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_READ_ONLY = 0x1000000000000000
[StructLayout(LayoutKind.Explicit)]
public struct DRIVE_LAYOUT_INFORMATION_UNION
[FieldOffset(0)]
public DRIVE_LAYOUT_INFORMATION_MBR Mbr;
[FieldOffset(0)]
public DRIVE_LAYOUT_INFORMATION_GPT Gpt;
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_GPT
public Guid DiskId;
public long StartingUsableOffset;
public long UsableLength;
public int MaxPartitionCount;
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_MBR
public uint Signature;
public enum PARTITION_STYLE : int
MasterBootRecord = 0,
GuidPartitionTable = 1,
Raw = 2

Hello,
in the links below you can found many informations to help you:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa365730(v=vs.85).aspx
http://www.codeproject.com/Articles/696388/Recover-Data-From-Corrupted-Drives-File-Systems-FA
http://www.functionx.com/vcsharp/fileprocessing/drives.htm
http://forums.codeguru.com/showthread.php?548305-partitioning-USB-Falsh-drive
http://forums.codeguru.com/showthread.php?548169-USB-Flash-drive-Partitioning

9.3.1- Not able to see more than 1 errors in application.log file

Similar Messages

Maybe you are looking for